2nd row: knit in both half loops. 1 ch, 1 tbsp. without nac. in the first 9 stitches, ch 1, skip next. p., knit 1 tbsp in the back half loops. without nac. next 5 sts., ch 1, skip next. p., knit 1 tbsp in both half-loops. without nac. next 9 sts., ch 1, skip next. p., 1 tbsp. without nac. next 5 tbsp, turn.
3rd row: knit in both half loops. 1 ch, 1 tbsp. without nac. in the first 5 stitches, ch 1, skip next. p., 1 tbsp. without nac. next 9 sts., ch 1, skip next. p., knit 1 tbsp in the back half loops. without nac. next 5 sts., ch 1, skip next. p., knit 1 tbsp in both half-loops. without nac. next 9 tbsp. turn.
Rows 4-14: repeat rows 2-3 alternately. Break the thread.
Sidewalls of the base.
1st row: work is carried out in the left half loops of the initial chain in 5 sts of the front part of the base. (see knitting pattern). Attach the thread using st. without nac. in the first st. after the missing p., 1 tbsp. without nac. next Art., turn.
2-9 row: 1 vp, 1 st. without nac. in each stitch, turn. When finished, break the thread.
The second side is knitted in st. 36 rows. Repeat rows 1-9 of the first side panel.
Cut 1" thick foam rubber into two pieces measuring 3" x 3 1/2"
Sew the base according to the pattern ris2.jpg. Insert one of the resulting pieces inside.
Back
Start knitting with a chain of 25 vp.
2-82 row: work is carried out in the rear half-loops. 1 vp, 1 tbsp. without nac. in each stitch, turn. When finished, break the thread.
Pillow
Start knitting with a loose chain of 22 vp, closed in a ring. The chain should have a long tail.
Row 1 (circular): ch 1, st. without nac. in the first paragraph, 1 tbsp. without nac. in each stitch, close the row into a ring in the first stitch, turn. (22)
Rows 2-16 (circular): work is done in the rear half loops. 1 vp, 1 tbsp. without nac. in each stitch, turn. When finished, break the thread, leaving a long tail.
Cut a piece of 1/2" thick foam rubber into two 3" x 3 1/2 pieces. Insert the foam rubber into the cushions and sew up the open ends with long tails.
Finishing work.
Wrap the back around the base so that at the front corners of the base (see Fig. 3) there are back ribs formed by the front half-loops of the row. Sew the back to the base along the perimeter of the base as shown in the picture. Fold the back pieces left at the front back and sew the first and last rows of the back together.
Sew up the top and bottom of the back. Unscrew the top corners of the backrest by 1/2" (1.3 cm), unscrew it again. Secure them in this position. After that, unscrew the top part of the backrest about 1" (2.5 cm) and secure it in this position.
Put down pillows.
You will need: yarn “Soufflé” (100% acrylic, 292 m/100 g) - remains of blue, white flowers, knitting needles No. 2.
Sofa
Cast on 3 stitches with blue thread, knit garter stitch 4 rows with blue thread, 4 rows with white thread, adding 1 stitch at the beginning of each row until there are 50 stitches on the needles. Then continue adding at the beginning of every 2nd row and decreasing at the end of every 2nd row, 1 loop - another 50 rows. Close the hinges. For the side walls, cast on 12 stitches and knit 20 rows with blue thread. Sew the seams. Make a sofa frame out of cardboard, stretch the parts onto the frame.
Armchair
Cast on 30 stitches with blue thread, knit garter stitch 2 rows with blue thread, 2 rows with white thread for 100 rows. Close the hinges. For the side walls on both sides, cast on 12 stitches and knit 20 rows. Close the hinges. Make a seam. Make a frame out of cardboard, stretch the part onto the frame.
Pillows
Cast on 10 stitches and knit stitches. stitch 20 rows. For one pillow, knit 2 parts, connect them together with a hook in one row of st. b/n. Fill lightly with padding polyester. Knit white and blue pillows.
Crochet D (3.25mm) using very thick yarn.
You will need:
* thick white yarn or 1 large skein of yarn No. 10;
* one small skein of thick or thin yarn of finishing color: light pink, light green, light lilac, light yellow, yarn sectional dyeing(see photo);
* a little synthetic filler (sintepon, cotton wool) and thread for stitching;
* filler (white beans);
* thin white plastic straw (or wire);
* thick cardboard or plastic;
* hook D (3.25mm) or No. 7 (1.5mm).
Dining table
Central base (bottom of the leg)
1st row: 2 vp, 6 st. b/n in the 2nd st. from the hook, close into a ring using a half stitch. b/n
3rd row: 1 ch, (st. b/n, 2 tbsp. b/n in the next st.) - repeat to the end of the row, connect half stitch. b/n. (18th century)
4th row: 1 ch, (2 tbsp. b/n, 2 tbsp. b/n in the next st.) - repeat to the end of the row, connect half stitch. b/n (24 tbsp.) Insert a cardboard or plastic circle of the appropriate diameter.
5th row: 2 ch, half st. s/n behind the back wall of the st in each st of the previous row, connect half stitch. b/n
6 - 8 row: 2 vp, 23 half stitches. s/n, connect half st. b/n.
Row 9: ch 1, st. b/n behind the back wall of the stitch in each stitch of the previous row, connect half stitch. b/n (24st.)
Row 10: ch 2, half st. s/n behind the back wall of the st in each st of the previous row, connect half stitch. b/n
11 - 15 row: 2 ch, 24 half stitches. s/n, connect half st. b/n. Fasten the thread.
Base (“skirt”):
Row 1: join thread to row 9, ch 3, st. s/n in the same paragraph, 2 tbsp. s/n in each st., connect half st. b/n. (48 st.)
2nd row: ch 3, raised stitch. s/n in the next st., (raised purl st. s/n in the next st., raised front st. s/n in the next st.) - repeat to the end of the row, connect half st. b/n
3rd row: ch 1, raised stitch. b/n around 3 v.p. previous row, 2 ch, (raised purl st. s/n in the next st., raised front st. s/n in the next st.) - repeat to the end of the row, connect half st. b/n.
Row 4: ch 1, st. b/n in the next st., (skip st., 5 tbsp. s/n in the next st., skip st., st. b/n in the next st.) - repeat to the end of the row, join half st. b/n. Fasten the thread.
Row 1: join thread to row 9, ch 2, st. s/n in the same paragraph, 2 tbsp. s/n in each st., connect half st. b/n. (48 st.)
2 - 4 row: 1 vp, embossed front st. b/n around 2 v.p. previous row, 2 ch, (raised purl st. s/n in the next st., raised front st. s/n in the next st.) - repeat to the end of the row, connect half st. b/n.
5th row: ch 2, raised stitch. s/n in the next st., (reduce the loop using a relief stitch. s/n) - repeat to the end of the row, skip 2 ch, connect half st. b/n in the first relief st. (24 st.)
Row 6: using half stitch. b/n connect the last and initial rows of the ball, fill it with padding polyester.
Row 7: ch 3, st. s/n behind the back wall of the loop in each st. of the previous row, connect half st. b/n
8th row: ch 1, raised stitch. b/n around 3 v.p. previous row, embossed front st. s/n in each st., connect half st. b/n. Fasten the thread.
Top of the leg
Knit the first 4 rows of the central base.
Stuff the table leg with padding polyester. Connect the top of the leg to the bottom of the leg using a half stitch. b/n. Starch hard and let dry. (The original says that you need a highly concentrated spray for starching. I have never seen anything like that here.)
Top of the table
1st row: 2 vp, 6 st. b/n in the 2nd stitch from the hook. For lifting circles v.p. don't do it.
2nd row: 2 tbsp. b/n in each st. (12 tbsp.)
Row 3: (stc. b/n in the next st., 2 st. b/n in the next st.) - repeat 6 times (18 sts.)
4th row: (2 tbsp. b/n, 2 tbsp. b/n in the next st.) - repeat 6 times (24 tbsp.)
5th row: (3 tbsp. b/n, 2 tbsp. b/n in the next st.) - repeat 6 times (30 tbsp.)
6th row: (4 tbsp. b/n, 2 tbsp. b/n in the next st.) - repeat 6 times (36 tbsp.)
7 row: (5 tbsp. b/n, 2 tbsp. b/n in the next st.) - repeat 6 times (42 tbsp.)
8th row: (6 tbsp. b/n, 2 tbsp. b/n in the next st.) - repeat 6 times (48 tbsp.)
Row 9: (7 tbsp. b/n, 2 tbsp. b/n in the next st.) - repeat 6 times (54 tbsp.)
10th row: (8 tbsp. b/n, 2 tbsp. b/n in the next st.) - repeat 6 times (60 tbsp.)
11th row: (9 tbsp. b/n, 2 tbsp. b/n in the next st.) - repeat 6 times (66 tbsp.)
Row 12: (10 tbsp, 2 tbsp in the next st.) - repeat 6 times (72 tbsp.) Cut 3 circles of the appropriate diameter from cardboard or plastic and glue to the top of the table.
13th row: (11 tbsp. b/n, 2 tbsp. b/n in the next st.) - repeat 6 times (78 tbsp.)
Row 14: 4 tbsp. b/n, semi-st. b/n in the next paragraph, 2 vp, 1 half st. s/n behind the back wall of the loop in the next 78 sts, join half st. b/n
Row 15: ch 2, st. s/n behind the back wall of the loop, (knit 2 sts together behind the back wall of the st using a st. s/n) - repeat to the end of the row, connect half st. b/n. Fasten the thread.
Border:
Connect the table top to the leg.
Dining chair (2pcs)
Chair base
1st row: with a white thread, cast on 4 vp, close in a ring, 3 vp, 13 st. s/n in the center of the ring, connect half stitch. b/n (14 tbsp.)
2nd row: 3 vp, 2 tbsp. s/n in each st., connect half st. b/n (28 items)
(Cut 2 circles of the appropriate diameter from cardboard or plastic)
3rd row: knit the entire row behind the back wall of the loop. 2 ch, 27 half stitches s/n, connect half st. b/n (28 items)
4 - 9 row: 2 ch, 27 half stitches. s/n, connect half st. b/n
10th row: knit the entire row behind the back wall of the loop. 3 ch, 27 st. s/n, connect half st. b/n (28 items)
11th row: 2 ch, (skip the loop, half-st. s/n) - repeat until the end of the row, connect half-st. b/n.
"Skirt" for a chair
1st row: join the thread to the 9th row and knit around half st. b/n, connect into a ring half-st. b/n (28 items)
2nd row: knit the entire row behind the back wall of the loop - 3 ch, st. s/n in the same loop, (3 tbsp. s/n, 2 tbsp. s/n in the next stitch) - 6 times, 1 tbsp. s/n in the next 2 p., turn.
Rows 3 - 6: 3 ch, (raised purl stitch in next stitch, raised knit stitch in next stitch) - repeat until the end of the row, 1 ch, turn
Row 7: st. b/n, (skip st., 5 tbsp. s/n in the next st., skip p., st. b/n in the next st.) - repeat until the end of the row. Fasten the thread.
Chair seat
2nd row: ch 3, raised stitch. around these 3 vp, (st. s/n in the next st., raised knit stitch around the same st.) - repeat 13 times, connect half st. b/n
Row 3: ch 1, st. b/n in the next st., (relief st. b/n in the next st., st. b/n in the next st.) - to the end of the row, connect half st. b/n
4th row: knit the entire row behind the back wall of p. Polust. b/n in each paragraph.
5th row: knit half st. b/n grabbing the loops of the 3rd row of the chair base. Fasten the thread.
Chair back - middle (2 pcs.)
(3 v.p., treble s/n in the 3rd st. from the hook) - 6 times, 1 v.p., 3 tbsp. b/n in the first “loop”, 5 tbsp. b/n in each of the next 4 “loops”, 11 tbsp. b/n in the next “loop”, 5 tbsp. b/n in each of the next 4 “loops”, 3 tbsp. b/n in the last “loop”. Fasten the thread.
1st row: connect the two parts of the middle of the back and tie them together in half stitch. b/n without skipping a single stitch. Fasten the thread. (57 items)
2nd row: from the beginning of the first row, skip 15 sts, join the thread to the next st. using half st. b/n (this should be the middle of 4 “loops”) ch 2, skip 4 sts, st. s/n in the next paragraph, 2 vp, art. s/n in the same p., skip 3 p., st. s/n in the next paragraph, 2 vp, art. s/n in the same paragraph, skip the next paragraph, art. with 2/n in the next paragraph, 2 vp, art. with 2/n in the same st., skip the next st., st. with 2/n in the next st. (must be the middle of the central “loop”), (2 ch, dc with 2/n in the same st) - repeat twice, ch 2, skip next st ., art. with 2/n in the next paragraph, 2 vp, art. with 2/n in the same st., skip the next st., st. s/n in the next paragraph, 2 vp, art. s/n in the same p., skip 3 p., st. s/n in the next paragraph, 2 vp, art. s/n in the same p., v. 2, skip 4 p., half st. b/n. Fasten the thread.
4th row: attach the thread to the beginning of the 1st row using st. b/n, knit st. b/n behind the back wall of the next 14 sts, art. b/n for the back st.p. in half a century b/n 3rd row, skip next 2 p., art. s/n in the next p., (1 vp, st. s/n in the same p.) - repeat twice, skip 2 p., st. b/n in the next paragraph, skip paragraph, art. s/n in the next p., (1 vp, st. s/n in the same p.) - repeat twice, skip 2 p., st. b/n in the next p., skip 2 p., st. with 2/n in the next p., (1 ch, st. with 2/n in the same p.) - repeat 4 times, skip 2 p., st. with 2/n in the next p., (1 ch, st. with 2/n in the same p.) - repeat 2 times, skip 2 p., st. with 2/n in the next st. (top of the back of the chair), (1 ch, st. with 2/n in the same st.) - repeat 2 times, skip 2 sts, st. with 2/n in the next p., (1 ch, st. with 2/n in the same p.) - repeat 4 times, skip 3 p., st. b/n in the next p., skip 2 p., st. s/n in the next p., (1 ch, st. s/n in the same p.) - repeat twice, skip p., st. b/n in the next p., skip 2 p., st. s/n in the next st., (1 ch, st. s/n in the same st.) - repeat twice, skip the last loop of the 3rd row, st. b/n in the next paragraph of the 1st row, art. b/n for the back st. p. in the remaining sts of the 1st row. Fasten the thread.
Coffee table.
Leg
1st row: cast on 2 vp, 7 st. b/n in the 2nd st from the hook, connect.
2nd row: 1 vp, 2 tbsp. b/n in each st., connect. (14 tbsp.) Cut a circle of suitable diameter from cardboard or plastic.
3rd row: Knit behind the back wall of the loop, ch 2, half stitch. s/n in each st., connect.
4 - 5 row: 2 ch, half st. s/n in each st., connect.
6th row: knit behind the back wall of the loop, ch 1, st. b/n in each st., connect.
7th row: knit behind the back wall of the loop, 2 ch, half st. s/n in each st., connect.
8 - 9 row: 2 ch, half st. s/n in each st., connect. Fasten the thread.
"Skirt"
Repeat rows 1 - 3 of the table.
Ball
Repeat rows 1 - 4 of the table ball. Place a cardboard circle on the bottom of the leg and fill the leg with beans or other filling.
Top of the table
1st row: cast on 16 vp, 2 tbsp. b/n in the 2nd st. from the hook, 1 tbsp. b/n in the next 13 p., 3 tbsp. b/n in the last paragraph, art. b/n in the last st., to raise the circle v.p. don't do it.
2nd row: 2 tbsp. b/n in the next 2 p., 12 tbsp. b/n, 2 tbsp. b/n in the next 3 p., 13 tbsp. b/n, 2 tbsp. b/n in the next paragraph.
3rd row: 2 tbsp. b/n in the next 3 p., 16 tbsp. b/n, 2 tbsp. b/n in the next 3 p., 16 tbsp. b/n
4th row: (2 tbsp. b/n in the next st, tbsp. b/n in the next st.) - twice, 2 tbsp. b/n in the next paragraph, 17 tbsp. b/n, (2 tbsp. b/n in the next p., tbsp. b/n in the next p.) - twice, 2 tbsp. b/n in the next paragraph, 17 tbsp. b/n.
Row 5: st. b/n, (2 tbsp. b/n in the next p., tbsp. b/n in the next p.) - 3 times, 2 tbsp. b/n in the next paragraph, 18 tbsp. b/n, (2 tbsp. b/n in the next p., tbsp. b/n in the next p.) - 3 times, 2 tbsp. b/n in the next paragraph, 17 tbsp. b/n. Cut out 3 ovals of the appropriate diameter from cardboard or plastic. Glue it.
Row 6: st. b/n, (2 tbsp. b/n in the next p., 1 tbsp. b/n in the next 2 p.) - 3 times, 2 tbsp. b/n in the next paragraph, 19 tbsp. b/n, (2 tbsp. b/n in the next p., 1 tbsp. b/n in the next 2 p.) - 3 times, 2 tbsp. b/n in the next paragraph, 17 tbsp. b/n, art. b/n in each of the 2 initial sts of this row, half st. b/n in the next paragraph.
Row 7: Knit behind the back wall of the loop, ch 1, st. b/n in each st., connect half st. b/n.
8th row: Knit behind the back wall of the loop, ch 2, st. s/n in the next st., (knit 2 sts together using a st. s/n) - repeat until the end of the row, connect half st. b/n. Fasten the thread.
Border: Knit as a border for a dining table.
Glue the table leg to the top.
coffee table
Central base (bottom of the leg)
1st row: 2 vp, 6 st. b/n in the 2nd st. from the hook, close into a ring using a half stitch. b/n
2nd row: 1 vp, 2 tbsp. b/n in each st., connect half st. b/n (12 tbsp.) Cut out 2 circles of suitable diameter from cardboard or plastic.
3rd row: Knit behind the back wall of the loop. 2 ch, half st. s/n in each st., connect half st. b/n.
4 - 5 row: 2 ch, half st. s/n in each st., connect half st. b/n.
Row 6: Knit behind the back wall of the loop. 1 vp, art. b/n in each st., connect half st. b/n. (12 tbsp.)
Row 7: Knit behind the back wall of the loop. 2 ch, half st. s/n in each st., connect half st. b/n.
8 - 9 row: 2 ch, half st. s/n in each st., connect half st. b/n. Fasten the thread.
"Skirt"
1st row: Attach the thread to the 6th row using a half stitch. b/n, 3 v.p., art. s/n in the same paragraph, 2 tbsp. s/n in each st., connect.
2nd row: ch 3, raised stitch. s/n around the next st., (raised purl st. s/n around the next st., raised front st. s/n around the next st.) - 11 times, connect.
Row 3: ch 1, st. b/n in the same st., (skip st., 5 st. s/n in the next st., skip st., st. b/n in the next st.) - repeat to the end of the row, join half st. b/n. Fasten the thread.
Ball
1st row: Attach the thread to the 6th row using a half stitch. b/n, 3 v.p., art. s/n in the same paragraph, 2 tbsp. s/n in each st., connect half st. b/n.
2-3 row: 1 vp, embossed front st. s/n around the next st., ch 2, (raised front st. s/n around the next st.) - 23 times, join half stitch. b/n.
4th row: ch 2, raised stitch. s/n around the next st., (knit 2 sts together using a raised knit st. s/n) - 11 times, connect half st. b/n in the 1st relief art.
Row 5: using half stitch. b/n connect the last row of the ball and the top of the bottom of the leg.
Row 6: ch 3, st. s/n behind the back wall of the loop in each st. of the previous row, connect half st. b/
7th row: half st. b/n in each stitch of the previous row, connect. Fasten the thread.
Top of the leg
Cast on 2 vp, 6 st. b/n in the 2nd st. from the hook, 2 tbsp. b/n in the next 6 p.
Place 1 small cardboard circle on the bottom of the leg, fill the leg with filler (beans), then fill the entire leg with padding polyester. Cover the top with another cardboard circle, place the top of the leg on it and connect using a half-strip. b/n.
Top of the table
Rows 1 - 7: repeat the first 7 rows of the Dining Table. Cut a circle of the appropriate diameter from cardboard or plastic.
Row 8: (6 tbsp. b/n, 2 tbsp. b/n in the next st.) - repeat 6 times. (48 st.)
9th row: half st. b/n in the next paragraph, ch 1, 42 st. b/n behind the back wall of the loop, connect the half st. b/n in the 1st article. b/n.
Row 10: half st. b/n behind the back wall of the loop in each stitch of the previous row.
Border
Using an F hook (3.75mm), attach the thread to the 14th row of the table top.
3 v.p., art. s/n around semist. b/n of the previous row, (skip 2p., st. b/n in the next st., 3v.p., st. s/n around st. b/n) - repeat until the end of the row, connect half st. b/n. Fasten the thread.
Insert a cardboard circle, mark its middle and glue the table leg to it.
Sofa canape.
Base (top)
1st row: cast on with white thread 25 vp, 3 tbsp. s/n in the 4th p. from the hook, 1 tbsp. s/n in the next 20 p., 7 tbsp. s/n in the last paragraph, 20 tbsp. s/n s reverse side set row, 3 tbsp. s/n in the same paragraph as the initial 3 sts. s/n, connect half st. b/n (54 st.).
2nd row: 3 vp, 2 tbsp. s/n in the next 3 p., 20 tbsp. s/n, 2 tbsp. s/n in the next 7 p., 20 st. s/n, 2 tbsp. s/n in the next 3 p., art. s/n in the same p. as 3 v.p. lifting, connect the half-st. b/n (68 items)
3rd row: 3 ch, (2 st. s/n in the next p., st. s/n in the next p.) - 4 times, 17 tbsp. s/n, (2 tbsp. s/n in the next paragraph, treble s/n in the next paragraph) - 8 times, 17 tbsp. s/n, (2 tbsp. s/n in the next st., tbsp. s/n in the next st.) - 4 times, join half st. b/n. Place the base on cardboard or plastic, draw along the contours, cut the cardboard base 3mm larger than the knitted part.
Side
4th row: Knit behind the back wall of the loop. 2 ch, half st. s/n in each st. of the previous row, connect half st. b/n. (84 st.)
5 - 9 row: 2 ch, half st. s/n in each st., connect half st. b/n. Fasten the thread.
Base (bottom)
Repeat 1 - 3 rows of the upper part of the base, only instead of st. s/n in 2 - 3 rows knit half st. s/n. Fasten the thread.
Cut out a corresponding piece from cardboard and sew it to the base.
Assembly
Connect the upper and lower parts of the base together, put cardboard on the upper part, fill it with padding polyester, and sew it together.
"Skirt"
1st row: Mark the center of the side part, retreat 18 sts, attach the thread to the 18th st. b/n. Knit a row behind the back wall of the loop. 4 tbsp. s/n, (2 tbsp. s/n in the next paragraph, 3 tbsp. s/n) - repeat 18 times, 1 tbsp. s/n in the next 2 stitches, leave the remaining stitches unknitted, 3 ch, turn.
2 - 4 row: (raised purl st. s/n around the next st., raised front st. s/n around the next st.) - repeat until the end of the row, in the last 2 sts knit like this: raised purl st. s/n around the next paragraph, art. s/n in the next st., ch 3, turn. At the end of the 4th row, ch 1. rise instead of 3.
Row 5: st. s/n in the next st., (skip the next st., 5 st. s/n in the next st., skip the next st., st. b/n in the next st.) - repeat until the end of the row, join half st. b/n. Fasten the thread.
Back
Repeat rows 1 - 4 of the center back of the chair.
Knit 4 armrests, like a chair. Sew 2 armrests as shown in the photo.
Sew the back to the sofa, sew the remaining 2 armrests in the same way as on the chair.
Cushion
1st row: with a light green thread, cast on 25 vp, 5 tbsp. s/n in the 4th p. from the hook, 1 tbsp. s/n in the next 20 p., 6 tbsp. s/n in the last paragraph, 20 tbsp. s/n on the back side of the typesetting row, connect the half st. b/n.
2nd row: ch 3, raised stitch. s/n around these 3 v.p., (st. s/n in the next st., embossed front st. s/n around the same st.) - 5 times, embossed front st. s/n around each of the next 20 p., (st. s/n in the next p., raised front st. s/n around the same p.) - 6 times, embossed front st. s/n around each of the next 20 sts, join half stitches. b/n.
3rd row: ch 1, raised stitch. b/n around 3 v.p. previous row, 2 vp, st. s/n in the next st., embossed front st. s/n around the same st., (relief front st. s/n around the next st., st. s/n in the next st., embossed front st. s/n around the same st) - 5 times, embossed front Art. s/n around each of the next 20 p., (raised front st. s/n around the next p., st. s/n in the next p., raised front st. s/n around the same st) - 6 times, embossed front st. s/n around each of the next 20 sts, join half stitches. b/n.
Row 4: ch 1, st. b/n in each st. of the previous row, connect half st. b/n in the first st. b/n.
Row 5: Attach pink thread, knit half st. b/n in each stitch of the previous row. Fasten the thread.
6th row: knit with light green thread behind pink sts, ch 1, st. b/n in each st., connect half st. b/n in the first st. b/n. (42 st.)
Row 7: Attach pink thread, knit half st. b/n in each stitch of the previous row. Fasten the thread.
Row 8: Using a light green thread, knit behind the back wall of the stitch behind the pink loops. 3 v.p., art. s/n in the next st., knit 2 sts. together using art. s/n, (2 tbsp. s/n, knit 2 sts together) - 4 times, 15 tbsp. s/n, 2 p. knit together, (2 tbsp. s/n, 2 p. knit together) - 5 times, 17 tbsp. s/n, knit 2 sts together, connect half st. b/n. Fasten the thread.
Center of the bottom of the pillow
1st row: repeat 1st row of pillow.
2nd row: 1 vp, 2 tbsp. b/n in the next 5 p., 20 tbsp. b/n, 2 tbsp. b/n in the next 6 p., 20 tbsp. b/n, 2 tbsp. b/n in the last st. Fasten the thread. Sew the bottom to the top.
Button (3 pcs.)
Knit with pink yarn in the same way as for the chair. Sew to the pillow.
Armchair.
Base (leg)
1st row: with a white thread, cast on 2 vp, 6 tbsp. b/n in the 2nd st. from the hook, close into a ring using a half stitch. b/n.
2nd row: 1 vp, 2 tbsp. b/n in each st., connect half st. b/n (12 tbsp.)
3rd row: 3 vp, st. s/n in the same paragraph, 2 tbsp. s/n in each st., connect half st. b/n (24 items)
4th row: 3 vp, 2 tbsp. s/n in the next st., (st. s/n in the next st., 2 tbsp. s/n in the next st.) - repeat to the end of the row, connect half st. b/n. (36 tbsp.) Cut out 2 circles of the appropriate diameter from cardboard or plastic.
Row 5: knit behind the back wall of the loop, ch 2, half st. s/n in each st. of the previous row, connect half st. b/n. (36 st.)
6 - 10 row: 2 ch, half st. s/n in each st. of the previous row, connect half st. b/n. (36st.)
Row 11: knit behind the back wall of the loop, ch 3, st. s/n in each st. of the previous row, connect half st. b/n. (36 st.)
Insert one cardboard circle inside the base, pour filler onto it? volume of the base (white beans, for example) for stability, fill the remaining space with padding polyester, put a second cardboard circle.
Row 12: ch 2, (skip 1 st, treble s/n in next st) - repeat to the end of the row, connect.
"Skirt" for the base
1st row: join the thread to the 10th row of the warp, knit half st. b/n along the entire row, connect (36 stitches)
2nd row: knit behind the back wall of the loop, 3 ch, st. s/n in the same st., (3 tbsp. s/n, 2 tbsp. s/n in the next st.) - repeat 8 times, tbsp. s/n, leave 2p. not knitted, ch 3, turn. (43 st.)
Rows 3 - 5: (raised purl st. s/n in the next st., raised knit st. s/n in the next st.) - repeat until the end of the row, ch 1, turn.
Row 6: st. b/n in the same st., (skip the next st., 5 st. s/n in the next st., skip the next st., st. b/n in the next st.) - repeat until the end of the row. Fasten the thread.
Chair back - middle (2 pcs.)
(3 vp, treble s/n in the 3rd st from the hook) - 7 times, 1 vp, 3 tbsp. b/n in the first “loop”, 5 tbsp. b/n in each of the next 5 “loops”, 11 tbsp. b/n in the next “loop”, 5 tbsp. b/n in each of the next 5 “loops”, 3 tbsp. b/n in the last “loop”. Fasten the thread.
1st row: connect the two parts of the middle of the back and tie them together in half stitch. b/n without skipping a single stitch. Fasten the thread (67 stitches)
2nd row: from the beginning of the first row, skip a stitch, join the thread to the next st. using half st. b/n (this should be the middle of the 5th “loop”) ch 2, skip 4 sts, st. s/n in the next paragraph, 2 vp, art. s/n in the same p., skip 3 p., st. s/n in the next paragraph, 2 vp, art. s/n in the same paragraph, skip the next paragraph, art. with 2/n in the next paragraph, 2 vp, art. with 2/n in the same st., skip the next st., st. with 2/n in the next st. (must be the middle of the central “loop”), (2 ch, dc with 2/n in the same st.) - repeat twice, 2 ch, skip next st. , art. with 2/n in the next paragraph, 2 vp, art. with 2/n in the same st., skip the next st., st. s/n in the next paragraph, 2 vp, art. s/n in the same p., skip 3 p., st. s/n in the next paragraph, 2 vp, art. s/n in the same p., v. 2, skip 4 p., half st. b/n. Fasten the thread.
3rd row: attach the thread to the beginning of the 2nd row and knit half st. b/n for the back st. p. in each st. and in each v.p. previous row. Fasten the thread.
4th row: attach the thread to the beginning of the 1st row using st. b/n, knit st. b/n behind the back wall of the next 19 sts, art. b/n for the back st.p. in half a century b/n 2nd row, skip next 2 p., art. s/n in the next p., (1 vp, st. s/n in the same p.) - repeat twice, skip 2 p., st. b/n in the next paragraph, skip paragraph, art. s/n in the next p., (1 vp, st. s/n in the same p.) - repeat twice, skip 2 p., st. b/n in the next p., skip 2 p., st. with 2/n in the next p., (1 ch, st. with 2/n in the same p.) - repeat 4 times, skip 2 p., st. with 2/n in the next p., (1 ch, st. with 2/n in the same p.) - repeat 2 times, skip 2 p., st. with 2/n in the next st. (top of the back of the chair), (1 ch, st. with 2/n in the same st.) - repeat 2 times, skip 2 sts, st. with 2/n in the next st., (1 ch, st. with 2/n in the same st.) - repeat 4 times, skip 3 sts, st. b/n in the next p., skip 2 p., st. s/n in the next p., (1 ch, st. s/n in the same p.) - repeat twice, skip p., st. b/n in the next p., skip 2 p., st. s/n in the next p., (1 vp, st. s/n in the same p.) - repeat twice, skip the last p. of the 3rd row, st. b/n in the next paragraph of the 1st row, art. b/n for the back st. p. in the remaining sts of the 1st row. Fasten the thread.
Insert a plastic straw between the two pieces in the middle of the chair. Attach the chair back to the back of the chair base and sew. Sew the edges of the “skirt” to the back of the chair. Lightly starch the back of the chair and let it dry.
Armrests (2 pcs.)
You need two 30cm long plastic straws for each armrest to reinforce the shape.
(For miniature furniture, you need to take one straw for each armrest)
Row 1: ch 2, st. b/n in the 2nd st from the hook, ch 1, turn.
2nd row: knit the next rows behind the back stack of the loop. 2 tbsp. b/n in Art. b/n of the previous row, ch 1, turn.
3 - 5 row: 2 tbsp. b/n, 1 vp, turn
Row 6: 1 tbsp. b/n, 2 tbsp. b/n in the next st., ch 1, turn.
7 - 8 row: 3 tbsp. b/n, 1 vp, turn.
Row 9: 2 tbsp. b/n, 2 tbsp. b/n in the next st., ch 1, turn.
10 - 11 row: 4 tbsp. b/n, 1 vp, turn.
Row 12: 3 tbsp. b/n, 2 tbsp. b/n in the next p, ch 1, turn.
13 - 14 row: 5 tbsp. b/n, 1 vp, turn.
Row 15: 4 tbsp. b/n, 2 tbsp. b/n in the next st., ch 1, turn.
16 - 17 row: 6 tbsp. b/n, 1 vp, turn.
Row 18: 5 tbsp. b/n, 2 tbsp. b/n in the next st., ch 1, turn.
19 - 20 row: 7 tbsp. b/n, 1 vp, turn.
21 row: 6 tbsp. b/n, 2 tbsp. b/n in the next st., (mark the front side with a pin), ch 1, turn.
22 - 35 row: 8 tbsp. b/n, 1 vp, turn.
Top: remove the pin, then knit along the lower left side: st. b/n at the base of the last art. b/n, (1 ch, dc in the space between 2 rows) - repeat along the entire side. In the last st. knit like this: (1 ch, st. b/n, 1 ch, st. b/n)
1 vp, art. b/n in the first stitch of the opposite side, (1 ch, dc in the space between 2 rows) - repeat until the end of this side, connect half st. b/n in the first st. b/n last row.
Connect both parts of the armrest, insert a plastic straw or wire inside, bend it as in the photo, sew it to the chair and starch it hard.
Pillow
1st row: with a white thread, cast on 4 vp, close in a ring, 3 vp, 13 st. s/n in the center of the ring, connect half stitch. b/n (14 tbsp.)
2nd row: ch 3, raised stitch. s/n around the typed 3 vp., (st. s/n in the next st., raised front st. s/n around this st.) - repeat 13 times, connect half st. b/n.
3rd row: ch 3, raised stitch. s/n around the dialed 3 vp, embossed front st. s/n around the next st., (stitch s/n in the next st., raised front st. s/n around this st., raised front st. s/n in the next st.) - repeat 13 times, connect half stitch . b/n. (42 st.)
4th row: attach a light green thread, knit half st. b/n in each st. fasten the thread.
Row 5: Knit with pink thread behind light green half stitches. b/n. Art. b/n in each paragraph (42 st.)
6th row: attach a light green thread, knit half st. b/n in each st. fasten the thread.
Row 7: Knit with pink thread behind light green half stitches. b/n. 3 ch, knit 2 sts together using st. s/n, (st. s/n in the next st., knit 2 sts together) - repeat until the end of the row, connect half stitch. b/n
8th row: 2 ch, (knit 2 stitches together using treble s/n) - repeat until the end of the row, connect half stitch. b/n. Fasten the thread. Fill the pillow with padding polyester
Button
Using a light green thread, cast on 2 ch. (this should leave a long tail), 6 tbsp. b/n in the 2nd st. from the hook, connect half st. b/n. Fasten the thread and leave a long tail. Pull the tails through the back wall of each loop of the last row, pull the thread as tight as possible, tie the tails together. Pull them out from the middle of the bottom side of the pillow and secure.
Translation
Job Description
Cover
Size - 5" x 8" (13 cm x 20 cm)
You will need:
* cotton thread No. 10:
o 60 yards (55 m) ecru;
o 20 yards (18 m) pink;
* hook No. 7 (1.65 mm).
Track (3 pcs)
Start working with an ecru thread with a chain of 8 chain stitches closed in a ring.
1st row: 3 chain stitches, (3 chain stitches, 3 chain stitches, 4 chain stitches) in a ring, turn.
2nd row: 3 ch, (3 dc, 3 ch, 3 dc) in an arch of 3 ch, st. with nak. to the top of the lifting chain of the previous row, turn.
Rows 3-20: repeat row 3.
21 row: 3 ch, (3 chain stitches, 5 chain stitches, 3 chain stitches) in an arch of 3 chain stitches, st. with nak. to the top of the lifting chain of the previous row. Break the thread.
Row 22: work is carried out around the perimeter of the part with pink thread. Attach the thread using st. without nac. to the edge of the 21st row, in the arch formed by the last st. with nak., 2 tbsp. without nac. in the same arch, continue knitting along the side. Knit 3 tbsp. without nac. to the edge of each row up to 1 row, 3 tbsp. without nac. to the edge of the first row, 8 tbsp. without nac. in a ring, 3 tbsp. without nac. to the opposite edge of 1 row and 3 tbsp. without nac. to the edge of each row along the long side of the track, 3 tbsp. without nac. to the edge of 21 rows, 1 tbsp. without nac. in every st. with nak., 8 tbsp. with nak., in an arch of 5 vp, 1 tbsp. without nac. in every st. with nac., close the row into a ring and break the thread.
Row 23: join ecru thread using st. without nac. to the break point of the thread of the previous row, *skip the trace. 2 tbsp., (dc., 1 v.p.) in the next. Art., Art. with nak. in the same article, skip the next line. 2 tbsp., tbsp. without nac. next st.* Repeat from * to * until the opposite edge of the track is reached, knit from * to * in 8 sts of the rounded edge of the track, skipping not 2 ch at a time, but one at a time. Knit the rest of the row in the same way. Close the row into a ring.
Finishing work
Leave 3 shells unused on the curves at each end of the path. Attach the pink thread using st. without nac. in the first st. first track, ch 5, skip next. shell, art. without nac. next Art. Repeat from * 9 more times. Break the thread.
Place a second track nearby. Make sure that the direction of knitting the tracks coincides.
Leave 3 shells unused on the fillets at each end of the second path. Attach the pink thread using st. without nac. in the first st. paths. *2 vp, st. without nac. into the adjacent arch of the first track, ch 2, skip the next line. shell, art. without nac. next Art. second track. Repeat from * 9 more times. Break the thread.
Connect the second and third tracks in the same way.
Newspaper basket.
You will need:
* some thick light brown yarn (200 m/100 g);
* hook H/8 (4.75-5 mm).
Basket
1st row (circular): start knitting with a chain of 7 vp, 2 tbsp. without nac. 2 p. from the hook, 1 tbsp. without nac. next 4 tbsp, 3 tbsp. without nac. in the last st. Continue working on the unknitted half-loops of the initial chain, st. without nac. next 5 p., close the row into a ring. (14)
2nd row (circular): 1 vp, 2 tbsp. without nac. in the first 2 tbsp., 1 tbsp. without nac. next 4 tbsp., 2 tbsp. without nac. next 3 tbsp., 1 tbsp. without nac. next 4 tbsp, 2 tbsp. without nac. in the last stitch, close the row into a ring. (20)
3rd row (circular): work is carried out in the rear half-loops of the previous row. 3 v.p., art. without nac. in each st., close the row into a ring.
4-5 row (circular): front st. without nac. around the chain of lifting the previous row, ch 2, knit stitch. with nak. around each stitch, close the row into a ring.
Row 6 (circular): tie the piece in a circle in a crab step and close the row into a ring. Break the thread.
Round pillow
Size - 1 1/2" (approx. 4 cm) in diameter
You will need:
* 25 yards (23 m) of #10 cotton thread, pink;
* sewing needles;
* hook No. 7 (1.65 mm).
Pillow (2 children)
Start knitting with yellow yarn with a chain of 4 ch. Close it in a ring.
1st row (circular): 3 ch. lifting, 11 tbsp. with nak. to the center of the ring. (12)
2nd row (circular): 3 v.p. lifting, facial st. with nak. around the lifting loops of the previous row. (st. with nac., front st. with nac. around the same st.) to the end of the row. (24)
3rd row (circular): 3 v.p. rise, st. with nak. in the next stitch, knit stitch. with nak. around the same station (knit stitch around the next stitch, double stitch in the next stitch, knit stitch around the same stitch) to the end of the row. (36)
4th row (circular): 1 v.p. rise. facial st. without nac. around the lifting loops of the previous row. 2 v.p. facial st. with nak. in every st. previous row. Connect half st. to the top of the chain of 2 vp. Break the thread.
Place both pieces right sides together and tie the pillow half-stitch. without nac. Work is carried out on the rear half-loops of both parts.
Tie a button. To do this, make a sliding ring, leaving a long tail for sewing. 1 ch, 10 st. without nak into the sliding ring, pull the tail to tighten the ring, half-st. in the first st. without nac. Break the thread. Sew a button to the pillow with a long tail, and sew through it. Hide the ends.
Square pillow
Size - square with side 2" (5 cm)
You will need:
* cotton thread No. 10:
o 25 yards (23 m) pink;
o 10 yards (9 m) green;
* polyester filler for stuffing;
* sewing needles;
* hook No. 7 (1.65 mm).
Pillow (2 children)
Start knitting with green yarn with a chain of 17 ch.
1st row: st. without nac. 2 stitches from the hook. Art. with nak. in the next st., (st. without nak., st. with nak.) until the end of the row.
2nd row: 1 v.p. rise. (single stitch in double stitch from the previous row, double stitch in single stitch from the previous row.) until the end of the row
Repeat row 2 until the piece is square.
Place both pieces with the wrong sides together and tie around the perimeter with pink thread:
1st row: knit st. without nak in each st., 1 tbsp. without nac. to the side of art. without nac., 2 tbsp. without nac. to the side of art. with nak. and 2 tbsp. without nac. into the corners of the pillow. Close the row into a ring.
Row 2: st. without nac. in each st., 2 tbsp. without nac. in the corner of the pillow. Close it in a ring. Break the thread.
Make a pink button for the square pillow, just like for the round one, and sew it on.
Carpet
Size - 16 1/2" x 24" (42 cm x 51 cm)
You will need:
* thick yarn (200 m/100g)
o 4 oz (113.4 g) dark green;
o 3 1/2 oz (100 g) blue-green;
o 1 ounce (28.4 g) white;
o 1/2 ounce (14.2 g) each pink and turquoise;
* hooks G/6 (4.25-4.5 mm) and H/8 (4.75-5 mm).
Knitting density
*Crochet H: 7 stitches. x 4 rows of pattern = 2" x 1 1/2" (5 cm x 3.8 cm)
*Crochet G: 4 tbsp. without nac. x 4 rows = 1" x 1" (2.54 cm x 2.54 cm)
Central part
Start crochet H using blue-green thread with a chain of 31 chain stitches.
1st row: st. without nac. 2 p. from the hook, st. with nak. next st., (st. without nak. in the next st., st. with nak. in the next st.) to the end of the row, turn. (15 tbsp. with nak. and 15 tbsp. without nak.)
2nd row: 1 ch, (single stitch in the next single stitch, single chain stitch in the next single stitch) to the end of the row, turn.
Rows 3-46: repeat row 2. After row 46, do not turn.
Row 47 (circular): loosely tie the part around the perimeter of the half st. without nac. At the same time, knit 1 half st. without nac. in every st. and in each st., 1 half st. without nac. to the edge of the station without nac., 2 half tbsp. without nac. to the edge of the station with nak. Make arches in the corners of the part, 1 vp each. Close the row into a ring and break the thread.
Border
For the best appearance rows should be knitted in such a way that the connection Art. were in different places in relation to other rows.
1st row (circular): work around the perimeter in the back half loops with hook G. Attach the white thread using st. without nac. at any half-hour without nac. Knit st. without nac. in every st. and 3 tbsp. without nac. in each arch from 1 ch. Close the row into a ring.
2-3 row (circular): work is carried out in both half-loops of the previous row. 1 vp, art. without nac. in every st. and 3 tbsp. without nac. to the central station corner. Close the row into a ring.
4th row (circular): attach pink thread using st. without nac. in any station 3 rows. Knit st. without nac. in every st. and 3 tbsp. without nac. to the central station corner. Close the row into a ring. Break the thread. Turn.
Row 5 (circular): repeat row 4 with turquoise thread.
Row 6 (circular): attach a dark green thread using a st. without nac. in any station 3 rows. Knit st. without nac. in every st. and 3 tbsp. without nac. to the central station corner. Close the row into a ring.
Row 7 (circular): attention, before starting the row it is recommended to calculate the placement of the shells and, if necessary, transfer the thread using a half stitch. without nac. in a suitable place to start a series of sts. You can also make 2 tbsp gaps before knitting the corner shell. instead of one. 3 vp, 2 tbsp. with nak. in the same st., skip 1 st., st. without nac. next st., *(skip next st., shell:, skip next st., single st. in next st.) to the corner. Skip next. tbsp., 5 tbsp. with nak. in the corner st., skip the trace. Art., Art. without nac. next Art. Repeat from * to the end of the row. Close the row into a ring. Turn.
Row 8: knitting is turned wrong side. Polust. without nac. next st., 3 ch, 2 tbsp. with nak. in the same st., *(st. without nak. in 2 st. next shells, shell in next st.) repeat until the corner shell. (st. without nak. in 2 tbsp. corner shells, 5 tbsp. with nak. in the 3rd st., tbsp. without nak. in the 4th st.), shell in the next. Art. Repeat from * to the end of the row. Close the row into a ring, turn.
Row 9: knitting is turned with the front side. Repeat row 8.
Row 10: knitting is turned wrong side. Repeat row 8.
11th row: knitting is turned with the front side. Repeat row 8.
Coffee table (2 pcs)
Size - lid diameter about 3 1/2" (approx. 9 cm)
You will need:
* 3 oz (85 g) thick dark brown yarn (200 m/100 g);
* postcard or plastic cover from margarine;
* hot glue;
* sewing needles;
* hook H/8 (4.75-5 mm).
Knitting density
table cover
1st row (circular): start knitting with a chain of 2 ch, 6 tbsp. without nac. in 2 sts of the chain. Mark the first st. row, because knitting goes in a spiral. (6)
2nd row (circular): 2 tbsp. without nac. in every st. (12)
3rd row (circular): (single stitch in the next st., 2 single stitches in the next st.) to the end of the row. (18)
4th row (circular): (1 single stitch in the next 2 stitches, 2 single stitches in the next stitch) until the end of the row. (24)
Row 5 (circular): (1 single stitch in the next 3 stitches, 2 single stitches in the next stitch) until the end of the row. (30)
Row 6 (circular): (1 single stitch in the next 4 stitches, 2 single stitches in the next stitch) until the end of the row. (36)
Row 7 (circular): (1 single stitch in the next 5 stitches, 2 single stitches in the next stitch) until the end of the row. Close the row into a ring. (42) Using the knitted piece as a template, cut out a circle from postcard or plastic.
Row 8 (circular): work is done in the rear half loops. 1 vp, art. without nac. in each st., close the row into a ring in the first st. row.
Row 9 (circular): work is done in the rear half loops. 1 ch, half st. with nak. in the next st., (knit the next 2 sts. together with a half st., skip the next st.) until the end of the row, close the row into a ring in the first half st. with nak. and break the thread.
Turn the lid with the right side facing you and knit along the left front half-loops of row 7. Attach the thread half-st. without nac. in any stitch and knit half st. without nac. in every st. Process the remaining front half loops of row 8 in the same way. Insert the cut circle inside.
Stand
Start knitting with a chain of 11 chain stitches.
1st row: st. without nac. in 2 sts from the hook and then 1 st. without nac. in each paragraph (10)
2-96 row: work is carried out in the rear half loops 1 ch, st. without nac. in every st. Turn.
Starting from row 1, roll the resulting part into a roll. Knit a row of half stitches. without nak., at the same time knitting loops in art. of the last row and into the left front half-loops of the row opposite after twisting the part.
Glue one edge of the stand to the underside of the table top.
The second table is knitted similarly.
Lamp (2 pcs)
Size - 4 1/2" (11.5 cm) high.
You will need:
* some thick pink and white yarn (200 m/100 g);
* a little finer white yarn (250 m/100 g);
* corn grains or any not very small rounded grain;
* hooks 0 (3.25 mm) and F/5 (3.75-4 mm).
Knitting density
Crochet F and thick yarn: 9 tbsp. without nac. x 9 rows = 2" x 2" (5 cm x 5 cm)
Crochet 0 and thinner yarn: 11 tbsp. without nac. x 6 rows st. without nak., knitted in back half loops = 2" x 1" (5 cm x 2.54 cm)
Base
1st row (in the round): start knitting with pink yarn in crochet F with a chain of 2 ch, 6 tbsp. without nac. in 2 sts of the chain. Mark the first st. row, because knitting goes in a spiral. (6)
2nd row (circular): 2 tbsp. without nac. in each st., close the row into a ring. (12)
3rd row (circular): work is carried out in the rear half-loops of the previous row. 1 vp, art. without nac. in the first a., 2 tbsp. without nac. next p., (s.c. in the next p., 2 tbsp. in the next p.) until the end of the row. Continue knitting in a spiral. (18)
4th row (circular): Skip 1 ch, st. without nac. in every st.
Row 5 (circular): (1 single stitch in the next 2 stitches, 2 single stitches in the next stitch) until the end of the row. (24)
6-8 row (circular): st. without nac. in every st.
Row 9 (circular): (single stitch in next stitch, knit next 2 stitches together without chain stitch) to the end of the row. (26)
Row 10 (circular): (single stitch in the next st., knit the next 2 sts together with a single stitch) 5 times, st. without nac. next Art. (11)
11-13 row (circular): st. without nac. in every st. After the last row, close the row into a ring and break the thread. Stuff the part with cereal.
Row 14 (in the round): Continue knitting with white thick yarn in the back half loops. Attach the thread using st. without nac. in the first st., st. without nac. in every st. The work continues in a spiral. (11)
Row 15 (circular): 2 tbsp. without nac. in every st. (22)
16-18 row (circular): st. without nac. in every st.
Row 19 (circular): (knit 2 stitches together in single stitches) to the end of the row. (11)
Row 20 (circular): st. without nac. in each st., close the row into a ring. Break the thread, leaving a long tail. Add grain to the part. Pass the tail through the top edge of the part and pull it tightly. Hide the tip.
Work along the unknitted front half loops of 2 rows of the piece with crochet A using pink yarn. Attach the thread using a half stitch. without nac. in any point 1 ch, and knit in a crab step. Close the row into a ring and break the thread.
Shade
Please note that the finished lampshade should be placed around the white part of the base of the lamp, and it will be held in place by “tightening”. Therefore, before finishing the work, you should make sure that the part will not fit too tightly, but will not fall off either.
Start knitting with thinner white threads in crochet 0 from a chain of 15 ch.
1st row: st. without nac. in 2 sts from the hook and then 1 st. without nac. in each paragraph (14)
2-38 row: work is carried out in the rear half loops 1 ch, st. without nac. in every st. Turn.
Row 39: fold the piece in half, and connect the piece into a ring next to the half stitch. without nak., knitting half st. simultaneously into the corresponding loop of the initial chain and the back half-loop of the last row. When finished, break the thread and turn the part inside out so that the “seam” is inside
Place the lampshade on the white part of the base.
The second lamp is knitted similarly.
Sofa
Size - 10 1/2" (approx. 27 cm) in length.
You will need:
* two pieces of foam rubber (polypropylene foam or, at worst, foam rubber - translator's note) measuring 3" x 8" (7.5 x 20 cm) with a thickness of 1/2" and 1" (1.3 cm and 2.5 cm);
* sewing needles;
* hook H/8 (4.75-5 mm).
Knitting density
* 4 tbsp. without nac. = 1" (2.54 cm)
* 4 rows st. without nac. = 1" (2.54 cm)
* 9 rows st. without nak., knitted in the back half loops = 2" (5 cm)
Sofa base
Rows 4-36: repeat rows 2-3 alternately. Break the thread.
Sidewalls of the base.
Sew the base according to the diagram. Insert a 1" thick piece of foam rubber inside.
Back
2-122 row: work is carried out in the rear half-loops. 1 vp, 1 tbsp. without nac. in each stitch, turn. When finished, break the thread.
Pillow (2 pcs.)
Cut a piece of 1/2" thick foam rubber into two 3" x 4 pieces. Insert the foam rubber into the cushions and sew up the open ends with long tails.
Finishing work.
Wrap the back around the base so that at the front corners of the base there are back ribs formed by the front half-loops of the row. Sew the back to the base along the perimeter of the base as shown in the picture. Fold the back pieces left at the front back and sew the first and last rows of the back together.
Put down pillows.
Armchair (2 pcs)
Size - 5" (approx. 12.5 cm) in length.
You will need:
* 7 oz (200 g) chunky turquoise yarn; (200 m/100 g);
* sewing needles;
* hook H/8 (4.75-5 mm).
Knitting density
* 4 tbsp. without nac. = 1" (2.54 cm)
* 4 rows st. without nac. = 1" (2.54 cm)
* 9 rows st. without nak., knitted in the back half loops = 2" (5 cm)
Chair base
Before starting knitting, it is recommended to study the pattern of the base of the sofa; knitting is done from the bottom up, the sides are tied separately after finishing the work of the main part.
Start knitting with a chain of 32 vp.
1st row: st. without nac. 2 p. from the hook, 1 tbsp. without nac. next 4 p., 1 vp., skip 1 p., 1 tbsp. without nac. next 9 p., 1 vp., skip 1 p., 1 st. without nac. next 5 sts, ch 1, skip next. p., 1 tbsp. without nac. next 9 p., turn. (28 st., 3 v.p.)
2nd row: knit in both half loops. 1 ch, 1 tbsp. without nac. in the first 9 stitches, ch 1, skip next. p., knit 1 tbsp in the back half loops. without nac. next 5 sts., ch 1, skip next. p., knit 1 tbsp in both half-loops. without nac. next 9 sts., ch 1, skip next. p., 1 tbsp. without nac. next 5 tbsp, turn.
3rd row: knit in both half loops. 1 ch, 1 tbsp. without nac. in the first 5 stitches, ch 1, skip next. p., 1 tbsp. without nac. next 9 sts., ch 1, skip next. p., knit 1 tbsp in the back half loops. without nac. next 5 sts., ch 1, skip next. p., knit 1 tbsp in both half-loops. without nac. next 9 tbsp. turn.
Sidewalls of the base.
1st row: work is carried out in the left half loops of the initial chain in 5 sts of the front part of the base. (see knitting pattern). Attach the thread using st. without nac. in the first st. after the missing p., 1 tbsp. without nac. next Art., turn.
2-9 row: 1 vp, 1 st. without nac. in each stitch, turn. When finished, break the thread.
The second side is knitted in st. 36 rows. Repeat rows 1-9 of the first side panel.
Cut 1" thick foam rubber into two pieces measuring 3" x 3 1/2"
Sew the base according to the pattern ris2.jpg. Insert one of the resulting pieces inside.
Back
Start knitting with a chain of 25 vp.
1st row: st. without nac. 2 sts from the hook and then into each st, turn. (24)
2-82 row: work is carried out in the rear half-loops. 1 vp, 1 tbsp. without nac. in each stitch, turn. When finished, break the thread.
Pillow
Start knitting with a loose chain of 22 vp, closed in a ring. The chain should have a long tail.
Row 1 (circular): ch 1, st. without nac. in the first paragraph, 1 tbsp. without nac. in each stitch, close the row into a ring in the first stitch, turn. (22)
Rows 2-16 (circular): work is done in the rear half loops. 1 vp, 1 tbsp. without nac. in each stitch, turn. When finished, break the thread, leaving a long tail.
Cut a piece of 1/2" thick foam rubber into two 3" x 3 1/2 pieces. Insert the foam rubber into the cushions and sew up the open ends with long tails.
Finishing work.
Wrap the back around the base so that at the front corners of the base (see Fig. 3) there are back ribs formed by the front half-loops of the row. Sew the back to the base along the perimeter of the base as shown in the picture. Fold the back pieces left at the front back and sew the first and last rows of the back together.
Sew up the top and bottom of the back. Unscrew the top corners of the backrest by 1/2" (1.3 cm), unscrew it again. Secure them in this position. After that, unscrew the top part of the backrest about 1" (2.5 cm) and secure it in this position.
Put down pillows.
Ottoman (2 pcs)
Size - 3" x 3 1/2" (7.5 cm x 9 cm)
You will need:
* 6 1/2 oz (185 g) chunky turquoise yarn; (200 m/100 g);
* two pieces of foam rubber (polypropylene foam or, at worst, foam rubber - translator's note) measuring 3" x 7" (7.5 x 18 cm) with a thickness of 1/2" and 1" (1.3 cm and 2.5 cm);
* sewing needles;
* hook H/8 (4.75-5 mm).
Knitting density
* 4 tbsp. without nac. = 1" (2.54 cm)
* 4 rows st. without nac. = 1" (2.54 cm)
* 9 rows st. without nak., knitted in the back half loops = 2" (5 cm)
Ottoman
Before starting knitting, it is recommended to study the pattern of the ottoman; knitting proceeds from the bottom up, the sides are tied separately after finishing the work of the main part.
Start knitting with a chain of 34 vp.
1st row: st. without nac. 2 p. from the hook, 1 tbsp. without nac. next 21 p., 1 vp., skip 1 p., 1 st. without nac. next 10 p., turn. (32 stitches, 1 ch)
2nd row: knit in both half loops. 1 ch, 1 tbsp. without nac. in the first 10 stitches, ch 1, skip next. p., knit 1 tbsp in the back half loops. without nac. next 22 p., turn.
2nd row: knit in the back half loops. 1 ch, 1 tbsp. without nac. in the first 22 stitches, ch 1, skip next. p., knit 1 tbsp in both half-loops. without nac. next 10 tbsp. turn.
Rows 4-14: repeat rows 2-3 alternately. Break the thread.
Sidewalls of the base.
1st row: work is carried out in the left half loops of the initial chain in 5 sts of the front part of the base. (see knitting pattern). Attach the thread using st. without nac. in the first st. after the missing p., 1 tbsp. without nac. next Art., turn.
2-10 row: knit 1 ch in the back half loops, 1 tbsp. without nac. in each stitch, turn. When finished, break the thread.
The second side is knitted in st. 14 rows. Repeat rows 1-10 of the first side panel.
Cut foam rubber into 3" x 3 1/2" pieces. Fold the foam rubber so that the height of each of the two pieces is 1 1/2"
Sew the ottoman according to the diagram. Insert a piece of foam rubber 1 1/2" thick inside.
Make the second ottoman in the same way.
