Men's knitted melange jacket with zipper
Differing data for size 52/54 are given in parentheses. If there is only one number, then it applies to both sizes. To you you will need: Auster-mann yarn “Smaragd Classic” (100% wool; 125 m/50 g) - 500 (550) g each green and sea green; knitting needles No. 6 and 7; circular knitting needles No. 6, length 60 cm; detachable zipper 65 cm long.
Attention: knit the product in 2 threads, connecting a green thread with a sea green thread. All details are knitted with chain edges. Edge edge “chain”: in each row, knit the 1st stitch with the front stitch crossed, remove the last loop, as in purl knitting, with the thread in front of the loop.
Rubber:
alternately 1 knit, 1 purl. Facial surface: front rows - facial loops, purl rows - purl loops.
Structural pattern: knit according to the pattern. The numbers on the right indicate the front rows. In purl rows, knit loops according to the pattern. The distribution of the pattern in width is given in the description of the details; repeat repeat = 4 stitches before the middle between arrows a and b and after the middle between arrows c and d. In height after 8th r. repeat from 1st to 8th row. Knitting density: 14 p. x 20 r. = 10 x 10 cm, knitted in a structural pattern using knitting needles No. 7.
Jacket pattern:
Back: cast on 86 (92) sts in 2 threads on knitting needles No. 6 and knit 6 cm = 13 r. with an elastic band, and start from the purl row. Continue working with a structural pattern using knitting needles No. 7 in the following sequence: edge, 1 (4) sts before arrow a, 9 repeats = 36 sts from arrow a to b, 10 sts from arrow b to c = middle, 9 repeats = 36 p. from arrow c to d, 1 (4) p. after arrow d, chrome. After 35 cm = 70 rub. close from the elastic on both sides for the armholes, 2 p., then in every 2nd r. 4 times 1 p. = 74 (80) p. After 25 cm = 50 r. from the beginning of the armhole, close on both sides for shoulder bevels 9 (10) p., then in every 2nd p. 2 more times, 8 (9) sts each. Simultaneously with the 2nd shoulder decrease, close off the middle 14 sts for the neckline and finish both sides separately. To round the neckline, close from the inner edge in the 2nd row. 1 time 5 p. Finish the second side symmetrically.
Left shelf: cast on 47 (50) sts in 2 threads on knitting needles No. 6 and knit 6 cm = 13 r. with an elastic band, and start from the purl row. Continue working with a structural pattern using knitting needles No. 7 in the following sequence: edge, 1 (4) sts before arrow a, 9 repeats = 36 sts from arrow a to b, 8 sts from arrow b, edge. I will make an armhole and a shoulder bevel from the right edge, as on the back. At the same time after 18 cm = 36 r. from the beginning of the armhole, close 6 stitches from the left edge for the neckline, then in every 2nd row. 1 time 3 p., 1 time 2 p. and 5 times 1 loop.
Right shelf:
knit symmetrically to the left front, start the structural pattern from the 3rd p. after arrow b.
Sleeves: cast on 44 stitches in 2 threads on needles No. 6 and knit 6 cm = 13 r. with an elastic band, and start from the purl row. Continue working with a structural pattern using knitting needles No. 7 in the following sequence: edge, 4 repeats = 16 stitches from arrow a to b, 10 stitches from arrow b to c = middle, 4 repeats = 16 stitches from arrow c to d, edge . For bevels, add 7 p.m. on both sides. from the elastic band 1 p., then 12 times in every 6th p. 1 p. = 70 p. Added loops are sequentially included on both sides in the structural pattern. After 47 cm = 94 r. close from the elastic on both sides to roll 3 sts, then in every 2nd p. 2 times 2 p., 9 times 1 p., 3 times 2 p., 1 time 3 p. and 1 time 4 p. In the next row, bind off the remaining 12 loops.
Assembly: Pin the details onto the pattern, moisten and leave until dry. Make seams. Along the edge of the neckline, cast on 77 stitches on circular needles in 2 threads and knit a stand-up collar with an elastic band, starting after the edge with 1 purl loop. At a height of 6 cm, loosely close the loops according to the pattern. Sew a zipper from the bottom edge to the end of the collar. For the inner strips, cast on needles No. 6 in 2 threads of 4 stitches and knit 65 cm each in stockinette stitch, bind off the loops. Sew the strips over the zipper tape. Sew in the sleeves.
Who said men don't like to dress nicely? Fiction! In our world, people are greeted by their clothes. And therefore knitting for men could not be more relevant.
Apparently, manufacturers are not keeping up with the latest trends. Things for men are usually too strict or completely tasteless. Especially when it comes to provincial stores. If a person is not very versed in the intricacies of style, then buying clothes turns into a real nightmare.
What if clothes are bought for work or for an important event? And not just a stylish look, but also success depends on the result of shopping? Knitting for men is the solution to the problem.
Knitting range for men
Our website presents schemes for every taste. These are fashionable sleeveless vests that look so good with turtlenecks or shirts, and knitted sweaters, suitable for everyday work, and knitted slippers that will give you comfort after a hectic day.
Of course, we also present such items as knitted hats and scarves. IN winter time they will be the best protection against severe cold.
Knitting for men is done mainly in classic colors: gray, black, white. Such jackets and sleeveless vests in the best possible way Suitable for work environment. However, you can instantly spice up your look by wearing a bright wardrobe item underneath. knitted clothes. Such things are considered universal, because when skillfully combined they help create any image.
For men, lovers of brighter colors, we also have diagrams. But even when choosing classic tones, you can be sure that the knitting pattern will make the item original and eye-catching.
Our patterns and instructions are suitable for all men who want to create a presentable image for work, who love style and aesthetics, who simply want to dress warmer, because everyone knows that knitted items keep you warm best.
Each diagram is accompanied by a photograph that will allow you to understand what your work will look like at the end of the work. Also given detailed instructions, which can be understood by a person who has never been interested in knitting before. All you need to do is purchase all the necessary materials and get to work.
For those who love to knit, the hot season is coming. For autumn and winter, you definitely need to give your loved ones something new. Knitting for men occupies a special place in needlework (2019 fashion models with descriptions are given below in the article). Knitting for your beloved man or son is a pleasure. It is important to choose a model that will please its owner and correspond to fashion trends.
Let's look at modern models of sweaters and hats for men that you can knit yourself with knitting needles. Before you start working, you need to choose a suitable thread.
Choosing yarn for a men's sweater
For a sweater, even a man's one, you need to choose soft and non-prickly yarn. For warm sweater It makes sense to choose a yarn that contains wool. It could be 100% wool thread merino or alpaca or with the addition of acrylic.
Men's pullovers and sweaters look great made from cotton. For them you need to choose a thread that is not very thick, you can use cotton with acrylic. Select knitting needles for the yarn according to the knitting density or according to the recommendations on the package of the skein.
The color should be guided by the preferences of the man who will wear the sweater. But there are also fashion trends and trends for knitting for men; the article below contains 2019 models with a description of knitting a stylish sweater and a selection of colors.
Yarn for men's hats
For this item of clothing, a woolen thread made of soft fiber, with the addition of acrylic, silk or pure form. In terms of thickness, you can choose absolutely any thread, depending on the pattern and idea. For autumn hats, you can take a thin thread and knit braids; for a winter hat, a thread of medium thickness and a more dense pattern is suitable.
Of the wool threads, merino, alpaca, and mink wool are considered the softest. But these are also the most expensive options. You can choose budget yarn that contains wool and acrylic in half or in another proportion. Such a thread can also be soft and not at all prickly, but for a headdress this is very important, since the product is in close contact with the body.
Descriptions and diagrams of stylish men's sweaters
Today, pullovers and chunky knit sweaters are quite popular. This is great for men stylish option under jeans or trousers. For such a sweater, you need to choose bulky yarn, with a meter of at least 200 or 100 meters in a 100 gram skein. You can choose a completely simple knitting method: pearl pattern, garter stitch or elastic. Or knit a pullover with a braid pattern. Sweater made of bulky yarn with simple pattern It will be a very stylish and fashionable wardrobe item.
Continuing the theme of knitting for men, here are several fashionable models of 2019 with descriptions and diagrams.
Jacquard sweater
For this stylish pullover with jacquard pattern you will need:
- dark olive thread 650 gr. thickness at the rate of 125 meters per 50 grams. Light milky yarn 150 g;
- knitting needles No. 3, 3,5 and 4.
Patterns used:
- knit stitch: in knit rows we knit knit stitches, in purl rows we knit purl stitches;
- The jacquard pattern is knitted according to the pattern (given below) in satin stitch with a change of thread, according to the drawing.
Let's get started:
- First we knit the back piece. On knitting needles No. 3, cast on 152 loops with olive thread and knit several rows with a 2*2 elastic band. The elastic should be 7 cm wide. This is approximately 28 rows. Change the knitting needles to number 3.5 and add 1 loop on both sides from the edge. We knit in stockinette stitch until the fabric reaches 31.5 cm. We change the knitting needles to number 4 and start knitting jacquard pattern according to the scheme. At the same time, at a height of 45 cm, close the armholes on each side to decrease 2 times 3 loops, 3 times 2 loops, 6 times 1 loop and continue knitting to the neckline. At a height of 72 cm, bind off the middle 39 loops for the neckline and knit the shoulders separately, 1 cm each, and bind off all loops.
- Then we knit the front piece. It is knitted in the same way up to the neckline, it is made a little deeper than on the back and the middle 29 loops need to be closed at a height of 63 cm.
- We make the sleeves like this: on knitting needles No. 3 we cast on 74 loops with olive threads and knit 7 cm with a 2*2 elastic band. Next, we switch to needles No. 3.5 and knit in satin stitch. At the same time making additions to widen the sleeves according to the pattern. At the height in front of the armhole there should be 111 loops. At a distance of 32.5 cm from the edge you need to start making the jacquard pattern. Then continue with olive thread in stockinette stitch. We begin to form the sleeve cap, closing the loops in this order on both sides: 1 time 3 loops, 6 times 2 loops, 11 times 1 loop, 6 times 2 loops, 2 times 3 loops and close the remaining loops.
A stylish, warm, cozy and beautiful jumper for a man is ready.
Knitted pullover “Chess game”
Another stylish and very simple men's pullover, made with knitting needles. Its highlight is that due to the combination of front and back loops, relief stripes and squares are obtained. This thing is noble and refined. Blue color adds style and restraint to the look.
For this stylish pullover you will need:
- yarn of dark rich blue color 850 gr. thickness at the rate of 80 meters per 50 grams. It can be either wool or cotton;
- knitting needles No. 5.
Patterns used:
- rib 2*2: alternately knit 2 knits and 2 purls in the front rows, and in the purls according to the pattern;
- rib 8*2: alternately knit 8 knits and 2 purls in knit rows, and in purl rows according to the pattern.
The chess pattern is performed according to the scheme below:
- We start work from the back. We cast on and knit 8 cm on the knitting needles with a 2*2 elastic band, then we make a checkerboard pattern according to the pattern, simultaneously adding 1 loop from each edge. At the height after the 36th row from the right edge we knit the first 10 loops with an 8*2 elastic band, and continue to knit the remaining loops checkerboard pattern, then after 12 rows we also knit the next 10 loops with an 8*2 elastic band, and so we repeat until we have diagonally finished converting all the chess squares into an elastic band.
- At the same time, at a height of 45 cm, close the armholes on both sides 2 times with 3 loops, 2 times with 2 loops, 3 times with 1 loop and continue knitting to the neckline. At a height of 72 cm, bind off the middle 26 loops for the neckline and knit the shoulders separately, 1 cm each, and bind off all loops.
- Before we knit in the same way to the neckline, it is made a little deeper than on the back and the middle 26 loops need to be closed at a height of 63 cm.
- We knit the sleeves like this: on knitting needles No. 5 we cast on 42 loops, knit 7 cm with a 2*2 elastic band. Next we knit with a checkerboard pattern according to the pattern. At the same time making additions to widen the sleeves according to the pattern. At the height in front of the armhole there should be 64 loops. We begin to form the sleeve cap, closing the loops in this order on both sides: 1 time 3 loops, 1 time 2 loops, 14 times 1 loop, 1 time 2 loops, 1 time 3 loops and close the remaining loops.
- Then we assemble the parts by sewing the shoulder and side seams, sleeve seams and sewing the sleeve into the armhole.
- We design the neck in the form of a low stand made of 2*2 elastic. To do this, we raise the loops around the neck circumference and knit an elastic band to a height of 9.5 cm, fold it in half and stitch the edge.
Men's stylish knitted hats
Knitting for men is not limited to pullovers and sweaters; fashionable models of hats for 2019 with a description are given below. Today knitted hat very popular among the stronger half of humanity. It not only serves for warmth, but also performs a stylistic function, completing the set and shaping the image.
A simple hat with a turn-up is perfect for a man and will go well with a jacket, coat, vest, or sweatshirt. For it you will need to take a warm thread (with the addition of wool), not fluffy, regular, knitting needles of a suitable thickness.
- First you need to calculate the knitting density by measuring the volume of your head and knitting a small piece of yarn.
- Then cast on the required number of stitches on the knitting needles and knit with an elastic band 2*2 15 cm for the hem. Then continue with the same pattern throughout the entire depth of the cap. First close off half of the purl loops, knitting them 2 together, and then tie all the remaining loops with thread. Unfold the hem and sew the back seam. The hat is ready.
For winter excellent option There will be a knitted hat with earflaps. To prevent it from getting blown out in the winter cold, you can sew a fleece lining and sew it inside the hat.
For a hat with earflaps, first we knit the ears, then we knit the flap for the front of the hat (above the forehead). We distribute all the received parts on the knitting needle and cast on the required number of loops as follows: first we cast on half the loops for the back of the hat, then comes the eye, then comes the lapel for the forehead, then the eye and the second part of the loops for the back of the cap. We place it all on one knitting needle and begin knitting the main part of the hat according to the chosen pattern, either in satin stitch or in garter stitch until the entire height of the hat is knitted. Tighten the loops and make a back seam. You can crochet along the edge of the hat using the same thread or a contrasting color. It is better to secure the lapel on the forehead with a couple of stitches.
For men's hats, patterns with braids and plaits are good, the front stitch on men's hat will look discreet and elegant. I love it knitted hat for winter, you can knit it in 2 layers or insulate it with a lining made of fleece or knitwear.
Photo gallery: knitted hats (patterns)
In the “Knitting for Men” section you will find various models for the men’s wardrobe with patterns and descriptions. Sweaters, cardigans, baktus, vests, hats, jackets, pullovers, socks - ideas are suitable for both experienced knitters and crocheters, and for complete beginners. You can add variety to your everyday style thanks to a variety of design details - relief patterns, unusual color combinations, contrasting stripes, use melange yarn, various collar designs.
You can add elegance to your look if you choose one of the pullover patterns for knitting. Exquisite voluminous reliefs from braids, diamonds, cross elastic - and variations will wonderfully refresh men's style. And the feeling of comfort will be given by cotton, linen and viscose in the yarn. made of wool is suitable for cooler weather. Knitted in regular stockinette stitch, it doesn't look simple thanks to the combination of three colors, contrasting stripe and edging.
Great ideas for winter are sweaters or jackets made of wool or wool mixture. A distinctive feature is the intertwined braids that smoothly flow into the collar and hem trim. Volumetric diamonds combined with stripes give an unexpectedly interesting design effect to a sweater with a large turn-down collar. And a warm one with an asymmetrical zipper, stand collar and decorative hooks - perfect for unstable weather.
Vests are a wonderful wardrobe item that goes well with trousers, jeans, shirts and turtlenecks. And it easily fits into absolutely any men's style. A distinctive feature of a V-neck is a wavy voluminous pattern against the backdrop of the purl surface. Creative solution the second model with a small stand-up collar will not go unnoticed: the combination of gray yarn and blue melange creates an unusual but harmonious color alternation of stripes. The model with buttons alternates various knitting techniques - the “Putanka” pattern, braids, purl stitch, stockinette stitch, and the idea of this vest is completed by two small and convenient pockets.
In the “Knitting for men” section you will find other interesting clothing models for men with patterns and descriptions.
Excellent classic model- a jacket for men with knitting needles, description from the magazine Bergère de France n°150, Les Essentiels. Jacket with V-neck, 5-button fastening, set-in sleeves. Dimensions...
02.10.2019
This one fits men's sweater with tweed knitting needles (100 m/50 g) from bottom to top. First, on circular knitting needles, the front and back and 2 sleeves are knitted in one piece. And then these details...
25.03.2019
A men's pullover with a pattern of braids and arans is knitted with needles No. 3.5 from merino yarn. The main part of the pullover is made of pearl knitting, and the rectangular yoke is knitted with an aran pattern. Structural elastic...
Men's pullover with snood from Dolce&Gabbana
Model without description. Picture only. The V-neck is complemented by a removable collar, so no frost is scary.
I found a description of a similar sweater here http://www.vyazusama.info/forum/viewtopic.php?p=1626 
http://club.osinka.ru/topic-84768?p=4765322&highlight=#4765322
http://club.osinka.ru/topic-99114?p=7702747#7702747
http://club.osinka.ru/topic-112614
http://club.osinka.ru/topic-87362?start=0&highlight=
http://club.osinka.ru/topic-87362?p=5346075#5346075
http://club.osinka.ru/search.php?topic=87362&search_author=lyly1963
lyly1963 writes
description of the central pattern of the gray dress. The width of the repeat is 17 loops (on the wrong side it can be reduced by 2 but not necessarily finished form I didn’t see the difference) Row 1: 2 l 1 and 2 l 1 and 2 l 1 purl (center) 2 l 1 and 2 l 1 and 2 l. " row and all even ones according to the figure. 3 row: as the first. 5 row: 2 l 1 and * 2 l remove on the first additional needle for work 1 and on the second for work 2 l purl from the additional needle 2 l * 1 purl repeat between ** 1 purl 2 rows. 7 row - according to the picture. 9 row: * 2 rows on an additional knitting needle before work 1 purl on 2 additional knitting needles 2 knits 1 purl 2 knit 1 repeat 3 times. 11 row: according to the picture 13 row - as 5 15th row: according to the figure, 17th row as 9 19th row according to the figure 21st row as 5, purl only the crossed loops in the center 23rd row according to the pattern, repeat from the 1st row. In principle, this is a braided pattern with only a section of purl stitch. Other patterns are diamonds on 14 loops. - the height of the repeat is also 24 loops braid on 5 loops (cross 2 on top) the height of the repeat is 12 loops multiplied by 2, also 24 loops, knit in a mirror way.. Between the patterns the path is: 2 purl 1 knit 2 (knit the front one between the purls tighter otherwise). it will “fall apart”. On the sides there is the required amount of rice or confusion (I have 1 knit, 1 purl with a change in each row).
Method of knitting a sleeve from the top: let’s say when knitting from the bottom there is a finite number of loops before making decreases for the okat 60, then if you make it in the most common way, divide 60 by 2 = 30 (this is half) then divide the resulting number by 3 in our example this is 10 stitches, close 1) in every second row 3 3 2 2. 2) the second part, one st in every second row 3) part 2 3 3 and close the remaining ones, although each knitter has her own algorithm adapted for herself. We count the number of rows of the sleeve cap in our example: 18 multiplied by 2 = 36 rows (this is half) Now we cast on the knitting needles loosely so as not to pull 36 X2 = 72, you can have a reserve in the middle, start knitting 4 loops, then add as in partial knitting on each side the number of loops in the reverse order you can cast on the first row using an auxiliary thread, the main thing is that the fabric does not pull and we knit further down, decreasing to the cuff. This method, of course, requires a little mathematics, but it is convenient to distribute the pattern in height and determine the length. Although you can add loops along the edges, usually they still go into the seam. The advantage of knitting the fronts and back from top to bottom is that it allows you to more accurately determine the waist line and solves the problem matching rapports on the sleeves and the main part
