Rose - very beautiful flower, which can become a worthy decoration of any interior. You can collect a rose on a stem and place it in a vase. You can fold some buds and use them as a decorative element. Or you can just make the kids happy beautiful craft. So how to do original rose using the origami technique from plain paper, you will find out very soon if you want to work with your own hands.
There are many options for assembling these flowers. For example, the diagram is in Russian. However, these instructions are not always completely clear. Master classes convey information better and help achieve the desired result.
A simple version of a paper rose using the origami technique
You need colored double-sided A4 paper. You will also need scissors and glue.
Cut a strip 1 cm wide along the long side. Fold the corner.
Fold it again like this.
Once again you need to bend the corner.
Holding the end of the strip, make one turn.
This way.
Now you need to twist the rosette, making folds all the time, as in the beginning.
Continue in this manner until the end of the strip.
Glue the tip of the paper to the flower. Do the same with the leg by which the rose was held during the assembly process.
You will get this beauty:
You can varnish the finished product or sprinkle it with glitter.
You can also take the wire and wrap it in green paper. You will get a bouquet of roses like this.
This model is well suited for beginners and children.
A more complex rose for more experienced craftsmen
For this craft you need a square of paper, no more than 10x10 cm. The sheet is folded in half.
Then in half again.
The top side of the paper is flattened into a triangle.
Now the workpiece needs to be turned over. And on this side, fold the paper into a triangle, as before.
The right and left corners on one side are bent upward, into a rhombus.
These same corners are bent in half downwards and unbent back.
The small triangles that make up the rhombus need to be flattened, like this.
Bend the resulting pockets in half, down.
Do the same on the other side. It will turn out like this.
Bend the top corner down, making a fold and bend it back.
Open the lower part of the blank like a book.
Attention! Pull the areas shown in the picture and flatten. You should end up with two triangles in a square.
Turn the workpiece over.
Lift the triangle up by pulling it.
The lower right square must be folded diagonally, from top to bottom.
Turn the workpiece 180 degrees and bend the lower right square again.
Place the almost folded flower on left hand. Grasp the walls of the workpiece with your right hand and twist clockwise. The result will be a rose. You can also help with your left hand. Wrap the corners around the pencil, twisting them slightly.
This is what the flower will look like:
It looks good on a scrapbooking card, on gift wrapping, or in a glass vase where you can place several roses of different colors at once.
Model of modules according to diagrams with a description of work
This option is more complicated, but the flower looks very delicate and beautiful.
You need to prepare squares of colored paper, 8 or 15 pieces, depending on how many layers there will be in the rose, two or three. And also glue, because this is a modular assembly.
The square is folded in half, a fold is made and the sheet is unfolded back.
Turn the angle up like a diamond. Take the right corner and fold it inward, along the line of the fold made before.
Also bend the left corner.
Using a pencil, twist the corner a little. The petal module is ready.
The first row is made up of 3 petals. You need to apply a drop of glue to the left corner of one petal and the right corner of the other.
Like this:
Now the three glued petals need to be connected into a circle. Like this.
The first row is ready.
The second row consists of 5 petals. First glue at the top, then turn it over and glue at the bottom.
Modular origami white rose(flower) mk
or What to give your mother on March 8?
step by step production(master class)
">http://bringingsuccess.ru/origami.php
In this video we will learn how to make a paper flower using the modular origami technique.
With such a flower you can surprise anyone who is not familiar with the art of MODULAR ORIGAMI. This flower, or a bouquet of flowers will become very a good gift for teachers, mothers, grandmothers, sisters on March 8, Teacher's Day, September 1. You can also give this paper rose to your girlfriend on Valentine's Day.
Subscribe! There are still many interesting assembly schemes for modular origami ahead.
The total number of modules we will need for the build paper flower, is 110 modules of size 1/32.
Flower height - 6 cm, length - 25 cm.
0:18 We make 3 rows of 18 modules.
1st and 3rd row with the short side of the modules up (SWR),
2nd row – long side (DSV)
1:54 We put on modules with 3 tails
2:34 We make two rows of 12 modules each
3:03 We make a series of 12 SCH modules
3:25 We put the modules on 3 tails of the KSN (8 modules)
4:10 Making the stem
5:23 Making a leaf
5:31 and glue it
6:04 Glue the stem to the flower bud
And now you know how to make origami from flowers (rose) modules. Use this video as a master class on assembling a paper rose flower with your own hands.
Subscribe to our channel to learn about new videos
Here:
https://www.youtube.com/c/ModularOrigami1
And go to our website, in the section dedicated to assembling figures using the modular origami technique (detailed step-by-step instructions) http://bringingsuccess.ru/origami.php ">http://bringingsuccess.ru/origami.php Modular origami Christmas tree decoration rainbow ball (master class). Origami flowers. Origami paper flowers video diagram. Origami flowers. Origami flowers video scheme. 3D Hello Kitty made of paper or What to give your mother on March 8th. Paper flowers - How to make a rose from corrugated paper. Master class night light rose from foamiran #ereminafom. How to make a lily with your own hands (paper applique). Origami Postcard Dress ❤️ Paper crafts. How to make a beautiful vase from paper (origami from modules). Step by step assembly, master class. Craft on New Year's Competition With Your Own Hands. Christmas tree made of paper. Brief MK. Christmas trees of my subscribers. MODULAR ORIGAMI How to make triangular module for beginners.
This article will talk about how to make modular origami. A flower scheme is a whole culture of creating different bouquets. The basis of the crafts are small modules made of multi-colored paper. This technique is assembled like a construction set and allows you to obtain various voluminous flowers. There are a lot of variations of the creation: roses, lilies, cornflowers, daisies, water lilies and even flowers in the form of three-dimensional balls on a thin stem.
Amazing art
Modular origami is an amazing art of creation volumetric figures. This technique originated in China. Thanks to small folded triangles, you can make various variations of houses, animals, plants, cars. Adults and children create unusual souvenirs, garlands, and Christmas tree decorations with their own hands. It all covers The color scheme is very simple to create. Its peculiarity is that the crafts are made up of various small modules. Such flowers are almost impossible to distinguish from real ones. They are decorated with rhinestones, sparkles, foil, and varnish. Finished works are used to decorate the premises of houses, apartments and offices. Bouquets are hung in flowerpots, placed in vases, on bookshelves, and window sills.
Preparing for work
The workplace must have a flat surface. To make origami modules you will need:
- several sheets of A4;
- pencil;
- ruler;
- scissors;
- office glue.
Modular origami for beginners is just the first step in understanding this art. There are various more complex ways of making figures: development, quilling, kirigama, monegami, kusudama. For modular technology, paper or cardboard is used different colors. A sheet of paper is drawn into several equal rectangles. To make the future craft larger, you can cut the sheet into 16 equal parts. If less - by 32.
- 53 x 74 mm;
- 37 x 53 mm.
Creating an origami module
1. The rectangle is folded in half horizontally.
2. Then fold it in half vertically. The workpiece must be returned to its original position. The result is two straight lines along which you can make a module.
3. One side of the workpiece is folded towards the middle.
4. The second mirror side folds towards the middle in the shape of an airplane.
5. The lower part of the workpiece is bent in an even line.
6. The protruding sections are folded.
7. The protruding workpiece is folded upward.
8. The structure is bent in half. Both sides of the module are firmly connected.
Modular origami for beginners covers various variations of creating crafts. Such schemes are very simple. If you follow the exact instructions, even a child will create it on his own. original craft. Let's look at several ways to create flowers.
Modular origami: instructions for creating a lily
To create a lily you will need paper of two colors. You can combine shades to your liking. White and red, orange and gold, pink and yellow look great. You will need 85 modules of one color and 50 modules of another. To create the stem you need to use green paper. You will need 39 emerald modules. In total you will need 174 blanks. This is exactly the amount that modular origami covers. Assembling the lily starts from the center. The blanks are connected into an even ring. 2 rows are created. Each of them uses 5 modules. Thanks to these details, it will be possible to fasten future petals.
To create a flower petal, 1 module is used in 1 row. Then in each row their number increases by 1 piece. In row 2 - 2 modules, in row 3 - 3, in row 4 - 4 modules, in row 5 - 5 modules. Starting from the 6th row, their number decreases by 1 piece. 6th row - 4 modules, 7th row - 3 modules, 8th row - 2 modules, 9th row - 1 module. Since we used 5 modules to create the center, we will need 5 petals. To make the stem, you need to alternate 1 and 2 modules in each row. Odd row - 1 module, even row - 2 modules. The leaf of the stem is assembled according to the scheme: 1, 2, 3, 3, 3, 2, 1. The leaf is attached in the middle of the stem. Stamens are created from white cardboard. The material is rolled into a tube. Then it scrolls around its own axis. The flower is placed on the created stem. The stamens are inserted inside. The modular lily is ready! Another way to create a composition is presented above.
Queen of flowers - rose
A beautiful flower that will perfectly decorate a bouquet, this Modular art covers different creation techniques. The easiest way is shown in the photo. Let's consider the most difficult one in more detail. To create such a rose you will need 9 modules. Three of them have their valves cut off. Then they need to be rolled up. To do this, you can use a knitting needle, a tube, or a wooden stick. The long side of the module should be on the same level, that is, with a flat end. The corners of the remaining 6 modules are bent, creating the illusion of a petal bending. For the base, a small circle with a diameter of no more than 2.5-3.0 cm is cut out. The valves of the three modules are lubricated. Then they are attached to the base. Three more similar modules are glued inside. Modules with cut off valves are placed in the center.
The stem can be made from wire painted in green. You can use a tube or stick, which must be covered with emerald-colored paper. The bud is carefully attached to the stem. To create a greater effect, you can cut out petals from green cardboard. You should get a beautiful rose (origami). Modular art recommends mixing these flowers with other types to create excellent bouquets. Usually, roses are placed in the center. Asparagus, bergrass, fern, gypsophila or ruscus are installed along the edges. Roses look great in combination with lilies, daisies, forget-me-nots, tulips and peonies.
Modular in the form of a ball
To create flowers, it is recommended to use double-sided cardboard or colored paper. It is desirable that the sides of the workpiece be of different shades. Modules of the same size are made of paper. Then they are given a three-dimensional shape. The corners are pinched and glued to each other. Created volumetric ball from multi-colored modules. Rolled paper is used as stamens.
To fasten the workpiece, use tubes, sticks, laces and thin ropes. Various techniques craft creation covers professional modular origami. Kusudama color scheme is one of the rarest and simple ways. If you strictly follow the instructions, you will get a bouquet of unprecedented beauty. Above is another way to create such flowers.
DIY paper roses. Step-by-step instructions with photos
Master class. Roses using modular origami technique.
This master class is intended for all lovers of origami, both classic and modular. And also for all those who care about handicrafts.Purpose: Gift, home decoration.
Target: Making roses from magazine modules.
Tasks:
- Get interested manual techniques: origami
- teach how to make roses from magazine paper.
- develop fine motor skills hands, eye, imagination, aesthetic taste, compositional skills, as well as a love for such techniques as origami.
- strengthen skills in handling glue and paper.
Manufacturing technique:
- Chinese modular origami
Materials and tools:
- PVA glue;
- Candy box or frame (size to choose)
- ready-made origami modules from magazines (you can also use regular photocopier paper)
-cut out circle (size as desired)
The rose has been loved and praised since time immemorial. IN Ancient Greece The bride was decorated with rose flowers, the path of the victors returning from the war was strewn with rose petals, and roses were planted around many churches. During excavations, coins with the image of a rose were found. In ancient Rome, roses decorated the homes of the rich, and at their feasts, guests were showered with rose petals and rose wreaths were placed on their heads. Wealthy Romans bathed in rose water baths. Wine and sweets were also made from rose flowers.
1. We manufacture the module according to this scheme
We take pre-prepared modules and a circle.
2. Bend the ends of the modules and take PVA glue.
3. Glue the folded modules in a circle, and so on for three circles in a row.
4. We glue the core in the same way, only bend the edges a little and place the modules closer to each other.
5. We also make a few more roses.
6. Our roses are ready, now we make petals for them. We also bend the ends of the modules and insert them with the valves into each other.
7.The final touch. Putting the composition together. I didn't have a frame so I used a candy box.
Rose is a symbol of perfection,
Wisdom and purity.
Her supremacy is recognized
Among the colorful flowers.
The queen keeps in the petals,
The secret of tenderness and love.
Everyone can enjoy
The standard of beauty.
A bouquet of roses is charming,
Gives a symbol for each color:
Red is the path to love, recognition,
White is a covenant of purity.
Good luck everyone! Creative inspiration! Thank you for your attention! Don’t judge strictly, this is my first master class, I think you liked it.
