Every mother knows that being in the sun with your head uncovered is not at all good for your health. Therefore, from an early age, all children are put on caps and panama hats, allowing them to sunbathe without fear. As a summer headdress, you can use panama hats, baseball caps or just scarves. Or you can knit your own openwork hats made of natural cotton, which will allow your skin to breathe, but at the same time protect you from sunstroke. So, today we will learn how to knit openwork hats using a crochet hook.
Learn how to crochet warm openwork hats with your own hands
To make a children's knitted hat you will need:- cotton threads (white, green and pink)
- crochet hook No. 2
Below is a pattern for knitting children's openwork hats.
1) First, we cast on a chain of six air loops.
2) We start the first level with three lifting loops. We knit them into a circle of 16 double crochets.
3) Second level: first of all, we cast on three lifting loops, and after them - one air loop. After this, in all columns of the first level we knit a block of one double crochet and one chain stitch. We continue knitting like this until the level ends.
4) Third level: in all chain loops of the second level we knit two double crochets, alternating them with chain loops.
5) Fourth level: knitted in the same way as the third, but we make three double crochets with one base.
6) Fifth level: cast on three chain stitches, then knit the following block “two double crochets, one chain loop, three double crochets” into a combined chain stitch of the fourth level. After this, we perform “one chain loop, three double crochets in each chain loop of the fourth row,” and through three chain loops of the fourth level we knit this block “three double crochets, one chain loop, three double crochets.”
7) Sixth level: knitted in the same way as the fifth, but at the same time we knit the blocks of the fifth level not into the fourth, but into the fifth air loop of the fifth level.
8) Seventh level: we start with lifting loops, then two double crochets in the chain loop of the previous row, then repeat the block “one chain loop, three double crochets in the chain loop of the previous row.”
9) Eighth level: knitted in the same way as the seventh.
10) The brim of the Panama hat is knitted according to the pattern, and you first need to knit the arches of six air loops through four loops.
11) The openwork children's Panama hat is ready! This headdress is suitable not only for summer, but also for spring if the weather is warm.
Panama hats of this type will look great on children under one year of age. For newborns, it is especially important to use natural materials and it is better not to sew on additional beads or beads.
And also lace knitted panama hats can be knitted not only for babies, but also for older women.
To make a women's openwork hat you will need:- cherry mercerized cotton yarn (110 m/50g)
- crochet hook No. 4 (you can also take hook No. 3, but with hook No. 4 the finished product will be more elegant and airy)
The finished Panama hat is suitable for a head circumference of 55-57 cm.
Below are step-by-step instructions and a description of how to knit each row.
1) We start knitting by making the bottom of the panama hat. We cast on six chain stitches and close the circle. Next, we knit with double crochets, the first level - we knit eight double crochets into a ring.
2) Second level: we knit 16 double crochets into a ring.
3) Third level: in every second loop of the previous level we knit two double crochets.
4) Fourth level: through two loops of the third level we knit two double crochets. At the fifth level - every fourth, etc. We knit this way until a circle of the required size is ready (on average, eight in a row for a bottom diameter of 17 cm).
1) Next we knit with openwork stitch according to the pattern (patterns are presented below), we do not make any additions. If the threads are thin, columns with two crochets are knitted, but if the threads hold their shape well, then you can get by with columns with one crochet.
2) We knit the first level of the pattern: the main difficulty of this level lies in the crossed columns.
3) Second level of the pattern: we cast on three air loops of lifting, after that we knit a double crochet into the third loop of the row, then a double crochet into the second loop of the level - we have a cross column. We repeat the air loop again and knit with such blocks until the end of the level. This level consists of thick columns, between which there are three air loops.
4) The third level of the pattern is knitted similarly to the first.
5) The fourth level of the pattern completes the rapport. The entire level is knitted with double crochets into each stitch of the previous level. Make sure that not a single loop is left missing. We knit enough of these repeats to make the hat the required size. On average, there should be two rapports and one more level. Thus, the entire depth of the cap was ten levels.
6) We knit the last three levels in single crochet columns, forming the edge of the cap.
7) A charming women's Panama hat is ready for the summer.
Video on the topic of the article
Below are interesting video tutorials that explain in detail how to knit cute openwork panama hats for girls of any age.
Winter is coming soon. It's time to crochet a new warm hat. You shouldn't walk in cold weather without a hat. And at the same time I want to look beautiful. Therefore, we present to you a selection of knitting patterns with descriptions of crocheted winter hats with patterns and descriptions so that you have a choice to suit every taste.
Spectacular crochet winter hat
Warm cozy set for winter
The first option is a bright knitted hat for the winter and... The set is knitted from thick section-dyed yarn, so you can knit it in a few days, even if you are a beginner knitter. The principle of knitting embossed columns is shown in the photo step by step, the pattern is completely simple.
You will need:
- yarn with parameters 100met/100g - 200 grams;
- hook No. 8;
— faux fur pompom with a diameter of 15 cm.
Scarf pattern: (multiples of 4)
1st row: 3 air loops (VP), then s/n columns;
2p.: 2 VP, * 2 embossed columns s/n (RSSN) behind the front wall (the hook must be inserted in front around the column s/n of the bottom row), 2 half-columns * - repeat from *, finish 2 RSSN behind the front wall, 1 half-column.
3p.: 2 VP, * 2 RSSN behind the back wall (insert the hook from behind into the bottom row), 2 half-columns * - repeat from *,
complete 3 half columns.
4p.: 2 VP, * 2 half-columns, 2 RSSN for the front. wall *, 3 half-columns.
5p.: 2 VP, * 2 half-columns, 2 RSSN behind the back wall * 3 half-columns.
Repeat the pattern the first time from rows 1 to 5, then from rows 2 to 5.
Elastic band (for hat): (circular rows, multiples of 4)
1st row: 3 VP, then column s/n, finish 1 connecting column in the starting point;
2p.: 2 VP together with the 1st p/st, * 2 RSSN for the front wall, 2 p/st *, finish with 2 RSCH for the front wall, 1 RSCH, 1 connecting column. to the second initial VP.
Density: main pattern 7 p. = 10 cm.
Description of knitting hats:
- Cast on 36 VP, close it in a circle with a connecting column.
- Continue working with a 14 cm ribbed pattern.
- Begin rounding the cap to form the crown. In the first r. knit all the half-stitches together (=27 stitches). In the second r. knit raised treble stitches together (=18 stitches). Next, knit a row of treble crochets, knitting them 2 at a time (=9p.). One more r. without decreases and pull the remaining ones together with a working thread. Strengthen it firmly.
- Make 1 row along the edge of the hat. in a crayfish step (place dc/n from left to right).
- Sew on the pompom.
Loop scarf: Start with a chain of 24 ch and 3 ch for the rise. Continue with the pattern for a 170 cm scarf. Sew along the short side.
Source: Little Diana magazine.
Hat made of bulky yarn for the winter
Many girls and women love small, neat hats. But in the winter cold you need to dress warmly. An excellent solution for this case is knitting from bulky wool yarn. The headdress will look stylish with fur coats and down jackets.
Size: 56-57 cm
Required:
- two types of yarn 1 - from Lana Grossa: Famoso dark gray (45% wool, 55% polyacrylic, 38m/50g) - 100 grams;
— 2 — Uno gray-black color (52% wool, 48% polyacrylic, 65met/50g) — 50 grams;
- hook No. 12.
Density: 5 p. = 10 cm
Crochet hat description:
- Start at the top of the cap with two chain stitches using thread #1. In the 1st circular row, knit 6 columns of b/n into the second chain stitch.
- In the 2nd r. continue with the same stitch and double the stitches (=12 stitches). At 3 p.m. double after 1 p. (=18 p.).
In the 4th - after 2 p. (= 24 p.). - From 5 to 14 p.m. knit without additions. Finish with a row of connecting posts.
- Use yarn number 2 to make a pompom.
Source: Filati magazine
White winter hat with lapel and openwork scarf
White is always a popular color for winter
It’s good when the hat is warm, but if there is also a flap, then in winter it will be even warmer. And it will look great over a jacket, fur coat, or down jacket. Let's look at a warm winter crochet knitting pattern. But only those who know how to crochet and knit can knit it.
Size 56 cm
Required:
— 450 g of yarn with parameters 190 met/100 g;
- knitting needles No. 3.5;
- hook No. 3.5.
Density: 23 p. = 10 cm
Scheme for making a women's hat:
- Cast on 96 sts on the knitting needles and knit 23 cm in stockinette stitch in the round (all stitches are knit).
- For the crown of the hat, knit every second r. All loops are two together. Pull and fasten the remaining 24 stitches.
- At the bottom of the cap for an openwork lapel, crochet 10-12 cm of the pattern according to the pattern. Fold the lapel twice, laying out a beautiful openwork pattern.
- For a scarf, dial 51 air stitches. and knit 180 cm with a pattern according to the pattern (= 12 repeats and 3 stitches for symmetry). Make 46 tassels (23 per edge) by cutting 8 30 cm long threads for each tassel.
Crochet blue hat with pompom for girl
Crochet a bright hat for winter weather and you will immediately feel warmer. The stripe effect is created by the sectional dyeing thread.
For head circumference 50-54 cm.
Required:
- yarn with characteristics 250m/100g with color change - 100 grams;
- hook No. 4.
Pattern for the hat: double crochets in a spiral without connecting stitches.
Blue color for blue winter
How to crochet a hat?
Work starts from the top of the cap.
- Cast on 10 chain stitches, join in a circle and work 10 treble crochets.
- Second row: double the number of loops, inserting the hook twice in each gap (=20 stitches).
- In the third r. increase every 1 p. (= 30 p.), in the fourth - after 2 p. (=40p.), 5 and 6 rubles. - no increase, 7 rubles. - add after 1 p. (=60p.), at 8 p. double every 6th stitch (=70 stitches).
- Then continue without increments until the height is 22 cm.
- Finish with one p. Art. b/n.
- Make a pompom from the leftover threads and sew it to the hat.
Source: Little Diana magazine
Delicate winter hat made of mohair crochet
If we talk about winter knitted fashion, then it is impossible to ignore products knitted from mohair. The yarn is soft, fluffy and warms well during the cold season. The presented version of the hat is very simple. Even a novice craftswoman who has picked up a hook for the first time can knit it. So, a step-by-step pattern for crocheting a winter knitted hat for women.
Mohair charm for winter
Head circumference: 54-56 cm, hat height without pompom - 21 cm.
You will need:
— Mochairlana yarn from Lana Grossa (42% mohair, 33% merino wool, 25% polyamide, 137 met/25g) — 50 g gray-lilac color;
- hook No. 4,5 and No. 5.
Density: 18 half. = 10 cm
How to knit a half-stitch: make 1 yarn over on the hook, pull out a loop, then with one new yarn over close all three stitches on the hook. Knit half stitches in circular rows, each circle starting with 2 chain stitches. rise.
How to add loops: from one half-column of the previous row. knit two at once.
How to decrease loops: Yarn over the hook and pull 1 stitch through two loops, then use a new yarn over to cover all stitches on the hook.
Step-by-step instructions for beginners:
- Make a chain of 4 chain stitches with hook No. 5, close them in a circle with a connecting stitch. Next, knit the hat in half-stitches.
- We make additions: 1 circle - dial 2 air.p. for lifting and increase the number of half-columns to 10.
Round 2: double each half stitch (=20 stitches);
Round 3: add every other stitch (= 30 stitches);
Round 4: double every third half-stack. (=40p.);
5th round: doubling every fourth half st. (=50p.);
6 circle: every fifth half-column (= 60 p.);
7 circle: every sixth half-column (= 70 p.);
8 round: every seventh (= 80 p.);
9th round: - " - eighth (= 90p.);
10th round: - " - ninth (= 100p.);
11th circle: - “- tenth (= 110 p.);
12th round: - » - eleventh (120p.)
Round 13: knit without increments.
At this point you have knitted the flared part of the hat. - Now you need to decrease the loops:
Round 14: Cast off all 9th and 10th stitches 12 times. together (=108p.);
15 round: 12 times all 8 and 9 sts. together (=96p.);
Round 16: similarly knit 7 and 8 stitches together. - 12 rubles;
17th round: 12 r. all 6 and 7 half-columns (=72p.);
4. Next, we will knit the stand-beads with crochet number 4.5:
Circles 18-23: single crochet 72 p. - Make a bomb with a diameter of 5 cm and sew it to the hat.
Several models of winter hats for experienced craftswomen
For those knitters who already have considerable experience in crocheting patterns, there is no point in providing step-by-step instructions, as for beginners. Enough pattern diagrams. You can do all the calculations yourself and figure out the pattern of the pattern.
Pattern for experienced craftswomen
Another crochet pattern for a women's winter hat
Star pattern for hat
Knitted hat with colored stripes 
Incredibly beautiful crochet pattern for a hat:
For lovers of exclusive hats
Stylish women's hat style for women
When talking about winter knitted hats, it is impossible to forget about caps. There are two with a beautiful pattern for your choice.
You will need:
— Patons Canadian threads (100gr/187met);
- hook No. 5;
- 2 buttons.
Density: 14 tbsp. — 10 cm
How to knit a hat:
- Dial 3 v/p and close it in a ring. Knit from 1 to 14 r according to the crochet pattern. Expansion stage.
- Next, repeat rows 13 and 14 until you reach 20.5 cm from the top.
- Let's move on to making the plank: 1p. - 1 v/p, 1 column b/n in each column, connecting. pillar. (=64p.). Repeat this row again.
- Visor:
1st row: 1 single stitch, (1 double stitch in all columns) - 46 times, turn the product;
2-10r.: repeat 1r. turning rows “back and forth”. - Unscrew the side edges of the visor as in the photo. Secure them with buttons.
Voluminous knitted model for the winter
Development of the Urbu Garn style, adapted from the Swedish by Marina Lindberg.
You will need 100g of medium thickness yarn and a No. 4 hook.
A classic beret is always in fashion
Knit a chain of 3 stitches and combine into a circle. Each new r. start with an air loop. From the ring, knit 7 columns. (STBN)
1st row: * 1 STBN, 2 columns each. in every 2nd column. previous p. *;
2p.: * 2 STBN, from one column. - two *;
3rd: like the second;
4p.: * 3 STBN, from one column. - two *;
5 and 6 rubles: like the fourth;
7p.: * 5 STBN, from one column. - two *;
8 rub.: * 6 STBN, from one column. - two *;
9p: knit in the same way, increasing the loops in every 7th loop;
10p.: add in the eighth p.;
11p.: add in the ninth paragraph;
12p.: add in the tenth p.;
13r.: increase in the eleventh paragraph;
14 rubles: increase in the fifteenth paragraph;
15-18 rubles: no additions;
19p.: 13 STBN, * pull out a stitch from the next column. (=2 sts on hook), pull sts out of next stitch. (=3 sts on hook), pull yarn through all 3 sts, 13 sc*
20r.: * 7 STBN, one on three points as in 19r. *
RUR 21-27: knit according to the pattern.
Next we knit a bar: from 70 STBN - 5 rows.
Visor: along the edge of the strip, tie 34 STBN - 2 rows. Then at the beginning of each r. skip 1 p. Such decreases must be made 8 times.
Finally, tie the entire hat with STBN around the entire circumference.
Perky hat with columns
Morning fashionable color - Bay of Biscay
A cheerful crocheted model of a winter hat in this season's trendy Bay of Biscay color will diversify your wardrobe. The color looks especially good when combined with dark chocolate.
Size: 52-54 cm
Required:
— section-dyed yarn with characteristics of 90 m per 50 g;
- hook No. 6.
Pattern for the hat: circular r. in a spiral - * 1StBN, next st. pass with air. * - repeat from *. Knit the next rows of stitches from the air stitch of the previous row.
Work progress: make a chain of 64 sts, close in a circle using a connecting stitch. and knit with a pattern for a hat. When you knit 14 cm, knit all 7 and 8 sts together (= 56 sts). In the second decreasing p. - 6 and 7 at once (= 48 p.). Decrease in the same rhythm until 8 stitches remain. Pull them together with a working thread and secure. diameter 8 cm.
Charming women's knitted hat with a bell
The knitting pattern has already been given on our website, there is no need to repeat it, follow the link under the photo.
The combination of a beautiful pattern and sectional yarn is incredibly beautiful!
Head circumference: 54 cm
Required:
— section-dyed yarn Kid Royal Missisipi (62% kid mohair, 38% polyamide, 500 met/50 g) — 100 grams;
- hook No. 1.5
— clasp for a brooch.
We knit with thread in two folds.
A chain of 6 chain stitches close it in a ring. Then we continue according to pattern 1 until the desired diameter of the hat, then we knit straight. Along the bottom edge of the hat, knit a pattern according to pattern 2. Schemes 3, 4 and 5 show how to make 3 flowers. Connect them together. Using a pin, pin onto the hat.
Two models of winter hats. Please note that the green cap is double.
Video master class on knitting hats for winter:
There are a great variety of hats - for all occasions, for any weather and age.
- Panama hats and skullcaps, caps and berets, helmets and caps, caps and hats.
- Scarf hats, scarf hats, transformable hats.
- Hats with small and long ears, with a visor, ponytail, and braids.
- Decorated with embroidery, rhinestones, ribbons, beads;
- with an emphasis on the back of the head, plain, with multi-colored ornaments, asymmetrical
- etc.
Elegant and flirty, feminine and funny, romantic and stylish hats will tell more about their owner than a service or neighborly characteristic.
First cap
The openwork hat is the third topic in the crochet teaching program. The first is knitting elements: loop, chain, stitch. The second is a small cloth: an oven mitt, a collar, a scarf. The third is a hat.
A simple hat, starting from the bottom, with a modest pattern, knitted easily and quickly, remains to live with the owner forever. Even if it turns out to be too small/wide, they won’t dissolve it or throw it away. It will serve as a small relic of the first independent creativity, and inspire the creation of new openwork masterpieces - for daughters and sons, for mothers and mothers-in-law, for girlfriends and bosses.
No to market Panama hats! Yes – to lacy hats and caps!
An openwork hat is a decoration for a woman’s head, regardless of age. It's easy to decorate yourself with a hook. Once the basics of knitting hats are mastered, fantasy and inspiration come.
Old, saggy Panama hats are becoming a thing of the past. Magic hats made from natural threads with small or large openwork brims appear, which make your head feel so good. The husband is delighted, the neighbors are jealous, and instead of the aunt, a beautiful, elegant Woman appears.
I found the hat pattern on the Internet. The pattern is very simple and easy to knit, so I knitted everything together very quickly. I wear it with pleasure. Yarn - 25% wool, 75% acrylic.
Hat size: 54-56. Knitted to order with crochet No. 2 from wool blend yarn 340m x 100g. in two threads. Consumption is about 50 g.
If you add a lining to it, you can wear it in winter. I have been knitting and wearing this pattern for several years. Friends will see and order.
Crochet hat, description of the knitting process:
The hat is knitted from the bottom in circular rows. The drawing consists of arches made of air. loops and single crochets.
1st row - In a ring of 15 air. loops we knit arches from 15 air. loops attaching into a ring st. b. n. There are 16 arches in total. We knit the 17th arch like this: 7 air. loops + double crochet stitch.
(Adding another arch of 15 air loops will result in a hat size 56-58.)
3 row-4 air. loops + st. b. n. inserting the hook into the middle of the st. b. n. previous row.
4th and 5th rows - 5 air. loops + st. b. n.
6 row-2 connection. loops, inserting a hook between the 3rd and 4th rows we knit “1 tbsp. b. n. + 5 air loops"
7-8-9th rows-6 air. loops + st. b. n. in the middle of the column of the previous row.
10 row-3 connection. loops and inserting a hook between the 7th and 8th rows we knit “stitch b. n.+ 6 air. loops"
Repeat from “and to” until the end of the row.
11-12-13th rows - According to the figure 6 air. loops + st. b. n.
14th row - The pattern is repeated from the 10th row to the 28th row.
29th row - Knit in one thread.
In arches of 6 air. knit loops 6 tbsp. b. n. + 1 tbsp. b. n. in Art. b. n. previous row.
30th row - Along the entire row of art. b. n.
31st row - Apply an elastic band 3mm wide. (See pictures) and tying the elastic we knit st. b. n. +
pico from 3 air. loops
We tighten the elastic slightly while knitting. It is so that the product holds when worn.
form.
Cap size: 56-58 cm.
You will need: 50 g each of Vista yarn and viscose silk; some dark yarn for finishing; hook number 2.
Sequence of knitting a hat
- Tie 1 circle with a diameter of 15 cm according to the pattern.
- Next, continue knitting without increasing to a height of 4-5 cm.
- Knit the fragments separately according to pattern 2, connecting them to each other and to the bottom while knitting the last row.
- Tie the edge of the cap with 3 rows of sc. In the last row of sc, knit a picot.
Are you planning to make a splash at the resort? Forget wide-brimmed hats. Better knit a pair of fashionable berets or hats. They will look good with both dresses and shorts.
You will need: VIOLET yarn (100% cotton) - 50 g purple and 10 g beige, hook No. 1.5.
Basic pattern: Crochet according to the pattern.
Openwork crochet beanie hat, description
- Use a purple thread to make a chain of 210 chain stitches. p. + 2 air. lifting point.
- Knit the 1st row with b/n stitches. 2nd row - *st. s/n, air. p.*, repeat *-*.
- 3rd row - st. b/n.
- Then step back 36 sts to tie and then knit, repeating the pattern from the 1st row. At the same time, at the end of the 4th row, leave 36 stitches unknitted for tying.
- Starting from the 6th row, knit in the round.
- In the 8th row add 1 repeat, in the 9th row - 2 repeats.
- Knit the 11th row with beige thread.
- Then knit 6 rows with purple thread, 1 row with beige thread, 6 rows with purple thread, 1 row with beige thread.
- After this, knit 6 rows again with purple thread, and in the 6th row, decrease 1 air. etc. in each rapport.
- Then knit 1 row with beige thread according to the pattern and 6 rows with purple thread, decreasing 1 stitch in each repeat.
- Knit all remaining rows in st. b/n, gradually decreasing to 6 loops. Tighten the remaining loops with thread.
Openwork crochet hat for girls
In summer, hats are worn not only by women, but also by our little children. Be sure to knit your child an openwork hat for the summer using our patterns.
Summer set for girls. Work by Marina Stoyakina
Hello everyone! And I present my new work made of 100% cotton.
The hat is knitted according to the attached pattern and tied according to the yoke principle. The decorative motif is the same “African flower”.
Openwork strapping of the cap:
- we knit an even number of arches, 5 in each.
- In the next row we knit 4Dc, 3VP, 4Dc in the first arch, then connect. loop with the second arch, in the third arch again 4СН, 3ВП, 4СН... and so on until the completion of the tying circle.
- The third row - with a contrasting thread - we knit RLS, and above 3VP we make a picot.
I will be glad if you are inspired by my work and create bright summer outfits for your wonderful girls!
Many people like my panama hats and they ask me to conduct a master class. Now the warm season is approaching, when mothers will want to knit such a hat for their little ones. This hat can also be knitted for adults. This hat is knitted with an openwork pattern that will protect you from the sun and morning coolness.
The pattern is not perforated. The brim of the cap protects the eyes from the sun and is a decoration of the cap.
Calculation of hat sizes
To accurately determine the size of the cap, we determine the dimensions of the bottom and depth of the cap, you need to know the length of the head circumference or the age of the child. We determine the head circumference with a centimeter so that it passes at the back along the most protruding point, at the front 1.5 - 2 cm above the eyebrows:
If it is not possible to take measurements, we can approximately determine the head circumference using the table: 
We calculate the diameter of the bottom of the hat as follows: divide the head circumference by pi equal to 3.14 and subtract 1.5 - 2 cm (you don’t have to subtract 1.5 - 2 cm, then the hat will be freer and you can adjust its size using the drawstring) . The diameter of the bottom is a flat circle to which we will expand.
The depth of the cap is determined by the formula:
Divide the head circumference by 3 and add one cm (to the middle of the ear). It is better to do a fitting; if it is not possible to do a fitting, we take the depth of the cap from the table.
Master class of caps and panamas for the head with a diameter of 51 cm.
Threads 100% cotton 550 m per 100g. Hook 1.25.
1. Make an amigurumi loop: 
2. Three air lifting loops at 19 s.n. , close the row s.s.
3. Three vp raises, one vp, one dc, repeat 18 times. At the end of the row s.s.
Knitting pattern for a hat
4. Three ch. lifting, in the first v.p. rise. One v.p. repeat 19 times. At the end of the row s.s. 
5. Three ch. lifting, one s.n. in s.n. previous row, two v.p., two d.c. in s.n. previous row, two v.p. repeat 18 times, at the end of the row s.s.
7. Next we knit the crown without adding to a depth of 9.5 cm. 
8. We knit two rows of sc.
9. One row d.n. in one v.p. repeat to the end of the row. 
10. Two rows of s.b.n. repeat to the end of the row.
11. Next we knit the brim of the cap. 
Knitted from 100% Begonia cotton, hook number 2. The openwork cap is knitted with a basic pattern, its volume is adjustable with a ribbon. Beads - tied wooden and mother-of-pearl beads. Set size - for 3 years.
Hat - Bunny. We start knitting a hat from the top of the head, cast on several loops - a chain, connect it into a circle and then knit it according to the attached pattern.
We tie the resulting circle with 12 double crochets.
- 2nd row - increases by 2 columns, in each lower column = 24
- 3rd row increase through one column = 36 columns.
- 4th row increase in every 3rd column = 48 columns.
- 5th row increase in every 4th,
- 6th in every 5m, etc., until our circle is evenly increased to the bottom diameter you need (table attached)
We knit the bottom with a relief elastic band. (diagram attached)
It is also called convex and concave.
We decorate with the BUNNY applique :) AND SEW ON THE EARS (two circles, double stitch).
This summer hat is knitted from Alize Forever yarn. Work by Elvira Tkach. Yarn composition: 100% microfiber acrylic, 50 g, 300 m. Head circumference 40 cm. The hat is knitted from top to bottom according to pattern 1. From the 1st to the 17th and 21st to the 22nd rows we knit with turquoise yarn. From the 18th to the 20th and from the 23rd to the 25th row - in white. After the 25th row, I repeated the “stripe” again with turquoise, white and again turquoise. Then I completed the work with the edge according to scheme 2.
Set “Bell” - a hat with a hole for a ponytail or braid and a handbag! Incredibly convenient option for long hair!
Crocheted set made of 100% cotton CHARM (pink) and COCO (green) from VITA. We cast on 36 VPs, close them in a ring and then knit according to the approximate pattern with ticks from DC (I knitted without stitches between the ticks, but whoever likes it!).
We knit a green pom-pom with a dc - in each row we double the loops and so on until the desired length. For example, you tied a hole with 36 double crochets (dc). In the second row, make an increase in each column - knit 2 Dcs, for a total of 36 * 2 = 72 Dcs. In the third row - 72 * 2 = 144 SSN. In the fourth row - 144 * 2 = 228 Dc. 4 rows will most likely be enough.
The hole for the ponytail is adjustable with a cord made from VP. The lace decorations can be anything! The handbag is an inverted cap, we use the same pattern; handle - any version of ribbon lace.
Patterns for knitting an openwork hat and handbag
The size of the knitted hat is head circumference 54 cm.
To crochet a hat you will need: 100 g of blue yarn (100% cotton), hook number 2.
The bottom of the hat is made according to pattern No. 1. Next, knit in the round with a pattern according to pattern No. 2 without increments to the desired depth of the hat.
Tie the edge of the cap with a picot.
You will need: leftover 100% cotton yarn of different colors (240 m/50g): light green, orange, turquoise, white, yellow, hook number 2, safety pins, pattern paper, needle and thread to match the yarn for sewing.
Patterns: flowers and leaves according to patterns, single crochets.
Sequence of knitting an openwork hat
- Cut out a circle with a diameter of 35 cm, pin it with safety pins to a soft base. The basis can be a thick pillow.
- Next, we knit flowers and leaves from various yarns according to the patterns. You can choose other color schemes. We hem the ends of the yarn to create an even element, and steam the finished products.
- Then we lay out the steamed flowers and leaves on the pattern face down, in any order, and attach them to the base with safety pins.
- We sew closely adjacent elements together using a needle and thread, and fill in the gaps with an irregular mesh (chains of air loops). There are several types of joining motifs: you can first knit the warp mesh using a hook, and then attach the flowers or connect them while knitting, although this method is more suitable for more experienced needlewomen.
The spring model of the cap is made in bright colors.
Video tutorials on crocheting openwork hats
Beautiful spring crochet hat
The openwork hat is crocheted from Chinese yarn, 70% bamboo, 30% cotton. 1 skein was enough, thread length 110 m. Hat for a 14 year old girl.
Crochet spring hat for beginners
The hat is not entirely lacy, but not warm either. Knit in the round from bottom to top, starting with rib. Milk cotton yarn 150m/50g, hook 3.5 mm.
The video should load here, please wait or refresh the page.
Long openwork hat for spring/summer, crocheted
Hook 3.75. Yarn Kamtex BAMBINO 150m/50gr Consumption 80 gr. Color "005 beige". Size 56-58.
The size can be easily adjusted by hook size and/or yarn selection.
The video should load here, please wait or refresh the page.
Master class Crochet openwork hat
The hat is knitted in the shape of a tube with a cord.
Yarn 100g/200m and hook No. 2.5 and 3.75 mm.
The video should load here, please wait or refresh the page.
Crochet hat with openwork pattern
- This short and high-quality master class will help you knit an openwork hat.
- We will need 1 skein of VITA “ALPACA WOOL” yarn (100g, 300m) and hooks No. 2.5 and No. 3.
- Yarn VITA "ALPACA WOOL", as well as hooks to choose from.
The video should load here, please wait or refresh the page.
Knitted hats for women: patterns, descriptions, modern models
Three reasons why you need to learn how to knit hats:
First: Today it is difficult to find a knitted hat made from natural yarn in stores. At best, it will be a wool mixture with 50% acrylic, but, alas, you will not find 100% alpaca or merino wool with a touch of silk. But in stores you can easily buy wool with the desired composition and knit a hat for yourself without synthetics.
Second: it's all about the style. To find a hat model that suits you, you need to visit all the stores in the city, is this familiar to you? Isn’t it easier to buy yarn and knit a hat with your own hands according to the description from the website? The Kolibri website presents many modern models of knitted hats with descriptions in Russian.
Third: A knitted hat is the perfect gift for a loved one. For mom or grandma, brother or sister, dad or dear husband: a knitted hat with knitting needles with your own hands will give them a piece of the warmth of your hands, and will be the perfect way to express your concern for loved ones.
I wish you easy stitches and successful knitting with the Kolibri website!
A beautiful and fashionable women's hat is not necessarily something expensive bought in a store. You can create it with your own hands, having only 150 grams of good yarn and knitting needles. Winter and autumn hats require not only aesthetics, but also the ability to retain heat by letting in the right amount of air. That is, to...
Winter won't take you by surprise if you know how to knit! We will also come to your aid by providing a drawing and diagram for a beautiful and easy-to-make hat with a lapel, decorated with a braid pattern. To knit the hat, yarn consisting of 100% cashmere is used. This means you will be warm and comfortable...
Are you planning to buy a warm hat for the winter? Why not knit it yourself? There is an interesting and very fashionable model, with a cute pattern. Think it's too difficult? Not at all. Simple and familiar techniques are used here. And the amount of work is not at all large. You will definitely be in time for the coming cold weather, even...
A warm hat for the winter does not have to be fur and very expensive. There are many options for knitted products in which autumn and winter will be spent in an atmosphere of warmth and comfort. This model, decorated with an original leaf pattern, is quite capable of warming you up. The main thing is to choose good yarn. Woolen wool may be suitable for this...
We knit an excellent autumn-winter women's hat with a simple but original pattern. Doing this kind of work takes a minimum of time, but you get a wonderful, warm and very comfortable thing. It seems thin, but thanks to the natural wool and mohair yarn used, it turns out to be quite dense. You need to try to freeze in such a hat. However, she doesn’t...
A two-tone wool hat like this looks not only beautiful and fashionable, but also very unusual. Knitting with an elastic band is not difficult. You yourself know this very well. And if not, you will quickly understand it by looking at the job description. As you can see, you only need a certain amount of wool yarn in two colors (gray and...
A warm and very comfortable woolen hat for a girl, decorated with an original pattern of intertwined braids and plaits. Knitting such a pattern is much easier than you might think by looking at the picture. Standard knitting elements are used. Therefore, even a beginner knitter will not have any difficulties. At the same time, the hat turns out to be quite modern and not at all old-fashioned. ...
If you like to create beautiful fashionable things with your own hands, then our article with a detailed description and diagrams on how to knit a hat for a woman is especially for you.
Honestly, today every woman must be able to knit, because there is nothing more pleasant than the opportunity to pamper herself and her loved ones with budget new clothes.
How to knit a warm hat for women?
If you are still a beginner, you can start with our first tutorial on how to knit a simple hat for a woman. As a visual aid, you can use the videos we have selected on how to knit a hat for a woman.
How to knit a simple wool hat
Knitting a beautiful hat is not as difficult as it seems. To do this, you need to arm yourself with knitting needles, yarn and patience.
Necessary:
- 125 g mohair
- knitting needles 4.5 mm
PP (patent stitch) = insert the right needle into the next stitch one row below (discard the loop of the current row).
Description:
Popular articles:
Cast on 75 stitches and knit with an elastic band as follows:
Row 1 (RS): k2, *p1, k1; repeat from * to last stitch, k1.
Knit another 8 rows with an elastic band, finishing on the wrong row.
Row 1 (RS): K1, *PP, K1; repeat from * to the end of the row.
2nd row (WS): k2, *PP, k1; repeat from * to the end of the row.
Repeat 2 rows of the pattern until the height of the cap is 26 cm from the cast-on, ending on a purl row.
Top formation:
Row 1 (RS): K1, *PP, P3tog; repeat from * to last 2 stitches, PP, k1 = 39 stitches.
Row 2 (WS): k1, *p1, k1; repeat from * to the end of the row.
Row 3 (RS): *k2tog; repeat from * to last stitch, k1 = 20 stitches.
Row 4 (WS): P1, 9 times, P1 (0) = 11 stitches.
Beautiful winter hat made of angora
Necessary:
- 120 g angora
- circular knitting needles 5 mm
- stitch marker
- set of double-edged knitting needles 5 mm
- knitting needle
Garter stitch: knit stitches in each row.
Openwork pattern (the number of loops is a multiple of 7).
Round 1: knit stitches.
Round 2: *K1, K2. together, yarn over, knit 1, yarn over, 1 p. remove, knit 1. and stretch it through the removed st.; repeat from * to the end of the circle.
Round 3: knit stitches.
Round 4: *K2. together, yarn over, knit 3, yarn over, remove 1 stitch, knit 1. and stretch it through the removed st.; repeat from * to the end of the circle.
Repeat 1-4 rounds. row of pattern.
Description:
Cast on 84 stitches on circular needles. Do not join in a circle, knit in straight and reverse rows in garter stitch 2.5 cm. Place a marker at the beginning of the row and join in a circle. Repeat 1-4 rounds. rows of openwork pattern 6 times.
Top formation:
Switch to double-pointed needles when the number of stitches decreases.
Round 1: *knit 10, knit 2. together; repeat from * to end of round = 77 sts.
Rounds 2, 4 and 6: knit stitches.
Round 3: *knit 9, knit 2. together; repeat from * to end of round = 70 sts.
Round 5: *knit 8, knit 2. together; repeat from * to end of round = 63 sts.
Round 7: *knit 7, knit 2. together; repeat from * to end of round = 56 sts.
Round 8: *knit 6, knit 2. together; repeat from * to end of round = 49 sts.
Round 9: *knit 5, knit 2. together; repeat from * to end of round = 42 sts.
Round 10: *K4, K2. together; repeat from * to end of round = 35 sts.
Round 11: *K3, K2. together; repeat from * to end of round = 28 sts.
Round 12: *K2, K2. together; repeat from * to end of round = 21 sts.
Round 13: knit 1, knit 2. together; repeat from * to end of round = 14 sts.
Round 14: K2. together; repeat from * to end of round = 7 sts.
Cut the thread, leaving a long end. Thread the piece through a knitting needle, pull through the remaining stitches and pull off. Thread the thread from the cast-on stitches into the needle and sew a garter stitch. Hide the remaining threads on the wrong side.
Warm grass hat
Necessary:
- 100 g yarn grass
- knitting needles number 6.
Description:
Start knitting by casting on 60 stitches on needles No. 6. Knit with 1x1 rib for about 4 cm.
In order to expand the circle, every 5 loops add 1 loop with a twisted yarn over. Then knit straight 5 cm, after which start decreasing 1 loop in each front row every 5 loops. Use a needle to gather the remaining loops (there will be about 10) onto a thread folded in half, and then fasten it.
The hat must be sewn with a knitted seam.
(On YouTube you can watch a video on how to knit a simple hat with knitting needles.)
How to knit a fashionable hat
Once you have learned how to knit simple hats, you can move on to more complex patterns. In 2018, the following models will be relevant: a voluminous hat, a hat with earflaps, a beanie (also called a stocking cap, a sock, a cap), a turban, a hood (or a helmet hat), a model with a visor, a hat with a pompom, a double a mischievous hat with ears, a regular one with a lapel, a snood hat (or a hooded hat).
Fashionable voluminous hat made of large yarn
Universal size 53-54 cm.
Necessary:
- thick yarn 200 g
- circular knitting needles 10 mm, length 40 cm
- stitch marker
- thick knitting needle
Description:
Cast on 32 loops. Place a marker at the beginning of the row and join into a circle.
Knit with an elastic band as follows: *k2, p2; repeat from * to the end.
Work 14 more circular rows and decrease 2 stitches evenly, knitting 2 knits together in the last rib circle = 30 stitches.
Next, knit 12 circular rows with knit stitches only.
Track. round: knit 2 stitches together = 15 stitches.
Work 2 more rounds with knit stitches. Cut the thread, leaving a long tail. Thread the piece into a knitting needle. Slip all loops onto the thread. Pull and secure the thread on the wrong side.
Universal hat with earflaps for women
Size - 54 cm (head volume)
Necessary:
- 250 g yarn
- regular knitting needles 4 mm
The hat can be knitted in 2 threads.
Ears:
Cast on 6 stitches and start knitting a hat in garter stitch. At the same time, add 1 loop on both edges 6 times every 2 rows. Then knit straight for another 14 rows.
If you add more loops, your eye will be much wider. If you knit more rows, then your eyelet will be longer than in the photo. So, you have knitted 2 identical ears.
HAT WITH EAR FLAPS:
Now we collect everything into one product. To do this, on a long knitting needle, alternately cast on the loops from your ears and new ones for the front and back of the hat. Please note that at first the back of the hat will gradually increase in size and will eventually consist of two parts connected by a mattress seam. For a visual representation, look at the photo of the pattern.
Thus, you need to add 1 loop, knit the loops of one ear using knit stitch (or any other stitch, if you don’t want the option from the photo), cast on an additional 20 loops for the front of the hat, knit the second eye and cast on an additional 1 loop.
Continue knitting the hat using your pattern or stockinette stitch as suggested in the photo. At the same time, add loops to expand the back of the product in every second row on both sides of the knitted fabric 1 time for 2 loops and 1 time for 3 loops. This will be about 8 rows. This will be the full width of your header. If necessary, you can adjust it by adding more loops during the knitting process.
You need to knit about 16 more rows, which will be the height of the cap before tapering at the crown.
Decrease in this way: 1 edge loop *, 5 knit loops, 2 loops with a tilt to the right, 2 knit loops, 2 loops with a tilt to the left, 5 knit loops *, repeat from * to *, 1 edge -I'm a loop.
Decrease stitches in this manner 3 more times every 2 rows, and pull off the remaining stitches after 2 rows. Sew the hat at the back using a mattress stitch.
For the front lapel, cast on 20 stitches along the edge and knit in garter stitch to the desired height. then close all the loops and attach the flap in any suitable way.
For braids, you need to cut 18 threads 1 meter long, fold them in half and thread them through the bottom of the ears and braid them into braids.
Knitted beanie hat (stocking hat, sock hat, cap)
Necessary:
- circular knitting needles 4 mm
- 200 g medium yarn
- tape measure
Description:
First of all, using a measuring tape, measure the circumference of the head for which you plan to knit a hat. Let's say you get 56 cm. This means that you will knit a size 56 hat.
The second important step is to determine the knitting density. What does knitting density mean? This is the number of loops and rows required to knit a fabric measuring 10x10cm. What this means in “simple language” is to correctly calculate how many loops you need to cast on at the beginning of the work.
Cast on 22 loops and knit 10 cm in the pattern chosen for the hat.
Iron the knitted sample through a damp cloth. You don't need to smooth it out too much. Do this carefully, lightly “steaming” the sample.
Measure the prepared sample around the perimeter. Let's say you get a sample measuring 10x10 cm when knitting 30 rows. This means that the knitting density with this pattern will be 2 loops per 1 cm and 3 rows per 1 cm.
That is, for a size 56 cap you need to cast on: 56x2=112 stitches and knit 30 cm, that is, 30x3=90 rows.
Cast on the required number of stitches on circular needles. And knit in a circle, using the fishing line, with the previously selected pattern 25-27 cm up. You will get a knitted fabric in the form of a pipe. After 25 cm, start decreasing stitches by knitting 2 stitches together in every third row until you have 3 stitches left on the needle. When decreasing the stitches, knit the fabric in garter stitch. Break the thread from the skein, leaving about 10 cm, and pull it through the 3 remaining loops, knitting them together and securing the end on the wrong side.
Watch the video “knit a beanie”.
Wool turban hat for the cold season
Necessary:
- 150 g wool yarn
- knitting needles No. 2.5 - 3
Knitting pattern: 1st row - 1 knit stitch, 1 purl loop. 2nd row - yarn over before the purl loop, and remove the purl loop without knitting; knit the front loops with your face. 3rd and all subsequent rows - yarn over before the purl loop, remove the purl loop without knitting, and knit the front loop and yarn over of the previous row together (grab from above).
The cap consists of two parts: the turban itself and the bottom. The height of the turban is 10-12 cm.
Description:
Cast on the height of the turban, approximately 24 loops, and knit a strip whose length is equal to half the circumference of the head minus 2 cm.
Then divide all the loops in half. Remove the left side with a pin and do not knit it temporarily, but knit 4 more rows on the right side. After this, swap both parts so that the right part goes to the left and on top of the left part. Next, put all the loops on one knitting needle and knit the second half of the strip.
If, when knitting the second half, there are two identical loops next to each other, then knit them together (so as not to knock the pattern), and at the end of the row add one loop. When the desired length is knitted, close the loops.
Now cast on loops along the entire length of the strip and knit 7 - 8 rows with an English elastic band, then 2.5 cm with a 1x1 elastic band. After this, start knitting the bottom: 2 rows with double stockinette knitting (knit the front loops with the face, remove the purl stitches, the thread remains before work). Then knit 2 stitches together across the face, so that the knit stitch is on top of the purl stitch. Knit 3-4 rows in simple stockinette stitch, then 2 rows across the face in double stockinette stitch, the next 1-2 knit rows in 2 stitches together. Pull the remaining 6-8 loops. Steam the bottom through a damp cloth.
Video “knitting a turban for a woman”
An original bonnet (or helmet) for the very cold season
Necessary:
- 400 g yarn
- knitting needles No. 3
Description:
You need to cast on 31 stitches on the knitting needles and knit a transverse strip of any knitting that you choose yourself for a frill 110 cm long, so that it has a beautiful and finished look, then make the corners on it in shortened rows.
In each row, be sure to decrease the knitted loops by 2, that is, first you need to knit 29 loops on the front side of the product, then leave 2 loops intact, wrapping around the 30th loop and turning the knitted product to the wrong side, then knitting the entire row to the end.
In the next row on the front side, also knit 27 loops, leaving 4 loops intact.
Wrap around the 28th loop and turn it over again to the wrong side. Thus, knit the entire product.
Having stopped under-knitting all the loops of the corner, begin to knit the main part, increasing the rows, which will make it possible to change the direction of knitting. First, knit three loops on the front side, and in subsequent rows increase the number of loops by 2, but only knitted ones.
Having knitted the strip with the corners, on one side, cast on about 180 loops along the edge loops and knit the product with garter stitch. Then remove one stitch every three stitches on the next row. Repeat such decreases 2 more times. Then knit 5 cm in garter stitch.
After 5 cm for the main part of the hood, add evenly up to 90 stitches and again knit another 17 cm in garter stitch. Then select 30 loops in the center and knit only them, grabbing and knitting together - both at the beginning and at the end - 2 loops from the central part on each side. After all the central loops are connected to the side loops, close the remaining loops.
Hat with visor
Necessary:
- 250-300 g yarn
- circular knitting needles No. 2.5
- silicone visor
Description:
Cast on 80 loops, close in a circle and knit 4-6 rows in stockinette stitch, i.e. facial loops.
When I join in a circle, I leave a tail of thread to mark the beginning of the row. Divide the number of loops into three parts - 18 stitches, 44 stitches, 18 stitches. On 44 loops we will knit a visor, making an increase of 10 loops every 4 loops. We make an increase so that the visor fits well and fits comfortably in its pocket.
When the pocket for the visor is knitted and the decreases are made, we knit the second half of the headband.
We fold the fabric into pieces, throw the tail of the thread onto the face of the knitting (beginning of the row!). We knit one loop from the knitting needle, lift one and knit it from the cast-on edge. We reach approximately the middle of the visor, insert the visor blank and continue knitting loops to the end of the row, i.e. to the tail.
The upper part of the rim (i.e. the front) should be several rows larger than the inner one (to hide the holes from turning).
And so we have 160 loops on our knitting needles. You can start knitting the crown. We divide the loops into 8 parts (wedges) and knit a zigzag pattern. One wedge - 20 loops. Rapport-*from 1 pet. knit 3 loops, knit 8, 3 loops together (behind the back wall), knit 8* - repeat 7 more times. If you want a larger cap, you can add 16 stitches = 176 stitches. One wedge - 22 loops. Rapport-*from 1 pet. knit 3 loops, knit 9, 3 loops together (behind the back wall), knit 9* repeat 7 more times.
We knit the crown height we need, knitting one row in a zigzag pattern, one row evenly.
Tulya is ready. We begin to make reductions. One row is zigzag, one row is straight.
One row - we knit only 3 loops together, and we don’t make 3 loops from 1 loop, one row exactly.
When there are 16 loops left on the knitting needles, knit 2 loops together and pull them onto a thread.
The cap is ready!
(Watch the video from the best needlewomen of the network “ knit a hat with a visor" on the YouTube channel).
Stylish hat with pompom
Universal size.
Necessary:
- 1 skein of yarn (75% acrylic, 25% wool; 136 m/85 g) in three different colors: Oxford Gray (78046) – A, Steel Blue (78105) – B, Soft Teal (78209) – C;
- knitting needles 5.5 and 6 mm;
- auxiliary knitting needle.
Knitting density:
15 stitches and 20 rows = 10cm in stockinette stitch on larger needles.
Legend:
K8P = slip 4 stitches onto the auxiliary needle while working, k4, then 4 knits from the auxiliary needle;
K8L = slip 4 stitches onto the auxiliary needle before work, k4, then k4 from the auxiliary needle;
+1 (add 1 loop) = lift the loop from the broach and knit the front one behind the back stitch. wall.
Description:
On smaller needles, using thread A, cast on 73 stitches and knit 7.5 cm with an elastic band, k1, p1. Finish on a purl row.
Switch to larger knitting needles.
1st row (RS): knit with thread B k3, *+1, k2, +1, k3; repeat from * to end = 101 stitches.
3rd row: k5, *K8L, k4; repeat from * to the end.
from 4th to 10th row: start on a purl row and knit in stockinette stitch (7 rows in total).
Row 11 (RS): K1, *K8P, k4; repeat from * to last 4 stitches, k4.
13th row: facial loops.
Rows 15 and 17: knit with thread C.
from the 19th to the 27th row: knit with thread C and repeat from the 3rd to the 11th row again.
Row 28 (WS): purl stitches.
Top formation:
Row 1 (RS): k1, *k2tog, k3; repeat from * to end = 81 stitches.
2nd and all purl rows: purl stitches.
Row 3: k1, *k2tog; repeat from * to end = 61 stitches.
Row 5: k1, *k2tog, k1; repeat from * to end = 41 stitches.
7th row: k1 * k2tog; repeat from * to end = 21 stitches.
Cut the thread, leaving a long tail. Using a needle, pull the piece through the remaining stitches. Pull and secure the thread. Make a seam.
Pompon:
With thread A in 2 folds, wrap your hand about 50 times. Leave a long piece. Carefully remove the skein from the rug and tie it tightly. Sew the pompom to the top of the hat.
Watch the video on how to knit a hat with a pompom:
Warm double hat for winter
Necessary:
- circular knitting needles;
- yarn of your favorite color;
- soft yarn for lining;
- tape measure;
- scissors;
- hook.
In order to knit a double hat of your size, you need to know the circumference of your own head. Determine it using a measuring tape. Write down the result and calculate the stitches for the set. A standard for which you need to knit a small square using a working thread will help you make the calculation correctly. Count the number of loops in one centimeter of the standard.
To knit the front part of the hat, multiply this amount by the circumference of the head in centimeters and add 4-5 loops for supply. For the lining, take yarn designed for knitting children's clothes. It does not prick and does not cause skin irritation.
Description:
Cast on the required number of stitches on two knitting needles folded together, pull out one of the knitting needles and start knitting an elastic band.
The most reliable elastic band is 1x1. It stretches well and retains its original appearance for a long time. Having knitted 5-6 cm of elastic bands, start stocking knitting. When knitting in the round, it is better to knit the front loops using the front thread, so they turn out more even.
Knit the main part of the hat with a height of about 15cm. Then start decreasing. If you decide to knit a double hat on radial knitting needles, divide the number of loops by 4, mark each part and first knit 2 loops together for each part. In this case, if knitting is done with a set of 5 knitting needles, knit 2 loops first on each knitting needle.
Once all the loops are closed, secure the thread to the wrong side of the hat with a crochet hook.
For the lining of the hat, cast on loops from the wrong side of the main fabric, immediately after finishing the elastic band. Don't forget to decrease 4-5 stitches. Knit in stockinette stitch. Tie the lining 1-2 cm shorter than the main part of the hat and close it according to the same pattern.
Wash knitted items by hand, in warm water, using special detergents for washing knitted items. They must be wrung out without twisting, but dried on a terry towel in a straightened form.
Hat with ears
Size 56-57.
Necessary:
- 150 g yarn
- circular knitting needles 4 mm
Description:
For the first “ear” you need to cast on 7 loops and knit in this order: 1Krom., 1IP, 1LP, 1IP, 1LP, 1IP, 1Krom.
The 2nd and all purl rows are knitted according to the pattern.
Once you have about 21 stitches on your needles, measure the length of the eyelet.
If the length is suitable, then set it aside and start knitting the second one.
If not, then knit directly the required length, but without adding loops.
Tie the second “ear” in the same way.
Then, on circular or stocking needles (you can knit on straight ones, but then there will be a seam along the back of the head, and the loops will need to be distributed taking into account this seam), cast on 33 loops, add 21 loops of the first “eye”, cast on 33 loops again, add 21 loops of the second “eye”.
Next, knit with a regular elastic band 1LP x 1IP for about 3-4 rows. Make sure that the elastic pattern is distributed harmoniously across the new cast-on stitches.
Those. for the front and back of the cap, which consist of 31 loops, distribute the loops as follows:
7 elastic loops, 6 elastic loops, 7 elastic loops, 6 elastic loops, 7 elastic loops = 33 loops in total; for the “ears”, each of which consists of 21 loops, distribute the loops in this way: 6 loops of the harness, 1 IP, 6 loops of the harness, 1IP, 6 loops of the harness = a total of 20 loops. Carefully shorten 1 loop, i.e. knit 2 loops together without ruining the pattern.
Knit straight, repeat the repeat of the “harness” according to the pattern, about 14-16 centimeters.
Then start decreasing stitches.
To do this, in every 4th row, reduce evenly throughout the entire row:
3 times 1/4 of the total number of loops
Check the height of the cap, if it fits, then pull the remaining loops with the end of the thread and secure them. As a rule, the height of a hat with ears can be from 20 to 22 centimeters. Perhaps some people like it taller.
If the height is not enough, then knit a few more rows in height, while shortening the existing loops, and close at the end.
For the ties, attach pieces of yarn to the ends of the “ears”. About half as long as the desired length of the strings themselves. Take the yarn in several threads for three parts, which you will then braid into a braid. This will be your tie. Tie a knot at the end and straighten the yarn at the bottom of the tie with scissors.
For the top of the head, make a pompom.
Watch the video “how to knit a hat with ears for a woman”
Winter knitted hat with lapel
Size 56-57.
Necessary
- 150 g yarn
- regular knitting needles No. 5
Description:
The number of loops should be divided by 4, plus 2 edge loops. If we knit for an adult, approximately 98 loops will be required: 96+2=98.
We cast on loops and start knitting the first row: remove the edge loop without knitting, then 2x2 elastic: 2 knit loops, 2 purl loops, always knit the last loop of the row (edge loop) purl to maintain even edges of the product. We always remove the first stitch of the row without knitting.
All further rows, both purl and knit, are knitted according to the pattern: 2 knit stitches above the knit stitches, 2 purl stitches above the purl stitches.
When the required depth of the cap is reached, taking into account the lapel option you have chosen, we begin to make decreases from the next front row: we knit 2 purl loops together with a purl loop.
In the second row (purl) we knit according to the pattern: 2 purl loops, 1 knit stitch.
In the third row we decrease the knit stitches: instead of two knit stitches, we knit two knit stitches together. The result is a 1x1 elastic band: 1 knit stitch from two knit stitches, 1 purl loop.
Fourth row - according to the pattern: 1 purl loop, 1 knit stitch.
For the fifth row (front row), we knit two stitches together.
And the sixth, final row - purl all the loops.
As you can see, decreases when knitting a hat from a rectangle have the same principle as when knitting in the round, only adjustments are made to the front and back rows.
When knitting a hat from a rectangle, it is better to leave the tip of the thread sub-line so that it is enough for the back seam. We collect the remaining loops on it using a hook or a large needle, pull it into a ring and carefully sew the cap together. You can connect the edges of a cap in different ways (with seams), this is a reason for a separate article, but the main goal in any case is to make sure that the seam looks equally neat both on the front side and in that part of the back that will be visible when the edge of the cap is turned back . Remember this!
That's all. We tangle it, cut off the excess end of the thread and go to try it on.
I wish you interesting work and warm hats!
If you need a visual example, watch the video as knit a hat with a lapel on YouTube.
Hit of the season - snood hat
Necessary:
- 200 g yarn
- circular needles No. 5
First, decide on the width and length of the future product, and then knit a small piece with the knitting stitch you prefer. Having chosen the fragment you like, you can count the number of loops for the product. So, cast on the required number of stitches on circular knitting needles. The proposed snood should be knitted with a Polish elastic band. This knitting is not very difficult, and if you are knitting it for the first time, don’t be afraid, you will adapt quite quickly.
The resulting chain of loops must be connected into a circle and knitted.
First row: 3 knit stitches and one purl stitch.
Second row: two knit stitches, one purl stitch, and one knit stitch.
Third row: knitted similarly to the first row.
Fourth row: knit the same way as the second one.
Then continue knitting in cycles. Don’t forget that the wider the hat, the more effectively it can be placed on your head. |
Video "how to" “knit a snood hat” will help beginners learn in more detail the whole process of creating such a beautiful knitted creation.
How to knit a hat with a pattern
Hats with a pattern look more impressive, but they are much more difficult to knit, since you need to monitor both the shape of the hat and the pattern. Sometimes you get lost and have to start all over again. But if you are careful and practice on a small sample, you will succeed the first time.
English elastic hat
Necessary:
- wool yarn – 50 g at 135 m;
- straight knitting needles No. 4 – 2 pcs.;
- crochet hook;
- scissors;
- darning needle.
1. Find out the head circumference of the future owner of the headdress and be sure to make a small square of knitted fabric for the sample - the knitting density is always calculated individually. When knitting a hat with English elastic, an elastic, almost dimensionless product is created. In the described example, with a head circumference of 55-60 cm, a knitwear density of 18 loops for 46 rows, 78 loops are cast on for the headband of the hat. The knitting needles are straight and of medium diameter (No. 4).
You can start knitting a hat with English elastic without making an elastic border. At the same time, you can make the fabric of the product either with or without a turn. Please note: the 1x1 elastic band secures the edge well!
2. Knit the headband in straight and purl rows, alternating 2 knit stitches and 2 purl stitches. When 8 rows are ready, start knitting the hat with an English elastic band. In the first row of the pattern you will need to make even increases, bringing the total number of loops to 95.
To add loops, divide the row into equal sections, and knit an additional thread in each. To do this, grab and twist the transverse threads between adjacent loops.
3. Work the fluffy fabric with an English elastic until you reach a height of 25 cm from the edge of the rim. To form the main knitwear pattern, alternate stitches in the following sequence. In the first row of the pattern, do only knit stitches; start the second row with the edge loop (it can be removed unknitted); do the front one. Next, repeat the so-called double knit stitches, inserting the right knitting needle into the thread bow of the previous row. The final loops are the front and edge stitches.
4. Start the third row of English rib also with an edge loop, then alternate double and regular knit stitches until there are only a couple of thread arches left on the left needle. Knit the first one as a double knit stitch, the second one will be an edge stitch. Repeat the pattern according to the finished sample of the second and third rows until you have made the main fabric of the headdress of the desired size.
5. Start shaping the crown of the hat. To round the knitted fabric and tighten it at the top, make uniform decreases in the forward and reverse rows: at the beginning, an edge loop; during a row of 3 thread arches are knitted together with a regular knit stitch; at the end - edging. In the next row, make decreases without leaving edges, always knit 3 loops together.
6. Cut the working yarn, leaving a tail about 10 cm long. Pull it over the open loops of the last row and drag it with the hook inside the hat. Form a strong knot.
7. Turn the hat wrong side down, steam the knitted fabric and carefully connect the side edges of the part. Make a neat connecting seam using a darning needle and thread from a working ball. To ensure that the stitching remains sufficiently elastic and the product does not deform, do not make the stitches too tight.
Watch the video “how to knit a hat with an English elastic band”
Stylish hat with braids
Necessary:
- 150 g yarn
- knitting needles No. 3.5,
- knitting needles No. 4, 5
I knitted it on two needles, because I have a large thread on circular needles and it results in a lot of tension and large holes between the loops, and I like it tighter. Then I sewed it together.
I cast on 96 stitches on the knitting needles. Knitting needles No. 3.5. Knitted in 2 threads, yarn with 20% wool, 135g per 50m.
I knitted a 2×2 elastic band about 6 cm.
Switched to knitting needles No. 4.5
Pattern:
- (p2, k6, p2, k2) - repeat until the end of the row.
- knit according to the pattern, where from inside to outside, where from faces to faces.
Knit 6 rows like this and in the 7th row make overlaps where there are 6 faces. (YouTube is full of videos on how to knit braids). I did this: I transfer 3 loops to a toothpick, knit the next 3, return these 3 loops from the toothpick to the left knitting needle and knit them too. Then, according to the pattern, 2 purl, 2 knit, 2 purl and again overlaps. So until the end of the row.
After these overlaps, we knit 1 row on the wrong side according to the pattern, I don’t count it.
And repeat all 6 rows again, overlap in the 7th
And repeat all 6 rows again and overlap in the 7th
In total, we made 3 braids. And from the beginning of knitting we knitted about 15-17 cm.
By watching in addition the video “how to knit a hat with braids for a woman,” you can easily master the science of knitting.
