Modular origami diagrams for beginners flowers. Modular origami - flowers

This article will talk about how to make modular origami. A flower scheme is a whole culture of creating different bouquets. The basis of the crafts are small modules made of multi-colored paper. This technique is assembled like a construction set and allows you to obtain various voluminous flowers. There are a lot of variations of the creation: roses, lilies, cornflowers, daisies, water lilies and even flowers in the form of three-dimensional balls on a thin stem.

Amazing art

Modular origami- this is the amazing art of creating three-dimensional figures. This technique originated in China. Thanks to small folded triangles, you can make various variations of houses, animals, plants, cars. Adults and children create unusual souvenirs, garlands, and Christmas tree decorations with their own hands. It all covers The color scheme is very simple to create. Its peculiarity is that the crafts are made up of various small modules. Such flowers are almost impossible to distinguish from real ones. They are decorated with rhinestones, sparkles, foil, and varnish. Finished works are used to decorate the premises of houses, apartments and offices. Bouquets are hung in flowerpots, placed in vases, on bookshelves, and window sills.

Preparing for work

The workplace must have a flat surface. To make origami modules you will need:

• several sheets of A4;
• pencil;
• ruler;
• scissors;
• office glue.

Modular origami for beginners is just the first step in understanding this art. There are various more complex ways of making figures: development, quilling, kirigama, monegami, kusudama. For modular technology, paper or cardboard is used different colors. A sheet of paper is drawn into several equal rectangles. To make the future craft larger, you can cut the sheet into 16 equal parts. If less - by 32.

• 53 x 74 mm;
• 37 x 53 mm.

Creating an origami module

1. The rectangle is folded in half horizontally.

2. Then fold it in half vertically. The workpiece must be returned to its original position. The result is two straight lines along which you can make a module.

3. One side of the workpiece is folded towards the middle.

4. The second mirror side folds towards the middle in the shape of an airplane.

5. The lower part of the workpiece is bent in an even line.

6. The protruding sections are folded.

7. The protruding workpiece is folded upward.

8. The structure is bent in half. Both sides of the module are firmly connected.

Modular origami for beginners covers various variations of creating crafts. Such schemes are very simple. If you follow the exact instructions, even a child will create it on his own. original craft. Let's look at several ways to create flowers.

Modular origami: instructions for creating a lily

To create a lily you will need paper of two colors. You can combine shades to your liking. White and red, orange and gold, pink and yellow look great. You will need 85 modules of one color and 50 modules of another. To create the stem you need to use green paper. You will need 39 emerald modules. In total you will need 174 blanks. This is exactly the amount that modular origami covers. Assembling the lily starts from the center. The blanks are connected into an even ring. 2 rows are created. Each of them uses 5 modules. Thanks to these details, it will be possible to fasten future petals.

To create a flower petal, 1 module is used in 1 row. Then in each row their number increases by 1 piece. In row 2 - 2 modules, in row 3 - 3, in row 4 - 4 modules, in row 5 - 5 modules. Starting from the 6th row, their number decreases by 1 piece. 6th row - 4 modules, 7th row - 3 modules, 8th row - 2 modules, 9th row - 1 module. Since we used 5 modules to create the center, we will need 5 petals. To make the stem, you need to alternate 1 and 2 modules in each row. Odd row - 1 module, even row - 2 modules. The leaf of the stem is assembled according to the scheme: 1, 2, 3, 3, 3, 2, 1. The leaf is attached in the middle of the stem. Stamens are created from white cardboard. The material is rolled into a tube. Then it scrolls around its own axis. The flower is placed on the created stem. The stamens are inserted inside. The modular lily is ready! Another way to create a composition is presented above.

Queen of flowers - rose

A beautiful flower that will perfectly decorate a bouquet, this Modular art covers different creation techniques. The easiest way is shown in the photo. Let's consider the most difficult one in more detail. To create such a rose you will need 9 modules. Three of them have their valves cut off. Then they need to be rolled up. To do this, you can use a knitting needle, a tube, or a wooden stick. The long side of the module should be on the same level, that is, with a flat end. The corners of the remaining 6 modules are bent, creating the illusion of a petal bending. For the base, a small circle with a diameter of no more than 2.5-3.0 cm is cut out. The valves of the three modules are lubricated. Then they are attached to the base. Three more similar modules are glued inside. Modules with cut off valves are placed in the center.

The stem can be made from wire painted in green. You can use a tube or stick, which must be covered with emerald-colored paper. The bud is carefully attached to the stem. To create a greater effect, you can cut out petals from green cardboard. It should work out beautiful rose(origami). Modular art recommends mixing these flowers with other types to create excellent bouquets. Usually, roses are placed in the center. Asparagus, bergrass, fern, gypsophila or ruscus are installed along the edges. Roses look great in combination with lilies, daisies, forget-me-nots, tulips and peonies.

Modular in the form of a ball

To create flowers, it is recommended to use double-sided cardboard or colored paper. It is desirable that the sides of the workpiece be of different shades. Modules of the same size are made of paper. Then they are given a three-dimensional shape. The corners are pinched and glued to each other. Created volumetric ball from multi-colored modules. Rolled paper is used as stamens.

To fasten the workpiece, use tubes, sticks, laces and thin ropes. Various techniques craft creation covers professional modular origami. Kusudama color scheme is one of the rarest and simple ways. If you strictly follow the instructions, you will get a bouquet of unprecedented beauty. Above is another way to create such flowers.

Origami is commonly understood as the Japanese art of creating various objects, animals, and birds from paper (by bending it). This hobby is suitable even for beginners, because following the instructions, you will get the same masterpiece as in the picture. In this article we will look at modular origami and methods for making these beautiful and pleasing flowers.

Roses, lilies, daisies, tulips - various designs will help bring all your ideas to life. Modular origami Flower can be made in the form of a composition in a vase or without it. And you will certainly end up with some admirable bounty from the flora.

The most ordinary piece of paper in the hands of a person can turn into a beautiful and unusual craft. Moreover, this applies to both novice masters and experienced specialists. The schemes for creating flowers are simple; all you need to do is follow the assembly instructions exactly and not skip a single step. Below we will make a charming craft called “Rose”.

By making a modular origami Flower in a single quantity, you will receive beautiful gift, and if you make several crafts, they can be placed in a vase.

Depending on what shade you want to make the rose, choose a shade of paper.

First you need to cut a circle out of paper (diameter 25 mm). Next, you should prepare 9 triangular modules in advance to create the craft.

Using glue, the first three or four triangular modules are glued onto the circle so that the main sharp part is outside the circle and can be bent like a petal.

To create a bud, you need to twist three blanks and glue them in the center. The rose is ready. You can move on to creating the legs.

To create a leg you will need a pen rod. Pre-prepared green or brown modules are screwed onto it and fixed with glue.

To make the rose look natural, you can glue several cut leaves to the stem.

The stem is attached with glue and cardboard to the bud itself. With this our craft is ready.

As you can see, the assembly scheme is simple, and creating the craft will be easy even for beginners. If you make several gifts of flora, you can arrange them in a vase. Modular origami Flowers is a great activity in your free time, as well as an opportunity to please your loved ones with your craft.

Delicate water gifts of flora

Who doesn’t feel better when there are beautiful flowers in a vase at home? However, not everyone knows that you can create a bouquet yourself, with your own hands. Such lilies, roses or tulips will delight you for a long period of time. You can simply place them in a vase or decorate the interior. In addition, the assembly process (using a diagram) is also a fun activity. You can create crafts together with your children or loved ones. And in order for everything to work out correctly, it is enough to adhere to the scheme.

By the way, not only experienced people, for whom “origami” is a favorite pastime, can create gifts of flora in a vase; those who are just starting out can also use the patterns. For beginners, this activity will be an exciting hobby.

To create a water lily you will need a green piece of paper and a pink one. Green is the leaves of the lily, pink is the lily itself.

By folding the craft as required by the diagram, you will get an original and beautiful water lily.

Tulip

It's exciting and fun to create origami with your children. The tulip is considered one of the easiest to create. To make it you will need two squares of colored paper: red for the bud, green for the stem.

First, let's make a bud. To do this, the sheet is folded in half, two opposite corners are connected to form a triangle. After this, each of the two corners is bent to the opposite side: first the right, then the left. Our bud is almost ready. The final step is to bend the corner of the base a little. Now let's move on to the leg.

We place a square of green paper in front of us like a diamond and connect the horizontal opposite corners in the middle. After this, we bend the resulting composition in half. Next you need to bend the base to the left. At this point the leg is ready.

By connecting the stem and bud, you will get a real tulip.

Creating flowers in such a simple way is interesting and exciting! Try it! And you will get real masterpieces that will delight you and your loved ones. And by making this pastime your hobby, you will be able to create very complex options, which will take days and even weeks of work.

Making figures from multi-colored modules will diversify leisure time and become common interest for family members. Even a novice master, having mastered the basics of origami, will be able to surprise others with exclusive crafts.

Origami is the oriental art of creating decorative figures from paper, which includes several types. Modular origami is its integral part.

Types of origami:

Name	Description
Modular	The craft is assembled from parts of the same size, which are folded in a certain way. Figures are obtained by nesting modules into each other. Glue is not used in their creation, but for strength in complex models, adhesive connections are allowed.
Simple	The figure is made from one sheet of paper. Suitable for development fine motor skills children's hands.
Wet folding	When working, the paper is moistened with water, which allows you to create crafts with smooth lines. Thick paper treated with water-soluble glue is suitable for this technique.
By pattern	Folding the figure according to the diagram. The drawing shows all the folds of the future model, special symbols. A convenient way to make complex crafts

There are at least 10 types of origami modules. Flat ones are used to create mosaics; three-dimensional parts are used to form balls and shapes. Modules in the shape of a trefoil and triangle are common. Pyramid-shaped blanks are used to create kusudama - bright balls.

Materials for work

The paper for modular origami is chosen to be durable, not glossy, to avoid unnecessary slipping. The paint on the folds should not rub off.

• office white and colored, quite durable and rough;
• stickers, writing blocks;
• Kami – Japanese origami paper;
• magazine matte;
• wrapping;
• gift (packaging);
• foil.

Colored school paper is not suitable for work; it is thin and turns white on the folds. Cardboard modules do not roll well. Newspapers are suitable for beginners, they are not durable and turn yellow over time.

Preparing for work

Before starting to create modular figures, they stock up on paper of the required colors and make modules. Triangular modules folded from rectangular sheets with an aspect ratio of 3:2.

Manufacturing:

• Fold the A4 sheet in half, then 3 more times. There were 32 rectangles on paper. Modules of the popular 1/32 size are assembled from them. If larger parts are needed, leave 8 or 16 parts.
• Cut the paper into rectangles with scissors or a stationery knife.
• Fold the part lengthwise, then widthwise. There is a control line in the middle.
• Fold the sides of the rectangle towards the middle, as when assembling an airplane, and turn the workpiece over to the other side.

• The extreme corners of the parts protruding from below are bent upward, to the base of the triangle.
• The lower part of the workpiece is raised. The result is a triangle.
• Bend the triangle along the midline. The module is ready.

The piece has 2 corners at the front and 2 pockets at the back. With their help, the modules are connected to each other.

Module assembly technique

The module when folded is a straight triangle. The hypotenuse is called the long side, the leg without pockets is called the short side.

The configuration of the craft depends on the method of connecting the modules:

• The corners of one triangle are respectively inserted into the pockets of the other. So, from several parts, a flat strip is obtained, which is used to make the tails, necks, and legs of the figures.
• The top of one triangle is inserted into the pocket of the second, then the top of the second is inserted into the pocket of the third. The connection is used to create long chains, the basis of figures.

• To connect 3 modules, the adjacent vertices of two parts are inserted into the pockets of the third.
• The rows are obtained by stringing a triangle onto adjacent corners of the parts of the bottom row. Depending on the scheme, the module is put on 1, 2 or 3 vertices.

The long side up method means that the module is put on with the hypotenuse forward, towards the assembler. Short side forward means that the triangle is strung with the leg forward. The usual method for assembling rows is with the long side facing up.

Paper flowers

Modular origami for beginners is mastered by creating simple shapes. Using this technique, you can recreate a flower or come up with your own image of a plant. Such crafts are made from modules measuring 1/32 so that the figure turns out graceful and close to the original.

They decorate festive table, given on March 8th or birthday. Large modules are used to make large flowers that decorate the room for a celebration.

Lotus or water lily

The lotus, made using the modular origami technique, consists of 6 green leaves on which a two-color bud with a core is placed. For work, 240 pink, 126 dark pink, 50 yellow and 318 green triangles are prepared.

Modular origami for beginners: step by step production lotus

Procedure:

1. They start by making diamond-shaped leaves. 2 elements are inserted into the first green module, 1 triangle is added in the remaining rows. After a strip of 7 triangles in each next row, their number is reduced by 1. To connect two leaves, use 4 additional modules, which are inserted reverse side. All 6 pieces are fastened together.
2. Similarly, 6 bud petals are made from pink triangles; the longest row of the workpiece consists of 5 modules.
3. The finished parts are laid out in a row and the petals are connected with the first dark pink module in the middle. Then they fill the rest of the space and close the two-color stripe into a ring. 3 rows are laid along the bottom of the flower, alternating light and dark triangles.
4. The yellow elements are used to make a core, 5-6 pieces in a row. The bud is placed on the leaves and the middle is inserted into it.

The bud can be made variegated or monochromatic, and rows of dark or light modules can be laid along the edge of the leaves. If you remove the core from a flower, the lotus will turn into a vase.

Lily

A variegated royal flower will be made from 230 orange and 50 brown blanks. The lily consists of 5 petals; long stamens made of paper or other materials are inserted in the middle of the flower. The stem is formed from 3 cocktail tubes.

Modular origami for beginners: step-by-step making of a lily

Procedure:

1. All petal modules are inserted into the pockets with the long side. The first 3 rows are made from orange modules, gradually connecting 2, 3 and 4 parts.
2. Add a brown element to the 4th row - 1 orange, 1 brown, 1 orange triangles. Along the edges, one corner of the modules of the previous row is left free.
3. The 5th row consists of 4 orange modules, the 2 outer parts are put on, capturing the free corners from the 3rd row so that the side of the petal is smooth.
4. The 6th row is assembled from 5 modules: orange, brown, orange, brown, orange. Row 7 is assembled from 6 orange parts.
5. In the 8th row, 4 orange and 3 brown modules alternate, starting and ending the row with yellow elements.
6. The 9th row consists of 6 orange triangles; to decrease in this and the next rows, the outer modules are placed on the 3 tops of the parts of the 8th row.
7. In the 10th row, 3 orange and 2 brown parts are placed in checkerboard pattern.
8. Row 11 is formed from 4 orange modules, row 12 - orange, brown, orange elements. Finish the petal with rows of 2 and 1 modules.
9. The finished petals are bent to resemble a living flower and connected at the base with brown parts. A wire is inserted into the stamens and passed through the middle of the lily.
10. For the stem, 3 tubes are secured with wire from the flower stamens and covered with corrugated paper. Leaves are placed on the stem.

A delicate lily will be made from white and pink modules. A flower made from details in contrasting shades looks original.

Narcissus

To make a daffodil, you need 16 white modules and a 2.5 cm wide strip of double-sided yellow paper for the core. A cocktail tube is used as a stem.

Modular origami for beginners: step-by-step making of a daffodil

Procedure:

1. Lay out 8 modules in a circle, with the short side towards the middle and attach the remaining 8 triangles to them. To do this, the corners of two adjacent parts of the 1st row are inserted in a circle into the pockets of the same module of the external chain. It turned out to be a two-row ring, these are petals.
2. One side yellow paper strip cut into fringe, rolled into a tube and lightly sealed. The finished center is inserted into the head of the daffodil.
3. A cocktail straw is wrapped in a green stripe. corrugated paper and glue it, 1 cm does not reach the edge of the tube.
4. The free end of the tube is cut into 5 parts, coated with glue and inserted into the flower.
5. A strip of corrugated paper is glued in half, allowed to dry, and a long sheet is cut out and glued to the stem.

Several daffodils will make a spring bouquet for your mother, grandmother or sister.

Rose

The rose is made from 95 modules and a cocktail straw. You can take juice tubes, then you need to insert them one into the other to lengthen them.

Procedure:

1. The bud is collected from top to bottom, gradually narrowing the figure. Rows 1, 2 and 3 consist of 15 triangles. Elements of the 2nd row are put on with the long side up, and 3rd rows - with the short side up. A three-row ring is formed, this is the top of the flower.
2. The 4th row continues in a circle, the triangles are put on the 3 corners of the module of the previous row. The 5th, 6th, 7th rows consist of 10 elements connected to the previous row in the usual way - 1 module per 2 adjacent ends.
3. 10 modules are inserted into the lower part of the flower, like petals. For reliability they are glued.

The straw is wrapped in a strip of paper in a spiral and sealed. At the top of the stem, a thickening is formed from paper, equal in diameter to the hole in the rose. Leaves are cut out of paper and glued to the stem. Coat the top of the stem with glue, insert it into the bud, and press for a few seconds.

White rose

A snow-white flower will be made from 110 modules measuring 1/32. Regular office paper will do.

Procedure:

1. Assemble a ring of 3 rows of 18 modules each. In rows 1 and 3 they are placed with the short side forward. Parts of row 2 – long side up.
2. In the 4th row, each element is put on 3 tails of the parts of the bottom row. Then assemble 2 rows of 12 pieces and 1 row of 12 triangles, short first.
3. In the last row, 8 triangles are placed with the short side facing out, inserting them into the 3 corners of the previous strip.

The bud is ready, the cocktail tube is wrapped in a strip of paper, and the cut out leaves are glued on. The rose is placed on a stem coated with glue.

Swan

Modular origami for beginners will interest people who want to create volumetric figures birds and animals. To make a swan you will need 458 white modules and 1 red one for the beak. A large figure will be made from triangles measuring 1/16. For strength, the tops of the parts are lubricated with glue.

Procedure:

1. Assembly begins with the body of the bird. In the 1st row, 30 triangles are placed with the long side outward; 30 modules of the 2nd and 3rd rows are put on them with the short side outward. The corners of 2 adjacent modules fit into the pockets of one triangle of the next row. The strip is closed into a ring and the 4th and 5th rows are laid in the same way. The figure is turned inside out, resulting in a bowl-shaped piece. Add a 6th row of 30 pieces.
2. The wings are formed from the 7th row. Leave 2 tops of adjacent triangles free - this is the place for the neck. 12 modules are put on to the left and right of the gap. There is a free area at the back for the tail. They assemble the wings, for which in each subsequent level the number of parts is reduced by 1. The last row consists of 1 module. The wings are arched to create the effect of a bird taking off.
3. The tail is made similarly to the wings, the number of modules in the rows is reduced to 1 triangle.
4. The neck consists of 31 pieces; it is assembled from the beak by inserting the corners of one module into the pockets of another. To prevent the beak from looking double, it is glued. During the assembly process, the bird's neck is bent. The eyes are glued next to the swan's beak and the neck is inserted into the space between the wings.

If you make a beak and a crown from golden paper, you will get a swan princess. Looks presentable black bird with wings edged with white stripes and a butterfly on the chest. Children love colorful swans.

Watermelon

To create a watermelon slice you need 114 red, 66 green, 17 white and 16 black blanks. They are inserted with the long side up, except for the first row - its parts are placed with the short side up.

Procedure:

1. Start assembly with 15 green modules. Rows 2, 3, 4 are assembled from green triangles of 14, 15, 16 pieces.
2. In the 5th row: 2 green, 13 white, 2 green. 1 green triangle is placed at the beginning and at the end of the 6th row, 1 white triangle is inserted next to them, the middle of the chain consists of 12 red modules. Row 7 begins and ends with 1 white element, with 13 red elements placed inside.
3. Row 8 consists of 14 modules, red ones alternate with black ones. Row 9 is formed from 13 red ones, the following rows are reduced by 1 module.
4. In rows 10 and 12, red and black parts are placed sequentially, according to the pattern. Row 11 and 13 to 21 are assembled from red modules. The last 21 row consists of 1 triangle.

Hare

To make a hare in a sweater, fold 402 white and 120 multi-colored modules. For a figure without clothes, take 520 parts of the same color.

Procedure:

1. For the first 3 rows, take 24 parts each, form a three-row strip and close them into a ring. Turn it inside out, resulting in a workpiece in the form of a wide vessel.
2. The 4th row is assembled from 24 colored parts - the beginning of the sweater. They are not inserted all the way, but are secured higher and the lower corner is moved forward to add volume. 4 more lanes are laid in the same way.
3. For 1 row of the head, take 24 triangles and put them on with the short side forward. In the second row, 6 parts are added. In this and the next 6 rows, the parts are strung with the long side up.
4. The ear begins to be assembled from 6 triangles. They are connected to the last row of the head with the short base forward. Row 2 consists of 5, row 3 – of 6 parts. The outer triangles are strung on the last vertices of the 2 lower modules. This is how 7 rows are assembled. Row 8 consists of 5 triangles, the outer parts are placed on the 3 tops of row 7. Row 9 – 4 triangles, 2 middle ones are placed above the 2 outer ones. They skip 2 head modules and assemble another ear.

Cut out and glue on the hare's eyes and nose, collar and bow tie. Arms are cut out of cardboard and attached to the sides of the body. If you cut a strip of paper into a fringe, twist it onto a pencil and glue it, you get bangs.

Penguin

Modular origami for beginners allows you to practice this technique with early age. For example, a child can assemble a penguin. To assemble this bird, take 129 black, 1 orange and 76 white modules.

Sequence of actions:

1. Row 1 is assembled from 10 black and 6 white parts, installed with the short side up. In the 2nd row there are 7 white and 10 black, they are placed with the long side up.
2. In the 3rd row, 6 white and 10 black blanks are put on with the long base up. Roll the three-row strip into a ring and form a bowl.
3. In the 4th row - 9 black and 7 white, in the 5th row - 10 black and 6 white, in the 6th row - 7 white and 9 black triangles. Row 7 - 10 black and 6 white elements.
4. Row 8 - beginning of the head, 9 black and 7 white parts. In the 9th row there are 10 black and 6 white parts. In the 10th row there are 9 black and 7 white blanks.
5. Row 11 – 10 black and 6 white, the next strip is similar to row 10. In the 13th row there are 11 black modules. The top of the figure is compressed.

An orange beak module is inserted in the center of the head, and black triangles - wings - are placed on the sides. Cut out and glue the penguin's eyes.

Owl

A small two-color owl is assembled from 62 white, 7 orange, 157 blue and 2 black modules.

Procedure:

1. Row 1 – 13 blue and 5 white triangles, short side first. White blanks are placed between blue ones, this is the beginning of the chest. Row 2 is formed from 6 white and 12 triangles with the short base forward and completes the ring.
2. In the 3rd row, 5 white and 13 blue parts are placed with the short base forward.
3. In rows 4, 5, 6, the parts are placed with the long base facing up. Row 4 – 6 white and 12 blue, Row 5 – 5 white and 13 blue, Row 6 – 6 white and 12 blue triangles.
4. Row 7 is laid from 5 white and 13 blue parts with the short base forward.
5. In the 8th row, 2 central white modules are placed with the short side forward, 4 white and 12 blue - with the long base forward.
6. In the 9th row, an orange triangle-beak is inserted in the center of the white area, to the right and left of it are 2 white and 13 blue parts.
7. In the 10th row, 2 white triangles are placed in the middle, 1 white and 1 black element are inserted on either side of them, and continued with 12 blue triangles. In the 10th and subsequent rows, the triangles are put on with the long side forward.
8. In the 11th row, 1 blue element is placed above the beak. On both sides of it, 2 white modules are laid. The row ends with 13 blue back triangles.
9. The 12th row consists of 8 blue elements located in the center of the figure. To make the ears, 3 blue parts are hung on the sides of this row. Then 1 blue triangle is placed on them.

From below the bird is inserted 2 paws, consisting of 3 orange triangles. At the back are attached 2 blue parts - a tail. The wings are assembled from 3 modules and attached to the sides of the owl.

Crane

To make a white bird with black plumage and a black neck, you need 118 white, 84 black and 9 red modules. The parts are glued together for strength.

Procedure:

1. Assembly begins from the base of the neck. 2 white parts are inserted sequentially, with corners into the pockets. Row 2 consists of 2 modules, row 3 – 1 triangle.
2. Wings are formed to the left and right of the base, 3 rows of 10 modules each. The body is filled, alternating 1 and 2 parts. The tail rows consist of 4, 3, 2 and 1 triangles. To obtain plumage, 2 rows are laid along the wings, and 8 black elements along the tail. The edges of the wings are decorated with three rows of 3 black parts.
3. The tail is folded from black triangles according to the scheme 3, 2, 4 and connected to the body of the bird.
4. The neck consists of 11 black parts, inserted one into another. At the end there is a white module turned in the other direction - this is the head. Add a red triangle - beak. Attach the neck to the crane in the designated place.
5. The legs are assembled from 3 black, 5 white and 4 red modules. The lower red part is put on the other side for stability.

Eyes are glued or painted on the crane. Decorate the figure with a bow and a hat.

Rooster

The rooster craft is made from 11 yellow, 34 red, 185 orange, 66 green modules measuring 1/32 and 4 red modules measuring 1/64. To prevent the figure from falling apart, the joints of the blanks are glued.

Procedure:

1. Connect 3 rows of 11 orange parts, roll them into a ring and lay another 7 rows. To form the chest and neck, add a row of 6 triangles, then continue with the pattern 5-4-5-4-3-4-3-2-3-2-3-2-3-2-1-2-1. The neck is compressed and arched.
2. For the wings, green modules are assembled in rows of 3-4-3-2-1-2-1 pieces. The legs are made from 3 yellow pieces, dropping the corners into the pockets of the next triangle. Add 2 modules, which are inserted with both tops into 1 pocket of the last module. The legs are inserted from below the body.
3. The head is formed from 3 orange modules, connecting them in series, the comb is formed from 3 red ones. The comb is placed on the head and a yellow beak module is put on, which holds the parts together. A red triangle-beard is added to the bottom. Connect the head to the neck of the bird.

Make 5 colored tail feathers, 17 modules each. The wings are glued to the base of the rooster, and the tail is inserted.

Chick

To make a chick, 207 yellow and 6 red modules are prepared. For the beak you need 1 red triangle, half the size of the main parts.

Procedure:

1. Assemble a ring of 2 rows of 16 modules each, add 5 more such rows.
2. Row 8 consists of 16 pieces, put on with the short side forward to separate the body from the head. Lay 4 more rows of 16 pieces, long sides forward.
3. The last row consists of 10 modules, put on 2 or 3 corners of the parts of the bottom row. The top of the head is compressed to give it roundness.
4. The wings are assembled from two modules and glued to the sides of the chicken, a tail from 1 triangle is added.
5. The paws are made from 3 red modules, the tops of one are inserted into the pockets of the other 2 and attached to the bottom of the body.

Glue the chick's eyes and insert the beak. Cut the paper into fringe and form a chicken hairstyle.

Snake

A snake from modules is made curved or straight. The head and tail are assembled in the same way, but the production of the body differs in the technique and number of parts. For a straight snake you will need 237 triangles, for a curved one you will need 251 modules.

Procedure:

1. Start assembly from the tail. 2 modules are inserted into the pockets of the first triangle with both tops and 8 rows are continued, alternating 1 and 2 elements. The lateral corners of the tail are hidden.
2. Row 9 consists of 3, row 10 - of 2, and row 11 - of 3 modules. The straight snake continues to be assembled, alternating 2 and 3 elements in rows.
3. The bend of the snake is achieved by shifting the rows of modules. In the 12th row, 3 triangles are shifted to the right so that the extreme corner of the module remains free. The 13th row consists of 3 parts, put on without displacement. The next 3 rows are laid with a shift, 3 modules in a chain. In the 18th row, 3 parts are placed straight, the 19th row is assembled with a shift. In row 20 there are 4 modules. The result was one twist of the body.
4. Similarly, move rows from 21 to 25 to the left, collecting 3-4-3-4-4 parts in them. Then offset rows of 4 modules are assembled. Turns to the right or left are made from rows 35 to 38, from rows 47 to 50. The last turn from rows 57 to 58 goes to the head. In row 57 there are 3 modules, in row 58 there are 4 triangles.
5. Snake heads are collected in the same way. Lay 2 chains of 4 modules each, then according to the pattern 3, 4, 3, 2, 1. This is the lower part, a forked paper tongue is attached to it.
6. For the upper jaw, 5 modules are placed on the lower part with pockets at the top, leaving the extreme corners of the side triangles free. The jaw is assembled according to the 5-4-5-4-5-4-3-2 pattern.

The head is connected to the body. Small black eye modules are inserted.

Stork

To make a stork sitting in a nest, you need 40 black, 222 white and 104 brown modules. The beak for the bird is cut out of red paper.

Procedure:

1. Assemble a chain of 3 rows, 9 modules each, and close it in a circle. Turn it inside out and add 3 more rows.
2. Row 7 consists of 11 elements, 4 of which are put on 1 corner, and 7 - on 2 corners of the bottom row.
3. Rows 8 and 9 are assembled from 11 triangles; row 10 contains 12 modules.
4. On the body, choose a place for the chest and put on 4 parts. Lay 3 rows on top according to the pattern 3, 2, 1. Fold the corner of the chest up.
5. For the wing, 16 modules are connected, the corner of one is inserted into the pocket of the other. Row 2 consists of 15, row 3 – of 14 modules.
6. The 4th row of the wing is assembled from 12 black triangles. Row 5 – 6 black, arranged in three pairs at equal distances.
7. 4 black modules are inserted into the base of the body - this is the tail.
8. The neck is assembled from 23 white modules and curved. Glue on the beak and eyes.
9. They make a nest - a brown circle of 3 rows, 26 modules in each.

The wings are glued to the sides of the body, the neck is connected to the chest. The stork is placed on the nest.

Dog

A two-color dog can be assembled from 37 white and 98 yellow modules. It is better to buy plastic eyes and nose. The modules are connected with the long side up.

Procedure:

1. For the base, assemble a ring of 2 rows, 8 yellow modules in each. In the 3rd row there are 7 yellow triangles and 1 white for the beginning of the chest.
2. Row 4 – 6 yellow and 2 white.
3. In row 5, 2 modules are added on the chest, making a total of 4 white and 5 yellow. This is how 2 more rows are collected.
4. In the 8th row, 9 modules are put on with the short side out. The next 4 rows of the head are assembled from 9 triangles with the long side up, forming the dog's white muzzle.
5. In the 13th row there are 4 yellow modules. They are placed above the puppy's muzzle with the short side forward - this is the dog's forehead.
6. The ear is assembled from 2 modules, the top of one part is inserted into the pocket of the other so that a curved piece is obtained.
7. The tail consists of 3 yellow and 1 white modules connected in series. The upper paws are assembled from 2 yellow and 1 white triangles.

Paws, ears and tail are inserted between the modules of the dog’s body. Eyes, a nose and a pink paper tongue are glued onto the face.

Peacock

Modular origami for beginners with the help of master classes allows you to learn how to make complex figures. Peacock is one of these crafts.

To create the royal bird, the following modules are prepared: 252 green, 128 purple, 217 blue, 45 white, 1 blue, 15 orange. The model's tail is wide open and consists of individual bright feathers.

Procedure:

• To assemble the feather, 3 purple modules are connected in series. Then put on 2 blue ones and add 2 more blue triangles to their extreme tops. An orange module folded into a peephole is glued between them.
• An arch is assembled from 9 green modules, where 2 chains of 4 triangles are connected at the top by a module. The sides of the pen are jagged.
• The arch is connected to the feather blank, attaching it to the two inner corners of the blue modules. The result is a feather on a short stem; 7 of them are made.
• A long feather is made in the same way, only the leg and arch consist of 11 modules. You need 8 of these blanks.
• For the body, collect 3 rows of 15 white triangles and connect them into a ring, turning them inside out. Add 8 rows, 15 blue triangles each.
• Determine the place for the paws and insert 2 green parts. The third blue row is counted down the back and 10 green modules are fixed in it - this is the place of the tail.

• A corner blank is made from 3 green triangles by inserting the vertices of one into the pockets of 2 triangles. 9 such parts are assembled and placed on 10 tail base modules. A row of 17 purple modules is laid on top with the short side facing the body.
• 11 green modules are attached below this fan, and 10 corner green blanks are put on them, as in the previous stage. A row of 19 green triangles is collected on top. There are 2 fans at the bottom of the back.
• Determine the place for the neck and put on 3 blue modules in the first row and 4 in the second. The next rows follow the pattern 3-4-3-2-3-2-3-2-1.
• A neck is assembled from 7 blue triangles, lowering the corners of the next element into the pockets of the previous one. Add a head - a blue module and connect the neck to the body.
• Short feathers are attached to the first part of the tail, along the purple row. Long feathers are placed on the back fan. 2 purple modules are inserted into the head - this is the crest.

Cut out and glue the peacock's eyes. A paper crown is placed on the crest.

Cat

To make a sitting cat, you need 386 modules of any color. All parts of the figure are assembled separately and connected at the end of the work.

Procedure:

1. For the base of the body, assemble a three-row chain of 19 modules in a row and connect it into a circle, turning it inside out.
2. Add 2 similar rows, inserting the elements with the long side out. Rows 6 to 10 consist of 16 triangles, rows 11 to 13 contain 13 modules.
3. The base of the head consists of 3 rows of 16 triangles connected into a ring. The workpiece is turned inside out and another 3 rows of 16 modules are laid, then 3 rows of 13 elements each. Glue the head to the body.
4. Assembly of the paw starts from the bottom with 3 parts and continues according to the scheme 2, 1, 2, 1, 2,1. They make 2 legs and glue them to the front of the body.
5. The ears are assembled from 3, 2, 1 triangles. The free side corners are glued to create a sharp shape.
6. The tail consists of 13 modules.

The ears are glued onto the head, the tail is glued with the flat side so that it peeks out from behind the cat’s body. The face is decorated with eyes, mustache and nose. A pink tongue is inserted.

Dragon

Modular origami offers dozens of options for creating dragons. Beginning craftsmen will be interested in the technique of making this fairy-tale character. Chinese dragon will be made from 473 red, 110 yellow and 18 black modules. There will be a yellow stripe running down its belly.

Procedure:

1. Assembly of the body begins with 3 red modules, located with the long side up. In the 2nd row, in the center, put on 2 yellow triangles with the short side up, and on the edges - 2 red modules, each on one top.
2. In the 3rd row - 3 red triangles, 4 are collected similarly to the 2nd row, then there is a strip of 3 pieces. This is how rows from 6 to 110 are alternated, resulting in 55 three-module and four-module rows. The dragon's body is bent.
3. The paw consists of the foot and the upper part. The top is formed according to the scheme 2, 3, 2, 1.
4. In the first 6 rows of feet in chains, 2 and 3 parts are changed. In row 7 there are 3 modules, in row 8 they are put on a black triangle. Assemble 4 upper and 4 lower parts.
5. 1 row of the head consists of 4 pieces, 5 triangles are put on them. Then alternate rows according to the pattern 4, 3, 4,5,4. Row 8 consists of 3 modules located in the middle with the short side forward, and 2 black ones, which are placed at the edges at one corner, with the long side up.
6. In the 9th row in the middle there are 4 parts, short side forward, and 2 black at the edges. The 3 central modules of row 10 are inserted with the long side up. On the 1st and 3rd elements of the 10th row, horns are formed, consisting of 1, 1 and 2 triangles. They are completed by 4 modules, assembled one into one.
7. The lower part of the head is assembled according to the 2-3-4-3-2-3 pattern. Roll up 4 small white modules - teeth.
8. The beginning of the tail consists of 6 sequentially nested triangles; from the 7th row it is expanded, alternating 1 and 2 modules. From rows 15 to 22, the tail is assembled in two-module and three-module chains. Its end is decorated with black elements, gluing them in the form of a Christmas tree. Attach the tail to the body.
9. The parts of the head are connected, the teeth are inserted into the jaws from above and below, and the eyes are glued. Assemble 4 legs.

The head and paws are glued to the body. There are 10 black modules on the back; these are dragon spikes.

Rainbow Vase

The colorful stripes of the rainbow vase are arranged vertically and taper at the top. The effect of color transition from one to another is created by shifting the modules. For the craft, prepare 320 triangles of red, orange, yellow, green, blue, and purple.

Procedure:

1. In 1 row there are 12 modules - 2 red, 2 orange, 3 yellow and then, like on a rainbow. In the 2nd row, the triangles are shifted to the right, capturing the lower tops of a different color. They make only 3 rows, resulting in a blank of 6 colors. 6 such structures are collected and closed into a ring - this is the base of the vase.
2. Lay out 11 rows according to the pattern, shifting each pair of modules 1 corner to the right. The craft takes the shape of a round vessel, its walls are carefully adjusted.
3. The neck of the vase is formed from the 12th row, in which half as many triangles are laid. Between parts of the same color, insert 1 module of the same color and make 1 more row.
4. In the following rows, the number of modules does not change, but in each chain they are shifted 1 corner to the left. So the vase is assembled to the end.

In addition to a pleasant pastime, practicing modular origami brings real benefits. A novice master can decorate a room for a holiday and diversify the table setting. And his relatives and friends will not be left without original gift.

Article format: Natalie Podolskaya

Video about modular origami

Modular origami for beginners - how to make a 1/32 module:

Folding modular origami flowers is the most interesting activity. These classes are also suitable for educational process and for home creativity. Origami in the 21st century is becoming increasingly popular all over the world.

This type of creativity is a great way to bring a team or family together, as it allows everyone to contribute to the creation of beauty.

Origami – Snowdrops in a vase

In early spring, its first messengers, snowdrops, bloom. It is suggested that you do not pick these wonderful flowers, but make them yourself.

Flowers and their assembly technique

The technique of assembling such flowers refers to modular origami. Each flower consists of three identical modules. They are made from white office paper or from square stickers. To make a flower you will also need thin flexible wire and green corrugated paper.

1. Take three square pieces of paper with a side of 4 cm and fold them into Trefoil modules. If you are folding this module for the first time, it is better to practice on a larger sheet of paper first.
2. Apply glue to the left small petal of one module.
3. Insert it into the pocket under the right blade of the second module.
4. Glue the third module in the same way.
5. Close the modules into a ring by gluing the outer petal into the pocket on the other side. There should be a small hole left between the modules.

6. Take a wire 23 cm long and a strip of corrugated paper 1 cm wide. Stepping 1 cm from the edge of the wire, wind a small roller of paper.

7. Bend the free end of the wire as shown in the photo.

8. Rewind the paper over the folded end.

Continue winding the paper until all the wire is covered.

9. Insert the thin end of the wire into the flower and pass through it, securing the flower to the thickening. At the base of the flower, wrap another strip of green paper measuring 0.5 x 15 cm. It is better to cut the strip across the corrugation lines, so it will stretch better. Glue a small leaf cut from a strip measuring 1 x 6 cm and bend the stem.

10. Cut out the remaining leaves. So that they are more rigid and keep their shape. It is better to fold corrugated paper in half and glue it together.

11. Make a few more flowers and collect a bouquet. It is better to secure it with an elastic band, and then tie it with a ribbon or place it in a vase.

Vase and its assembly technique

For the vase you will need white, yellow and green triangular modules.

1. Prepare 20 white modules for the first row and 20 yellow ones for the second. Connect them as shown in the photo.
2. When there are 4 modules in the first and second row, start assembling the third row. Every 4 yellow modules, put on 1 white one with the short side facing out.

3. Having assembled the third row, close the chain of modules into a ring.

4. Turn the ring so that the yellow modules are facing with the short sides facing out. At first, the ring may not hold its shape. Hold it with your hands while assembling the fourth row. Start the fourth row by attaching 2 white ones to a white module with the long sides facing out (dsn). Then insert 3 yellow ones with the short sides facing out (xn). Then repeat the sequence.

5 Start the fifth row by attaching white, green and white modules (dsn) to 2 white modules. Next, insert 2 yellow ones (ksn). Repeat the sequence.

7. In the seventh row, repeat the sequence: white, green, yellow, green, white modules (dsn).

8. In the eighth row, repeat the sequence: 2 green, 3 white modules (dsn).

9. In the ninth row, repeat the sequence: 1 green, 4 white modules (dsn). The result is the lower part of the vase. Give it a round shape.

10. Connect 7 green modules by inserting two corners of one row into two pockets of the other. In total, make 4 green blanks and 4 white ones.

11. Place the resulting column blanks onto the bottom of the vase with the short sides of the modules facing out. Place the green columns on the green modules of the ninth row, and the white ones between the two middle white modules.

12. Make an arched connection between the posts. Put on 5 modules as shown in the photo. Arches can be assembled separately and then put on or built up gradually, starting from green and white posts on both sides.

13. Make 8 arches in total. This will take 40 white modules.

14. Complete the vase with a row of 32 green pieces. Put them on either 2 corners or 1.

Origami flowers (Snowdrops in a vase) ready.

Origami – Vase with fuchsias

Such a modular bouquet in a vase will delight you with its beauty for a long time.

Flowers: instructions with step-by-step assembly

Fuchsia flowers are made according to the same principle as snowdrops.

1. Complete 3 pink Trefoil modules. Connect them into a flower, as when making a snowdrop.
2. A characteristic feature of fuchsia is its long pistil and stamens. Complete them. Take a thin flexible wire (11 - 13 cm). Wrap it with a strip of pink crepe paper and bend the tip. Approximately in the middle of the part, glue rolled strips of paper.
3. Place a flower on the bottom. Wrap a strip of green paper around the base of the flower.
4. Make 5 of these flowers on a thin wire. Cut out leaves with small stems from green paper. Make veins on them by folding.

5. Take a thicker wire and wrap flowers and leaves to it with a strip of paper. Fuchsia stems are pink, light brown, light green. They usually differ in color from the leaves.

6. Fuchsia can be two-color. To make such a flower, make not one, but two blanks from the Trefoil modules, different in color. When assembling the flower, put them on one by one.

7. You can make fuchsia with a “terry skirt”. Cut 2-3 circles from corrugated paper and make a hole in the center. Place the circles on the wire with the stamens glued, crimp it around it and glue it. Then put on the flower.

Vase: assembly instructions

For the vase, prepare blue, white and pink modules. The color of the vase depends on what flowers will be in it.

1. Prepare 54 modules (18 x 3) for the first three rows. Assemble the first and second row, placing the modules with the long sides facing up. In the third row, place the modules with the short sides facing up.

2. Close the chain of three rows into a ring.

3. Turn the ring over and continue putting the modules on, with the long sides facing out. Complete three rows of 18 modules.

4. In the seventh row, increase the number of modules by 6, putting not one, but two modules on a couple of corners.

5. In rows eight to fifteen, lay out 24 modules. Create a colored pattern on the vase from modules to suit your taste.

6. In the sixteenth row, fasten 24 modules with the short sides outward (xn). The result is the lower part of the vase. Give it a round shape.

7. Connect 6 modules by inserting two corners of one into two pockets of the other. Make 12 of these blanks in total.

8. Place the resulting column blanks onto the bottom of the vase with the short sides of the modules facing out. Leave a space of a couple of corners between the posts.

9. Place 2 modules (ksn) on each column.

10. Finally, complete three rows of 24 modules (xn), alternating colors.

Paper origami (Vase with fuchsias) is ready.

Video modular paper origami (Vase)

The video shows an example of assembly and a technique for assembling modules. If you understand the assembly in the video, you will be able to assemble the vases in this article.

Modular origami: How to make a flower for beginners (video)

The example of assembling a flower from modules in the video is clear and simple. You can do more and better because your knowledge grows. Good luck to you!

Some craftsmen make real masterpiece flowers from paper. Looking at them, it seems that we are unlikely to be able to do something similar. But in fact, there are options for making paper flowers that even children can master. And the option presented below is just that - simple, not requiring much effort, time and patience.

What you need to make a paper flower:

Colored paper (in in this case- very convenient colored leaves for notes);
glue stick.

Step 1. Making a petal

We will form a flower petal from a 9x9 square. In this case, blocks with sticky notes are indispensable!

Fold the square in half diagonally.

The corners of the resulting triangle are aligned with its vertex.

We get a rhombus.

We wrap the edges of the rhombus towards the central axis.

We straighten the resulting workpiece.

We turn out the “tails” on both sides as shown in the photo.

We get this design.

We bend the “ears” extending beyond the edge of the diamond inward.

We wrap the edges inward along the existing line.

We wrap the petal, connecting the folded edges.

Apply glue to one of the sides to be glued.

Glue it together and get a petal.

Petals can be from 5 to 10-15.

Step 2. Glue the petals together.

Coat the end side of the petal with glue.

Glue the two petals together.

We glue all the petals one by one and get this paper flower.

The final look of the craft. Photo 1.

The final look of the craft. Photo 2.

This flower using the modular origami technique is very easy to make with your own hands. In this case, you can vary the number of petals, glue together the “stamens” inside the flower, and paint them in a contrasting color. If desired, you can add a bead to the center. Such a paper flower can become the basis for making topiary or an original element of gift wrapping. And if you like other flowers, then do not rush to leave our site, because we will show you how to make tulips from paper. In our opinion, the craft turns out very beautiful!