Interesting and stylish bunnie booties. Master class on knitting: Booties "Bunny" Booties for babies knitted hares

24.01.202227.05.2017

When a baby appears in the house, you really want him to have all the best and most beautiful things. Children's things are very cute and bright. One of these adorable little things is booties, especially knitted ones. Needlewomen not only use interesting and varied patterns to create them, but also give them the shape of some animals or decorate them with flowers and berries. One option is bunny booties, which have funny ears and imitate a bunny's face.

We will look at a master class on knitting them in this article. In addition, knitted “slippers” are very soft. They are easy to put on small feet and do not cause any inconvenience to the baby. Don’t forget to use the provided diagrams and videos to better understand the process.

Photo master class on knitting booties

Required accessories

So, to knit booties in the shape of bunnies for ages from 6 to 12 months, using the master class offered here, you will need:

Children's acrylic yarn in two shades. IN in this case this is white for decoration and pink as the main one. But you can take any others to your liking.
We will knit using number 3 knitting needles on a fishing line.
Knitting markers will also come in handy.
Needle for stitching the finished product.
Diagram, as well as a video to study the process.

Work progress

Let's start a lesson that can also be used for knitting regular booties, if you don't do the part about the ears.

Using pink yarn, cast on 43 stitches with knitting needles.
We remove the first edge and knit all the others with knit stitches, and the last one with purl stitches.
Next we will knit six more rows, adding elements in certain places by knitting a loop from the broach of the previous row.
In the second - increase after the first, after 20 loops, mark 1 element after the increase with a marker, add again, 20 loops, increase and the last loop.
We knit the rows in the knit method, with the exception of the last element, which is always purl.
The third, fifth and seventh are knitted without increases.
In the fourth, we increase the number of loops after the edge loop, after 21, then after 3 and after 21. As a result, 51 loops should be formed.
In the sixth - after the first, after 22, after five, after 22. In this way we tied the foot of the future bootie.
Add a white thread to the work without cutting the main thread. We perform 4 rows of stocking knitting (11 in total), and in the twelfth we alternate 2 together with the yarn over.
The thirteenth and fifteenth are purl, and the fourteenth is knit.
Now we cut the thread and tie it to the main one. Fold everything knitted in white in half. This gives bunny booties a frill with a scalloped edge.
Next in the work is the main color. If you look at the canvas from the inside, you will see a “stitch” of white arcs on the pink color where another thread is attached.
We will knit, grabbing the white loop from the knitting needle and the arc from the “line”. To do this, first move the element from the left knitting needle to the right one, grab the arc and place it on the left one, return the previously removed one there and knit them together in the knitting method. We do this until the end, after which we knit a row of purl loops.
Now you need to complete 8 rows of stocking stitch and divide all the loops into three groups. There should be 11 of them in the center, and 22 on the sides.
The boundaries of the parts are marked with markers. We knit 22 loops, and then 10 from the second group and combine the eleventh with the first of the third group (for the front half).
We turn the knitting over and continue to work only with middle group doing 11th each time along with the first. We do this until there are 13 elements left in the side parts.
Having reduced the number of stitches the last time, we simply knit the rest so that the entire fabric is on one knitting needle and knit the faces. and out. row. The bunny booties have an upper hand.
The master class moves on to the next stage. And now we will perform 7 rows with the “1x1 elastic” pattern.
Having finished, we turn the work over to the inside and work in the stocking method for the same amount of time as there was an elastic band.
Turning the knitting over to the outside, we make a front row. And then from the inside we continue stocking stitch for the same amount.
When finished, turn it over and attach a finishing thread, with which we knit 4 purl rows.
We change to the main color without cutting off the previous one, and perform purl, and then knit. Purl 3 rows again with white and close the knitting by knitting 2 rows together.

Making the bunny booties is almost complete. Cut the thread and tighten it into the last loop. We will leave the tip of the main color longer so that we can use it for stitching.

Bunny ears

Of course, bunny booties should have ears.

Now the master class is nearing its end.

Product assembly

The result of the lesson was wonderful bright bunny booties, which you can make in a different color or decorate at your own discretion.

Video: Long-eared bunny slippers

Gallery of MK for knitting “Bunny” booties and other funny shoes

Every mother tries to dress her child in an original way. To create a bright image for your baby, you don’t need to buy expensive clothes. Unusual bunnies will help with this. These baby's first shoes can be not only comfortable, but also beautiful. To do this, you don’t have to know how to knit professionally or look for a specialist in this type of needlework. Just read how to knit bunny booties. The description diagrams shown in this article will help anyone cope with this task.

These bunny booties will look great on little feet. If you choose the right yarn color, both boys and girls can wear them. For a charming baby, you can knit bunny booties using pink or white yarn, but for your son, more dark colors- blue, blue.

All that remains is to consider how to knit bunny booties with knitting needles.
The bunny booties discussed in this description are knitted from “Semyonovskaya yarn”; you can also take “Pekhorka”, in which there is 50/50 wool and acrylic. You will need 5 knitting needles 2.5 mm.
The sole is knitted with knit stitches.
Cast on 7 loops (the first and last are edge loops). Let's knit one row.
2nd, 4th, 6th rows - make yarn overs near the edge loops, in odd rows knit yarn overs as knit crossed loops.
You will get 13 loops.
We knit 26 rows without increases.
Yarn over on each side and knit 15 stitches without increasing. You should get 23 stripes out of 46 rows.
At the beginning and end of odd rows, knit 2 stitches together until 7 stitches remain. Cast them off.
We cast on loops on 4 knitting needles with white thread. There should be 12 loops on the toe, and an even number on the rest.

We form teeth.
We knit a row of knit stitches in the round
2p.: 2 knit stitches together, yo. Repeat until the end.
3-4 rows: fasten the knit loops and cut the white thread.
To form the cloves, we knit with red thread, connecting the loops of the next row with the red loops of the row that was before the white one.

Or knit in a circle with red thread and sew up the loops

9 rows are knitted with knit stitches.

We knit a toe on 12 loops located in the front.
Transfer the 12th loop to another knitting needle and knit 2 loops together.
Rotate the product. Remove the 1st loop, with the thread at the front.
The remaining loops are purl, except for the last one, which is not knitted. The last loop is transferred to another knitting needle and knitted together with the next purl.
Rotate the product.
The first loop is removed, the remaining ones are knitted.
Continue knitting in this way until you have 30 loops and 12 toe loops on the knitting needles.
We finish knitting on the purl row.

We continue to knit from the inside in circular knitting.
2 rows purl, 7 rows – rib 1*1, 7 rows – knit, 1 row – purl, 7 rows – knit. We tie a white thread.
1r. – persons, 1 rub. - purl, 1p. persons., 1 rub. - purl
We take the red thread and continue two rows of knit loops.
We close all the loops.

All that's left is to tie our bunnies' ears.
We cast on the knitting needles 22 loops.
1r. - purl
We knit 6 rows with red thread - 1 row - purl, 1 row - knit, 1 row - purl. etc.
Leave a little red thread to sew on the eyelet.
Knit two rows with white thread and bind off the loops. Use a hook to connect the two edges.

You can also check out another model

For booties you will need:

Yarn “Semenovskaya” or “Pekhorka” (50% wool, 50% acrylic, 5 knitting needles 2.5 mm.)

Spokes

Description of knitting booties

Sole. All rows are knit stitches.

Cast on 7 loops on the knitting needles (of which 1 and 7 are edge loops). Knit 1 row.

2, 4, 6 rows - make yarn overs near the edges, knit them in the odd rows. crossed.

There will be 13 stitches on the needles. Knit 13 purl stripes (26 rows) without increases. Then make 1 yarn over on each side and knit 15 loops without increasing to make 23 stripes (46 rows).

On each side, at the beginning and end of odd rows, knit 2 loops together until 7 loops remain on the knitting needles. Close the loops.

Using white thread, cast on stitches on 4 knitting needles in a circle so that there are 12 loops on the toe, and an even number of loops on the remaining knitting needles.

Knitting “teeth”

Knit 1 row in the round with knit stitches.

Row 2 – knit 2 together, yo – repeat until the end of the row.

Rows 3 and 4 – front rows. Tie and cut the white thread.

We knit in a circle with red thread and form “teeth”. To do this, we connect the loops of the next row with the red loops of the last row, which are in front of the white one.

You can simply knit in the round with red threads and then sew up the loops.

Knit 9 rows in the round.

Knitting a toe on the front 12 loops like the heel of a sock.

Place the 12th stitch on the second needle and knit 2 stitches together.

Turn the work around. Before work, remove the first stitch and purl the rest without knitting the last one. Transfer it to another needle and knit 2 stitches together purlwise. Turn the work around. Slip off the first stitch and knit the rest. Repeat this way until there are 30 stitches + 12 toe stitches left on 3 needles. Stop on the purl row.

Now knit booties from inside in a circle.

Purl 2 rows.

7 rows with 1x1 rib.

Knit 7 rows.

Purl row 1.

Knit 7 rows.

Tie a white thread.

1 row knit, 1 row purl. K1 row, P1 row.

Red thread 2 rows knit

With white thread, knit 1 row, purl 1 row. K1 row, P1 row. Close the loops.

Ears.

Cast on 22 stitches on the knitting needles with white thread and knit 1 purl row.

Red thread 6 rows, alternating front and back rows. Cut the red thread, leaving a long end. Then sew the ears to the base.

White thread 2 rows. Close the loops. Crochet the 2 edges together.

And here’s what the finished bunny booties look like.

Dear aspens, I am very pleased that you liked my booties. I receive emails asking for a description, I have never done MK. This is my first.
I knit on 4 needles, the seam follows only the mark. Cast on 46 stitches on the needles.
to photo hosting →
I have one needle that is thinner, but then the edge doesn’t stretch as much. Next, I distribute the stitches onto 3 knitting needles and knit in the round. 1p - front, 2p - and all even rows - purl. From the 3rd row I make an increase: 1 knit, 1 loop (from the broach of the previous row, then I will mark it as ") 21 knit," ", 2 knit," ", 21 knit," ", 1 knit. Row 5: k2, ", k21,", k4, ", k21,", k2. Row 7: k3, ", k21,", k6, ", k21,", k3. . Row 9: k4, ", k21, ", k8, ", k21, ", k4. (62 loops) it turned out like this:
to photo hosting →
Now we take another thread and knit “teeth” 3 rows - knit, 1 row - yarn over, 2 loops together. And again knit 3 rows. The “white path” is very clearly visible on the reverse side
to photo hosting →
we are recruiting it for an additional knitting needle to photo hosting → and knit the green loop and the loop from the additional needle together. to photo hosting → The “teeth” are ready. Now we knit in a circle, (We have already knitted one row) We knit the next row with purls, then again 1 row with knits, and 1 row with purls. Take another thread and knit 1 row of knits and 1 row of purls.
to photo hosting →
There are 14 rows in total, or 3 tracks of a different color. We knit a “toe” for this on the first knitting needle we have 16 loops, for 2-10, take the main thread and knit 9 knit stitches, 2 together, turn over - knit 9, 2 together. Change color every two rows. We have 16, 10, 16 left (42 loops) we knit with white thread - 1 row of knits, 1 row of purls. Using green thread we knit holes for the lace: 1 row of knit, 1 row: yarn over, 2 loops together, 1 row of purl. Next we knit with an elastic band 1*1, 17 rows
to photo hosting →
Now we will turn the bootie inside out and continue knitting. We knit 1 row of knits, 1 row of purls with green thread. (Pattern - the number of loops is divided by 4, we have 42, in the first row with green thread, I decrease 2 loops, and on 40 loops I knit the pattern) With white thread, 1st row: k1, * remove 1 loop while working, 3 persons*. Row 2: P1, *Slip 1 stitch, thread at work, P3*. Repeat rows 1 and 2 again. Knit 1 row of knits, 1 row of purls with green thread.
to photo hosting →
Then with white thread: knit 3, remove 1 loop, thread at work.
Next row: purl 3, slip 1 stitch, thread at work.
Repeat these two rows again. We knit with green thread: 1 row of knits, 1 row of purls. White thread: k1, slip 1 loop, thread at work. In the next row we knit: purl 1, slip 1 loop, thread at work, purl 3. We repeat these two rows again. And we knit 1 row of knits, 1 row of purls with green thread. Here's what happened:
to photo hosting →
The pattern fits well. The threads are changed on the wrong side, but on the front side it is not visible. We knit 1 row of knits, 1 row of purls with white thread, and close the loops. We sew up the trace. The bootie is ready.

Not all kids love to dress up, but if the clothes resemble a fun toy, the process will become more enjoyable. We offer you a master class that will help you knit bunnies with knitting needles. This shoe option is suitable for newborns.

You will need yarn of two contrasting colors. For girls, pink and white, and for boys, blue and light gray. Choose the composition of the yarn based on the time of year. For summer and spring, cotton, viscose or silk are suitable. For cold weather - wool, acrylic or mohair. In this case, the thread is mixed (50% wool, 50% acrylic). You will need a set of double needles that match the size of the yarn.

Getting started

The length of the foot is 13 cm. Be guided by the length of the child’s leg. Try on the booties while knitting, or work according to exact measurements.

Conventions in the lesson

facial loop - LP;
purl loop - IP.

In the master class follow detailed description. Start working from the sole with yarn of the main color. Cast on five stitches on the knitting needles. In the first row, perform LP, and in the second, make additions. To do this, make two units from the second and fourth loops. Insert the knitting needle behind the front wall, pull out the loop, and again into this loop behind the back wall. Perform the remaining loops as IP.

There are seven loops on the knitting needle. Then knit using the following technique:

In the third row of LP.
Knit the fourth as the second, and you will get 9 loops on your knitting needles.
In the fifth row there is an LP, and the sixth is like the second, and you will get 11 loops on the knitting needles.
From rows 7 to 19, knit in stockinette stitch straight, that is, without any additions.
The 20th row is like the second. Make two increases and you get 13 stitches.
From 21 to 29 rows - stockinette stitch.
30th row - knit the first and second stitches together, then all the loops of the stitch, the penultimate and last loop together.
31st -LP.
32 is like the thirtieth.
Row 33 – LP.

Then in each even row, decrease at the beginning and end of the row, and knit LP in odd rows until 5 stitches remain.

Close the loops, the bunny sole is ready.

Switch to threads of a different shade and tie the cloves. Cast on 16 stitches on the sides of the sole, 6 on the toe, and 8 stitches on the heel:

The first row is all individual entrepreneurs.
2nd row – two stitches together, yarn over, two stitches together again, and so on on each needle. This simple circuit to form cloves.
3rd row and 4th row-IP.

Attach a thread of the main color to the front side of the product and knit 5 rows.

Start shaping the toe part of the bootie. Work on a needle with five stitches. Knit all the loops from the LP needle, transfer the fifth loop to the knitting needle adjacent to the left, and throw the first loop onto the one that was transferred. Return the resulting loop to the knitting needle. Knit the next row IP, and with the last loop do the same as in the previous row. As a result, the loops on the sides are shortened. Continue decreasing until there are 6 and 7 stitches left on the side needles.

Tie two rows of IP. Work according to inside canvases. Then knit 5 rows with a 1x1 elastic band, and 10 rows of LP. Switch to a different color of yarn and knit 4 rows. In the first, perform the LP, in the second the IP, the third LP, and the fourth row of the IP.

Using yarn of the main shade, two rows of LP, then 4 rows with another shade, alternating a row of LP, and a row of PI. Close the loops and make a lapel.