Openwork blouse with sleeves " bat» very comfortable to wear. This blouse can be worn with or without a turtleneck. Great option for cool days. The size of the finished product is 46 Russian. Difficulty level: hard.
To work you will need:
- 350 g of Merino Gold yarn (60% wool - 40% acrylic; 100g - 400m);
- Hook No. 4;
- Knitting needles No. 2.
Description of the process of crocheting an openwork blouse with a batwing sleeve:
In order to start knitting, you need to make a pattern according to your measurements, and also knit a reference size.
Pattern for knitting a blouse with batwing sleeves:
Knitting pattern for a blouse with batwing sleeves:
Knitting back
Dial a chain of 133 air loops– 7 repeats of openwork pattern. Knit 19 cm openwork pattern according to the scheme, making an extension on both sides of the canvas. Be sure to make a pattern that matches your measurements and, as you knit, regularly apply the back fabric to the pattern. At a height of 19 cm, the knitted back fabric should be 1 m wide. Knit another 30 cm, which corresponds to the width of the sleeve.
Knitting front
Knit the front fabric, completely copying the back.
Assembly
Sew side seams. Sew 35 cm from the top of the sleeve to the center, repeat from the edge of the other sleeve, leaving 30 cm in the middle for the neckline.
Tie the neck and edges of the sleeves in one row, and in one row.
Blouse binding
From the bottom of the blouse, cast on 240 stitches and knit 60 rows (14 cm) with a 2x2 elastic band.
We hope everything worked out for you.
Share your result with us and leave comments.
Jumper with dolman sleeves from designers Lana Grossa made mesh pattern. It is decorated with a central panel with a diamond pattern and a patent elastic band.
Design by Lana Grossa
(translation from English made for the website www.site)
European size 36/38 (40/42, 44/46)
Description given for smaller size. The differences for larger sizes are shown in parentheses. When one size is given, it applies to all.
Materials
Yarn Lana Grossa Portofino (60% cotton, 40% polyamide) 115 m/50 g 650 (700, 750) g (pictured color Lilac (col. 8).
Straight knitting needles 3.5, 4 and 4.5 mm, circular 4 mm long 40 cm, additional knitting needle for braids
Rib: k1, p1.
“Waffle” pattern (stitches should be a multiple of 3 + 2 stitches). Knit according to pattern 3. The front rows are indicated on the right; on the wrong side, knit all the loops and yarn overs with purl loops. First knit the pattern before the first arrow, then 3 stitches between the repeat arrows, finish the pattern with loops after the second arrow. Repeat row 1-4.
Pattern “Rhombuses” (performed on 21 loops according to scheme 1). The facial rows are indicated on the right. On the wrong side of the loops, knit the way they look. Repeat rows 1-28.
Patent elastic (knitted on an odd number of loops) according to pattern 2. The front rows are indicated on the right, the purl rows on the left. Repeat repeat 2 rows. Count the loop and yarn over as 1 stitch.
Knitting density
Using 4.5 mm needles, 16 sts and 26 rows = 10 x 10 cm in Waffle pattern; 21 stitches and 26 rows in Diamond pattern = 9 x 10 cm; 20 stitches and 31 rows = 10 x 10 cm patent rib.
Description
The sweater is knitted in one piece over the shoulders, starting from the bottom edge of the front.
Using 4mm needles, cast on 97 (103, 109) sts for front.
Next row (IS):
For sizes 36/38 and 44/46, knit stitch, purl 1, * knit 1, purl 1; repeat from * last stitch, chrome stitch.
For sizes 40/42, knit stitch, k1, * purl 1, k1; repeat from * to last stitch, chrome stitch.
Work in ribbing as set at 5cm, evenly increase 8 stitches on last purl row = 105 (111, 117) stitches.
Note: The last purl row of the rib is shown below in Chart 1.
Switch to 4.5 mm knitting needles.
Next row (RS): Work Row 1 of Chart 1, starting with crocheted sts, work in Waffle pattern for next 21 (24, 27) sts [see chart 3], work in Diamond pattern for next 21 sts, work in Patent Rib for next 19 pet [see pattern 2], knit the next 21 sts with the Diamond pattern, knit the next 21 (24, 27) sts with the Waffle pattern [see. Scheme 3], chrome pet.
Knit as set to a height of 19 (20, 21) cm from the cast-on row. Finish by knitting a row on the WS.
Formation of the side line and sleeves.
Inc 1 stitch at the beginning and end of the next knit row, then 5 times on each knit row.
Cast on 2 sts at beg of next 14 rows, 3 sts at beg of next 10 rows, 4 sts at beg of next 6 rows, 5 sts at beg of next 2 rows, 7 sts at beg of next 2 rows, 16 sts at beg of next 2 rows = 255 (261, 267) pet. Knit the added loops with the “Waffle” pattern. Finish knitting at a height of 56 (57, 58) cm from the cast-on row, knitting a purl row.
Forming the neckline
Cast off center 49 sts on next RS row.
On the next purl row, cast on 49 stitches.
At a back height of 51 (52, 53) cm from the shoulder, rib knit as on the front 5 cm, evenly decreasing 8 stitches along the first row = 105 (111, 117) stitches. Close the loops according to the elastic pattern.
Pin the pieces to size and block.
Neckline
Using 4mm circular needles, pick up and knit facial loops 94 stitches along neckline, bind off round.
Knit with an elastic band, working in the center of the front and back patent gum, 18 circular rows. Close the loops according to the elastic pattern. Fold the placket in half along the wrong row and sew on the wrong side.
Using 3.5 mm needles, pick up and knit 70 stitches along the edge of the sleeve and rib 7 rows. Close the loops according to the elastic pattern. Repeat on the other sleeve. Sew side seams and sleeve seams.
The “bat” sweater appeared quite a long time ago (during the years of the long world war). The muse for the item was the Japanese kimono, and that is the only reason why the first models had very impressive “bat wings” (sleeves).
Now the sweater is not so voluminous, it has become much more feminine and comfortable. And if the first products were made exclusively of silk, then modern models can be made of knitwear. Knitted pattern“bat” will be beautiful and very warm.
You can wear a “bat” with tapered trousers, a miniskirt, or a pencil skirt. Complement the sweater with your favorite jeans and heels.
For model women's sweater“Bat” you should not take too heavy threads and thick yarn. This will not create an airy product, and it will be uncomfortable with heavy sleeves.
As for wool, you can safely add it in any proportion, depending on the need for warmth. The knitting needles are matched to the yarn accordingly. The number will always depend on the thickness of the yarn. The knitting needle model for such a sweater is regular knitting needles, but stocking knitting needles can be useful for the collar.
Before knitting any product, you must try to create a sample. Each sample must have a design similar to the product. This will make it easier to count the stitches. Attach a ruler to the sample and count how many loops are contained in 10 cm. Then convert the loops to the desired size.
For beginners, a set of loops on knitting needles:
You can take the simplest patterns:
Knitting "English elastic"
Usually a traditional set of loops is used, but if you want to make the elastic more elastic, you can resort to some others.
Some needlewomen value the history of this item so much that they like to create it from threads with a silk composition. These are very interesting models. It’s very pleasant to wear them even in hot weather, because real silk gives off a slight coolness. The fabulous shine of such fibers also beckons. Therefore, it is worth thinking about what exactly to create your models from.
Step-by-step instructions for knitting a bat sweater
The bat model has approximately the same pattern for creating a sweater. It has a fitted elastic band and wide sleeves. Differences may be in sizes, fabric patterns and collars.
Let's sort it out classic model by stages of creation.
Pattern 1 “bat”
Other examples of patterns:
Knitting the back
The back on the pattern is a rectangular piece and this is how it actually looks. It's fitted with elastic and the rest of it just hangs off the shoulders. They start knitting the back from an elastic band. Usually the elastic band is high, from 10 cm. This is necessary so that the sweater fits well and does not ride up.
The neckline on the back can be very small, this pattern simply does not have it. The elastic is picked up from the middle loops, after sewing the shoulder seams.
Before
The front shelf is simply a twin of the back. The elastic band is the same in length and thickness, the rectangular part itself is also the same in height. The only difference is that there is always a neckline at the front shelf and it will be deeper than the neckline on the back.
The loops for the collar are also cast on after the shoulder seams are completed.
Sleeves
The shape of the sleeve resembles a trapezoid with a right angle. Closer to the elastic band, the sleeve is narrowed. They begin to knit it from the elastic band and then increase in each row to obtain such a wide sleeve in the area of the humerus.
Assembly of finished parts
When each element of the bat is ready, you can begin to carefully stitch it together. The principle of connecting such a blouse is also no different from connecting other blouses:
- perform shoulder seams;
- sew on sleeves;
- sew side seams at the sleeves;
- make a side seam between the front and back.
The collar of the product can be knitted on stocking needles or crocheted.
As a result, you can get such a lovely blouse.
Instructions
Start knitting from the left sleeve. To do this, tie an elastic band, about ten to fifteen centimeters. Then knit the required number of rows of the sleeve using satin stitch or another pattern, gradually adding several loops on each side.
Reach the middle of the sweater and finish knitting symmetrically, with decreases becoming increases and vice versa. Knit the remaining rows. After this, you need to reduce the required number of loops, and tie ten or fifteen centimeters of elastic on the remaining loops, then close all the loops.
Cast on the required number of loops along the bottom edge of the front and back and knit with an elastic band about sixteen centimeters. Then close all the loops.
Connect the parts of the product, while doing the side seams and sleeve seams. Work the neckline by purling one row and cast off all the stitches. It's not that difficult to knit a batwing sleeve sweater. Lay out your product and gently iron it through a damp cloth. Now you can knit a lot of different shapes and colors of clothes with an original and unusual sleeve.
Sources:
- knitting bat sleeves
The “Bat” cut sweater is relevant in any season and for any body type. U overweight women such a thing will hide all the flaws of the figure and emphasize the advantages. For the thin ones, this is a real treasure. It will fit perfectly on you, remove too thin areas of your arms and highlight your waist beautifully!
You will need
- - yarn;
- - knitting needles;
- - pattern.
Instructions
With "Bat" it is quite simple. But first you need to choose yarn. If you are planning a sweater, choose yarn with the addition of wool, angora or alpaca. But remember, it shouldn't be too thick. Select yarn no thicker than 120 m/50 g. Cotton, bamboo or silk are perfect options. Combinations of the above compositions (wool-bamboo, cotton-alpaca, etc.) are suitable for autumn.
The “Bat” sweater can be knitted in two ways. The first is to start knitting from the sleeve, and then add loops for the back or front. Or the second way is to knit from the back or front, and then pick up stitches for the sleeves.
Before you start knitting, you need to make a pattern. For the pattern, waist and chest measurements are taken; product length; neck depth and width; length and height of sleeves. When knitting this sweater special attention worth paying attention to the sleeves. It is necessary to tie them so that they do not pull, but sit comfortably on the shoulder.
To knit using the first method, cast on the stitches required for your measurements. Tie 10 cm with an elastic band so that the edge of the product does not curl. The elastic band will beautifully complement the looser top of the sweater. Next, start knitting with the main pattern. It can be “rice”, “tangle”, pearl knitting, etc. After 25 cm from the start of knitting, start adding 1 loop in every 4th row. At a height of 40 cm, cast on another 60 loops on each side of your fabric and knit on all loops up to 50 cm. Make a neckline by dividing the knitting in half and closing 20 middle loops, and continue knitting each side separately, closing the neckline on each side 7 times 1 loop each. At a height of 60 cm, close all loops. Ready before! Now knit the back in exactly the same way, but start making the neckline at a height of 55 cm. Please note that on the back you need to close 3 loops for the neck.
The second method is more labor intensive because you will have to make more additions. Cast on the knitting needles the loops needed to knit the sleeves. Tie 10 cm with an elastic band. On the left side, start adding 1 loop in every 2nd row to a height of 20 cm. Then add 2 more loops 30 times. When the sleeve height reaches 40 cm, knit straight on all stitches. After 15 cm, make a neckline, closing 5 loops on the right, then 2 times 3 loops and knit another 15 cm. To make the neckline, make the necessary additions: 2 times 3 loops, then 5 at once. Now start knitting the second sleeve in a mirror image of the first, i.e. e. on the right side, decrease 30 times by 2 loops, and then 1 loop in every 2nd row. Knit in front of the mirror.
Please note
To make it easier for you to knit in one piece, take circular knitting needles with a fishing line of at least 80 cm.
When sewing the parts together, it is important not to pull the seams together, since then you will not get the beautifully flowing folds of the sleeves that distinguish the “Bat” sweater.
Sources:
- knitted sweater bat
Many people know how to knit, because it’s so convenient to update your wardrobe with minimal financial losses. Many who have dealt with knitting sweaters have had the question of how to knit a bat sweater?
Instructions
Before you start knitting, know that a “bat” is a sweater whose sleeve is not set-in, but one-piece. In the knitting technique of such a sweater, you need to add loops along the back and front as you knit. To explain more clearly, if on a regular one you need to open the side seams and sleeve seams, and leave the shoulder seams sewn, you will get something like a cross with
Style for bat sweatshirts- one of the most advantageous for any figure. Interesting decor Large rhinestones attract attention.
Sizes: 36/38 (40/42-44/46)
Description of knitting sweaters for size 40/42 they are in parentheses in front, for size 44/46 after the dash. If only one number is given, it applies to all three sizes.
You will need: 600 (650-700) g pink (col. 36) Lana Grossa CASHSILK yarn (40% polyamide, 30% bamboo, 15% cashmere, 15% silk, 75 m/50 g); straight knitting needles No. 6.5 and No. 7.5; beige rhinestones of different sizes.
Knotted edge: Slip 1st stitch of each row as knit. Knit the last stitch of each row. All details are knitted with a knotted edge.
Rib: alternate knit 1, purl 1.
Facial surface: faces. r. - persons p., out. r.-iz. p.
Dedicated decreases: at the beginning of the row after the 6th stitch, knit 2 stitches together with a broach (= slip 1 stitch as knit, knit 1 and pull it through the removed loop). At the end of the row, before the last 6 stitches, knit 2 stitches together.
Selected additions: at the beginning of the row after the 6th stitch, at the end of the row before the last 6 stitches, cast on 1 person. cross. from a cross thread.
Knitting density. Persons satin stitch, knitting needles No. 7.5: 14 sts and 23 r. = 10 x 10 cm; elastic band, knitting needles No. 6.5: 15 sts and 23 r. = 10x10 cm.
Attention! The pullover consists of 2 parts knitted crosswise. Arrow on pattern = knitting direction.
Description of knitting a sweater with knitting needles:
Front with 1/2 sleeves: start with the right sleeve. To do this, cast on 20 sts on knitting needles No. 6.5 and knit with an elastic band, starting with 1 purl. r. and after chrome. from 1 person., at the end of the row before the edge. finish 1 purl. On the right side, add sleeves for bevel in the 6th row. from the start of work 1 p., then in every 6th p. 5 x 1 p. and in every 4th p. 18 x 1 p., performing the highlighted additions = 44 p. After 53 cm = 121 r. from the start of work the sleeve is finished. Make a mark and continue knitting as follows: on the right side, knit on the first 6 sts. stitch and on the remaining 38 sts continue to knit with an elastic band, then in every 2nd p. knit 1 time for 6 stitches, 6 times for 4 stitches and 1 time for 2 stitches more knits. satin stitch At the same time, from the mark, cast on 13 sts for the front on the right side, then in every 2nd p. 2 x 13 p. = 83 p. Knit only knit stitches on the front stitches. satin stitch On the hinges of faces. knit satin stitch with knitting needles No. 7.5, on elastic loops with knitting needles No. 6.5. When the number of elastic loops reaches 6 sts (= shoulder strap and neckline), knit on all loops with knitting needles No. 7.5. After 8 (10-12) cm = 18 (24-28) r. from the end of the sleeve, decrease 1 p. for the neckline on the left side, then in every 2nd p. 5 x 1 p., performing highlighted decreases = 77 p.
Then knit straight. After 13 cm = 30 r. from the beginning of the neck the middle of the front has been reached.
From here, knit the piece symmetrically and instead of decreasing, make increases and vice versa.
Back with 1/2 sleeves: knit as before.
Assembly: sew the seams of the sleeves and shoulders at 61 (63-65) cm. Then sew the side seams and the bottom seams of the sleeves. Distribute the rhinestones along the front according to the photo or according to the pattern and sew on.
