You will need
Yarn (100% sheep wool; 50 m/50 g) - 100 g light red, 50 g each dark red, orange and white for slippers A; 100 g bright blue, 50 g each light blue, blue and mint for slippers B; knitting needles No. 8; set of double needles No. 8.Patterns and schemes
Facial surface
Front rows - front loops, purl rows - purl loops. In circular rows, knit all stitches.Jacquard pattern A
Knit according to pattern A. In width, start with a loop in front of the right arrow, repeat repeat of 4 sts, end 2 sts after the left arrow. Perform in height 1 time from the 1st to 6th rows of the pattern.
Jacquard pattern B
Knit according to pattern B for 23 sts. Knit on the loops on both sides with a light red thread. Distribute the pattern from the middle = double arrow in the diagram. Perform in height 1 time from the 1st to the 15th rows of the pattern.
Jacquard pattern C
Knit according to pattern C. Repeat the repeat of 8 stitches across the width. Pull the finishing thread along the wrong side, periodically crossing it with the background thread to avoid sagging long broaches.
Perform in height 1 time from the 1st to 7th rows of the pattern.
Jacquard pattern D
Knit according to pattern D. When knitting in rows in forward and reverse directions: in width, start with a loop in front of the right arrow, repeat repeat of 14 sts, end 2 sts after the left arrow. When knitting in a circle: repeat the repeat of 14 stitches in width. Work in height 1 time from the 1st to the 30th rows of the pattern.
Sequence of patterns and stripes A
31 rub. persons iron with light red thread,6 rub. jacquard pattern A,
55 rub. jacquard pattern B, while making a rhombus on 23 middle instep loops,
7 rub. jacquard pattern C, knit the remaining rows. satin stitch with orange thread.
Sequence of patterns and stripes B
31 rub. persons iron with bright blue thread,30 rub. jacquard pattern D, knit the remaining rows. satin stitch with mint-colored thread.
Knitting density
15 p. x 19 r. = 10 x 10 cm, knitted in stockinette stitch using needles No. 8. Sample measured after washing in washing machine.
Getting the job done
Slippers A
Cast on 39 stitches with a light red thread and knit patterns and stripes in rows in forward and reverse directions in sequence A.After 19 cm = 37 r. From the cast-on row, continue working in the circle and after the jacquard pattern B add 1 p. = 40 p.
After the 7th p.m. jacquard pattern C in the next 2nd r. evenly decrease 5 times by 1 st = 35 sts. Repeat these decreases in each row and in the same places 5 more times = 10 sts. Pull the remaining 10 sts with a working thread.
Slippers B
Cast on 42 stitches with bright blue thread and knit patterns and stripes in rows in forward and reverse directions in sequence B.After 18.5 cm = 35 rub. From the cast-on row, continue work in a circle.
After 30 r. jacquard pattern D in the next 2nd row. evenly decrease 6 times by 1 st = 36 sts. Repeat these decreases in each row and in the same places 4 more times = 12 sts. Pull the remaining 12 sts with a working thread.
Assembly
Sew a seam on the heel, folding the product in half along the cast-on row. Wash the slippers in the washing machine, stuff them with newsprint and leave to dry.Photo: magazine"Verena" No. 6/2016
It is best to walk on a cool floor in comfortable and pleasant felted slippers. In addition, they can become an original and practical gift.
Dimensions
You will need
Yarn (100% sheep wool; 50 m/50 g) - 100 g light red, 50 g each dark red, orange and white for slippers A; 100 g bright blue, 50 g each light blue, blue and mint for slippers B; knitting needles No. 8; set of double needles No. 8.
Patterns and schemes
Facial surface
Front rows - front loops, purl rows - purl loops. In circular rows, knit all stitches.
Jacquard pattern A
Knit according to pattern A. In width, start with a loop in front of the right arrow, repeat repeat of 4 sts, end 2 sts after the left arrow. Perform in height 1 time from the 1st to 6th rows of the pattern.
Jacquard pattern B
Knit according to pattern B for 23 sts. Knit on the loops on both sides with a light red thread. Distribute the pattern from the middle = double arrow in the diagram. Perform in height 1 time from the 1st to the 15th rows of the pattern.
Jacquard pattern C
Knit according to pattern C. Repeat the repeat of 8 stitches across the width. Pull the finishing thread along the wrong side, periodically crossing it with the background thread to avoid sagging long broaches.
Perform in height 1 time from the 1st to 7th rows of the pattern.
Jacquard pattern D
Knit according to pattern D. When knitting in rows in forward and reverse directions: in width, start with a loop in front of the right arrow, repeat repeat of 14 sts, end 2 sts after the left arrow. When knitting in a circle: repeat the repeat of 14 stitches in width. Work in height 1 time from the 1st to the 30th rows of the pattern.
Sequence of patterns and stripes A
31 rub. persons iron with light red thread,
6 rub. jacquard pattern A,
55 rub. jacquard pattern B, while making a rhombus on 23 middle instep loops,
7 rub. jacquard pattern C, knit the remaining rows. satin stitch with orange thread.
Sequence of patterns and stripes B
31 rub. persons iron with bright blue thread,
30 rub. jacquard pattern D, knit the remaining rows. satin stitch with mint-colored thread.
Knitting density
15 p. x 19 r. = 10 x 10 cm, knitted in stockinette stitch using needles No. 8. Sample measured after washing in a washing machine.
Getting the job done
Slippers A
Cast on 39 stitches with a light red thread and knit patterns and stripes in rows in forward and reverse directions in sequence A.
After 19 cm = 37 r. From the cast-on row, continue working in the circle and after the jacquard pattern B add 1 p. = 40 p.
After the 7th p.m. jacquard pattern C in the next 2nd r. evenly decrease 5 times by 1 st = 35 sts. Repeat these decreases in each row and in the same places 5 more times = 10 sts. Pull the remaining 10 sts with a working thread.
Slippers B
Cast on 42 stitches with bright blue thread and knit patterns and stripes in rows in forward and reverse directions in sequence B.
After 18.5 cm = 35 rub. From the cast-on row, continue work in a circle.
After 30 r. jacquard pattern D in the next 2nd row. evenly decrease 6 times by 1 st = 36 sts. Repeat these decreases in each row and in the same places 4 more times = 12 sts. Pull the remaining 12 sts with a working thread.
Assembly
Sew a seam on the heel, folding the product in half along the cast-on row. Wash the slippers in the washing machine, stuff them with newsprint and leave to dry.
Product size – 36-39.
You will need: 50 grams of white and the same amount of light gray yarn from Permin Qual Navia Trio, which contains 100% wool; full set regular double needles numbered 3, 5; small hook (No. 3).
Knitting the front stitch: front row - front loops, purl row - purl. In the rows of the circle, knit only face stitches (that is, knit stitches).
Norwegian pattern A (see diagram 1) should be knitted in the face stitch, the loops are knitted clearly according to the pattern. In order to avoid holes along the length of the fabric, the threads must be crossed with reverse side work. We recommend knitting edge loops with both threads. This pattern must also be done for the heel. The pattern is knitted like this: once, starting from the first to the 44th row, and then repeat from the 41st to the 44th row. There is no need to make additions.
Norwegian pattern B (diagram 2) knitted in the same way as pattern A, but clearly according to the pattern. Performed once from the 1st to 33rd row of knitting.
The density of the patterns is 23 p/23 r on a scale of 10×10.
Job Description
To knit the heel, make a set of light gray thread in 31 loops. Knit the purl row with purl loops, the next 44 rows are the Norwegian pattern A. After that, pull a loop through the chain of edge loops. To the remaining 29 stitches for the top of the slippers, cast on another 31 stitches using light gray thread. On the resulting 60 loops, knit in a circle. At the same time, on the 29 loops of the sole of the future slippers, continue to knit pattern A. The upper part of the slippers should be knitted with pattern B. Having started to decrease the loops on the upper part of the product, at the same time decrease the loops of the sole: on 3.4 loops of the sole, draw a loop ( the loop is removed as a front loop and pulled through the previously removed loop); From the end of the 4th and 3rd loops, knit together in a regular knit stitch. From the beginning of work, mark the 33rd row from the top and start knitting two loops at a time. Pull off the remaining loops. When finished, sew side seams on the heel. Tie the edge of the knitted product with a prepared crochet hook (3 times with a regular single crochet) with a thread of any color.
Size: 36-39
You will need: 50 g each of white and light gray yarn Permin Qual Navia Trio (100% wool, 120 m/50 g); set of double needles No. 3.5; hook number 3.
Facial surface: persons r. - persons p., out. r. - purl p.; In circular rows, knit only faces. p.
Norwegian pattern A knit faces in satin stitch according to counting pattern 1, knit stitches in even rows according to the pattern. To prevent holes from forming in the fabric, cross the threads on the wrong side of the work. Knit chrome. always with both threads. For the heel, perform 1 time from the 1st to the 44th row, then repeat from the 41st to the 44th row, but do not perform any additions.
Norwegian pattern B: knit like Norwegian pattern A, but according to counting pattern 2. Work 1 time from 1st to 33rd r.
Knitting density, Norwegian pattern: 23 p. and 23 r. = 10x10 cm.
Job description:
For the heel, cast on 31 sts using a light gray thread on stocking needles and knit 1 purl. r. purl, 44 r. Norwegian pattern A. Then stretch through each edge. loop located next to it, to the remaining 29 sts for the upper part, cast on 31 sts with a light gray thread and knit in circular rows on all 60 sts, while on 29 sts of the sole knit with the Norwegian pattern A, on 31 sts of the upper part - Norwegian pattern V.
Simultaneously with the start of decreases on the upper part, perform the same decreases on the sole, i.e. on the 3rd and 4th stitches of the sole, perform a broach (slip 1 stitch as knit, 1 knit and pull it through the removed loop), knit the 4th and 3rd stitches from the end together. After 33 r. From the beginning of the upper part, knit 2 stitches together, knit the remaining loops with a working thread. Sew the side seams of the heel. Crochet the top edge 3 times. Art. b/n light gray thread.
