Hairpins for school made of foamiran. Hairpin with spring flowers made of foamiran

Handmade products have recently become increasingly popular, penetrating many areas of life. A striking example is decorative jewelry. Fashionistas enjoy using foamiran hairpins - original hair accessories that are famous for their irresistible beauty and uniqueness. A hairpin created by yourself will be of particular value to its owner.

Foamiran (other names: foam, revelur, fom eva) is a foam material for decoration. Produced in sheets, the distinctive characteristic is softness and pliability. Thanks to these properties, the material perfectly “remembers” the required shape and texture, retains bends and veins. Foamiran is easy to cut and wash. It is non-toxic and harmless to humans and the environment.

The term “foamiran” comes from the name of the manufacturer Foamlran. The material was brought to Russia from Iran. Until now, this country is the main supplier of foam to the handicraft market.

The color range of the material is represented by a huge variety of options. If you need to give hairpins with flowers made of foamiran a unique tone or create a smooth transition from one shade to another, you can paint the material yourself. There is foam with prints (flowers, geometric shapes, pictures).

Another advantage is the variety of compositions that can be created from this plastic material. Hairpins, headbands, bows, garlands, flowers, unique decorative elements. It is recommended that you first watch several master classes on making foamiran hairpins. They will allow you to clearly understand the intricacies of the process. Foamiran

What you need for work

Foamiran hair clips, like any handmade product, are created according to a certain technology. First you need to select a model. A huge number of examples for every taste have been published on thematic portals. You can draw your own sketch. Then you will get a one-of-a-kind product. After this, you should stock up on additional materials, tools, and decor. To work you will need:

• stationery knife or scissors;
• a simple pencil with which the outlines will be drawn;
• toothpicks for tracing contours, creating veins and small holes;
• wire for frame;
• stamens for flowers;
• tape to wrap the base;
• iron or lighter for heating.

Having all the items from the above list at hand, you can safely begin making a composition that will remain attached to the base. The following types of hairpins are suitable for this: comb, clip, banana, click-clack. Elastic bands, hairpins, and hoops are also used.

Basic techniques for creating flowers and leaves

A distinctive feature of foam is its ability to stretch slightly. This is quite enough to give the material the required shape. The main thing in this matter is not to overdo it, otherwise it will tear.

Foamiran becomes pliable under the influence of heat. You can use a lighter, iron, candles. However, the temperature of human hands is quite enough to form the desired detail of the future composition.

The most common foamiran product is flowers. Initially, a stencil is prepared taking into account all sizes. The larger the flower you plan to make, the larger each individual petal should be. After this, a sheet of foam 1-1.5 mm thick is taken. Using a toothpick, transfer the shape according to the pattern onto it. Then the required number of elements is cut out. The product is formed according to the principle: cut - heat - shape - glue.

Rose

The rose is considered the easiest flower to make from foamiran. To do it, you just need to repeat the step-by-step algorithm:

1. Prepare the stencil.
2. Using the template, cut out the green sepals and leaves, petals from a material of a suitable color. The volume of the finished product depends on the number of petals.
3. Heat the leaves with an iron or lighter, shape them like an accordion, and twist them. Pull out the middle to create volume.
4. Use foil to make a drop of the size required for the bud.
5. Attach the bead to a 15 cm long wire.
6. Insert a glue-coated wire with a bead into the center of the foil drop.
7. Glue 3 petals onto the drop so as to disguise the foil element.
8. One by one, attach all the petals to the finished bud.
9. Cut the sepals around the perimeter.
10. Treat the sepals and leaves with a heating device in the same way as the petals, and connect them to the flower using glue.

It is recommended to heat foamiran petals with an iron. To form a wavy edge you need to use a lighter. The material is highly flammable, so contact with fire should be no more than a second. If a part catches fire, do not extinguish it with your fingers. In this case, it is better to always keep a container of water nearby.

Chamomile

Despite their simple appearance, many girls love daisies. To make this flower from foamiran, you must follow the instructions:

1. Four circles are cut out of white foam with a difference in diameter of 1 cm.
2. The shape of the petals is cut along the entire perimeter, after which they are cut to a distance of 3 mm from the center.
3. The edges of the petals are heated and given a characteristic shape.
4. A center blank is cut out of yellow foam - a strip of 27 x 2 cm.
5. Cuts are made along the entire length to create a fringe effect.
6. The whole part is smeared with glue using the drip method and twisted.
7. The finished center is attached to a wire.
8. Prepared petals are strung from the bottom to the stem from smallest to largest.
9. Each layer is fixed with glue.
10. The final element is a green backing in the form of a circle with cuts.

Lily

Creating a lily from foamiran will not be difficult even for novice craftswomen. Manufacturing algorithm:

1. A stencil is created in the form of a lily petal 6 cm long.
2. 6 petals are cut out from a white material using a stencil.
3. On both sides, the blanks are tinted pale pink or pale lilac.
4. The petals are heating up.
5. Using a toothpick, press out the veins.
6. Beautiful wavy curves are formed along the edges.
7. Dots are applied to each blank, the bottom of the petals is darkened with a brown felt-tip pen.
8. The stamens are connected to the wire using glue.
9. 3 green oblong leaves are cut out of foam.
10. After heating, a texture is created.
11. Petals are attached to the stamens with glue in several rows, three elements in each.
12. Leaves are glued to the flower.

Ranunculus

Ranunculus is a fairly common flower throughout Russia. Only few people know it by this name; most people know it as buttercup. Making it yourself is not difficult, for this:

1. The stencil is being prepared.
2. Petals of different sizes are cut out of red material. The greater their number, the more magnificent the flower will be.
3. A small ball is rolled out of foil.
4. The foil core is attached to the wire.
5. The petals heat up and form in the form of waves.
6. Overlapping petals are glued to the foil ball, starting with the smallest ones.

Dandelion

Dandelion is one of the most common flowers on the planet. You can make it from foamiran by following the recommendations:

1. A strip of 2 x 60 cm is cut out of yellow foam. If smaller sheets are available, then you need to prepare several strips, giving a total of 60 cm.
2. Incisions are made along the entire length, not reaching the edge 5 mm. It turns out fringe.
3. A wire 10 cm long is wrapped in a strip of green foam 5 mm wide. Glue is used as fastening.
4. After the stem is ready, fringe is wound on it, each layer is fixed with glue.
5. The finished flower is heated and the petals are given the desired shape.
6. Leaves are cut out of green foamiran, and after heating the veins are pressed into them.
7. Using glue, the leaves are attached to the stem under the flower.

Perhaps everyone in childhood wove a wreath from dandelions. You can feel like a child again by making it from foamiran. The product will give the same joy, but will not wither. You can wear such a wreath to folk festivals or a theme party.

Orchid

Since ancient times, the orchid has been considered a symbol of wealth, love and beauty. Even a novice needlewoman can make this beautiful flower; just use the master class:

1. First, a template is prepared.
2. White three-petal and two-petal blanks and a tongue are cut out.
3. The petals are heated and pressed on a special mold, taking the required shape and texture.
4. The tongue is tinted in three colors. The tail and wings are lilac, the head is yellow, the middle is a red dot.
5. Each side is treated with a heating device and twisted towards the central part.
6. A two-petal blank is glued to the center of the tongue from below, then a three-petal one.

Jasmine

Jasmine attracts not only its beauty, but also its wonderful aroma. You can create a flower by following the step-by-step guide:

1. The stencil is being prepared.
2. The prepared form is transferred to the material and cut out. For one flower you will need 2 four-petal blanks, 1 sepal, stamens in the form of a white rectangle, 3 leaves.
3. The petals are heated, a depression is formed, and the appearance of a cup is given.
4. The leaves are heated, veins are drawn, and a boat shape is created.
5. The white foamiran rectangle is cut, not reaching the edge 5 mm. The result is a thin fringe.
6. The free edges of the stamens are painted yellow.
7. The stem is formed from wire 7 cm long.
8. A fringe of stamens is wound around the stem, everything is fixed with glue.
9. From the bottom of the stamens, 2 rows of petals are strung alternately on a wire in a checkerboard pattern and secured with glue.
10. The last layer is glued sepals.
11. The leaves are attached to a separate wire.
12. The composition is assembled by twisting the wires of the flower and leaves. The bare area is decorated with a satin ribbon.

A hairpin with jasmine made of foamiran, decorated with beads and rhinestones, will be an excellent gift.

Leaves

Making almost any plant composition is not complete without leaves. It is very easy to create this element from foamiran, especially if you have a special mold. The finished form saves a lot of time, you don’t have to make the veins by hand, and the appearance is quite realistic.

The creation of leaves begins with the preparation of a paper stencil, which is applied to the foamiran sheet. Next, the elements of the required size and color are cut out. The finished products are warmed up. Using a toothpick or mold, the veins are drawn, the desired shape and bend are given. If necessary, the leaves are additionally tinted.

Accessory assembly

After the flowers are ready, they should be collected into a composition that will make foamiran hairpins more colorful. There are two simple options that are usually demonstrated in master classes. Everyone can choose the most suitable one:

1. The main material for assembling the composition is glue. Each individual element is trimmed so that the base is even, without additional material residues. After this, all items are placed into the composition. During the process, it is recommended to swap individual elements to create the optimal option. Flowers made of foamiran, petals and additional decor are connected to each other with glue in the places of greatest contact.
2. The main material is wire. One end of it is smeared with glue and stuck into the center of the flower. If you cannot pierce the foamiran, you can first prepare the hole with an awl. The wire is fixed to the leaf from below. After all the elements of the composition have acquired additional legs, the finished product is assembled by twisting the wire together. In the case when the fastening material stands out from the overall picture, it can be wrapped with a satin ribbon to match the petals or leaves.

After creating the composition, it must be attached to the base hairpin. First you need to determine the exact location. It is advisable to first try on the unfixed version in front of a mirror. Then, using glue or wire, the flower arrangement and the hairpin are connected.

When using glue to attach a large bouquet, you can be on the safe side by using adhesive made of dense material, which is installed from the bottom of the hairpin and elastic band, capturing the edges of the composition. If wire is used, it is recommended to decorate its open areas with satin ribbon, and carefully trim off the excess pieces. For comfortable contact with the head, especially when creating children's hairpins from foamiran, it is also recommended to use adhesive.

If you decide to make foamiran hairpins with your own hands, you should start with the simplest options. These include dandelion, chamomile, jasmine. It is recommended to watch at least one master class in advance. Only after the first copies are ready can you begin to create more complex compositions.

In order to correctly determine the size of the flower, you need to choose in advance the hairpin that will be attached to it. The larger the surface of contact between the base and the flower, the larger the composition can be. If you attach large flowers to small hairpins, they will come off over time.

Beginners should not purchase a large assortment of material in advance. It’s better to start with 2-3 sheets of the required shades to create a specific flower. Only after successful completion of the process of making hair accessories from foamiran can you safely go to the store to purchase additional material. For convenient work, it is enough to have the basic colors on hand: white, yellow, green, red, pink, lilac. At any time they can be given the desired shade using paints.

Video

Anyone who has never heard of foamiran, much less worked with it, has no idea how many things can be made from these colored leaves. Children's elastic bands are often decorated with delicate roses made of foamiran, and beautiful hairpins with products made of foam will decorate the collection of hair accessories not only for girls, but also for adult ladies.

Hairpins can be small, or they can be quite bulky and accentuated. Such hairpins are the essence of a hairstyle, and they are often made specifically for some kind of celebration. These can be crab hairpins or clothespin hairpins. Most often, a flower is chosen as the main object.

Rose is the most popular option. It's not very difficult to do, but sometimes it's not an option for beginners. Still, there are easier schemes, using examples of which you can practice working with foam.

Wedding hairpins with foamiran flowers are very popular. Such handmade jewelry is the best compliment to the bride. Especially if they are in tune with the circumstances of the celebration. For example, a wedding in May - and the bride has a hairpin with a sprig of lilac in her hair. Or during the season of peonies, the bride flaunts a hairpin with a foam peony.

Features of working with the material: DIY foamiran hairpins

Before attaching a beautiful flower or berry to a hairpin, you need to make this very flower or berry. And without knowledge about the material itself, it will be difficult to make a product of high quality. Therefore, the following information will not be superfluous.

What you need to know about foamiran:

• The main property of foam is to remember the shape that you gave it, but remember that you cannot stretch the material too much (it will tear);
• The material does not absorb water, so a product made from it can be washed, and if you are caught in the rain with such a hairpin, it will not be deformed;
• Sheets can be cut perfectly with ordinary scissors, but modern hole punches are often used;
• The color range is wide, but light foamiran is traditionally more popular, since it can always be tinted if necessary.

PVA glue is not suitable, ideally you need hot second glue. Therefore, all lovers of foamiran will have to stock up on a glue gun. The downside is that the material is porous and soft, so indentations from nails and sharp objects may remain on it, so be careful.

DIY hair clips from foamiran: list of essentials

So, you want to make a wonderful hair clip for girls. However, such a hairpin is also suitable for young girls. First, see if you have everything you need.

To work you need:

• White and green sheets of foamiran;
• Green corrugated paper;
• Regular scissors;
• Hot glue;
• Ready stamens;
• Cardboard;
• The hair clip itself;
• Lighter;
• Thin wire;
• Pencil.

And, as always, the work begins with preparing the place where you will work. Don't forget about good lighting (ideally daylight), and a clean place where nothing will distract you from your work. Well, be patient, the process is not the fastest and requires attention and caution.

Beauty from foamiran: MK hairpins

So, first you need to make a template in order to draw and cut out the petals. Make a blank for the petal from cardboard. The diameter is usually within 4-5 cm, the entire workpiece will consist of 4 petals.

The template is cut out of cardboard and applied to the foam so that there are minimal scraps left. It is not recommended to do this with a pencil or pen; make the contours for cutting with a toothpick or the back of a brush. Moreover, it has a pointed tip.

Eight four-petal blanks need to be cut out of the foam. And then use nail scissors to make a wave along the upper edge of each piece so that future petals look natural. Then take 4 blanks and stack each one on top of each other. And then twist them together like you twist laundry when washing. But not very much.

• Warm up the middle of each workpiece - use a stick to make a depression in the middle, from the inside;
• At a distance from the outside, direct the flame of the lighter to warm up the material - let it take the shape you want;
• Do this with each workpiece;
• Then the flower can be assembled - fold the stamens in half, glue them to the center of each flower with a glue gun;
• Then you need to make the sepals - cut the foam into 8 squares 2 by 2 cm;
• Cut out the sepals, and twist each edge of the workpiece with your fingertips, and then glue it to the base of the flower;
• Make twigs from wire, wrapping each stick in corrugated paper (optionally, tape);
• The length of the branch will be 8 cm, and for the buds you need 5 sticks of 5 cm;
• Leaves and sepals are formed from the green foam.

The final part: automatic hairpin made of foamiran

A wire is screwed to the inside of each leaf; set them aside for now. Make buds, cut out petals from white foam, about 5 for each bud. Collect a bud on a short stick and secure each petal with hot glue. The sepal is the last to be fixed.

You need to collect the twig from the top edge, securing three buds and one leaf on the twig. Screw the wire onto the twig, cover the places with green corrugated paper, attach one leaf lower down on each side of the twig. Then go lower so that you can wrap 2 branches with buds and 2 leaves on each side. Secure the flowers to a branch; free space is needed for each flower.

You will get a beautiful twig, which all that remains is to glue it to the clip with hot glue. Press the workpiece onto the glue and hold for a few seconds. The glue should set. If you want more shine, you can arrange additional decoration for the hairpin - beads, glass beads, seed beads, etc.

Is a rose hair clip made of foamiran in fashion?

Of course, the rose was and is considered a classic option, although a little boring. Therefore, even for a wedding, brides prefer to do something more original - sometimes the hairpin can be in the form of strawberries or candy. But this, of course, is for bolder brides.

If you still like the pink option, think about a hairpin made from a small bouquet of small bush roses. It will look more elegant and original than a once-blooming bud. And at the same time it will emphasize the freshness and youth of the bride.

Ideas: headbands and hairpins made of foamiran

The craftswomen just don’t come up with any ideas! Nowadays, New Year's hairpins are being actively made - such as a fir branch or New Year's balls. You can use shiny foamiran for these purposes.

Also look great:

• Berry headbands and hairpins;
• Hairpins in the form of sweets - candies, marshmallows, cookies and marmalades;
• Hairpins in the form of smiley faces;
• Hairpins in the shape of sea creatures - from shells to skates.

But, of course, no one limits your imagination. You can make entire compositions from foamiran. And sometimes a simple chamomile or cornflower on a hairpin becomes a favorite decoration.

Foamiran hairpins: master class (video)

Be sure to try working with foam - this material is interesting to use, it turns out very natural. And the hairpins are a sight to behold, and you wouldn’t be ashamed to give them as a gift.

In this tutorial on foamiran, I will tell you and show you, using step-by-step photos, how to make several types of small flowers with your own hands from the remains of foamiran and consider several ways to attach flowers to pins.

First, let's decide on the source materials for foamiran studs, which we will need to make flowers. Once again, I cut out all the blanks for the hairpins from the remains of foamiran, of which there is always a lot left over when making large flowers.

Materials for making flowers from foamiran on stiletto heels:

• white foamiran;
• iron;
• white or blue beads;
• boule or auxiliary material and sponge;
• blue oil pastel and wet wipes or sponge;
• second glue and toothpick;
• beads and bead wire;
• 4 studs.

Foamiran flowers on stiletto heels: master class with photos

We begin our work with a pattern. The patterns were developed by foamiran master Elena Semanova.

According to the pattern, we will prepare blanks for the flowers.

Making roses on stiletto heels from foamiran

The first method of attaching flowers from foamiran to a hairpin.

According to template 1, cut out the petal circles and sepals for the rose.

Take a piece of foil 6.5*5.5 cm and fold it into a strip 0.5 cm wide.

Like this one.

We pass the strip between the legs of the hairpin and fold it in half.

Then twist it into a droplet shape.

The sepal can be cut out of blue foamiran or tinted on both sides with blue oil pastel.

On the petal circles we apply a wavy mesh texture with a stick.

The foamiran hairpin has become very popular lately. After all, when making it, the imagination of the needlewoman is unlimited. And you can make an exclusive piece of jewelry that no one else will have.

In addition, it is also a very interesting activity. After all, the manufacturing process is quite simple, and even a novice craftswoman can handle it.

Let's make a foamiran hairpin with our own hands with a description of the work

For future decoration you need to take:

• Hairpin without decoration (curved)
• Foamiran
• Oil pastel pencils
• Scissors
• Ready stamens

Let's take white foamiran and cut it into pieces 2 by 2 centimeters, from which we will cut out parts of the flower, each of which will have eight petals. When the bases of the flower with petals are cut out, paint them over with pastel pencils. It is necessary to paint on both sides. At the same time, we paint each one differently. One has only the middle, the other has the whole thing, and the third has only the ends. For one hairpin you need three of these bases with petals. Therefore, how many hairpins you plan to make, multiply by nine and cut out the same number of bases with petals.

Then you need to iron the petals on low heat so that the tips rise to imitate the shape of the flower.

We make the middle of the flower from the prepared stamens, then pierce the base in the center and thread the wires of the stamens there, drip a little glue and put on the rest of the bases. Add more glue. We move them a little to the side from each other so that they are not one on top of the other. Thus, it is necessary to make all three flowers.

We use a piece of green foamiran to make the background for the hairpin, as well as the petals for the flowers. To do this, cut out a piece in the shape of a hairpin from a piece of green color and glue it on top of it. We additionally paint the petals on top with a green pencil, bend them with an iron and stretch them with our fingers for a leaf effect.

Together with the flowers, we glue the petals onto the hairpin. If you also decorate it with some beads, it will turn out quite elegant.

Universal rose hairpin.

We present a master class on making a universal hairpin. It can be used both as a hair decoration and as an original brooch. To make a wonderful decoration in the form of a rose, you need to prepare three strips of white foamiran. The first is 3 cm wide and 10 cm long, the second is 4 cm wide and 16 cm long, and the third is 5 cm wide and 33 cm long. Cut each strip into pieces. The first into three equal parts, the second into four, and the third into six. This is the basis for our petals.

We cut out the first three in the shape of a drop, four - like hearts, six - in the form of a crown. The bottom of all the petals is painted pale pink. And the top is light purple.

We heat them with an iron so that they change shape, then we collect them with an accordion and knead them. After cooling, straighten it. But that's not all. You need to treat the petals with a spark from a lighter. We heat the largest ones at the top, making two bends, and at the bottom, also two. We heat the protruding part from the inside, making a bulge. And in the middle we warm up the front side and bend it out.

We heat the heart-shaped petals from above and from the sides to create waves. We warm the protrusions in the form of ears and bend them in opposite directions.

We warm the last petals closer to the top and make two bends. Turn the top right side out and the sides to the opposite side.

From ordinary foil we make a base for a rose in the shape of a 1.5x2 cm drop. We glue the small petals first. You need to glue it so as to cover the base. Therefore, glue the middle of the petal overlapping each other. Then a line of larger petals. We glue them barely, around 1.5 cm from the bottom. And we glue the largest petals in two rows. First, three in a regular triangle, so that the curve of the top points inward. Then there are three more between them, with the bend looking outward of the flower. The result is such a wonderful rose that we made with our own hands.

We cut out the leaves from green foamiran, measuring approximately 1.5x7.5cm. We paint them with dark green pastel color. Using the iron, we still bend the edges, making waves.

We glue all our hairpin details to a universal clasp and you can go show off to your friends.

Video on the topic of the article

We bring to your attention a selection of videos that describe in detail the processes of making various jewelry. These master classes will help lovers of original jewelry create unique products from foamiran.

Why is foamiran attractive for needlewomen? Perhaps, its cheapness and availability, durability and, of course, the ability to model wonderful hair products and more. This master class tells you how to make unique roses of different shades with green leaves, arrange them into beautiful bouquets and decorate the clips. The proposed color combination looks interesting and in itself attracts attention. And the roses themselves look tender and tender, like real buds.

You can also apply this method of modeling bouquets to boutonnieres; they will be used during the wedding season. It is enough to make white or pink flowers, even the leaves can also be white, then attach them to pins or leave them on clips as here - they are also convenient to attach to a jacket.

For one hairpin, decorated with a triple bouquet of soft foamiran texture, we will need:

• a template for roses with a diameter of 4 cm or a hole punch of a suitable shape (the latter case is ideal for mass production of jewelry);
• 4 flowers cut from pink foma;
• 4 flowers cut from blue Thomas;
• 4 flowers cut from white Chinese heat-resistant foma;
• 3 double-sided stamens red;
• 3 double-sided blue stamens;
• 3 double-sided white stamens;
• Thin bright green foamiran for leaves;
• Figured mold in the shape of an oblong sheet (approximate dimensions 3*5 cm);
• Scissors;
• Iron;
• Toothpicks or ear sticks;
• Hot melt adhesive;
• Felt base approximately 4 cm;
• Hairpin clip 7.5 cm.

As you can see in the final photo, each foamiran bouquet is composed of three buds of the above shades. The proposed fantasy resembles a combination of the colors of the Russian flag, which is very relevant. The bouquets are also complemented with green leaves and decorated with stamens to match the roses. Using a template and scissors, you need to cut out the parts, use an iron to heat the soft foam material so that it deforms and take a more believable shape, use a mold to squeeze out the veins on the leaves, and use hot glue to attach all the parts together.

How to make a decoration from foamiran:

Make a flower template with six petals, cut out blanks from sheets of each color. Be sure to make cuts between the petals in each soft flower, not reaching 3-4 mm to the center.

To create a wavy effect, use an iron. In this case, the mold was dense and heat-resistant, so there was no need to heat the sole to the maximum; the first position of the regulator was enough. Place each flower on the hot sole for a moment, then remove carefully with tweezers, you will see how the petals curl up.

Also, use a pencil or stick to press each piece onto a soft sponge to give direction to the petals.

Cut half of the ear stick. Pierce the middle with the lower end and pull until it stops. First close three petals through one, then the remaining three. Glue the next layer and also direct the petals inside the bud.

Assemble a rosette from four layers.

The flowers will be miniature and lush.

Make the blue and pink components according to the same scenario, using an iron, a sponge with a pencil and an ear stick.

It is better to make the petals from thin foam; its texture is more pliable for molding. Based on the size of the mold, cut out a green rectangle.

Next, press the green fabric onto the iron. When working with molds, it is recommended to set the iron to maximum. Warm up the material, then apply the mold to it on both sides. Press to obtain the desired print. Wait for the material to cool, then remove the mold.

Make several textured blanks for decoration. If there is no mold, then you can use a toothpick for the veins. Only in this case there is no need to heat the fom. And the resulting leaves will not be so believable.

Cut off the excess and the sheet is ready. Cut out another felt circle.

Glue 6 leaves onto the circle, attach bunches of stamens, collecting multi-colored bouquets.