Crocheting a belt, a step-by-step selection of patterns and descriptions of the work that is attached, will work out very quickly. We suggest crocheting a belt with posts of different heights. You can decorate the belt with flowers made from striped fabric in two colors to match the stripes on the knitted belt.
We crochet a stylish belt: diagram and description of work
In order to knit a belt you will need the following materials:
- Cotton yarn in dark blue, red and white (50 g each);
- Hook No. 3;
- Fabric with red and blue stripes (size for each strip is 65 by 65 cm);
- Safety pins - 2 pcs.
The pattern of this knitting option is carried out according to the principle described below.
First, double crochets are made: in the first row, the double crochet is knitted into the chain stitch of the gacha chain: one double crochet in the fourth chain crochet from the hook; in subsequent rows, the first double crochet must be replaced with three chain crochets.
The diagram shows the knitting of motifs A and B.
Motif A: after the yarn over is completed, insert the hook with a movement away from you between the double crochets of the previous row and grab the leg of the left double crochet from behind, bring it out behind it with a movement toward you, grab the working thread and pull it behind the leg of the double crochet, then pull the double crochet yarn over
Motif B: we make a yarn over, insert the hook with a movement towards ourselves and grab the leg of the double crochet in front, bring it out in front of it with a movement away from us, then we grab the working thread and stretch it in front of the leg of the double crochet, perform a double crochet.
Let's make decorative flowers. From striped fabric you need to cut out two bias tapes 80 cm long and 12 cm wide. Each one needs to be folded in half with the wrong side inward and along the open edges. Using a machine we make easy assembly. Excess fabric along the stitching must be cut off. On the side that is gathered, it is necessary to twist and sew tightly.
We cut out two 0.5 cm circles and fold the edges. We sew decorative pins to the flowers.
This belt will be a great addition to skirts, jeans, and can be worn on a dress.
Let's try to crochet another version of the belt from tied rings
Another very interesting option is to create a belt from tied rings.
To work you will need:
- Yarn – 100g;
- Plastic rings for tying;
- Hook - No. 2.
Let's get to work. We will tie half of the ring with a single crochet, then we will knit a chain of 20 chain stitches as shown in the photo.
We will also tie half of the next ring and again tie a chain of air loops. Thus, we will connect the rings to the required length of the belt. We tie the very last ring entirely, then we knit a chain of 19 single crochets with air loops. It turns out like this blank from rings tied together.
Along the edges of the belt you can attach 4 chains made of 100 air loops; you need it for tying. The end of each chain must be secured with a knot. Now the crocheted belt with rings is ready.
This belt is perfect for knitted or knitted items.
A belt is a very trendy accessory always and everywhere, it is a stylish decoration for things and it is simply impossible to imagine your wardrobe without belts.
At the end of the master class, we offer several interesting videos that present interesting ideas on crocheting belts with detailed descriptions. Try to create new and interesting things with your own hands, which will certainly delight you with their appearance.
Video on the topic of the article
Good afternoon, dear needlewomen! Today I would like to tell you about crocheting a belt. Not just tell, but show a master class on making beautiful belts. It's summer now and this information will be very relevant. Finally, I'll also provide some links to interesting knitting tutorials on other sites. This is an updated entry and the master class is already abundantly presented on the Internet. The author, in my opinion, is Tanya Sulzhenko, link here
http://s30987451345.mirtesen.ru/blog/43908102119/Poyas-kryuchkom.-Master-klass.
So let's get started. And at the very beginning of our creative journey we will need plastic rings. We take what we want. We will “dance” around them.
We tie our rings first to half. We knit the connection between the rings with an air chain.
We make the length of the belt according to our size.
After the desired length is knitted on one side, we begin tying the second side of the rings.
As a result, we will have such a thin belt.
Now we simply tie the rings with any pattern in a circle. Here you can also follow the principle of stages and knit first one half of the belt, and then the other.
This is the kind of openwork belt we will get.
Finally, we tie the straps for the fastener. Our belt is ready!
Well, these are the belts in their finished form. Create and be irresistible! Good luck with your crafting!
Pink belt from Osinka under the nickname Redredcat
A very interesting belt model, from an aspen needlewoman under the nickname Redredcat.
http://klubokdel.ru/vjazanye-aksessuary/676-poyas-kryuchkom.html
Knitted belt and phone case
Well, here there is a double benefit - a belt and a phone case in addition. See knitting description at
White belt for competition
The belt may not be very intricate in style and execution, but it is knitted by a living person, needlewoman Ekaterina Mikhailova. This is not just work in a magazine, it is the creation of skillful hands. Read the knitting description at the link
Knitted floral belt
Well, one more belt - with floral motifs. Bright and beautiful. So summery that it will suit any event, maybe even Kupala! Or maybe just for going to work on a summer day. Read the description of knitting at
Crocheting a belt, a step-by-step selection of patterns and descriptions of the work that is attached, will work out very quickly. We suggest crocheting a belt with posts of different heights. You can decorate the belt with flowers made from striped fabric in two colors to match the stripes on the knitted belt.
We crochet a stylish belt: diagram and description of work
In order to knit a belt you will need the following materials:
- Cotton yarn in dark blue, red and white (50 g each);
- Hook No. 3;
- Fabric with red and blue stripes (size for each strip is 65 by 65 cm);
- Safety pins - 2 pcs.
The pattern of this knitting option is carried out according to the principle described below.
First, double crochets are made: in the first row, the double crochet is knitted into the chain stitch of the gacha chain: one double crochet in the fourth chain crochet from the hook; in subsequent rows, the first double crochet must be replaced with three chain crochets.
The diagram shows the knitting of motifs A and B.
Motif A: after the yarn over is completed, insert the hook with a movement away from you between the double crochets of the previous row and grab the leg of the left double crochet from behind, bring it out behind it with a movement toward you, grab the working thread and pull it behind the leg of the double crochet, then pull the double crochet yarn over
Motif B: we make a yarn over, insert the hook with a movement towards ourselves and grab the leg of the double crochet in front, bring it out in front of it with a movement away from us, then we grab the working thread and stretch it in front of the leg of the double crochet, perform a double crochet.
Let's make decorative flowers. From striped fabric you need to cut out two bias tapes 80 cm long and 12 cm wide. Each one needs to be folded in half with the wrong side inward and along the open edges. Using a machine we make easy assembly. Excess fabric along the stitching must be cut off. On the side that is gathered, it is necessary to twist and sew tightly.
We cut out two 0.5 cm circles and fold the edges. We sew decorative pins to the flowers.
This belt will be a great addition to skirts, jeans, and can be worn on a dress.
Let's try to crochet another version of the belt from tied rings
Another very interesting option is to create a belt from tied rings.
To work you will need:
- Yarn – 100g;
- Plastic rings for tying;
- Hook - No. 2.
Let's get to work. We will tie half of the ring with a single crochet, then we will knit a chain of 20 chain stitches as shown in the photo.
We will also tie half of the next ring and again tie a chain of air loops. Thus, we will connect the rings to the required length of the belt. We tie the very last ring entirely, then we knit a chain of 19 single crochets with air loops. It turns out like this blank from rings tied together.
Along the edges of the belt you can attach 4 chains made of 100 air loops; you need it for tying. The end of each chain must be secured with a knot. Now the crocheted belt with rings is ready.
This belt is perfect for knitted or knitted items.
A belt is a very trendy accessory always and everywhere, it is a stylish decoration for things and it is simply impossible to imagine your wardrobe without belts.
At the end of the master class, we offer several interesting videos that present interesting ideas on crocheting belts with detailed descriptions. Try to create new and interesting things with your own hands, which will certainly delight you with their appearance.
Video on the topic of the article
Knitting belts is one of the most popular activities among craftswomen who know how to crochet. The use of various techniques allows us to create rigid and dense accessories with a long service life.
This article offers interesting crocheted belts with diagrams and descriptions, some of them perform a purely decorative function, others can successfully replace a regular belt.
What yarn is suitable for making a belt?
When choosing a material, you should be guided by the purpose of the future product. Below you can see different crochet belts, diagrams and descriptions, photos and even a master class. Moreover, the appearance and scope of application of each of these items are completely different.
Narrow lace belts, as well as openwork belts, are often used to decorate wide tunics or dresses. For these products you can safely use absolutely any yarn. The main thing is that it matches the rest of your wardrobe in color and texture.
Various types of cotton, linen, viscose, wool, microfiber, polyamide and even acrylic would be appropriate here. True, you should be careful with acrylic, since many products knitted from this material look downright cheap. To make a wide and dense crochet belt, the diagram and description of which includes some kind of continuous pattern, you will need a stiff cotton or linen thread. Sometimes a decent appearance can be achieved by using polyamide or microfiber, but in this case the knitting must be very tight.
Narrow crochet belt: diagram and description
The photograph below shows the sequence of making the simplest belt. You will need little material, about 10 grams. The thread should be quite thick, at least 200 m/100 grams.
Even with minimal knitting skills, you can make such a belt with crochet. The diagram and description of the product are extremely simple: Knit a chain of four air loops (VP). In the second loop, knit 5 single crochets (dc). Work 1 sc in the last stitch. Turn the fabric and knit one lifting loop. In the second sc, work 5 sc, then in the 3rd sc, work another sc. Turn the work and repeat the sequence described in the 4th and 5th points. The cord of the required length is supplied with ties - and that’s it, the product is ready! In fact, this is the most primitive and elementary ribbon lace. All other patterns are designed according to the same principle, but contain a much larger number of rows. The ties can be simple threads, chains of air loops or even decorative ribbons. To make them heavier, it is recommended to sew beads on the ends.
Openwork belt from crochet motifs: diagrams and description
This model has been consistently popular for a very long time. To make it, several identical or different fragments are knitted, which are then connected into a ribbon. Surely every knitter has a favorite round or square piece that she can literally make with her eyes closed; it is quite suitable for such a product as a crocheted belt. The diagram and description of one of the motives is outlined below.
First you need to knit a chain of 6 VPs and close it in a ring, then perform the following steps: 4 VPs, a fluffy double crochet of 3 double crochets (dc), 5 VP, *a lush double crochet of 4 double crochets, 5 VP*. Repeat from * to * until the end of the row. * 5 VP, 3 VP with a common top, pico from 3 VP, 3 VP with a common vertex, 5 VP, SC*. Repeat from * to * until the end of the row. The resulting flower has six vertices, this is very convenient for making an even belt (two vertices on each side are connected to the second flower, two remain at the top and bottom). Such belts are needed to emphasize the waist.
A good example of a simple flower. Knitted from very thick yarn, it will be an excellent decoration for many dresses. If the product is planned to be worn on the hips, then it is advisable to choose pentagonal motifs.
They need to be connected so that the belt has a semicircular shape.
Tight belt for jeans
The next type of knitted belts is designed to perform a practical function: they are tucked into the loops of trousers and skirts.
Of course, the fabric of such products must be very rigid, otherwise it will stretch and there will be no point in it. As mentioned above, cotton, linen, polyamide and wool can be considered optimal. The thickness of the thread is at least 180-200 m/100 grams, the knitting is very tight. To achieve sufficient density, you can use a smaller hook than the one recommended for the selected yarn (for example, not No. 4.5, but No. 3).
Secrets of tight knitting
The pattern can be simple single crochets or the most basic ornaments. If the selected thread is not stiff enough, you can use the following technique:
- Knit a row of stbn.
- Turn the fabric and perform another row, tying the newly formed stbn. That is, each of them will be double.
- Repeat the algorithm outlined in points 1 and 2. This method is also good for making cap visors, hat brims and stand-up collars.
Belt of flowers
A belt made of flowers will become a real decoration of your dress. 
Knitting materials:“Baby cotton” yarn (100% cotton, 330 m/100 g) - 30 g blue, hook No. 2, beads for finishing, 1.5 m wide satin ribbon.
Description of crochet belt:
Tie 2 flowers according to pattern 1, 1 flower according to pattern 2. Connect the flowers in the places indicated in the diagrams. Tie composition 1 next to each other according to pattern 3, 1 next to st. 6/n, 1 next to st. b/n with “pico” (3 tbsp. b/n, “pico”).
Sew large beads into the center of the flowers, and small ones into each picot. Sew the composition to the ribbon. 
Knitted belt and cosmetic bag 
A gorgeous crochet belt and cosmetic bag are women's accessories for every day. Schemes with a description of knitting a belt and crochet cosmetic bags.
Knitting materials: yarn “Natural cotton” (100% cotton, 425 m/100 g) - 70 g dark blue, leftover white, hook No. 1.7, zipper dark blue or black, 20 cm long.
Belt
Dial a chain of 216 air. p. Knit rows 1-3 of 14 sts. s/n, replacing the 1st art. 3 p. rise, * 8 air. p., 10 tbsp. s/n (attach 1st stitch after 8 sts)* Repeat *-* until the end of the row. Finish row 8 air. n., 14 st. s/n. Along the short edges, tie 6 cords of air. p.. 3 cords of 100 air. n. 3 cords of 110 air. n. Alternate a shorter and a longer cord. Braid the cords to a length of 6-7 cm.
Cosmetic bag
Dial a chain of 59 voed. p. and knit 4 rows of st. s/n. Next, knit 10 repeats according to pattern 1 up, starting with 3 sts. s/n and ending with 3 tbsp. s/n. Knit 2 more rows of st s/n. Knit the second side of the cosmetic bag in the same way, attaching the thread to the chain of the initial row.
Assembly: sew side seams. Tie the top cut with 1 row of crawfish walking. Sew a zipper on top. For a flower with dark blue yarn, cast on 4 air. p. and close it in a ring. Knit into the ring b st 5/n.
Next, knit with white yarn according to pattern 2. To the middle of the finished flower, from the wrong side, attach a white thread and tie 3 chains of air. items of different lengths. Bend the chains in half and attach to the middle. Sew a flower onto a cosmetic bag. 
Crochet belt with flower 
A fantasy flower with original crocheted circles in the form of ties bloomed on the belt. The three flowers are crocheted separately and then sewn on top of each other and therefore look especially expressive. We present to you a crocheted belt pattern and master class.
Dimensions: 34/36 (38/40) 42/44
You will need: 100 (100) 150 g white Organico yarn (100% cotton, 90 m/50 g); hook No. 5: 2 large and 18 small rings for tying (diameter 4 and 3 cm)
Main pattern: the number of loops is a multiple of 2. Knit in circular rows according to pattern 1. Start with loops before repeat A, repeat loops of repeat A, perform loops between repeats A and B once, repeat loops of repeat B, end with loops after repeat.
Knit 1 time from the 1st to the 5th circular row. In the 1st round p, tie the initial chain of loops on both sides.
Flower 1: tie a chain of 6 air. p. and close 1 connection into a ring. Art. Knit according to the pattern in 2 circular rows. Start each circular row, as indicated, with the initial air. p. and finish 1 connection. Art. Knit the 1st and 2nd circular r. 1 time.
Flower 2: knit like flower 1. but according to pattern 3. Knit 1 time from the 1st to the 3rd circular r.
Flower 3: knit like flower 1. but according to pattern 4. Knit 1 time from the 1st to the 4th circular r.
Knitting density: 13 cast-on stitches = 10 cm; 5 circular r. = 9 cm.
Getting the job done: knit a chain of 70 (80) 90 air. p. + 1 air. p. rise and knit with the main pattern. After 5 circular r. from the typesetting edge finish the work. Attach a thread to the end of the belt, crochet a large ring until half of the 14th century. 6/n and then tie another 10 small rings 9 tbsp one after another until halfway. b/n each.
Tie the last ring until the end of another 10 tbsp. b/n, then tie the second halves of all other rings 9 and 14 tbsp. 6/n respectively and finish the work by making 1 connection. Art. at the end of the belt. To the other end attach the 2nd large ring in the same way, tying it halfway, but attach only 8 small rings to it.
Place the flowers on top of each other according to size and sew them together to the belt (the distance from the center of the flowers to the end of the belt is 14 cm). 
knitting pattern is provided below. 
You will need: Yarn "Hostess Lux" (100% polyamide) - 40 g gray, hook No. 3, belt buckle.
Dial a chain of 11 air. p., knit in a pattern according to the pattern. At a height of 100 cm, knit 3 rows with s/n stitches, decreasing 1 tbsp in each row on both sides. Finish the work, cut the thread and fasten. Sew on the buckle.
Crochet belt made of rings with a flower
This crocheted belt will be the perfect addition to your summer outfit.
You will need: Orion yarn (77% mercerized cotton, 23% viscose, 170 m/50 g) - 50 g turquoise and coral remains, hook No. 3, 14 rings for tying with a diameter of 3 cm, 12 large beads, a needle with a large eye, a pin.
Belt: Knit with turquoise thread. Place beads on a thread and tie half a ring (about 20 tbsp). Close the loop by enlarging it with your fingers and threading the ball and beads through it. Press the bead tightly onto the ring and begin tying the next ring in the same way. Tie 13 rings in this way. Next, to tie, make a chain of 51 chains. p.
Turn the work and knit st. Then measure the required amount of thread and cut it from the ball, insert the thread into the needle (for convenience) and tie the other half of the rings in the opposite direction, closing the loop before pulling the thread through the bead. Make the second tie on the other side in the same way as the first.
Flower: tie one ring with 40 b/n stitches of turquoise thread. Next, knit according to the pattern (it is shown how 1 petal is knitted). Alternate colors every 2 rows.
Assembly: Sew the flower to one of the belt rings as shown in the photo. 
A belt is not only a comfortable and necessary thing, but also a stylish accessory. A crocheted belt goes well with jeans, summer dresses, and simple skirts. In addition, this is a unique, original and inimitable product. Even if you knit two belts with the same threads, with the same pattern, they will be different. Especially if different people knitted.
To tie a belt, you need:- wish;
- fantasy;
- free time;
- threads;
- hook;
- diagram or instructions.
The choice of pattern, color, threads - all this is limited only by the author’s imagination. Don't be afraid to experiment and try. Crocheted belts will last a long time and delight the owner with their beauty and uniqueness for many years.
