18.11.202027.05.2017

Despite the fact that the 21st century is considered the century of technology, simple needlework remains popular and in demand. In this article we will tell you how to properly knit good, high-quality mittens or mittens using knitting needles. The described methods are suitable for knitting mittens for adults and for children.

First of all, the material!

You should learn with good, expensive threads, and also choose the right tools. The most common options for knitting needles are metal, plastic and wood (usually bamboo), and you should look at them when choosing.

Metal ones do not catch threads when knitting, they glide quickly when creating loops, while wooden ones are light and smooth, but the process is slower with them.

For the first time, you should choose an elastic, stretchy thread that will provide warmth to your palms. For mittens there are various options yarn, it is better for beginners to stick to half-woolen threads - they are quite elastic, do not require a special approach, and as a result they hold their shape perfectly and look beautiful on the hands.

Knitting pattern

Needlewomen have come up with many schemes and patterns for creating mittens with knitting needles, so you don’t need to have a printed manual nearby - all the photos are online. The first thing you should master using patterns is the ability to cast on loops; If you don’t master this basic skill, you won’t get any mittens or any other product.

Usually rows of loops repeat each other if the author’s idea does not include decorations, so it’s easy to learn. The most common casting pattern is circular, so five knitting needles are used simultaneously when knitting mittens.

After that you need to learn how to knit facial loops, because The product is sewn in the front and back layers. They differ in density: the loops on the wrong side are completely intertwined with each other, while the loops on the front side maintain a certain, even row. If the skill of processing both sides is developed, you can begin to draw up a pattern.

Calculation of loops and hand measurements

The measurement stage greatly facilitates future work. For convenience, you need to measure your wrist, fingers and palm. To create your own sample, you should calculate how many loops will fit into 1 cm of each parameter.

The result obtained must be multiplied by the length from the hand to the wrist, then divided by a smaller integer multiple of four. For example, calculations led to 66. The nearest integer divisible by 4 without a remainder is 64, and we take it as a basis.

Are you done? Then we move on to the main thing - knitting mittens.

The process of knitting mittens

You need to start the process with the cuff. The number of loops that will be needed to create a tight, good cuff should also be divided by four; the standard length is 7 cm. At the beginning of work, you need to gradually close the loops into a circle, and then knit tightly with an elastic band to the required length so that the outer part of the mitten can stretch to fit your hand.

You need to knit up to the hole from which the thumb will then be made. Already at this point, it makes sense to move on to the beginning of the pattern, in which one cell will correspond to one loop - it’s easier to calculate and not make a mistake.

Having made it to the base of the thumb, you need to remove several loops with an additional thread - this way the circumference of the finger is adjusted. You need to collect the same amount air loops, then continue knitting up to the little finger. To better see how the mitten will look on your hand, you need to try it on periodically.

The edges of the mittens are made by decreasing two loops, which are tied together. When the number of remaining loops reaches 8, they also need to be tightly pulled together with additional thread and secured, and so that the mittens do not start to diverge, the tip of the thread must be tucked inside.

At this point, the base of the mitten should be ready. We remember about the hole and return to it: perhaps this is the simplest part - traditionally there are no patterns or decorations on the small finger. The mitten can be considered complete, the second one should be knitted in the same way as the first one, but in a mirror image (so that you don’t end up with two left ones).

Patterns and decorations

Without decorations, perfectly knitted mittens will look faded and monochromatic. To fix this, even while creating the mittens, you need to think about what exactly should be on the front or inside.

There are no clear rules, so we use our imagination: often ornaments, images of animals, beads and much more are used as decoration, including embroidery with multi-colored threads.

If to create an ornament it is desirable to knit in different colors, having thought through the picture on the pattern, then everything else is easy to add to the finished result.

A couple more options that should be used during creation are braids on the front side or mittens. The latter, however, are knitted differently; there are separate patterns for mitts.

Photo of the process of knitting mittens with knitting needles

Knitting mittens: knitting based on the master class (photo)

Knitting mittens is a simple and interesting task for needlewomen. You can deal with it if you know what they are various types simple loops.
In this master class we knit mittens using knitting needles. For such a task, needlewomen most often choose circular knitting, known from our grandmothers. This technique involves the use of four working knitting needles and a fifth knitting needle, which is free. Before starting work, each needlewoman chooses patterns that seem easy to implement, thanks to which she will be able to knit beautiful, warm mittens in the shortest possible time.

What are the features of circular knitting?

The very first and most important task is to understand the features of the technique by which knitting mittens will be performed. For this, a video lesson supplemented with detailed description handicraft process.
The basis for successful work is assumed: it is customary to knit a mitten in a circle, trying to avoid the appearance of seams. The buttonholes should be evenly spaced on the four working needles. At the same time, keep the last, fifth, knitting needle free, since at times it will be used to change the rest.
It is assumed that there are no edge loops. In this case, the front loops (LF) should be knitted over the upper parts of the created segments when creating patterns, allowing the thread to work. Row (P) includes only those loops (P) that are knitted using working knitting needles. Wanting to make the task easier, mentally assign a number for each knitting needle.
Video: Circular knitting for beginners

Selecting a model and pattern

Before starting work, decide on the visual design of the accessory and the optimal pattern.

Cuffs are traditionally knitted with an elastic pattern, but this stage promises to be simple even for beginning needlewomen.
What yarn supplies will you need to create beautiful knitted accessories? The exact amount of yarn is determined by the size as well as the pattern chosen. For beginners, it is advisable to use the most simple circuits, because knitting mittens with knitting needles with an unusual pattern is not so easy. In most cases, from forty to one hundred and fifty grams of yarn is required.
Before knitting, the number of loops is calculated. It is recommended to knit the first sample: approximately 14 R in width, and also 10 R in height. Then evaluate the sample, as this will give you an idea of how tight the mitten can be. Wanting to make further work easier, we knit a sample for the elastic band of the accessory being created, since how tightly the mitten will fit on the hand largely depends on the cuff. In addition, it is recommended to knit a sample for the main pattern, because it will allow you to understand how worthy and correctly the handicraft work of a novice craftswoman will be done.
Take measurements of your wrist and palm. All indicators must be recorded, since this approach will allow you to successfully adhere to the creative process scheme. Focusing on the indicators, it is important to cast the optimal number of loops, which will be a multiple of four. Mittens are traditionally knitted from the cuff using a one-on-one or two-on-two pattern.
Video: Simple mittens knitted

Stages of knitting mittens

First stage

items are cast on the first two needles. Subsequently, they will be divided into four parts, which should be identical. When knitting p-ki, it is necessary to create a vicious circle;
how to close the circle? To do this, the ends of the filaments of different glomeruli are connected to each other. According to this scheme, a square is created, which is the basis for the mittens;

items are removed from a free knitting needle;
knitting is carried out without changing direction. The knitting needles should replace each other regularly;
the main goal of the first stage is to create a mitten cuff (about 7 centimeters);
Now you are allowed to do the main part. The instructions will allow you to knit warm mittens with suitable pattern, but for beginners it is advisable to choose a simple option and gradually hone your needlework skills;

the distance that extends between the cuff and thumb, will represent a pattern. Taking into account the difference in knitting techniques, it is possible to understand what possible nuances are best taken into account. If the pattern turns out narrow, add a P on each knitting needle;
After the mitten is knitted along the created line, leave a hole and move on to the second stage of the handicraft process.

Second stage The thumb hole always deserves special attention. The description of the task at hand suggests two options for creating stylish holes. In the first case, the needlewoman’s hole is left open, in the second case, closed:

After this, knit the mitten with the main pattern.
Stage three

The next stage is creating the toe of the mitten. Needlewomen switch to a round or conical shape. To do this, at the end of the handicraft process, reduce the number of P:

rounded shape. Otherwise, the design will be damaged and a beautiful accessory for the winter will remain a dream. To decrease P in a rounded shape, proceed in this way: on each working knitting needle, knit the first two Ps. In this case, focus on the front, main, side and bottom of the segments being created. In each P, the number of P is reduced to the remaining two last P at each P (total number of P - 8).

How can you get a pointed end on a mitten? The first two Ps from each needle need to be knitted together. In this case, the following scheme is performed: on knitting needles 1.3, the loops are supposed to tilt to the left side, on knitting needles 2 and 4 – to the right side.
Fourth stage The description of creating beautiful winter mittens is impossible without knitting your thumb. To do this, use only three knitting needles, dividing the entire number P by only 3. After watching the video tutorial, you can understand that you should not be afraid of the final stage. Everything will be easy:

what to do if the loops were removed with a pin? Now the P should be removed onto the knitting needle. At the same time, for the loops of the upper P you need to cast on new ones. It is recommended to add two side P. You need to act in a circle, reaching the nail. Only after this P is gradually reduced. The remaining 6 P are collected on a thread. Purl fastening is assumed;
the second method involves pulling out a colored thread. We assemble open Ps onto knitting needles. Depending on how wide or narrow the hole for the thumb turns out to be, you can cut off or add a P.

You can knit stylish and warm, comfortable mittens using five knitting needles, because this option is classic and the video will prove the ease of completing the task.

Photo master classes on knitting mittens

Video: Mittens with a beautiful pattern

Comments

Knitting mitts based on the master class (photo and diagram)

With the onset of cold weather, mittens are an indispensable item in everyone's wardrobe. It is very important to protect your hands from the cold, otherwise you can dry out the skin, which will lead to cracks and wounds.

How to knit mittens for beginners step by step

For knitting we will need: wool - 100 g., sp. x 4. We start knitting from the cuff (the initial part of the product). We measure the circumference of the cuff according to the circumference of the hand.

We knit with a 2 x 2 elastic band, so that the number of stitches cast on is a multiple of four. We cast on loops for 2 sp., then distribute in equal quantities to the rest. Knitting occurs in circles. Please note that we make front loops (k.p.) behind the front walls, purl loops (p.) - behind the back ones.

We make a cuff 5 - 6 cm high, then move on to the main pattern. We knit the main pattern, also 5-6 cm high, and create a hole for the thumb.
Let's assume that we have 12 loops on each needle (sp.).

We make a hole for the thumb on the third sp. according to the scheme:
1. Knit the first stitch, remove the next stitches with a pin or marker;
2. To another sp. we throw on as many air loops as we removed on a pin;

We knit further in the circle. We knit the product to the end of the pattern. After we have knitted the main part of the mitten, we begin to knit the thumb.

Drag the pinned loops onto the sp. The number of loops for the thumb should be a multiple of 3. We knit the loops in a circle, starting to decrease the loops from the thumb nail. When we have 6 loops left, we pull the woolen thread through the loops and tighten.

Knitted men's mittens with ornament

In order to knit winter men's mittens with the “Deer” pattern for beginners, we will need: yarn - 150 g, knitting needles.

Basic patterns:

Elastic band 1 x 1 = 1 p.p. x 1 p.p.
- front surface: l.p.

Knitting density: 16 p. x 18 r. = 10 x 10 cm.

Work progress:

Left mitten with an ornament for beginner needlewomen:
We dial 36 p. on sp. and distribute it into 4 sp. We knit a 1 x 1 elastic band about 10 cm in a circle. Change the row between the first and fourth sp. Next we make knits. satin stitch - 2 r.

We knit a pattern with an ornament according to the diagram:

1. on the 1st and 2nd sp. do 2 p. rapport A x 9 r.;

2. on the 3rd and 4th bedrooms. knit 18 stitches of rapport C;

3. We repeat in rapport 1 the first and second rows, in rapports B and C we do from the 1st to the 24th row;

4. Starting from the 2nd row of faces. In satin stitch we make additions for the wedge of the thumb:
A. on the 2nd bedroom we knit the loops according to the picture. When there are 4 stitches left to the end of the row, then add 1 stitch;

b. We knit 2 stitches according to the pattern, then add 1 stitch again and so on according to the pattern. We include all the added loops in our overall drawing;

We do repetitions every 2nd r. x 5 times. After we have completed all the additions, we make 1 row. In the next r. cast on new 2 sts above the loops and continue knitting in the round up to 16 cm.

To form the top, at the beginning of the 1st and 3-1 knitting needles we knit 1 stitch, according to the pattern + 2 stitches. together. At the end of the 2nd and 4th knitting needles we knit 2 knitting stitches. together with a broach (remove 1 stitch like a l.p., then knit 1 l.p. and pull it through the removed one), 1 l.p. We repeat these decreases in each row until we have 9 stitches left.

Take scissors and cut the thread. Pull the thread through the loops and tighten.

When we reach the fingernail, we begin to decrease the loops. To do this, we knit 2 l.p. together until 4 stitches remain. Take scissors and cut the thread. Pull the thread through the loops and tighten.

Right mitten: knitted similarly to the left one, according to symmetry.

How to knit mitts for beginners

Mittens - a fashionable winter accessory for the winter look of a young needlewoman. After reading the article, you will be able to knit mitts for beginners yourself.

To knit mitts we need: thread - 100 g, knitting needles x 5.

In order for the mitts to fit well on the hand, we will slightly reduce the number of loops. So, we knit 44 stitches, then after 5 cm we reduce their number to 40.

We cast on loops and start knitting with an elastic band of 1 x 1, approximately 5 cm (1 stitch x 1 stitch). We evenly distribute the loops into 4 stitches, so 11 stitches on each.

After we have finished knitting the elastic band, we reduce the number of stitches by knitting 2 stitches together and move on to the main pattern.

The first 2 knitting needles are the front part of the mitts, the rest are the lower part. We knit the lower part only in single stitches, and make the front part according to the “double rice” pattern.

We make 1 sp., knit 2 l.p. together for a "wedge". The basic pattern is very similar to the 1 x 1 rib, but with offset rows. We knit 2 p. according to the figure, the next ones change direction - above the l.p. we knit i.p. and vice versa. Thus, we alternate rows, changing direction. After 4 rows we knit a “wedge”, starting from 2 sts of the first sp. We make increases, knit 1 p., yarn over (n.), then 2 p. + n.

We work according to the drawing. In the next r. We knit yarn overs. We reach the base of the thumb. We knit 1 stitch on the first knitting needle, then remove 9 stitches on a pin, and make 4 air loops. Next we knit yarn overs. In the next row we knit these loops 2 together.

Towards the end we again switch to knitting an elastic band, then close off the loops.

Let's move on to knitting the thumb. Add 7 more p. to 9 (= 16 p.). Distribute 4 sts for each sp. and knit l.p. - 6 rubles, then an elastic band.

We knit several rows with an elastic band and close the loops.

The left mitten is ready!

We knit the right mitt symmetrically according to a similar pattern.

How to knit mittens for beginners using 4 knitting needles

Knitting warm mittens - hot topic in the cold season. In order to knit them for beginner needlewomen, we will need: wool - 160 g, 4 knitting needles.

Knitting density: 1.7 p. x 1 cm

Before we start knitting simple mittens, we measure the girth of the hand. We got 20 cm. The mittens are knitted on 4 sp. all around.

We calculate the number of loops: 20 cm x 1.7 = 34 sts. Next, divide them into 4 sp.: 34: 4 = 8.5 Round up to 9 sts, thus cast on 36 sts. For each sp. 9 p.

Work progress:

We knit the first mitten. Mentally divide 4 joints. into 2 parts - lower and upper. Thus the first 2 sp. - the lower part, the rest - the upper.

We begin to knit the cuff with an elastic band of 1 x 1. We alternate the colors of our mittens every 3 rows, so we knit up to 5 - 7 cm.

Next, we make the main part of the mitten in a circle, to the base of the thumb (approximately 5 cm).

We will make a hole for the finger on the 1st sp. for the right mitten, and on the 2nd for the left. We knit 1 st on 1 sp, knit the rest, and return to the 1st sp. This should give us a hole. Next we knit in a circle until the end of the knitting (8 cm).

Let's make a toe. To do this, we decrease p. in the rows. On the 1st and 3rd sp. at the beginning we do 2 l.p. together, and on the 2nd and 4th we knit 2 l.p. at the end. We knit until there are 2 stitches left, close them off.

Let's return to knitting the thumb. We should have 7 loops on one stitch, 6 on the other. Next we work according to the scheme, decreasing the loops at the end. Bind off the remaining 1 stitch.

We make the left mitten symmetrically with the right one.

Warm mittens are ready!

Knitting openwork mittens on two knitting needles

To knit openwork mittens on 2 knitting needles for beginners, we need: wool - 120 gr., sp.

Making the back part:

2. We work with an elastic band 1 x 1 or 3 x 3, as you like. Approximately 8 cm;
3. We knit with the main pattern up to the little finger;
4. Decrease the loops and close the knitting;

Making the front part:

1. We cast on the knitting needles the required number of loops (depending on the size);
2. Knit with an elastic band 1 x 1 or 3 x 3, as you like. Approximately 8 cm. Make a hole for the thumb;
3. Divide all loops into 4 parts. We remove 3 parts with a pin;
4. We recruit the rest to the joint venture. and pick up as many loops as we have on the back. We knit the thumb, close the loops;
5. We work the main part with the main pattern;
6. Decrease the loops and close the knitting;
7. Connect the 2 parts;

Children's mittens knitting patterns and descriptions

After reading the article you will learn how to knit children's mittens for beginners yourself. In order to knit them you will need: threads and sp..

Guided by our description and diagrams, you can easily cope with this task, even if you are a novice needlewoman.

To knit mittens with ornaments we will need: 25 g. thread different colors, knitting needles, large needle.

We cast on 32 sts and sew into a circle. We knit 17 rubles in a circle. elastic band 1 x 1.

After the elastic, add 5 stitches to the row, alternately changing the colors of the yarn. After 14 p.m. From the elastic we make a hole for the finger. On the back side we knit 22 stitches. We knit 7 stitches and throw them back. Next we do the main part to the end. At the end we decrease the loops and close the knitting.

We knit the thumb on the mitten. Take the loops and knit up to 16 sts.

We knit 14 r. in height and decrease p. At the end, close the finger.

We make the second mitten in the same way as described.

Knitted mittens with ornaments for children

In order to knit children's mittens with an ornament we will need: yarn - 200 g, knitting needles x 5.

We cast on the required number of loops, make 5 cm with a 1 x 1 elastic band. We look according to the description of the diagram.

On each sleep 12 p. We make a hole on the 3rd. Knit the first loop, remove the remaining 10 with a pin. Cast on 10 stitches on the right needle and then make the main part as described.

We do the second one symmetrically to the description of our circuit.

For girls, mittens with braids, knitting patterns and descriptions

We cast on 52 stitches and knit 40 rubles in a circle. elastic band 2 x 2. Next, add 2 more stitches and work according to the diagram:

1. The finger will start after 10 p.m. main pattern.

2. On the sides we add sts 3 times, so on the sp. 20 sts are formed.

3. Place the stitch on a pin. We cast on the missing loops and knit according to the pattern.

4. We make the main part according to the diagram. At the end we close the loops.

Children's mittens knitting patterns and descriptions for a 3-year-old boy

In order to knit children's mittens for the 3rd boy we will need: yarn - 200 g, knitting needles x 5.

We cast on the required number of loops, distribute them to each sp.. We make a cuff with an elastic band 1 x 1, approximately 5 cm (the number of loops is briefly 4). First and second sp. - the top part of the product, the rest - the bottom.

We make the main part of the product (5cm), add 2 stitches in a row.

We make a hole for the finger. For the right hand we make a hole on the 3rd knitting needle, for the left hand - on the 4th.

On each sleep 12 p. We make a hole on the 3rd. Knit the first loop, remove the remaining 10 with a pin. Cast on 10 stitches on the right needle and then make the main part according to the diagram.

After finishing the main part, we return to the thumb. We transfer the loops from the pin to the knitting needle, adding loops so that the total number is a multiple of 3.

Distribute the stitches onto 3 knitting needles and knit in the round. At the end of knitting the finger, decrease the loops and close the knitting.

We make the second symmetrically to the description of the first.

We crochet the details of the birds in st. b.n. Sew beads in place of the eyes.

How to knit mittens with knitting needles with a pattern

To knit mittens with a pattern we will need: wool - 120 g, knitting needles.

We work according to the description:

1. Dial to sp. required number of loops (40 stitches);

2. We knit with an elastic band 1 x 1 or 3 x 3, as you like. Approximately 8 cm. Make a hole for the thumb. Remove the loops with a pin;

3. Make the main part the main pattern;

4. Decrease the loops and close the knitting;

5. Return to the thumb and knit according to the pattern;

6. Connect the 2 parts;

Knitted mittens for children video

There are many on the Internet free videos lessons on how to knit baby mittens step by step. For this we will need: thread - 150 g, knitting needles.

Look detailed master cool on the next video

Beautiful patterns for mittens knitting patterns

We present a description of several beautiful patterns for knitting:

1. Openwork braids. The pattern repeat in the diagram is indicated by a red rectangle. The number of rows in the repeat is 10, loops are 18. Empty cells are front ones. In purl r. We make the front loops purl.

2. Openwork leaves. Repeat pattern 16 p. (blue color). In empty cells - l.p.

3. Openwork chessboard. Pattern repeat 13 p. Repeat the pattern in height from 1st to 24th p. We knit yarn overs i.p., purl r. according to the scheme.

Mittens are an indispensable attribute winter clothes. Very fashionable now knitted products self made, so the price for them is not small. Do-it-yourself knitted mittens will not only add something interesting to your evening, but will also help you save an extra penny.

Knitting mittens for beginners, step by step

Let's try to knit mittens on five knitting needles. Four of them will hold the canvas, and the fifth will be working. Before you start knitting, you need to determine your size and how many stitches you will need.

To do this, you will have to make a sample, from which we will calculate the exact number of loops and the length of the mittens. You can't knit by eye. Measure the length of your fingers, wrist and hands. Based on the obtained measurements, bind the sample.

Next you should count how many loops there are per centimeter. We do this using a ruler. We multiply the number of loops obtained by the length of the arm from wrist to hand. As a result, you should have a number that is a multiple of four. If it is different, take the smaller integer that is divisible by 4. For example, it turned out to be 47, it’s not divisible by 4, let’s take 44. All that remains is to build a diagram based on the measurements taken and get to work.

For knitting you will need a set of five knitting needles and yarn. It is better to take wool, it is warm and soft. When purchasing yarn, be sure to pay attention to what needle size is written on it. If you take the wrong knitting needles, the loops will either constantly fly off, or you will find it very difficult to hook them. If you have everything ready, then you can start.

We start knitting with cuffs. Basically, the cuffs are knitted with an elastic band. We alternate 1x1 purl and knit stitches, or 2x2.

We cast on loops, let's say 44 as in our example. To prevent the edge of the cuff from pressing, you need to pick it up as loosely as possible; to do this, you can take a knitting needle one size larger and fold the thread in half. A few examples of how you can cast on stitches on knitting needles:

So, we connect two knitting needles together and cast on loops. Slowly and carefully pull out one knitting needle and knit the first row of elastic as tightly as possible. At the same time, distribute the loops onto four knitting needles. In our case, 11 on each.

After the loops are distributed and the first row is knitted, we close the knitting. Simply join the cast-on and warp threads together. Next we will knit the cuff with an elastic band simply in a circle for a length of approximately 6-8 cm, and to the base of the thumb with regular garter stitch; for beginners this is the easiest option. But if you want, then back side palms can be made into a pattern in the form of a braid.

Let's say you have finished 7 cm of elastic and proceed to the main fabric. Select eight loops in the place where the pattern will be. You can do this using special knitting markers. We will knit these 8 loops as follows: purl 2, knit 6, purl 2. We knit five rows in this way. Next: purl 2, knit 3. remove with a pin (fasten the pin), k3. We remove the loops from the pin onto the left knitting needle and knit three stitches. Next, we knit five rows again according to the previous pattern. On the sixth we use the pin again. And we do this every five rows. You will get a pattern<<коса>>.

Now we knit the finger and finish knitting.

We apply the canvas to the left hand. For the thumb, make four knit stitches on the fourth needle. Remove the loops that go further with a pin, replace them with air ones and continue knitting to the top of the little finger. Then start decreasing evenly on each side, placing the fabric against the pattern to check.

Approaching the top of the middle finger, you need to knit the remaining two loops together and pull the end of the thread to the wrong side. Cut off everything unnecessary.

The thumb remains. Cast on loops around the remaining portion of the fabric. Divide them into four knitting needles and knit to the middle of the nail. There, begin a uniform decrease. When two loops remain, knit them and hide the end of the thread on the wrong side. You can decorate the mittens as desired.

Lessons on knitting mittens, master class

If you succeeded with five knitting needles and you have mastered the basics of knitting mittens, let's knit something more complicated. These are such beautiful mittens made of 100% alpaca wool 167m/50g.

You will need two skeins of yarn. And also stocking needles No. 3 plus another auxiliary needle, and a hook.

We will knit double thread. We distribute 12 loops on the knitting needles. We have 48 of them in total.

Now we will knit the pattern.

Let's return everything back:

We knit with the main thread using face loops:

We continue to knit. This is what three patterns look like:

We continue knitting until the fingers are visible, as in the photo:

Let's start working on the thumb. Remove the conditional thread of a different color and put the loops on the knitting needles, four on each:

The second mitten is knitted similarly.

Sizes for knitting mittens

Measure the circumference of your palm and compare it with the table.

Mittens knitting table

Without exact numbers and calculations you can’t even knit a mitten. Mittens do not require much yarn, no more than one hundred grams for adults and about sixty for children. Yarn consumption increases patterns. If you want to add a braid pattern, for example, then you should buy 25% more yarn.

The first table is for yarn 200m/50g. Knitting needles approximately 2.5.

The second table is for yarn 125m/50g. Knitting needles approximately 3-3.5.

Indian knitting mittens

Indian mitten knitting involves knitting the thumb<<индийским клином>>. These mittens fit very comfortably on the hand, and they are very easy to knit. In this design, they begin to knit the thumb from the elastic band. We’ll look at how to do this below, but here are several options for knitting mittens using an Indian wedge:

Knitting mittens with an Indian wedge

We will knit men's mittens. Yarn Lana gold 800m/100g and angora 500m/100g. In general, they start knitting the wedge immediately after the cuff, but we will first knit several rows and only then start making the wedge.

To create a wedge, you need to add on the left mitten between the fifth and sixth loops, on the right between 18 and 19.

Patterns for knitting mittens, diagrams with descriptions

Knitting pattern for children's mittens

Knitting Thumb Mittens

This method is convenient to use if you knit a pattern on both sides.

To knit the thumb, transfer the loops onto two knitting needles of four. From the opposite edge we pick up eight stitches and also divide them into two knitting needles of four. We continue knitting the finger in a circle. We reach the middle of the nail and begin a uniform decrease. We knit the last loops together and hide the thread.

Another way is to knit the thumb on two needles.

Knitting the thumb of mittens with a wedge

This type of knitting is called both the raglan finger and the anatomical thumb. Tie the elastic band as you need, then proceed as described.

On the third knitting needle we cast on nine chain stitches and knit the remaining ones. Next, follow the pattern and knit the mittens to the top. At the same time, do not forget to decrease two loops on the third knitting needle so that the wedge goes away. To knit a finger, transfer the loops to the knitting needles. We knit an additional nine loops from broaches and spread them over two knitting needles. We knit the finger in a circle.

Knitting mittens with braids

Interesting mittens with convex braids. But before you start doing the work, try knitting the pattern itself separately. This will make it easier for you to understand what knitting density is required for your yarn and how many loops you need.

Cast on 52 stitches on double needles. Distribute them 13 each. The elastic band will be 2 by 2, in forty rows.

Jacquard knitting mittens

You will need approximately 100 grams of yarn. Knitting needle size 2-2.5. As always, start by calculating your knitting density and stitches. Tie the cuff. After this, you can start knitting the pattern. One loop is one cell in the diagram. Work with the pattern carefully, do not tighten the threads too tightly, but also make sure that the thread does not sag from the wrong side.

We knit the mitten with a pattern up to the thumb. Where you remove seven or eight stitches, pick up the same number of stitches and continue the pattern to the top. Finish the top in a way that suits you best.

We also knit the thumb as you feel comfortable.

To knit such mittens you will need twice as much yarn. Work on a double mitten also begins with determining the size and calculation of the loops. When you have everything calculated and ready, you can start knitting.

Let's say we need 48 loops. Divide them into four knitting needles of 12. Knit twenty rows of elastic. We knit the next fifteen lines only for faces. We designate the thumb. To do this, knit four loops on the first knitting needle, and remove the next 8 with a pin. Then we again cast on eight stitches on the first knitting needle and continue knitting the mitten until it is completed. We knit the thumb.

Then we return again to the beginning of the mitten, the first row of elastic. We dial 48 stitches there again and knit 40 rows with an elastic band. Next, we knit the mitten according to the pattern we went through.

Knitting men's mittens

The principle of knitting men's mittens is not very different from knitting classic ones. The only difference is the size. Above we have already provided a table of sizes that you can use as a guide.

Knitting mittens on two knitting needles

You can knit prefabricated mittens on two knitting needles, that is, you will need to sew the parts together, or you can do it without tearing off the threads. Let's try to connect the second option. You will need two knitting needles and optional yarn. The size of the knitting needles should correspond to the thickness of the yarn.

Cast on 24 stitches and knit three to four rows in regular scarf stitch. Next we knit the cuffs with an elastic band 1 by 1. After you knit the cuffs, continue working with knit stitches to the tip of the little finger. Then you need to make an even decrease until you have ten loops left in the middle.

We knit at the height of the thumb, and then we go back in the same way as with the mitten itself. After the finger is ready, we finish the canvas. We tie the face to the elastic band. and knit an elastic band 1 by 1.

The mittens are ready. Don’t forget to try on the product as you work so you don’t have to re-bandage it.

"Large honeycomb" pattern.

We knit the pattern using knitting needles, knit row 1 with knit stitches, and row 2 with purl stitches. 3rd row: 4 knit stitches, 2 loops can be easily removed without knitting, while the thread is at work. Repeat this sequence until the end of the row. Row 4: purl 4 stitches, remove 2 stitches without knitting, with the thread in front of the work. Perform the 5th and 7th rows as the 3rd. And knit the 6th and 8th rows like the 4th. Knit the 9th row with purl stitches, and the 10th row with knit stitches. Row 11: knit 1 stitch, *slip 2 without knitting (the thread is behind the work), knit 4*, repeat * - * until the last loop, knit 1. Row 12: 1 purl stitch, *2 slip from one knitting needle to another (the thread is in front of the work), 4 purl stitches*, repeat from * - * to the last stitch, 1 purl stitch. Perform the 13th and 15th rows as the 11th. And knit the 14th and 16th rows in the same way as the 12th. Next, the “honeycomb” pattern should be knitted with knitting needles, repeating the technology from the 1st row. This drawing can be found in specialized literature and on handicraft sites under the name “waffles.”

Knitting pattern “Large cells”

The “Large Cells” knitting pattern can be recommended for everyone, but most of all, I think, children will like it. This pattern can also be used fragmentarily, as an insert into the front surface, for example.

To knit a pattern sample, dial the number of loops divisible by 6 plus 2 edge loops and begin knitting:

in the 1st and 9th rows - purl loops;
in the 2nd and 10th rows - with facial loops;
in the 3rd, 5th, 7th rows - slip 1 (thread behind the loop), *knit 4, slip 2 (thread behind the loops)*, knit 4, slip 1;
in the 4th, 6th, 8th rows - slip 1 (thread in front of the loop), * purl 4, slip 2 (thread in front of the loops) *, purl 4, slip 1;
in the 11th, 13th, 15th rows - knit 2, * slip 2 (thread behind the loops), knit 4 *, slip 2 (thread behind the loops), knit 2;
in the 12th, 14th, 16th rows - purl 2, * slip 2 loops (thread before loops), purl 4 *, slip 2 (thread before loops), purl 2;
in the 17th row - repeat the pattern from the 1st row.

Pattern “Two-color large cells”

The “Two-Color Large Cell” knitting pattern looks best when using thick yarn in a contrasting color.

Well, it is knitted with a number of loops that is a multiple of 6 like this:

in the 1st and 7th rows (with dark thread) - purl loops;
in the 2nd and 8th rows (with dark thread) - with facial loops;
in the 3rd and 5th rows (light thread) - *knit 4, remove 2 loops (thread behind the loops)*;
in the 4th and 6th rows (with a light thread) - *4 purl, remove 2 loops (thread before the loops)*;
in the 9th and 11th rows (with a light thread) - 1 knit, * remove 2 loops (thread behind the loops), 4 knit*, 1 knit;
in the 10th and 12th rows (with a light thread) - 1 purl, * remove 2 loops (thread before the loops), 4 purl*, 1 purl;
in the 13th row - repeat the pattern from the 1st row.
Braid of four loops (Cross every 4th row)

Abbreviations: cross 4 loops to the left - remove 2 sts. knitting needle before work, k2. p., 2 persons. p. with auxiliary knitting needles
Panel of 4 loops on the reverse surface.
1st row: (front side) 4 knits. p.
2nd row: 4 p. p.
3rd row: 4 sts cross to the left.
4th row: 4 p. p.
Repeat these 4 rows.
Yarn - “Village” from Troitsk, natural color (1508), 100% wool, 170 m / 100 g, consumption 60 g. 5 double needles No. 3 Knitting density 1.7 loops per cm. Hand girth 20 cm.

Before starting knitting, measure the girth of your hand.

The mittens are knitted on 5 needles in the round, from top to bottom. Let's calculate the number of loops that need to be cast on the knitting needles: 20 x 1.7 = 34 loops, where 20 is the arm circumference, and 1.7 is the horizontal knitting density (Pg). Let's distribute them onto 4 knitting needles: 34: 4 = 8.5. We round up and get: in total you need to cast on 36 loops, 9 on each knitting needle. We will knit the mitten using classic knit and purl stitches, unless otherwise indicated in the description. When knitting in the round with loops made using the second method, the knitting may end up twisted. We mentally assign numbers to the knitting needles to make it easier to explain the progress of the work. Closing the circle, we knit the four loops of the 1st knitting needle together with the end of the yarn remaining on the 4th knitting needle from the set of loops so that the circle closes more tightly along the edge.

Let's start with the right mitten. We will assume that on the 1st and 2nd knitting needles there are loops of the lower part of the mitten, and on the 3rd and 4th knitting needles - the upper ones. We start the work with a cuff, which we knit with a 1x1 elastic band. The cuff is trimmed with stripes: these are strips of red yarn in three rows: three rows along the edge with the main yarn, then three rows of red, again three rows of the main and then three rows of red. Cuff height 7 cm.

We will knit the hole for the thumb of the right mitten on the 1st knitting needle, and for the left one - on the 2nd. To do this, knit the first loop on the 1st knitting needle with a thread of the main color. All other loops, except the last one, are knitted with colored thread. Then we return the loops connected with the colored thread to the 1st knitting needle and knit again with the main thread. We get a colored stroke. This will be the hole for the thumb in the future.

Then we begin to decrease the loops on the toe of the mitten. On the 1st and 3rd knitting needles, at the beginning, we knit the first two loops together with the front one in the second way (at the back walls), having first turned over the 1st loop. On the 2nd and 4th knitting needles we knit two loops together at the end of the knitting needle using the first method (behind the front walls). So we decrease the loops through the circle until each knitting needle has half the number of loops (in our case, when the number of loops on each knitting needle is odd, we decrease the smaller part through the circle - 4 loops), then we decrease the loops in each circle (5 loops). At the same time, on the 1st and 3rd knitting needles, in those rows where we do not decrease the loops, we also turn the first loops over and knit them in the first way. When there are 2 loops on each knitting needle, tighten the loops and secure them on the wrong side.

Now let's start knitting the thumb of the mitten. To do this, carefully pull the colored thread out of the thumb hole. Then we insert two knitting needles into the vacated loops, we get 7 loops on the bottom knitting needle, and 6 on the top knitting needle.

We begin to knit the finger, distributing the loops on 4 knitting needles: on the first 4 loops, on the second 3 and pull one loop from the side edge of the hole, on the 3rd and 4th knitting needles there will also be 4 loops each (3+1 from the side edge of the hole) . To make it more convenient, the end of the working thread can be lowered into the hole (on the wrong side of the product).

We continue to knit the finger in a circle until the middle of the nail, and then begin to decrease the loops in the same way as when knitting the toe of the mitten: on the 1st and 3rd knitting needles at the beginning, on the 2nd and 4th knitting needles at the end, but decreasing We do it in every row. When there is 1 loop left on each knitting needle, we tighten the loops and fasten them on the wrong side.

The left mitten is knitted similarly to the right one, but in a mirror image: we knit the hole for the finger on the 2nd knitting needle.

Mittens for children are knitted according to the same pattern as for adults, in accordance with hand measurements.

“Knitting mittens” using several methods. - from here

But in our master class we offer the most convenient one - circular or as it is also called tubular, performed on five knitting needles in a circle. According to this method, the cast-on loops are evenly distributed onto four knitting needles, and the fifth is used as a working (free) one, which alternates with all the other knitting needles.

The circular technique of knitting mittens consumes from 40 to 100 g of yarn per piece (mitten), depending on the density of the work. Knitting all facial loops is done using the upper segments. The product begins with a cuff, with a circumference equal to the circumference of the hand. It is usually knitted with a 1*1 or 2*2 rib pattern. The number of stitches cast on should always be a multiple. The cuff stitches on all four needles should be on the same row.

Knitting a cuff on knitting needles begins with casting on two knitting needles a certain number of loops. After this, one-fourth of all loops are knitted with each knitting needle in a given pattern. By placing the loops in a circle on the knitting needles, the row is closed. With the circular technique there are no edge loops.

For convenience, the knitting needles can be numbered taking into account the mitten knitting pattern given below. Work is carried out only clockwise. The upper part of the mitten is knitted on the first and second knitting needles, and the palm (lower part) is knitted on the third and fourth knitting needles.

The height of the knitted cuff should vary within 5..7 cm. Having knitted the cuff, you need to smoothly move into the main part of the product. If a “shrinking” pattern is chosen for it (by property), then when moving to it you need to add one loop to each knitting needle. This addition is carried out using the “two loops from one” method. From the cuff to the thumb, the main pattern is knitted about 7 cm (this distance is best measured individually by hand). And then begin to form the hole for the thumb.

In order to create a hole for the thumb on the mitten, you can use two methods. But it should be remembered that for a mitten on the right hand the hole is made on the 3rd knitting needle, and on the left - on the 4th.

1st method. For example, you have 12 loops on each knitting needle and the hole will start on the 3rd knitting needle. So, on the indicated knitting needle, the first loop is knitted as usual, and the remaining ten are removed with a pin or thread (without the last 12th). Next, a certain number of air loops are placed on the right knitting needle, equal to the number removed, that is, 10 pieces. The last loop (12th) is knitted from the third needle, and knitting continues in a circle until the height of the little finger.

2nd method. The first loop on the 3rd knitting needle is knitted with the main thread, and the next 10 - with an auxiliary bright thread and only knit stitches. These 10 loops are returned to the 3rd knitting needle and re-knitted, but now with the main yarn. In this way, a colored streak is formed in the canvas, from which the thumb will later “come out”.

Having reached the height of the little finger on the mitten, you should begin decreasing to form a rounded or pointed end of the product. And again it can be done different methods. Let's look at each of them.

The first method is "spiral ending". According to it, on each knitting needle, the first two loops are knitted together in the lower segments. So the loops in the rows are reduced until there are 2 loops left on each knitting needle. After this, the thread of the ball is torn off, it is threaded into a sewing needle with a wide eye, onto which the remaining loops are strung and pulled together. The thread is fastened from the inside out.

The second method is “decrease with rounding”. To obtain a neat curve on the top of the mitten, you need to knit two loops together on each knitting needle with the lower and upper segments alternately in the middle and at the end of the fabric.

It is very important to remember that the number of rows without decreases should always correspond to the number of stitches connected between two decreases on each needle. Let's say you have 12 loops on each knitting needle, and let's look at the decreases in the attached diagram. The 1st decrease is performed on the first needle: knit 4, knit 2 together, knit 4, knit 2 together. And so on on each spoke. The gap between the first and second decrease should be approximately 4 rows in even knitting. The 2nd decrease starts again on the first needle: knit 3, knit 2 together, knit 3, knit 2 together, etc. The distance between the 2nd and 3rd decreases is three even rows. Continue in the same way as the given decrease technique.

The above methods of decreasing have one drawback: the counting of the loops of the main pattern is disrupted. Therefore, they are recommended to be used exclusively for stocking knitting. So, a mitten can be knitted with the selected pattern, and when decreasing, switch to stocking stitch. And to preserve the selected pattern until the end of the mitten, decreases should be made exclusively at the edges of the product, that is, at the edges or joints between the 1st, 2nd, 3rd and 4th knitting needles.

The third method is “pointed decrease”. It is done in every row. On the 1st and 3rd knitting needles, first two loops are knitted together using the transfer method; and on the 2nd and 4th - two together with the front end behind the upper lobes.

The fourth method is “smooth decrease”. At the beginning, on the 1st knitting needle, the following is done: 1 loop is knitted, the next two are knitted together using the cast-over method, the rest are knitted evenly. On the 2nd knitting needle: the initial loops are knitted evenly, in the last three, two are knitted together with the knit stitch behind the top lobe, and the last one is knitted evenly. On the 3rd and 4th knitting needles, knitting is carried out similarly on the 1st and 2nd. In this way, the loops are decreased through the row until ½ of the dialed-in number of loops remains in the work. Having reached this level, decreases should be made in each row. The last 8 loops are gathered together with thread and pulled together.

When the mitten is almost ready, all that remains to do is tie your thumb. With the previously described first method of creating a hole for a finger, knitting will be carried out from loops removed on a pin or thread and transferred to a knitting needle. And from the formed edge, when casting on air loops, new loops are cast on. The total number of thumb loops should be a multiple of three. All loops are evenly distributed on three knitting needles, the fourth is the working one. The finger is knitted in a circle up to the nail and then the loops are decreased using any convenient method. The last 6 loops are pulled together, and the thread is secured from the wrong side.

According to the second method of creating a hole for the finger, you need to carefully pull out the colored thread (stitch), and carefully gather the opened loops onto the knitting needles. If the resulting hole is too large, you can decrease one loop on each knitting needle.

Having completed the “Mittens”, all that remains is to iron them through the steamer (except for the cuff).

Mittens can be decorated with individual decorative details. But the decoration of the work “How to knit mittens” can also be an unusual pattern circular knitting. For example, when knitting on five needles, the same patterns can be used as on two needles. But you should remember these rules:

If the pattern is shifted from the front side or back (for example, “rice” knitting), then the odd rows are knitted as they are done according to the pattern for two knitting needles.

Even rows according to the pattern are read from right to left, and the loops are knitted with elements opposite to the signs in the pattern.