How to make a sombrero from felt. DIY sombrero made of cardboard

The sombrero is an element of the national Mexican costume; it is a hat with a cone-shaped crown and wide, upturned brim. Even novice needlewomen can easily make this colorful headdress on their own. It is suitable for a costume party or a matinee in kindergarten, and if desired, the sombrero can also be worn in the countryside, because its large brim perfectly protects from the sun. Below is a detailed master class with step-by-step photographs of the process of making a sombrero quickly and easily with your own hands from scrap materials.

How to make a sombrero with your own hands from paper

This is the easiest way to make a headdress, since you do not need to glue the crown separately; it can be replaced with any object of a suitable shape.

• thick colored double-sided paper in bright colors;
• a flower pot made of lightweight plastic or a mayonnaise bucket;
• white and colored paint;
• brush;
• glue or double-sided tape;
• scissors;
• decorative elements: colored threads, cords and ribbons.

Work order.

Cover the flower pot with 1-2 layers of white paint and let it dry. Then we turn it over, put it on paper and trace it along the outline with a pencil. From the edge of the circle we set aside the required width of the margins and draw another circle. We cut out the part, make perpendicular cuts along the inner contour in increments of 1.5-2 cm. We carefully bend the resulting fringe upward.

We carefully bend the outer part of the fields upward, stepping back from the edge about 5 cm. We paint the pot, applying with a brush wide stripes of bright colors most loved by Mexicans: yellow, black, green and red. To ensure that the stripes are even, we make markings using tape and apply paint along its contours. To make the colors more vibrant, it is advisable to apply them in 2-3 layers with mandatory intermediate drying. Apply glue or double-sided tape with a high adhesion rate to the inner rim of the fields. Carefully place the inverted pot with dried paint on the margins, aligning its edges with the hole in the paper, and glue the resulting crown, pressing firmly over the entire surface.

We decorate the finished sombrero to your liking. The easiest way is to throw bright twisted silk cords with tassels over the crown and tie them in a knot. The embroidery on the margins looks very nice. To do this, we use a needle with thick threads of contrasting color to the fields. We embroider simple Mexican motifs: intersecting straight lines, diamond-shaped mesh, stripes, triangles and zigzags. The paper sombrero is ready!

Let's try to make our headdress out of cardboard

A more complex and very effective sombrero is made from cardboard. In this case, all its parts are cut out from the same material and glued together.

Required materials and equipment:

• thin yellow cardboard (double-sided);
• colored paper;
• PVA glue;
• pencil;
• scissors;
• thread and needle;
• compass, protractor, ruler.

Work order.

We measure the circumference of the head. We build a drawing on cardboard using a compass, ruler and protractor. An approximate drawing is shown in the diagram below, your dimensions may vary.

Carefully cut out all the details. We glue the crown (detail B in the diagram), while simultaneously bending the triangular flaps outward. We glue the bottom to the crown, then mount the crown to the brim. The valves should be under the fields. While the glue is drying, you can place something heavy on the joint area.

We glue the strip (detail D in the diagram), connecting it into a ring, and bend the valves outward. We glue it to the brim of the sombrero with flaps under the part, forming the lapel of the headdress. To prevent the cardboard from warping and to make the adhesive joint stronger, you can briefly put the parts under the press. We glue another part A, as shown in the photo below, to close the valves and give the product greater strength.

If you use regular white cardboard, it is advisable to paint it straw yellow. You can draw lines with a pencil that imitate the horizontal weave of straw.

After the glue has dried, we begin decorating the hat. To do this, cut out equilateral triangles from red paper with a height equal to the height of part D, and glue them along the entire flap of the fields. We cut out smaller triangles from green paper and glue them between the red triangles to create an even border of base material around each element. We decorate the crown in the same way. Here you can show your imagination and alternate triangles with stripes or zigzags.

Using a needle and thread, we make a loop under the brim so that the sombrero can stay on the head and not fly off. You can pass a cord through the brim, the knots of which need to be tightened under the chin. As an additional decoration, we use tassels glued to the crown or fields of the image in the Mexican style, etc.

Video on the topic of the article

We invite you to watch other master classes in video format on making a sombrero.

Sometimes you need to come to a holiday in costumes of different peoples of the world. Here parents will have to carefully consider the national costumes and choose the one that will look impressive, and which will be easier to make. In this article we will look at a version of the Mexican New Year's costume. This outfit is more suitable for a boy. The suit actually consists of the upper part. You can wear any dark pants, even jeans will do.

Cape

One of the elements of the Mexican costume will be a striped poncho. This is a woolen cape that the people of Mexico wear during the cold season. It’s not difficult to make, you just need to buy striped dense material, preferably bright, perhaps with a geometric pattern. A double measurement from the child's shoulder to mid-thigh will be sufficient.

You can even make it shorter, but so that the belt is covered. The fabric is folded in half and a neckline is cut in the center of the fold. The neckline is trimmed with piping, and laces with pom-poms are tied on. A ribbon with fringe or tassels should be sewn onto the bottom edge of the Mexican costume. The width of the poncho is the distance from the middle of one shoulder to the middle of the other. The cape should hang from the shoulders.

Vest

For a Mexican costume for a boy, you can sew a vest instead of a poncho. The material is also striped. It is desirable that the traditional colors of Mexican national costumes be present. These are brown, red, black, yellow, orange, green. Also, complete with a vest, you need to make a red wide satin belt for the Mexican costume, which is tied on the side with a bow.

Sewing a vest is easy; you can use a standard pattern. If you don’t have one, then take an old children’s vest and outline it on a newspaper, then cut out the pattern along the outline and sew all the parts together with internal seams. Any mother who has ever held a needle and thread in her hands can do this. You don't need any special skills to sew a Mexican costume for a boy. To prevent the vest's hems from coming apart during the dance, you can sew a bright cord with a pom-pom on each half and tie both halves together with a bow. It is better to wear black trousers for this outfit. You can sew a ribbon with pompoms or tassels onto the side seams of the pants. Under the vest, wear a loose-fitting white shirt with wide sleeves at the cuffs.

Belt

The belt for a Mexican costume needs to be wide and bright. It is better to buy a piece of red satin. Cutting the belt is easy. This is a long strip folded in half. Sew the fabric along the wrong side so that the seams are not visible. The edges of the belt can be made into an angle. The belt for a Mexican costume is not sewn up completely so that it can be turned right side out. The remaining section is closed with an internal seam, carefully so that the threads are not visible.

DIY sombrero

For such a New Year's outfit, a boy can pick up a wide hat in any store. A lot of them are sold for the holiday, just like Santa Claus hats. Chinese industry is doing great before the holidays. But a hat does not always go well with an outfit, especially when you need a Mexican costume.

The first option for making a sombrero with your own hands will be the following: you can buy a black hat and sew a red satin ribbon in a circle. Then the edge of the sombrero can be trimmed with a ribbon with pom-poms, which is also red. Paired with a bright vest or poncho and a red belt, this headdress will look great.

Sombrero made of colored paper strips

To make such a spectacular one, you need to prepare sets of colored tissue paper in the brightest colors. As a basis, you can take a real straw hat, which is found in almost every closet. The height of the central part of the headdress can be increased due to a truncated cone cut from foam rubber. It needs to be glued, or better yet, secured with stitches using a needle and strong thread. Then we begin decorating work. Strips of paper are cut to equal widths and the edges are thickly cut into “noodles”. Then the entire surface of the hat is covered with paper in layers. You can sew it on.

Work begins with the brim of the headdress and ends at the top. The inside is left unchanged so that the child’s hat does not rub the child’s skin.

Homemade hat

If you don’t have a hat at home, or it’s new and beautiful, which you don’t want to turn into a sombrero, even if only temporarily, don’t worry. It’s great to make such a stylish ethnic hat for a Mexican costume with your own hands. To do this you will need a sheet of Whatman paper, thick PVA glue or colored paper. A circle is drawn in the center on a piece of Whatman paper. After trying it on your head you can adjust it. Next, using a compass or a round object (for example, a pan lid), draw the outer contours of the hat. The result was a blank in the shape of a wheel. The next step is to fold a cone around the boy’s head and fasten the edges with a stapler. The bottom is cut along a straight line, the top of the figure is also cut. This cone is inserted from the inside of the “wheel” and glued from the inside using PVA glue and strips of paper. A round lid is cut out and glued to the top of the truncated cone.

All that remains is to cut out a long strip-rim for the sombrero and attach it with strips of paper. To make the hat bright, you need to paint it with gouache or decorate it using appliqué. To keep the hat on the child’s head, you can thread a thin rope at the base that matches the color of the coloring book.

As you can see, it’s not difficult to make a Mexican costume with your own hands, you just need to show the desire and spend a couple of hours making the outfit, but at the matinee the boy will have the most spectacular and bright costume, and the minimum amount of money will be spent.

Paper sombrero

• double-sided tape;

The manufacturing algorithm is as follows:

Here are some more options:

• glue a piece of fabric;
• wind lace or twine;
• tie a satin ribbon.

Cardboard version

Then the only thing left to do is to decorate your sombrero as you please. For decoration, you can use paints, colored paper, you can add three-dimensional elements made of fabric or colored cardboard, you can tie the crown with threads or ribbons. Do whatever your heart desires!

Video on the topic of the article

The video below will help you get inspired.

We will need:

• paper;
• flower pot;
• scotch;
• scissors;
• ruler;
• paints;
• decorative cord.

Are you planning a fancy dress costume? Are you wondering how to make a paper helmet, a pirate's cocked hat, a hat for a witch or a cowboy? Use step-by-step instructions and master classes to help you learn how to make a paper hat. Such simple homemade hats will be a good alternative to store-bought costumes, and will look no less bright and original.

DIY paper hats

DIY paper hats are an easy way to spice up your fancy dress costume. Using glue and scissors, you can easily make an original Mexican sombrero, a pirate cocked hat, an elegant top hat or a snowman's cap. The famous blue Dunno hat, trimmed with fabric, will make the simplest costume of this fairy-tale hero recognizable. The instructions for making each headdress will tell you how to make a hat from cardboard, paper and other additional materials at hand.

Pirate

Let's learn how to make a pirate hat with your own hands from paper. To implement our plan we will need:

• black paper (1 sheet of A3 format);
• hat elastic;
• scissors;
• awl;
• glue;
• white paper;
• black felt-tip pen or pen.

Instructions:

Sombrero

DIY paper hats are crafts that successfully use other available materials. To make a Mexican sombrero, we will need the following materials:

• thick red paper (painted Whatman paper);
• plastic flower pot;
• wrapping paper;
• decorative cord.

How to make a Mexican hat out of paper? Using tape, paints, a ruler, scissors, and a compass, we begin making:

Cylinder

Top hat is a universal hat. It is suitable for the costume of Dracula, the Snowman, and the old woman Shapoklyak. This hat with a veil will be a flirty addition to many ladies' masquerade outfits. The main thing is to decide on the height of the crown and the width of the brim, and then create the headdress itself for a specific character. For the cylinder we will need the following materials and tools:

• whatman;
• glue;
• colored fabric (paper);
• scissors.

Instructions on how to make an elegant paper hat:

1. We draw a rectangle on whatman paper (one side is the height, the other is the circumference of the crown). Cut it out.
2. We glue the pipe by connecting the part along the edges of the height of the rectangle.
3. We draw a crown around the circumference on a new sheet of whatman paper.
4. We outline the resulting circle with another one at a distance equal to the width of the fields of the future cylinder.
5. We draw a small hole from the inside, stepping back one and a half centimeters from the contour of the circle.
6. Cut out this small circle.
7. From its edge to the drawn line of the inner circle we make notches and fold the paper along the drawn contour.
8. Again we draw a crown around the circumference on a new sheet of whatman paper.
9. We cut out the part along the contour, stepping back about one and a half centimeters outward for notches - this is the top of the crown.
10. We make cuts with scissors and bend the paper along the drawn contour.
11. We glue the crown-tube with the round top part.
12. Glue the fields to the cylinder (we apply the notches from the inside of the cone).
13. We cover the hat with colored paper or fabric.
14. We decorate as desired (brooches, feathers, veil, ribbons, etc.).

For the snowman

A paper hat for a Snowman costume is the simplest version of a masquerade hat if you make a cap. A light hat made of corrugated paper - a crooked and crumpled cylinder - will be original. We already know how to make this version of the headdress. Let's try to make a cap. To make it we will need:

• whatman:
• paints with brushes;
• colored paper;
• glue;
• hat elastic;
• scissors.

1. We draw a circle on whatman paper, the radius of which is equal to the height of the cap.
2. We measure the volume of the future Snowman's head.
3. We measure this number of centimeters along the length of the drawn circle.
4. We put marks - in the center of the circle, the beginning and end of the measured line (head volume).
5. We draw two lines from the marks on the circle to the center of the circle.
6. Cut out the resulting sector.
7. Roll up the cone.
8. We glue it or fasten it with a stapler.
9. We paint with paints or paste over our cap for the Snowman with colored paper.
10. We attach a hat elastic to it.

Find out from plastic cups.

For Dunno

For the Dunno hat we will need the following tools and materials:

• cardboard;
• blue (blue) fabric;
• superglue or stapler;
• yellow corrugated paper;
• hat elastic;
• paints or brushes.

Manufacturing:

How to make from paper

How to make paper hats for children using an old unwanted newspaper? A light cap or cap with a visor can be made in just a few steps, without the need for glue, scissors, or any additional materials. For training, you can try the technology on standard A4 sheets, and at the same time decide on the size of future newspaper hats.

Cap

This instruction will tell you how to make a paper hat from newspaper when you don't have a Panama hat on hand. For an adult, you will need a large sheet of newspaper (A3 tabloid); for a child, half a spread will be enough. Let's look at how to make a cap out of paper, using a standard A4 sheet as an example:

Cap

Are you not satisfied with a simple cap? Let's learn how to make a newspaper cap - a lightweight hat with a sun visor. To make such a hat, we only need a sheet of newspaper:

1. Take a sheet of newspaper (A3 format) and place it with the long side facing you.
2. We bend the upper corners towards the center and towards ourselves so that we get a triangle.
3. Fold the free lower rectangular strip in half up and in the same way again.
4. Turn the hat over backwards.
5. We wrap the triangles protruding beyond the edges of the product from the folded strip inward (toward ourselves).
6. Fold the right and left edges of the hat towards the middle.
7. We bend the lower free rectangular strip upwards, butt-joint with curved edges (see the previous paragraph).
8. We form the visor by making small bends on the sides.
9. We tuck them under the resulting envelope on the hat.
10. Turn the cap with the bottom side facing you.
11. Fold the top of the hat down and tuck it under the lapel.
12. We straighten the cap, open it, try it on.

Also check out:

Have you decided to play wild prairie heroes with your child or are you getting ready to? Then it won't hurt you to get into character by wearing a luxurious sombrero. And it is not at all necessary to spend money on purchasing this accessory, especially since you will only need it once. Simple to make, but at the same time an original paper sombrero, you can make it yourself. The child will be happy with such a gift, because now you can dress up and play to your heart's content, without fear of ruining your headdress.

In the master class below we will tell you how to make a Mexican sombrero hat with your own hands from scrap materials.

We will need:

• paper;
• flower pot;
• scotch;
• scissors;
• ruler;
• paints;
• wrapping paper or thin fabric;
• decorative cord.

Having a little time left, you can experiment with sombrero decor. A variety of ribbons of different colors, applications of small triangles, fringe, small buboes - all these elements will turn your craft into an original headdress.

Video: How To Make A Top Hat, DIY Steampunk Fashion Pattern Tutorial

Video: Decorative Sombrero Hats

Video: Straw sombreros

Video: Sombrero

A newfangled trend has emerged in many kindergartens and schools - organizing masquerades. I want the baby to look special, bright, not like everyone else. What about such a colorful character as the Mexican? Many boys will definitely like this look, and your hero will look very bright and unique at the matinee. First of all, you need to remember what attributes are needed to create the image of a native Mexican. Their list is not that long. These are maracas, ponchos and, of course, a sombrero - a large wide-brimmed hat of a characteristic style. To create a poncho, a small blanket or thick scarf is suitable, rattles left over from toddlerhood can be used as maracas, and it’s easy to make a sombrero yourself. This article contains tips on how to make a sombrero with your own hands.

Paper sombrero

A paper sombrero is the easiest way to make this accessory. This option is perfect if you want the child to carry out the idea on his own, or if there is no time to prepare and complete the work, because such a sombrero is made quickly and very easily. Also, when choosing this version of the product, you do not need to waste time and money on preparation and materials.

For the entire process of creating a sombrero you will need:

• sheets of colored paper (the paper should be bright colors; orange or red will look best);
• tools for work: scissors, brushes;
• mayonnaise bucket (you can use other available materials, those that are available);
• colored paints, it is better to use gouache;
• double-sided tape;
• decorative elements: beads, braid, feathers, laces, etc.

The manufacturing algorithm is as follows:

1. From colored paper you need to cut a circle with a diameter of 40 cm (the diameter can be different, it all depends on how wide-brimmed the hat you want to end up with).
2. Inside the circle cut out in step 1, draw a circle whose diameter is 0.5 cm less than the diameter of the mayonnaise bucket.
3. Cut a hole inside the drawn circle. The radius of this hole should be one centimeter less than the radius of the drawn circle.
4. We make cuts from the inner hole to the drawn circle. This is clearly shown in the photo below.

1. We attach a circle of colored cardboard to the mayonnaise bucket with glue. The notches are glued overlapping onto the walls of the bucket.
2. Leave the product and let the glue dry
3. After drying, we move on to decorating the mayonnaise bucket with paints. The typical pattern for Mexican sombreros is horizontal stripes of black, green, red, yellow and orange.

To ensure that the edges of the strips are even, you can limit them before painting with masking tape, but it is very important to dry each previous layer, otherwise all the paint will remain on the tape after it is removed.

1. Leave the product to dry the paint.
2. We attach a cord or rope to the inside of the sombrero, which will hold it on the head.
3. We decorate with a crown (the crown is the cone-shaped part of the sombrero that rises above the brim). The main task will be to hide the place where the brim is attached to the crown. This seam can be hidden under decorative tape glued on top with glue.

Here are some more options:

• glue a piece of fabric;
• glue a flat strip of colored paper;
• wind lace or twine;
• tie a satin ribbon.

This simple master class will allow you to create a beautiful and unique paper sombrero on your own or together with your child.

Cardboard version

A cardboard sombrero is more labor-intensive, but requires fewer materials to create.

To make such a headdress you will only need cardboard, tools and various decor.

First of all, patterns are made from a sheet of cardboard, as in the photo.

The size of the pattern pieces depends on the desired size of the product and, of course, on the head size of the person who will wear this accessory.

In the second stage, the parts are cut out and assembled together.

After completing the second stage, you should end up with something like the one shown in the picture below.

Sombrero is the national, colorful headdress of the people of Mexico. Its variegation and memorable, comical shape of the hat are a distinctive feature that cannot be confused with any other headdress.

Exactly for these features and for the “energy” of fun and good mood, which the headdress carries, many want to have one in their wardrobe!

How to make a sombrero yourself? It turns out that this Mexican hat is very easy to make! Today we will cover this topic in more detail!

First, let's get acquainted with its types. Mexican hats are traditionally divided into the following types:

Charro

A hat with a bright, embroidered ornament.

The motive for embroidery can be nature or family affiliation (for example, a family title can be embroidered).

Vaquero

Rain protection for shepherds. Reminiscent of the appearance of a cowboy hat - it has curved edges, along with a not too high crown.

Wilton

The original is made from a reed plant. Two colors predominate: black and white.

Pintado

Its edges bend down. It is lightweight and can be used in hot climates due to its thin material.

Knowing these varieties, you can decide on the choice of the future product and start making your own hat! Let's go!

How to make a sombrero with your own hands?

The easiest way to make a hat is from paper and cardboard, but if you want to make it from fabric, just replace the cardboard and paper with fabric and follow these instructions.

All sizes and colors are selected individually and depend on your goals and creative ideas!

Making a crown

Crown - the upper part of any hat (hats, caps, etc.).

Roll a cone out of thick paper (cardboard) and cut off the correct part, according to the size (“height”) of the head.

When designing, learn that it is necessary to leave space for joints with other parts of the product - leave a couple of centimeters from the outside.

We make fields

Colored paper is perfect for making fields; if this is not available, use white paper, and then color with paints or felt-tip pens.

In the central part of the sheet, draw a circle (the radius of the future hat), with a circle under the crown.

As with the crown, you need to leave a few centimeters for future joining of parts.

Connecting the parts

To connect the parts, you can use double-sided tape, paper clips or paper glue.

The junction can be additionally “camouflaged” with paper tape over the joint, which will completely hide it from prying eyes.

If the idea requires it, you can decorate the sombrero with LED lights and other decorative elements. It all depends on the idea and imagination!

Sombrero is ready!

A sombrero is a great addition to any noisy party, fun company or a good holiday on the beach. Add a little Mexican positive mood and color to your life, along with a sombrero!