Age 3-6 months.
The wool I knit from:
"Baby" blue color 6 skeins of 50g and Alise Baby Softy white 2 skeins of 50g each for sleeves and hood.
To decorate the “paws” I also used wool and blue acrylic.
Knitting pattern:
Back and front parts
Start with booties and knit as one piece.
For the foot of the left bootie, use knitting needles No. 3.5 to cast on 37 stitches and knit 1 row of knits. Mark loops No. 2 and No. 20 and knit. stitch, on both sides of the intended loops, performing 1 yarn over 3 times in each 2nd row = 49 loops. Then knit 14 rows of faces without increments. satin stitch Slip the first 23 stitches and the last 15 stitches onto a auxiliary needle and knit the remaining 11 stitches for the toe in garter stitch, knitting the last loop of the toe in each row with the first loop from the auxiliary needle 7 times. Resume all 35 stitches and work 6 rows with 1 x 1 rib.
For the trouser leg, continue knitting with needles No. 4 in garter stitch. After 17 cm, put off knitting.
Knit the right bootie in the same way, marking out loops No. 18 and No. 36 for increases. For the toe, leave the first 15 loops and the last 23 loops on the auxiliary needle. Knit the pant leg the same way.
On faces On the knitting side, combine the loops as follows: cast on 10 loops, slip 35 loops on the right leg, cast on 10 loops, slip 35 loops on the left leg and cast on 10 loops = 100 loops.
Continue knitting in garter stitch. After 20 cm from the beginning of the edge, divide the knitting as follows: 27 loops for the right front, 46 loops for the back and 27 loops for the left front.
Continue knitting 27 stitches on the right front, decreasing 1 stitch in every 2nd row for the armhole 14 times.
At the same time, to cut the neckline, 7 cm from the beginning of the armhole, first close 9 loops, then in every 2nd row 1 time 2 loops and 2 times 1 loop.
Knit the left front of the overalls symmetrically. Resume knitting 46 back loops, decreasing on both sides for the armholes in each 2nd row 14 times, 1 loop. Cast off the remaining 18 stitches and finish knitting at a distance of 47 cm from the booties.
This is what I have now. This knitted booties with trouser legs and moved on to continuous knitting of the front and back.
On knitting needles No. 3.5, cast on 25 loops and knit 8 rows with 1 x 1 rib. Continue knitting with knitting needles No. 4 in garter stitch, evenly adding 8 loops in the 1st row = 33 loops. To roll up the sleeves at a height of 16 cm, decrease 1 loop on both sides in each row 14 times and bind off the remaining 5 loops at a total height of about 26 cm.
Gathering + hood
Sew seams and sew into sleeve armholes. Along the edge of the neckline for the hood, using knitting needles No. 3.5, pick up stitches, leaving 8 loops of each front free and knit 6 rows with 1 x 1 rib. Continue knitting with knitting needles No. 4 in garter stitch. After 21 cm from the elastic, close all the loops. Sew the hood seam. Make 4 holes on the fastener bar of the left shelf for buttons (overcast 1 loop): the first - about 3 cm from the beginning of the edge and the last - about 1 cm from the top edge, distribute the rest evenly. Sew buttons. Make a pompom and sew it to the hood.
Knitting density: 10 x 10 cm = 17 loops x 29 rows.
Since I will be making it with a zipper, I don’t need to make holes, I’ll just sew on a lock. As for the pompom, I still think, most likely it will be without it. 
Since the question about knitting booties has arisen more than once, I’ll describe how I knitted booties, although without photos:
For the foot of the left bootie, use knitting needles No. 3.5 to cast on 37 stitches and knit 1 row of knits. Mark loops No. 2 and No. 20 and knit. stitch, on the intended loops, performing in each 2nd row 3 times 1 increase = 43 loops. Then knit 14 rows of faces without increments. satin stitch My increase is as follows: from the marked loop I pulled out one new loop behind the back wall, and another one behind the front. Slip the first 20 stitches and the last 12 stitches onto the auxiliary needle and knit the remaining 11 loops for the toe in garter stitch, knitting the last loop of the toe in each row with the first loop from the auxiliary needle 7 times. That is, we divide 43 loops into three knitting needles: 20 + 11 + 12. We knit on the middle one, where there are 11 loops in garter stitch, and, having reached the end of the row, we knit the last loop of the row together with the loop on the adjacent knitting needle. And so 4 times or 8 decreases (on the left and right sides of the middle knitting needle). We should only have 35 loops left. From this point we knit as written in the pattern.
Note about shelves:
My zipper will not be open, but will be covered on top by a shelf strip. The result can already be seen below. And if someone wants a regular open zipper (i.e., one that is sewn to the strips of the shelves butt to joint), then the strips need to be knitted less: at the stage of connecting the legs and moving to the shelves with the back, we cast on fewer loops for the strips on the sides. I think it’s necessary instead of 10 pet. dial 5. Then you will get a joint into a joint without overlap.
Initially, it was planned that the overalls would be made with threads of the same color - blue, but there were not enough threads, so I had to buy another yarn. So you will get a combined jumpsuit (what a funny play on words): the sleeves and hood will be made of a more delicate white Alise Baby Softy bun. But I also think it will be good. You will get the feeling that a white blouse is peeking out of the blue overalls.
After 20 cm I separated 27 stitches. right shelf, and put the rest on an auxiliary knitting needle. I'm starting to knit the right front.
Finished the right shelf. I knit the left one in the same way.
Finished the shelves and back. I hid all the threads. I decided to connect the seams on the base of the overalls first, since I don’t need to do anything else with this part. Then I'll start working on the sleeves.
There wasn't enough crumbs for the back. I had to start adding Softy from Alize. But in the end it turns out beautifully.
On the back I knitted it in white double thread, since the threads differ in thickness.
Now I started knitting sleeves. I knitted a test piece from a single Softy thread. It turns out thinner than from Krokha. And the knitting density is 10 cm - 19 loops. I'll try to knit one sleeve now with a single thread and see if it makes a big difference. To do this, based on calculations, I cast on not 33 loops, but 37. I decided to knit without an elastic band, with fold-over mittens. Below we discussed the best way to make mittens. I haven't found any ready-made diagrams yet. So far I have settled on the option of knitting it separately and sewing it to the sleeve.
I knit a sleeve in stockinette stitch (knit 1 row, purl 1 row, etc.), as I looked at it - I like it better. And the scarf turns out to be a little ribbed.
Here for comparison:
I ended up with this sleeve:
I decided to knit in one thread. I won't bandage it. It turned out very tender and warm. At two it will be rougher.
More details:
I knitted the mittens, which consist of the sleeve itself and the mitten.
I sewed the mitten to the sleeve on one side, decorated it, and will also make a button with a loop so that the mitten can be fastened on the unsewn side (otherwise it will constantly pull away from the sleeve):
I also decorated the feet: 
And thus I combined the two colors I used.
The next step is the zipper:
First we sew right half zippers to the right bar, but not edge to edge, but indented: 
Then we sew the left half of the zipper to the left placket, also indented:
Knit a baby jumpsuitWe offer 3-6 months in our master class, in which the baby will be comfortable on a walk or on cool days. The overalls are knitted from soft fluffy yarn Alize Baby Soft (100% micropolyester), the knitted fabric is very soft and gentle, like foam.
To knit a jumpsuit you will need 4 skeins of yarn, 50 grams each, containing 115 meters of thread; circular knitting needles No. 3.5.
This fluffy yarn makes the knit almost invisible, like a sweatshirt, so knitting complex patterns is useless. To knit the overalls, only garter stitch is used, in which only knit stitches are knitted in the front and back rows; facial loops, on the wrong side - purl loops. The cuffs on the pants and sleeves are knitted with 1x1 rib, 1 knit stitch and 1 purl stitch according to the pattern.
The jumpsuit is knitted from the bottom up. First, the trouser legs are knitted separately.
For trouser leg cast on 38 stitches individually, tie 4 cm with 1x1 elastic. Then continue with garter stitch, to widen the leg in the 1st and then in every 5th row, add 1 stitch after the first edge stitch. Note the places of additions to count the rows.
After 16 cm from the elastic for the crotch on both sides, bind off 4 loops, in the next row 2 loops and 1 loop each. Set aside the remaining leg loops.
Knit the second leg the same way as the first. Transfer the stitches from both legs to circular needles and continue knitting in circular rows using stockinette stitch. To increase the back part, through two circular rows on the back part, knit back and forth shortened rows on the back loops. Work 6 short rows.
After 4-5 cm from the garter stitch, divide the stitches in the center of the front part and continue to knit in stockinette stitch in straight and reverse rows.
Knit the body of the overalls to a length of 20-23 cm. Then divide the loops into three parts - the right, left front and back. Knit each part separately, making raglan decreases.
Knit the back, making decreases at the beginning of each row, on the front side knitting the first two loops together with the front one, on the wrong side - the first two loops together with the wrong side. When the number of loops is halved and the armhole height becomes 11-12 cm, set aside the remaining loops.
Knit shelves, making decreases across the row from the sleeve side, knitting the first two loops together. Having knitted the shelves to the height of the back loops of the shelves, also set aside.
Now tie the sleeves. Cast on 34 loops, for the cuff, tie 4 cm with a 1x1 elastic band. Continue knitting the sleeve in garter stitch, making an increase at the beginning in the 1st row, continue to add a loop at the beginning of the row after the edge in every 5th row, and 10 cm from the beginning in every 7th row. Having knitted the sleeve to a height of 21 cm, start making decreases for the raglan. To do this, at the beginning of each row, knit 2 stitches together. When 10 loops remain and the raglan lines are the same length as on the shelves and back, set aside the remaining loops.
Knit the second sleeve in the same way.
On circular knitting needles, re-slip the loops of the fronts, sleeves and back, placing the loops of one and the second sleeve between the loops of the fronts and back. Next, for the collar strap, tie 2 cm with a 1x1 elastic band and close all the loops.
Jumpsuit knitted knit for children younger age, for kids, as a rule. Thanks to the knitted overalls, the mother can be sure that the child will not get caught anywhere, nothing will fall off, or get dirty anywhere. In addition, a knitted jumpsuit makes it easier and faster to dress a child in order to get ready for a walk. There are different variations and names of overalls. Some people call knitted overalls bodysuit, sandpiper. Overalls for children are knitted not only with knitting needles, but also with crochet. A combination of techniques is common.
A knitted jumpsuit looks good when combined with other products - booties, socks, hats.. Send a photo of the finished jumpsuit, a knitting pattern and a description.
Animal overalls
Another popular way to use onesies is to knit onesies for dogs (mostly, although there is nothing stopping you from knitting onesies for cats). Dog onesies will not only help your friend feel comfortable outside (especially if the animal is strictly domestic), but these products are simply fun. Remember that picture with the dog in a shark jumpsuit :) This opens up a whole lot of room for creative hands.
I wanted to make a gift for my friend's baby. I searched the Internet and couldn’t find a description. I had to write it myself. Here's what happened as a result:
I share my experiences.
Everything is knitted in the round, without seams.
The baby is about 6-7 months old.
Alize Softy about 3.5 skeins. I used Maxim threads for the elastic. Acrylic 50g 135 m. It took about a third of the skein (the rest).
Pants legs:
On 2.5 knitting needles, cast on 49 stitches using the Italian cast-on (48 for the elastic + 1 for joining in a circle) using a smooth thread. Unfold the knitting and remove the first loop. knit knit, remove purl, thread before work. Do not knit the last loop; check that the knitting is not twisted. Close in a circle, knitting the last and first together according to the pattern. Place a marker for the beginning of the row (virtual inner seam of the leg). The next row is to purl, remove knits, thread at work. In the next row, switch to 1x1 rib. Knit with an elastic band for 20 rows (about 6 cm)
In the 21st row, switch to Softie. We knit all the loops with facial stitches. Increase after every 4th stitch. Total 60 loops. Switch to knitting needles 3. Knit in stockinette stitch. In every 6th row we add one loop at the beginning and at the end of the row (increase 2 loops in a row) - 5 times. A total of 70 loops (about 14 cm width of the trouser leg). I made the extensions simply from a broach, Softie hides the holes well. Next, stitch stitch to a height of 16 cm from the elastic band.
To form a gusset, we increase one stitch at the beginning and at the end of the row (i.e., on both sides of the beginning of the row marker). In every second row 4 times = 8 increase stitches. After the last increase, knit a row without increases. Knit 4 stitches after the marker. The total height of the trouser leg is 18cm + 6cm elastic.
Let's put this trouser leg aside. We leave the thread about 20cm long; we will need it for sewing the gusset. We knit the second leg in the same way, but on it in the last row we do not knit 5 loops to the marker. Do not break the thread.
On each trouser leg, place 8 loops on the holder (4 before the marker and 4 after). We combine both pant legs into a circle. The trouser leg with the working thread is on the left. Folding the pant legs internal seams to each other. The loops placed on the holder should be next to each other. At the junction we swap the leg loops. On the left trouser leg we have 1 unknitted loop left. First, we knit 1 loop from the right trouser leg, put a marker for the beginning of the row, then we knit the remaining loop from the left trouser leg, then we knit all the loops of the right trouser leg to the ones set aside. When switching to another trouser leg, we also swap the outer loops. 140 loops on the knitting needles.
We knit 2 circular rows in stockinette stitch. At the end of the second row, do not knit the last 5 stitches before the marker. We get 10 loops. For example, as described here: http://knitting-pro.ru/knitting-work/basic-kind-stitch/279-add-stitchs-begin-end. This will be the left bar. There are 150 loops on the needles. Unfold the knitting. Next we knit in turning rows. At the beginning of the row there are 10 stitches: 1 edge stitch, 8 garter stitches, 1 purl stitch. I place a marker on the edge of the bar. After the bar - front stitch up to the last 10 stitches - the second bar (symmetrically: 1 loop purl stitch, 8 - garter stitch, 1 - edge stitch) remove the marker for the beginning of the row. It's no longer needed. We knit 4 turning rows. In the last purl row we place side markers: placket loops, 30 loops - marker (left front), 70 loops marker (back), 30 loops (right front), placket loops.
In the next row we knit a shortened row: we knit the front and back loops, unfold the knitting, yarn over, knit the back loops, unfold the knitting, yarn over, knit the row to the end (we knit the yarn over together with the next loop). We make such shortened rows every 4 rows 4 times. In total, we add 8 rows on the butt for a better fit.
Then straight to the armholes to a height of 23 cm from the joint of the trouser legs. We finish by knitting the back row. We put off knitting. We don’t break the thread
Sleeves.
We knit from a new ball.
On 2.5 knitting needles, using a smooth thread, cast on 41 loops using the Italian cast-on (40 for the elastic and 1 for joining in a circle). We connect in a circle as described on the trouser leg. Place a marker for the beginning of the row. We knit 20 rows with an elastic band. In the 21st row we switch to Softie, knit all the loops, add loops after every 4th. Total 50 loops. Switch to needle number 3. Next, work in stockinette stitch. In every 6th row, on 2 sides of the marker, add one loop (2 loops in a row) 5 times. 60 loops in total (about 12 cm sleeve width). Continue straight until the sleeve is 17 cm from the elastic band. We knit 3 loops after the marker. Remove 3 loops before the marker and 3 after the marker (6 undercut loops). Cut the thread leaving about 20 cm at the end. We knit the second sleeve in the same way.
We assemble everything on one circular knitting needle: we knit the loops of the right front without knitting 3 loops to the side marker. We remove the next 6 loops onto the holder (undercut loops). We put a marker. We knit the sleeve, except for the undercut loops on the holder. We put a marker. We knit the back, stopping 3 stitches before the side marker. We remove the next 6 loops onto the holder. put a marker. Attach the second sleeve. We put a marker. We knit the loops of the shelf. We placed 4 markers at the junction of the carcass and the sleeves - raglan lines. There are 246 stitches on the needles.
I left 2 loops on the raglan lines - one loop on each side of the marker. Next, we knit in stockinette stitch, cutting one stitch in each front row on each side of the marker - a total of 8 stitches in the row. Before the marker I knitted the 2nd and 3rd loop together with a tilt to the left, after the marker - to the right. The loops of the raglan line were knitted with the front one. We make decreases until there are 118 stitches left on the knitting needles. There are 16 decreases in total.
Then we form a sprout in short rows. I did 3 intervals on the fronts and 3 intervals on the sleeves. I placed the markers on the shelves first. I knitted starting with long rows, moving to shorter ones. Then she placed markers on the sleeves and walked towards them. Don’t forget to do raglan decreases in the front rows. When all the markers for the shortened rows were finished, I knitted the front row to the end. And the entire purl row. In total I got 12 rows of sprouts. I have 78 stitches left on my needles.
Next, we attach a smooth thread and knit with a 1 by 1 elastic band. Knitting needles 2.5. In order for the elastic to end symmetrically, there must be an odd number of loops. To do this, in the first row of elastic, I knitted 2 loops together in the middle of the back. I knitted the elastic to a height of 2 cm. At the end of 2 rows of hollow elastic and close with a needle.
The undercut and gusset loops were sewn loop into loop using the remaining ends of the thread.
Hem the bottom cut of the left plank from the inside to the right one.
I knitted strips for installing buttons. If you are going to make buttons, then you need to provide holes on the right bar.
Photo on the owner.
