Sombrero... What do you associate this word with? Perhaps with hot and sunny Mexico, where this headdress, by the way, is part national costume. Or maybe you immediately imagine a warm sandy beach where you can sunbathe, hiding your face from the scorching rays of the sun under this peculiar hat. In any case, if you are interested in how to make a sombrero with your own hands, this article will be useful to you.
Let's start with the fact that you can easily make a sombrero even from ordinary cardboard. But if you are a real needlewoman and know how to weave wonderful things from straw, then try weaving a sombrero instead. Then you will have an analogue of a real headdress worn by indigenous Mexicans. Well, if you are just starting your handicraft journey, then we suggest you make a sombrero from thick cardboard and fabric. Even those who have never made anything like this can do this.
Sombrero made of cardboard and fabric
You will need thick cardboard (a couple of sheets large size), scissors, fabric for drapery (velor or velvet are best), as well as all kinds of beads, braids, chains, in general, everything you want to decorate your creation with. And of course, don’t forget about glue or thread, because the components of the hat will need to be connected with something.
First, draw and cut out a circle with a diameter of 40 cm from cardboard. In this circle, cut a hole in the center with a diameter of 15 cm. You have the brim of a sombrero. Now you need to make the crown. To do this, take a piece of cardboard of the same size as the height you plan to make the crown, and roll it into a cone shape (like a bag). Secure with glue or thread so that the cone does not fall apart.
Now our task is to connect the fields and crown with each other. They can be sewn with threads, or they can simply be glued together. To make gluing more convenient, bend the lower edges of the crown upward by about 1 cm, coat them with glue and attach tightly to the brim. The sombrero frame is ready, let the parts grip each other well.
Since now our sombrero looks quite “poor” and it’s clearly impossible to go anywhere in it, you’ll drape it with fabric and then decorate it. Take measurements from the hat and cut the required amount of fabric. Folding the edges of the fabric, carefully shape the hat. To make the brim of the sombrero appear more voluminous, you can put a small cotton or foam layer under the fabric.
The last step left is decoration. Although, if you like the sombrero just the way it is, you can leave everything as it is. You can decorate a hat with large beads strung on threads, you can do embroidery, or you can buy special applied designs for clothes in the store. The choice is yours, show your imagination.
You can cut several leather ribbons and weave them into a beautiful braid. Then lay it beautifully over the brim of the hat and secure it. The decoration work is the most interesting, because now you are giving your hat that unique look, thanks to which handmade style work is so valued. It turns out to be a unique thing that only you will have.
This headdress can be worn to the beach in the summer, or taken with you to the dacha. Since making a sombrero is very simple, you can make yourself several versions of such a hat and change them periodically. Well, if you have a little daughter, then give her such a gift - she will probably be happy.
The sombrero is an element of the national Mexican costume; it is a hat with a cone-shaped crown and wide, upturned brim. Even novice needlewomen can easily make this colorful headdress on their own. It is suitable for a costume party or a matinee in kindergarten, and if desired, the sombrero can also be worn in the countryside, because its large brim perfectly protects from the sun. Below is detailed master class c step by step photos the process of making a sombrero quickly and easily with your own hands from scrap materials.
How to make a sombrero with your own hands from paper
This is the easiest way to make a headdress, since you do not need to glue the crown separately; it can be replaced with any object of a suitable shape.
- dense colored double sided paper bright color;
- a flower pot made of lightweight plastic or a mayonnaise bucket;
- white and colored paint;
- brush;
- glue or double-sided tape;
- scissors;
- decorative elements: colored threads, cords and ribbons.
Cover the flower pot with 1-2 layers of white paint and let it dry. Then we turn it over, put it on paper and trace it along the outline with a pencil. From the edge of the circle we set aside the required width of the margins and draw another circle. We cut out the part, make perpendicular cuts along the inner contour in increments of 1.5-2 cm. We carefully bend the resulting fringe upward.
We carefully bend the outer part of the fields upward, stepping back from the edge about 5 cm. We paint the pot, applying with a brush wide stripes of bright colors most loved by Mexicans: yellow, black, green and red. To ensure that the stripes are even, we make markings using tape and apply paint along its contours. To make the colors more vibrant, it is advisable to apply them in 2-3 layers with mandatory intermediate drying. Apply glue or double-sided tape with a high adhesion rate to the inner rim of the fields. Carefully place the inverted pot with dried paint on the margins, aligning its edges with the hole in the paper, and glue the resulting crown, pressing firmly over the entire surface.
We decorate the finished sombrero to your liking. The easiest way is to throw bright twisted silk cords with tassels over the crown and tie them in a knot. The embroidery on the margins looks very nice. To do this, we use a needle with thick threads of contrasting color to the fields. We embroider simple Mexican motifs: intersecting straight lines, diamond-shaped mesh, stripes, triangles and zigzags. The paper sombrero is ready!
Let's try to make our headdress out of cardboard
A more complex and very effective sombrero is made from cardboard. In this case, all its parts are cut out from the same material and glued together.
- thin yellow cardboard (double-sided);
- colored paper;
- PVA glue;
- pencil;
- scissors;
- thread and needle;
- compass, protractor, ruler.
We measure the circumference of the head. We build a drawing on cardboard using a compass, ruler and protractor. An approximate drawing is shown in the diagram below, your dimensions may vary.
Carefully cut out all the details. We glue the crown (detail B in the diagram), while simultaneously bending the triangular flaps outward. We glue the bottom to the crown, then mount the crown to the brim. The valves should be under the fields. While the glue is drying, you can place something heavy on the joint area.
We glue the strip (detail D in the diagram), connecting it into a ring, and bend the valves outward. We glue it to the brim of the sombrero with flaps under the part, forming the lapel of the headdress. To prevent the cardboard from warping and to make the adhesive joint stronger, you can briefly put the parts under the press. We glue another part A, as shown in the photo below, to close the valves and give the product greater strength.
If you use regular white cardboard, it is advisable to paint it straw yellow. You can draw lines with a pencil that imitate the horizontal weave of straw.
After the glue has dried, we begin decorating the hat. To do this, cut out equilateral triangles from red paper with a height equal to the height of part D, and glue them along the entire flap of the fields. We cut out smaller triangles from green paper and glue them between the red triangles to create an even border of base material around each element. We decorate the crown in the same way. Here you can show your imagination and alternate triangles with stripes or zigzags.
Using a needle and thread, we make a loop under the brim so that the sombrero can stay on the head and not fly off. You can pass a cord through the brim, the knots of which need to be tightened under the chin. As an additional decoration, we use tassels glued to the crown or fields of the image in the Mexican style, etc.
Video on the topic of the article
We invite you to watch other master classes in video format on making a sombrero.
Sombrero is the national, colorful headdress of the people of Mexico. Its variegation and memorable, comical shape of the hat are a distinctive feature that cannot be confused with any other headdress.
Exactly for these features and for the “energy” of fun and good mood , which the headdress carries, many want to have one in their wardrobe!
How to make a sombrero yourself? It turns out that this Mexican hat is very easy to make! Today we will cover this topic in more detail!
First, let's get acquainted with its types. Mexican hats are traditionally divided into the following types:
Charro
A hat with a bright, embroidered ornament.
The motive for embroidery can be nature or family affiliation (for example, a family title can be embroidered).
Vaquero
Rain protection for shepherds. Reminds me appearance hats for cowboys - they have curved edges, along with a not too high crown.
Wilton
The original is made from a reed plant. Two colors predominate: black and white.
Pintado
Its edges bend down. It is lightweight and can be used in hot climates due to its thin material.
Knowing these varieties, you can decide on the choice of the future product and start making your own hat! Let's go!
How to make a sombrero with your own hands?
The easiest way to make a hat is from paper and cardboard, but if you want to make it from fabric, just replace the cardboard and paper with fabric and follow these instructions.
All sizes and colors are selected individually and depend on your goals and creative ideas!
Making a crown
Crown - the upper part of any hat (hats, caps, etc.).
Roll a cone out of thick paper (cardboard) and cut off the correct part, according to the size (“height”) of the head.
When designing, learn that it is necessary to leave space for joints with other parts of the product - leave a couple of centimeters from the outside.
We make fields
Colored paper is perfect for making fields; if this is not available, use white paper, and then color with paints or felt-tip pens.
In the central part of the sheet, draw a circle (the radius of the future hat), with a circle under the crown.
As with the crown, you need to leave a few centimeters for future joining of parts.
Connecting the parts
To connect the parts, you can use double-sided tape, paper clips or paper glue.
The junction can be additionally “camouflaged” with paper tape over the joint, which will completely hide it from prying eyes.
If the idea requires it, you can decorate the sombrero with LED lights and other decorative elements. It all depends on the idea and imagination!
Sombrero is ready!
Sombrero is a great addition to any noisy party, fun company or have a good rest on the beach. Add a little Mexican positive mood and color to your life, along with a sombrero!
Have you come up with the idea of making an extravagant costume for a masquerade party and are you looking at a photo of a hat with your own hands? Then this article is just for you.
Here you will learn how quickly and easily you can sew a hat with your own hands for almost any occasion.
Such hats, which are fairly easy to create, can easily become a good replacement for expensive purchased costumes, and at the same time they will look almost as unusual and interesting.
Making a hat from plain paper
Of course, a paper hat is one of the most simple methods add a little variety to your outfit purchased for a masquerade.
Using any scissors, as well as ordinary glue, you can quite simply create an incredible sombrero, which all travelers in Mexico love to buy, a cocked hat, like a pirate’s, or even a beautiful top hat, like a real gentleman’s.
Definitely a cardboard hat is an ideal option for those who do not have a lot of free time, but who would really like to surprise the guests of the event.
Making a hat like a pirate's
If unexpectedly the teachers in the group said that a hat is needed kindergarten for the holiday, don’t panic, even if you’ve never done anything with your own hands before.
First of all, you need to prepare the materials that you will need later: this is colored paper, preferably white, black or any other bright color to add originality to the hat, an elastic band for the hat, a needle, glue, as well as a felt-tip pen or black pen.
Step by step instructions
Draw a square on black paper and cut it out. Please note that the side of the square should be equal to the shortest side of the A3 sheet.
Turn the cut out square into a circle by carefully rounding the corners of the shape.
Fold a white sheet twice the length. Cut the resulting strip crosswise to create a beautiful fringe, it is important not to touch the bottom edge.
Unfold the sheet and cut it straight along the folds. Twist the fringe on each strip a little with a felt-tip pen or marker.
All curly stripes should be glued to a black circle.
It is important to pay attention to the fact that in order for the fringe to look neat, you need to glue it in such a way that all the edges you have folded look exclusively upward.
Directly in a circle, you need to mark three points that will be at the same distance from each other.
From each mark to the next, three folds are made. As a result, you will see a triangle with equal sides. The brim of the hat must be turned up.
When thinking about how to decorate a hat, you can, for example, make two feathers. The technology is similar to the principle of creating fringe.
Pay attention!
For the front part of the headdress, you need to cut out a terrible white skull with several bones. Next, it is painted and glued to another folded field.
All that remains is to pierce two holes in the hat with a needle and secure the elastic.
After such detailed instructions, no one will probably be left with the question of how to make a hat with their own hands.
If you need a hat for a girl for the holiday on February 23, then the ideal option is to create a cap.
How to make a simple cap at home?
In order to make a cap for a child, you will need half a sheet of any old newspaper with A3 format or an ordinary sheet with A4 format.
Pay attention!
What should be the sequence?
- Fold the sheet in half with the short sides facing each other and turn it with the resulting fold upward;
- The corners located on top of the resulting figure must be folded down and then towards the center, and then all the folds are smoothed out;
- It turns out to be a paper house with a neat triangular roof;
- The lower, fairly long rectangular strips must be turned up on each side and the folds smoothed again;
- Wrap in different sides triangles that remain free and thus secure a homemade hat made from waste paper.
It’s so simple, in just a few hours you can create a rather interesting headdress for a child or for yourself.
All you need, besides materials, is a little imagination and patience in painstaking work.
DIY hat photo
Pay attention!
Have you decided to play wild prairie heroes with your child or are you preparing for one? Then it won't hurt you to get into character by wearing a luxurious sombrero. And it is not at all necessary to spend money on purchasing this accessory, especially since you will only need it once. Simple to make, but at the same time an original paper sombrero, you can make it yourself. The child will be happy with such a gift, because now you can dress up and play to your heart's content, without fear of ruining your headdress.
In the master class below we will tell you how to make a Mexican sombrero hat with your own hands from scrap materials.
We will need:
- paper;
- flower pot;
- scotch;
- scissors;
- ruler;
- paints;
- wrapping paper or thin fabric;
- decorative cord.
- Take a flower pot and paint it with a coat of white paint. Let it dry thoroughly.
- On a piece of red paper, trace the outline of the top of the flower pot with a pencil. Using a compass, draw another one inside the circle, but with a smaller diameter (3-4 centimeters). Then draw a third circle, the diameter of which will determine the width of the sombrero brim. To do this, you can draw two perpendicular lines through the center of two existing circles.
- Cut out the smallest circle, and from its edge towards the middle circle, make small cuts. After this, bend all the resulting cloves upward.
- Process the edges of the sombrero in the same way, but make the teeth at a distance of 4-5 centimeters from each other. Glue the overlapping teeth together.
- On the pot, draw horizontal stripes with bright colors and a wavy line along the bottom of the crown. Then, when the paint dries, cover the edge of the pot with double-sided tape.
- Connect the pot with a piece of paper and, if necessary, hide the joints with paint. All you need to do is attach a decorative cord to the sombrero, which will serve as ties. A colorful sombrero in the Mexican style is ready!
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Having a little time left, you can experiment with sombrero decor. Various ribbons different colors, appliques from small triangles, fringe, small buboes - all these elements will turn your craft into an original headdress.
