In cold weather you can't do without a warm hat. Not everyone loves fur products, especially the stronger sex. But a stylish men's hat knitted with love and care will be a wonderful gift to a loved one or a friend. Even novice needlewomen can create such a headdress. You just need to pick detailed master class and follow the algorithm.

Choosing yarn for a men's hat, knitted, depends on the season for which it is intended. In winter, wool or wool mixture is preferred. A product made from such yarn perfectly protects against frost, but can be pricked. To soften natural wool, it is mixed with artificial fiber. The optimal yarn composition for the cold season is natural wool with a small addition of acrylic, cotton, bamboo or viscose.

You can knit from threads with down, they are soft and very warm. For a hat with a large knit, thicker threads are suitable; you should not knit them too tightly so that the item gently fits your head. Typically, such products are single-layer. For a two-layer headdress, thinner yarn is taken and knitted more tightly. This will protect you from blowing. Men's knitted hats intended for autumn or spring can be made in single layers. Suitable for them the following types

• yarn:
• Alize Lana Gold - wool blend with acrylic;
• Kartopu Elite Vul - wool blend with acrylic;
• YarnArt Silky Wool - wool, silk;
• Pekhorka Camel - camel hair with a small addition of acrylic;

Semenovskaya Arina - wool.
Alize Lana Gold
Kartopu Elite Vul
Pekhorka Camel
Semenovskaya Arina

YarnArt Silky Wool

• For a two-layer or demi-season hat:
• Alize Superlana Tig - fine wool mixture;
• Alize 3 Mevsim - thin with mohair;
• Yarn Art Angora De Luxe - mohair, acrylic; Trinity Winter's Tale
• - goat fluff;

Pekhorka Crossbred Brazil - merino wool, acrylic.
Alize Superlana Teague
Alize 3 Mevsim
Pekhorka Crossbred Brazil
Trinity Winter Tale

Yarn Art Angora De Luxe When choosing the color of the yarn, you should pay attention to ensuring that it matches the rest outerwear . It is absolutely not necessary to limit yourself to gray and black colors. Deep blue, mustard, beige, burgundy, dark green shades will not make the owner of the hat less masculine. For a younger man, bright colors are suitable - yellow, red, orange. Striped or and scarves even in the most subdued colors will look original.

The knitting needle size suitable for the selected yarn is usually indicated on its packaging. If the product uses balls of already rewound threads, which often accumulate among knitters, the tool will have to be selected by eye. It is believed that the knitting needle should be the same thickness as the thread folded in half.

Often tools of different diameters are used in one product. For example, the elastic of a hat is knitted with thin knitting needles so that it is denser and does not stretch. When moving to the main fabric, take a thicker tool for free knitting.

You can knit a men's hat using either two regular knitting needles or four. Knitting needles connected by a flexible tube are convenient for hats.

You can decorate the finished product using:

• pompom;
• emblems;
• stripes;
• applications;
• buttons;
• contrasting edge trim.

If desired, you can create an ensemble with a snood, scarf, gloves, and mittens. All hand-knitted items in the set are made from the same threads in a similar pattern.

Product sizing

For a simple headdress you need to take two measurements:

1. Head circumference - measured across the forehead and the most convex part of the back of the head. Since the knitted fabric stretches, subtract 2 cm from the resulting length.
2. The height of the hat is measured from the forehead near the eyebrows to the base of the neck. The resulting length is divided in half. If you plan to wear a thing with a lapel, then its height is added to the resulting value. A beanie hat requires extra padding, as it should not fit the top of the head.

After this, the sample is knitted with the selected pattern. From this fragment the number of loops in one centimeter is calculated. Then the head circumference is multiplied by this figure. You should not start knitting without a sample, even if the number of loops is indicated in the manual. Due to the loose or tight knitting style, the size of men's hats may not match taken measurements. In addition, it is necessary to wash and dry the sample in order to know how the item will behave after washing.

Description of the manufacture of various models

For beginner knitters, you should select knitting patterns for hats with diagrams and descriptions. The more detailed the explanation, the easier the work will be. Men's hats are easy to make, knit quickly, and look impressive.

Warm double hat

This headdress has two layers - front and back, which are wrapped inward without going to the top of the head. It turns out a warm base with a neat top.

For the hat you will need:

• 1 skein of yarn YarnArt Merino De Luxe 50 black;
• 1 skein of the same yarn, but Brown for stripes;
• knitting needles No. 3;
• needle and thread to sew the back seam.

Knitting process:

1. We cast on the knitting needles 109 loops (P).
2. We knit 2 cm with an elastic band 1 to 1, that is, we alternate one purl and one knit.
3. We evenly add 13 p. This means that every 7 p we make 1 yarn over. It turns out 122 P.
4. We knit 8 cm in stocking stitch. On the front side we knit all the knit stitches, on the back side we knit all the knit stitches.
5. We continue the fabric with an elastic band 3 to 1. Alternate 3 facial loops and 1 purl. We knit the purl rows, repeating the pattern. Thus we knit 2 cm.
6. We change the thread to brown, continue the work with an elastic band for another 1.5 cm. Then we knit 1 cm with black thread, then again with brown 1.5 cm. We get two strips.
7. Change the thread to black and knit in stockinette stitch 5 cm.
8. We begin to decrease the loops. To do this, divide them on the knitting needle in this way: 10, 18, 18, 18, 18, 18, 10. Mark with a contrasting thread. To decrease, we knit 2 loops together at the beginning and end of each group using the knitting technique. We do this in rows 1, 5, 9, 13, 15, 17, 19, 21 after marking. We do not reduce the beginning and end of knitting.
9. We collect the remaining loops on the knitting needle and tie them off.
10. We sew the edges of the hat.
11. Then we fold the inner layer up to the beginning of the elastic 3 to 1.

The two-layer knitted hat is ready. It will complement a man's wardrobe favorably and will keep him warm in the cold.

Ushanka

A simple master class with a description will help you cope with the work. To knit a hat with earflaps for men, you will need:

• 1 skein of yarn “Arina” (wool with the addition of acrylic);
• knitting needles No. 4;
• hook number 4.

First you need to separately knit two ears and a visor in front, which will then bend upward. For this:

1. Cast on 12 stitches for the ear and knit them in garter stitch, adding one stitch at the beginning and end of each row. When there are 20 P on the knitting needle, knit 14 rows in this way without increments. Start the next row with a set of 8 VPs, and then knit the rest. You will get 28 P, knit them in 20 rows. You will get a finished ear. Secure the loops on a pin or remove them to another knitting needle and set aside the work.
2. Knit the second eye in the same way.
3. For the visor, dial 22 P and knit, adding 2 loops for 4 rows. We get 30 P, knit 24 rows in a row.

Then we collect the related parts. To do this, we sequentially knit all their loops on one knitting needle. Next, we continue working with one canvas:

1. We make 36 rows in garter stitch.
2. Let's start decreasing. In every second row we evenly decrease 7 P.
3. When 20 stitches remain, knit them 2 at a time, then pull them together and secure them.
4. Crochet the back seam.
5. With the same tool we make a binding along the edge of the product. We use the “crawfish step” technique.

Another version of the earflaps can be obtained if you first knit a regular hat with knitting needles, and then crochet the ears and frontal part using boucle yarn.

With lapel

A hat with a lapel fits tighter on the head and additionally warms the ears. A man in such a headdress will look stylish and youthful. To work you will need:

• 1 skein of acrylic yarn, 215 m;
• knitting needles No. 5;
• hook or needle and thread for stitching.

We begin knitting a men's hat by casting on 78 loops on the knitting needles and doing a 2 by 2 rib stitch (2 knit loops, 2 purl loops), knitting 28-30 cm. After that, we begin decreasing:

1. We knit 2 stitches together, knit and purl.
2. We alternate purl and knit stitches.
3. We knit 4 more rows in the same way.
4. 2 stitches together in knit technique to end of row.
5. A row of purls.
6. We knit 2 stitches together, knit together.

Then sew the back seam. The hat with the lapel is ready. It is perfect for the autumn period.

Beanie

A guy wearing a beanie hat will look stylish and youthful. This fashionable headpiece has a loose, elongated crown. Typically, the height of such a hat is 32-35 cm. A men's beanie hat can be knitted in cross knitting with shortened rows. To do this, you need to prepare wool blend yarn Alize Lana Gold, knitting needles No. 5.

One knitted edge will form wedges; for this purpose it is created in shortened rows. We cast on 59 P and start knitting with garter stitch. In the first row we do not reach the edge of 6 P, unfold the fabric and knit in reverse side. In the next row we do not reach the end of 5 P, we unfold it. We continue in descending order until there is 1 P left to the edge.

We begin to add the number of unknitted loops until we reach six again. This will form the first wedge. We repeat the whole process from the beginning and knit this way until the size of the fabric is equal to the circumference of the head. At the same time, the crown itself collapses due to the wedges. Now you can sew the product along the back seam.

On circular knitting needles

It is convenient to create models without a lapel in a circle on five knitting needles. To work you will need:

• Sensational wool yarn from Fibranatura, 166 m per 100 g;
• 5 knitting needles No. 4.5.

We cast on 88 P and distribute them equally among 4 knitting needles. We knit in stocking stitch 28 cm. Then we decrease. To do this, on each knitting needle we knit together the second and third loops, and then the second and third from the end. We do this through a row. The last 10-12 P need to be pulled together with thread.

The hat is seamless, and the bottom edge is curled outward.

Decoding the scheme

If the product involves complex jacquard pattern, braids, arans, openwork, patterns are used for knitting it. To read them correctly, you need to know how they are indicated graphically. different types loops

Loop name	Symbol
Facial	Vertical bar or empty cell
Purl	Horizontal line
Front garter stitch	Cross
Yarn over	Circle or arc with ends up
2 loops together knit with a slant to the right	Right triangle right angle to the right
2 loops together, knitted to the left	Right triangle right angle left
Several stitches together knit	An upside down check mark with a number underneath it
Several loops from one	A checkmark with a number above it
Crossed loops	The required number of cells, united by a broken line

Knitting a hat for a man with knitting needles is not difficult even for a novice needlewoman. To perform accurately, you need to follow the prescribed algorithm of actions. A headdress created with one’s own hands is unique; such a piece of clothing emphasizes the good taste of its owner.

Video

I want to show you my latest works. I don’t pretend to be original, because this is a classic, writes Lyudmila Shulga. Many have already knitted the men's hat “Zigzag Good Luck”,

I also knitted 2 blue ones for my son and husband. When choosing a model, they were categorical: this one! And I agree with them, this model is very beautiful. But, I’m not me if I don’t tie it in my own way. I really like double hats for winter, so these are double ones too.

I used Belarusian threads, 100g in bobbins, high% acrylic. In two threads (6 folds). Dark blue color. It took about 220g for two hats. Knitting needles No. 3. Hats with a volume of 60 cm and a height of 22 cm.

I started knitting with 12 stitches cast on from a ring of thread. On 4 knitting needles, I increased every second row by 2 stitches (at the beginning and in the middle) up to 108 stitches. This turned out to be 12 increases or 24 rows. The result was a smooth distribution of loops into 8 wedges. Next with stockinette stitch. When the lining became 22cm long, I made a row of purls. loops for folding. I didn't follow the description exactly. I chose a simpler option for myself. I knitted an elastic band 1x1. When switching to the pattern, I simply added yarn overs on the side where the stripe sloped (before or after the front one). I always knitted the previous yarn over together with the knit yarn over. Tilt to the right - for the upper lobules, tilt to the left - for the lower ones (faces or faces crossed, to choose from). If all the knit stitches are crossed, the stripe will be sharper. I have both.

Maybe it’s easier for someone to knit according to the pattern. I'll show you my notes.

The pattern seemed very easy, I just tried to knit it tightly. In the photo I will show you it from the wrong side - the stripes are even and flat.

But I chose the front side. The pattern is very embossed. When light falls on the hat, the shadow emphasizes the pattern.

After the stripes I switched to 1x1 elastic. Closed with 6 wedges. Every second row at the beginning is 2 stitches. together. When there are 10 (8) sts on 1 knitting needle, then 2 sts. together 2 times through the row and pulled off the remaining loops. Lining 8 wedges, crown 6 wedges. But on the top of the head, when stretched, both canvases lay very well on top of each other.

My husband and son really liked them, and so did I. They look, in my opinion, cool.

My husband asked me to knit another black hat like this. I'll try to add a photo to this post later.

And for the sake of testing, I will knit it according to option 2.

For those who don’t like to start with a ring: Option 2
Crochet a chain of 108 +1 loops (to complete the circle). From it, pick up loops with knitting needles and knit a couple of rows. Then purl a row and then the pattern. Close the loops of the hat.
Unravel the chain, pick up the opened stitches on the knitting needles and knit the lining in stockinette stitch. Close it in the same way as the cap.

Another men's hat, knitted

Head circumference: about 56-61 cm.
The depth of the cap is about 21 cm.

Materials: HWS Markoma Pittsburgh yarn (40% wool, 60% polyacrylic, 188 m/100 g); knitting needles No. 3.5 and 4.

Knitting density "Pattern" knitting needles 4: 21 p. x 25 r. = 10 x 10 cm.

Cast on 105 on 3.5 needles. close in a circle, place a marker at the beginning of the circle.

Knit 6 rows with rib: purl. p., persons p., 1 p. p., 1 persons. p.*, repeat from * to * until the end of the circular row.

Change the needles to number 4 and continue knitting in the “Pattern”:
1st-2nd rows: purl P.
3-5th rows:
Knit in Pattern until the total height of the product is 14.5 cm, ending with the 2nd row.

Decreases:
1st day:*P2 p., 3 persons. p.*, repeat from * to * until the end of the circle.
2nd row:*P2 p., 1 persons. p., 2 p. together knit*, repeat from * to * until the end of the circle = 84 p.
3rd row:*P2 n., 2 persons. p.*, repeat from * to * until the end of the circle.
4th and 5th row: knit purl P.
6th day:*2 stitches purl together, knit 2. p.*, repeat from * to * until the end of the circle = 63 p.
7th day:*1 p. n., 2 persons. p.*, repeat from * to * until the end of the circle.
8th day:*1 p. p., 2 p. together knit*, repeat from * to * until the end of the circle = 42 p.
9th and 10th days: knit purl P.
11th day:* 1 purl. p., 5 persons. p.*, repeat from * to * until the end of the circle.
12th day:*1 p. p., 2 p. together knit, 1 knit. p., 2 p. together knit*, repeat from * to * until the end of the circle = 28 p.
13th day:*1 p. p., 3 persons. p.*, repeat from * to * until the end of the circle.
14th day: knit 2 stitches together purlwise until the end of the row = 14 stitches.
15th day: knit purl P.
16th day: knit 2 stitches together until the end of the row = 7 stitches.
Cut the thread, pull through the remaining stitches and fasten.

A knitted winter hat for men is not just a comfortable thing, but a fashionable detail that emphasizes individuality. From a large number of models - stocking, bag, helmet, sock, options with a visor, with ears, youth with a pompom - each man can choose the right option for himself. All listed models in this article are given with detailed description, diagrams and master class. A men's hat made with knitting needles does not require a lot of time; it is accessible to beginner craftswomen. If you wish, you can knit a scarf with your own hands to go with the hat.

The knitting pattern must be chosen taking into account the type of yarn, the qualifications of the knitter and - of course - the opinion of the men for whom it is knitted! Special attention you need to pay attention to the patterns that stretch during wear. Before starting work, it would be correct to knit a sample, wet it and pull it. Then let it dry in a loose position. And only after that determine the knitting density and make the necessary calculations on the number of loops.

Cap - stocking

The description is given for two sizes: head volumes 54/56 and 56/58 cm and finished product height 27/28 cm.

We will need:

• half-wool yarn -50g;
• circular knitting needles No. 2.5 and No. 3.

Knitting density 24p. for 32r. correspond to 10cm by 10cm.

Master class and description

Knitting a men's hat is very simple. We cast on 158/170 stitches on knitting needles No. 2.5. Next we knit using a pattern with an elastic band of 1l.x1p. approximately 5cm. In order for the stocking cap for men to fit beautifully around the head, in the next row you need to evenly decrease 30/34 stitches. 128/136p remains. Let's go to sp. No. 3 and continue with knits in the circle. This pattern is knitted about 18 cm, every 17/18 stitches. we make a decrease. To do this, we knit two stitches with one. We continue decreasing in the next 14 rows. In the last row we knit all the loops in twos. The remaining 8/12p. we pull it onto the thread, bring it to the wrong side and fasten it. If desired, the hat can be decorated with a pompom, but only a small one.

Classic men's hat: video master class

cap sock

Simple stockinette hat with elastic

Beanie helmet

For young men, a suitable model is a helmet with ears, made with a jacquard pattern.

Basic calculations are similar to the previous description, but how to complete the pattern, see the diagram in the photo.

This hat with ears can be made with a pompom. A jacquard scarf will also look very beautiful with it.

Zigzag hat of luck: video master class

Hat - bag

A men's hat knitted in the “bag” pattern is simple, tightly fitting to the head. It is laconic, even classic, and does not need to be decorated with a pompom. In principle, it can be considered as a variant of the cap-stocking model. Only the “bag” is shorter.

Our master class for a hat is a bag for men with a length of 28 cm and a volume of 57 cm.

For it you need:

• yarn -100g, for knitting with double thread;
• knitting needles No. 2.5.

Description of knitting a hat - bag

We dial 142p. and knit an elastic pattern 2x2p. 7 rows. From the 8th p.m. We switch to the front stitch pattern. Having knitted 17cm, we proceed to decreasing. The scheme is as follows: in every 3rd r. all loops - two together. The remaining loops are tied onto a thread. Carefully sew up the side seam. The headdress, knitted with your own hands, is ready. This master class can be used not only for beginners, but also for more experienced knitters. As an option, for the bag and stocking models there is a circular, seamless work pattern. A product without a seam is more neat.

Using the patterns and master class of bag hats and stockings, you can knit a fun, youthful hat with a pompom. And if you also knit a scarf, then such a set will be indispensable for winter walks. For this it is better to use multi-colored threads.

We offer several ideas for knitting a men's scarf.

Feminine flared jackets, elegant men's coats, children's raincoats and cardigans have come into fashion. Cute hats will help complete the look with patterns, pompoms or “ears”.

Clothing stores offer many models of hats - men's, women's, children's. However, it is worth spending time and money to find an accessory that matches your overall look. Needlewomen can save money and at the same time knit suitable stylish hats for the whole family. The main thing is to understand all the intricacies of the scheme and understand general principle work. How to knit a hat with knitting needles. You will find knitting patterns for women's, men's, and children's hats with descriptions in this article.

We knit a hat for women and men

Before knitting, you need to choose the right yarn and knitting needles. Yarn depends on the season and model. Winter hats are knitted from yarn with a high wool content, spring hats are knitted with acrylic. Bulky yarn is suitable for models with large patterns and coarse knitting. Thinner yarns are well suited for tight knitting with small patterns.

Hats are usually knitted on circular needles - this way the product will turn out smooth, no seams. The elastic band is knitted on thin needles for density. When moving on to knitting the base, you need to change the knitting needles to thicker ones and add loops.

In addition, you will need markers to mark the beginning of the row and the loops needed when working, as well as a needle, hook and an additional curved knitting needle for braided patterns.

Before you choose and start knitting a suitable model, you need to understand a few general rules, which will be needed when knitting any hat.

How to add stitches on a hat with knitting needles

Usually the increase is made in the next row after the elastic band, so that the product is held more freely (especially when knitting berets). Increases are made in 1-2 rows depending on the model.

You can add loops in the middle of the row different ways. The most convenient methods of increasing are from the previous row and using a yarn over.

You can make a loop from the previous row from a broach, that is, a thread between two loops, or from a loop from the previous row. The broach is thrown onto the left knitting needle and knitted - an additional loop is obtained.

How to knit a hat with knitting needles. Knitting patterns for women's, men's, and children's hats with descriptions are not difficult to find. The main thing is to understand all the intricacies of the circuit and understand the general principle of operation.

If you pick up, pull out and knit a loop from the previous row with your left knitting needle, you will also get a new loop. This will happen most unnoticeably - it will be difficult to find places for increase in the overall mating.

Using a yarn over, a loop is made on the front side: pick up the thread with the right knitting needle and continue knitting. In the next row, knit the added loop behind the back wall of the purl. Otherwise, the addition will stand out as a small hole between the threads.

Hat in stockinette stitch (garter stitch) with knitting needles

Beginners knit simple hats using stockinette stitch or garter stitch. This is the most simple ways work.

Knit stitch involves alternating rows of knit and purl stitches. The canvas will have a smooth vertical pattern on one side (front side), and a pattern in the form of transverse waves on the reverse side (wrong side).

Garter stitch is done exclusively with knit stitches, regardless of the side. The result is simple relief pattern.

Note! The stockinette surface tends to curl up at the edges. To prevent this from happening, first knit an elastic band. You can also “secure” the edges by crocheting them.

How to finish a hat with knitting needles

After the hat is knitted to the desired length, you need to start narrowing the crown. To do this, you need to decrease a few loops in the following rows.
Decrease - knitting two loops together. As a rule, when knitting a hat, rows with decreases alternate with rows knitted according to the pattern. This reduces the number of loops through which decreases are made.

For example, first every 10 loops, then every 9, then every 8 and 7 loops. When there are no more than 20 loops left, pull the thread through them and pull off. This completes the knitting of the hat.

Knitting patterns for hats: diagrams and descriptions

There are a lot of knitting patterns. A variety of braids, braids, diamonds, “bumps,” and “leaves” look good on hats. Also, the main fabric of the hat can be knitted not only with satin stitch, but also with a certain pattern, for example, “rice” or “honeycomb”.

“Rice” is a simple pattern that makes the product airy and embossed. “Rice” is used to knit not only hats, but also snoods. The pattern is well suited for both bulky and thin yarns.

The knitting principle is very simple: the front stitch alternates with the purl stitch. In the next row, the knitting changes: knit is knitted purl, purl is knitted.

“Honeycombs” are knitted with a thread thrown over. To do this, you need to cast on an even number of loops. Knit a knit stitch in the 1st row, then put the thread on the right knitting needle and remove the loop from the opposite knitting needle, repeat the rapport to the edge.

The second row is created like this: purl, throw the yarn over onto the right knitting needle, knit 2 loops, transfer, knit 2, etc. Row 3: yarn over, remove the loop, knit together with the yarn over, repeat the rapport to the end. 4th row: knit 2, yarn over, repeat again until the edge. Row 5: knit a yarn over and a loop, slip a double crochet, repeat. 6 knit like 2. From the 7th row, the repetition of rapport begins - rows 3-6.

“Braid” is the most common pattern for hats and the simplest, especially for beginners. For this you need to prepare an additional short knitting needle.

As an example, cast on 14 stitches in the usual way and knit rapport:

• remove the edge;
• purl 2 stitches;
• knit 8;
• knit the remaining loops purl;
• repeat steps 1-4 3-4 times (the length of the braid depends on the quantity);
• repeat step 1-2;
• throw 4 loops onto a short knitting needle and leave before knitting;
• knit 4 knit stitches of the row;
• return the loops from the knitting needle to the left one and knit them with knit stitches (if convenient, you can knit them immediately with an additional one);
• finish the row by knitting the purl loops;
• repeat rapport (points 1-9).

Note! The number of loops must be even so that the loops can be equally divided into two parts.

Braids can be knitted different lengths and width, as well as tightly to each other or through purl loops, depending on the model and yarn. Denser and thinner braids are knitted in 3-6 rows on 4-8 loops. Wide braids are best knitted every 10-15 rows on 10-14 loops.

There are many other warp knit patterns. When choosing a pattern, you need to pay attention to its density: how denser pattern, the better the heat will be retained, which is important for winter hats. Summer and spring hats allow mesh or openwork patterns (“ladder”, “shells”, “peacock tail”, “leaves”, etc.).

How to knit a winter hat for women (with description)

Winter hats are denser, softer and more voluminous than spring hats. To knit them, you need yarn containing at least 50% wool (alpaca, merino, camel, sheep). To add volume to knitting, you can fold thin threads 2-4 times.

Takori hat made of mohair knitted (knitting pattern)

A takori-style hat can be considered a universal model, since it can be worn in different variations: as a stocking cap, with one or several cuffs. Takori is a very soft and voluminous hat. This pattern is knitted quite simply with English rib and will appeal to beginning knitters.

To create a takori hat you will need Angora yarn (100 g/500 m), 4.5 mm circular knitting needles (can be knitted on two knitting needles), markers, and a large knitting needle.

The thread is folded in half(the beginning and end of the ball are connected) and 70 loops are cast on (head circumference 56-58 cm).

Knit rapport: yarn over, remove loop, knit, repeat. All even rows - yarn over and the loop behind it, purl, yarn over, remove the loop, etc.

Alternating rows, knit to the desired length (approximately 32 cm), and then change to a 1x1 elastic band: knit a loop with a purl crochet, 1 knit and then in the circle. Subsequent rows (about 3 cm) are knitted according to the pattern.

Work through a decrease row, knitting every 2 stitches together.

Cut the thread about 10 cm from the needle and thread it through the needle. Pull the loops and secure the thread.

Knitted hat with a lapel

A classic hat with a lapel is knitted with an elastic band 1x1 or 2x2 (knit and purl). After knitting 5-7 cm with an elastic band, you need to change the knitting in a checkerboard pattern: knit the front loops with purls, and the purls with the front ones. In this way, a line of inflection of the lapel will be outlined, along which the edge can be folded. Continue knitting with an elastic band for another 5-7 cm.

Important to remember! An elastic band made from soft yarn stretches well, so it is important to make it the size of your head or a little narrower.

When the elastic is completed, you can move on to the main part of the hat and knit it with the desired pattern.

Double knitted hat

This is a warm two-layer hat. There are quite a lot of options. The easiest way is to knit in satin stitch on stockinette and circular needles, starting from the crown. In essence, you should end up with a stocking closed on both sides.

Roll the thread into a ring and, inserting the knitting needles through it, cast on 12 loops, 3 loops on each knitting needle. You can also type it in the usual way, but then you will get a small hole in the middle. Knit a row with knit stitches.

Increase 8 stitches per row 12 times: 1st row - knit, increase, knit, increase, knit (so on each knitting needle). Subsequent even rows are knit rows. Row 3 – knit, increase, knit 3, increase, knit, etc. (inc on each needle after the first and before the last stitch). The result should be 4 wedges.

Once 24 rows are knitted, change the knitting needles to circular ones and start knitting in satin stitch 122 rows, marking the wedges and the edge of the row with markers.

Decrease (guide by markers) 12 times: row 1 - knit, slip, knit, throw the previously removed loop over it, knit to 3 outer loops (to the marker), 2 together, knit, etc. There are 24 rows in total.

Tighten the last 12 loops with working thread.

Knitted thick yarn hat

Simple hats with a simple pattern are knitted from thick yarn quite quickly. Thick yarn is considered to be skeins weighing 100 g and no more than 140 m long. Accordingly, you will need large knitting needles from 8-10 mm, depending on the thickness of the thread.

Typically, 30-40 loops of thick yarn are cast on knitting needles and knitted in the round using garter stitch, ribbed stitch or satin stitch. There is no need to make any additions; the classic subtractions are made.

Knit a hat for spring with knitting needles for a woman - new models

In spring, you can get creative and knit not only warm, but also beautiful hat models.

Knitted turban hat

A simple turban is knitted with English elastic 1x1 in a single piece of approximately 12x90 cm (you should get a narrow scarf). Having knitted the scarf to the desired length, close the loops in the usual way. Then the finished fabric is collected into a turban and stitched.

Try the scarf on your head, wrapping it like a turban. The middle of the scarf is the back of the head, the two ends cross each other on the forehead and bend back. To understand which sections need to be sewn, it is recommended to mark them with pins.

The edges are sewn through the side loops at the back and on the sides on the wrong side.

Important to remember! To correctly calculate the size of the hat, you need to knit a sample of 10 loops for 10 rows, wash, dry and measure.

Women's hat knitted with description and diagrams

Knitting a beret from a hat is distinguished by mandatory increases in 1-2 rows after the elastic band. This will help expand the knitting to the desired diameter.

The elastic band of the beret should fit snugly on your head.. As a rule, it is knitted 1x1 or 2x2 and has a length of 2-7 cm. After 5-6 rows from the elastic, uniform decreases are made.

Hat with English rib (2x2) knitted

It's pretty simple model, similar in design to a takori hat.

You will need a relatively thin thread containing acrylic, for example, Alize Lanagold yarn (100 g/240 m), as well as 3.5 mm circular knitting needles and a needle.

How to knit:

1. Cast on a multiple of 4 stitches on the knitting needles.
2. Knit according to the classical principle English gum, but knit 2 loops each: 2 knit stitches, 2 slipped double crochet stitches, next row - according to pattern, etc.
3. Having knitted to the desired length, switch to 1x1 elastic: knit knit, 2 together with knit yarn over, purl and then in the round.
4. Knit the next rows according to the pattern(5-6 cm).
5. Make decreases as when knitting a takori hat.
6. Thread the cut thread through the needle and pull it through all the loops.

Knitted hat with braids (diagram)

There are many options for this model. In simple classic hat braids of 4-6 loops are separated by 2-4 purl loops.

Cast on a multiple of 2 stitches on the knitting needles and start knitting 2 knits, 2 purls (2x2 rib) in the round. After 5-7 cm of knitting, change the knitting needles to thicker ones, switch to satin stitch and add loops every 3 loops.

To knit repeat for braid: knit 6 knit stitches, 3 purl stitches, 6 knit stitches, etc. After knitting 4 rows, knit the braid on the front loops, and then repeat the rapport from the beginning.

Having knitted to the desired length, make decreases: knit every two loops together, then knit 2 rows according to the pattern, then decrease again, knit a row according to the pattern, 2 rows - decreases. Pull the last loops together.

If you alternate through an equal number of rows of braids with a knitting needle behind and before knitting, you will get a “braid”. For example, one row - 120 loops, one braid consists of 12 loops, respectively, around the hat you will get 10 wide braids.

10 rows are knitted in satin stitch, then a row with braids is made: remove 6 loops on the third knitting needle and put away for work, knit 6 loops of the row, and then loops from a short knitting needle. This is how the whole row is knitted. After the next 10 rows of satin stitch, the order changes: 6 loops on the auxiliary needle remain before work, and so on.

It is important to know! Braids slightly compress the diameter of the hat, so it is necessary to add a large number of loops in 1-2 rows (there can be 15-40 increments in total) so that the braid does not interfere with putting on and taking off the product. After knitting a row “obliquely”, you need to try on the future hat: the pattern should not compress the head.

Knitting pattern for a Kubanka hat for women (with description)

Kubanka hat - pretty original model, characterized by a rectangular shape. The complexity of this model is that when moving from the crown to the bottom of the cap, it is necessary to tie a roller.

For size 57, cast on 4 mm needles for 130 stitches. Knit approximately 4-5 rows with a 1x1 elastic band, and then, without adding loops, proceed to knitting the main part of the hat up to the crown (you can make a suitable pattern).

Make a roll by knitting 8 rows with a 1x1 elastic band. It is necessary to connect the 1st and 8th row: pick up the loops from the first row of the elastic band and purl each loop of the 8th row.

Divide the number of loops into 7 parts, set markers - guidelines for decreases. Continue knitting in satin stitch, decreasing 7 stitches in each front row (knitting without decreasing on the purl side). The result should be 7 wedges. Tighten the last loops with thread.

How to knit a fashionable hat for a girl with knitting needles

As a rule, all hats are knitted according to the same principle. However each model has its own characteristics, which can cause difficulties when knitting.

Knitted hat with ears

A cute simple hat with ears is knitted in garter stitch in the round or like a takori: English or classic elastic, but is not closed with decreases. Having knitted the hat above the crown, you need to close the loops in the usual way. The result is a pipe open on both sides.

Ears are made from the upper edge of the “pipe”. To do this, you need to sew the top of the hat, starting from the center, from the wrong side (connect the wrong loops together). To make the ears stand out more clearly, you can sew the corners diagonally, separating the ears from the main part of the hat.

Beanie hat (stocking) knitted: knitting pattern

This is a simple pattern that even beginner needlewomen can handle knitting. Usually the “stocking” is knitted in garter stitch without patterns. This model differs from all others in its rounded top and rather long length (the top of the hat should fall off the head).

To knit this model you will need thick yarn, for example, “Nako Jersey” (100 g/74 m) or Trinity yarn “Melody” (100 g/100 m), 6-7 mm knitting needles, and a needle.

The stocking cap is knitted in vertical and short rows. To do this, you need to cast on 45 loops on one knitting needle (along the length of the hat) and knit 40 loops. The remaining 5 loops are not knitted and remain on the right needle.

Unfold the work and knit in the opposite direction in garter stitch. In the 3rd row, knit 41 loops, leaving 4. In the 5th row, 42 loops are knitted, in the 7th - 43 loops, in the 9th - 44, in the 11th - 45. From the 13th to the 22nd row, knit stitches are knitted. The 23rd row is knitted as 1 and further (rows 1 to 22 are repeated). The result should be a wedge.

Note! The upper part of the beanie should be slightly narrower than the lower part due to the wedges.

Repeat knitting until the desired width is achieved (5-7 wedges). After the last row, the working thread should be at the top (if this is not the case, knit another row). Close the loops with purls, cut the thread, leaving 15 cm. Pull the thread through the needle and sew the hat lengthwise (bottom to top). At the top, thread the needle through the purl loops in a circle and pull off.

Knitted pumpkin hat

The model has a pointed top. You can wear this hat with or without a lapel.

How to knit:

1. Cast on loops to size.
2. Knit in an elastic pattern of 2 knits and 3 purls.
3. Having knitted to the top of the head, make decreases in the circle on the purl loops: 1 purl, 2 together, etc. (you will get a regular 2x2 elastic band, knit according to this pattern for about 7 cm).
4. Make decreases on purl stitches (1st row).
5. Knit a row according to the pattern (2 knits, 1 purl).
6. Pull the yarn through the last stitches and pull off.

Gradient knitted hat

Gradient hats look unusual due to the smooth transition from one color to another. The secret of this knitting is that a second color is gradually added to a thread of one color.

In order for the transition to be smooth and not contrasting, it is necessary to prepare a thin thread and fold it 3-10 times depending on the thickness. Having knitted the bottom of the hat, begin to gradually replace the threads with a different color: first change 1 thread, then 2, 3 and so on until all the threads “change” color.

You need to mentally calculate when to change the color. For example, if the working thread consists of 3 threads, then you need to mentally divide the hat into 4 parts: part is knitted in one color, part with 1 thread of a different color, part with 2 threads, part with a different color.

Knitted hat with pompom

The pompom beautifully complements the hat and can hide minor imperfections on the top of the head. The simplest pompom can be made using cardboard “donuts” or a special circle.

Cut out 2 circles from cardboard with round holes in the middle - “donuts”. Cut the threads about 50 cm long and start wrapping them around the cardboard in a circle through the middle. For convenience, when the central hole is tightly wrapped with thread, you can use a needle.

The tightly wound threads are cut in a circle (the cut is made along the edge) to the cardboard. Move the cardboard rings slightly apart so that you can conveniently pull and tie a skein of thread in the middle. After this, the rings are removed or cut, and the pompom is formed into a ball. Protruding threads and irregularities can be trimmed with scissors.

Knitted men's hat (diagram with description)

There are models of hats that are more suitable for men than for women, for example, a hat with earflaps or a hat-helmet.

Ushanka hat knitted

Hats with earflaps, depending on the thickness of the yarn and lining, can be either winter or demi-season. The main difficulty in performing this model is knitting the “ears”. This is where knitting begins, so that the hat turns out smooth, without seams.

Interesting fact! The prototype of the usual hat with earflaps is the army cap of the White Army. Initially, it was exclusively a men's headdress.

A simple one-sided hat with “ears” is knitted in garter stitch (can be knitted in satin stitch). To work, you will need yarn of medium thickness (for example, 100 g/120 m), circular and regular knitting needles 4-6 mm, and a needle.

First, cast on 12 loops on the knitting needles and knit 8 rows, adding 1 loop at the beginning of each row in the usual way. Knit 14 rows without increases. Cast on 8 stitches at the beginning of the row and knit 20 rows. Knit the second “eye” in the same way.

Cast on 22 loops and knit the visor 4 rows, adding 2 loops at the beginning (there should be 30 loops on the knitting needle). Next, knit 24 rows without increases.

Connect the knitted parts using circular knitting needles, knitting the loops of one “ear”, then the loops of the visor and the loops of the second “ear”, close the knitting into a ring. Knit in the round for approximately 36 rows.

Decrease evenly across rows of 7 stitches. When 20 loops remain, decrease in each loop (10 loops remain). Pull the thread through and tighten.

Knitted helmet hat

This pattern is quite difficult to knit, as it ties the head from the crown to the shoulders.

Usually, the helmet is knitted from top to bottom. First, stitches are cast on 4 double needles (8-12 stitches) and rows are knitted in the round with increases at the beginning and end of each needle. When the circle is large enough in diameter (around the head), you can switch to circular knitting needles and knit further in the circle without increasing to the forehead line.

Transfer the loops across the width of the face to a large pin and leave them, do not knit. Knit back and sides. When the length reaches the neck, cast on additional loops, close the circle and knit the neck. For the shirt front, cast on additional raglan stitches at the top and knit to the required width.

Tie the front part with an elastic band and close the loops.

Knitted sock hat

The men's sock hat is knitted like a women's beanie hat., that is, you can start from the side and knit in short rows.

There is another option: knit in the round with a thick 1x1 rib, and then divide the stitches in the row into 3-5 wedges, place markers and start decreasing through the row, focusing on the markers. Tighten the remaining loops with thread.

Hat made of thick yarn with knitting needles (knitting pattern)

From thick yarn for men you can knit similar to female models. The only thing difference - drawing and pattern. For men, a more strict, geometrically correct pattern will suit a coat or jacket.

Most men's large knit hats are knitted with elastic bands, garter stitch, satin stitch, and vertical braids.

It is important to know! Woolen items must be washed only by hand at a water temperature of no more than 30 degrees, including when rinsing. Wool clothing should not be twisted and can only be dried in a horizontal position. This will help avoid deformation of the product.

Children's hat knitted

Baby hats often resemble bonnets, meaning they cover the entire back of the head and are tied under the chin. This is the main feature of such models. Otherwise, hats for children are knitted according to the same principle as for men and women.

Knitted hat for a newborn

A simple cap for a newborn of any gender is knitted using satin stitch from acrylic or wool blend fine or medium yarn, approximately 100 g/150 m.

The cap is knitted on two needles as follows::

• cast on 42 loops;
• knit 2x2 rib for about 8 rows;
• switch to satin stitch and knit 22-25 rows;
• close the loops in the usual way.
• As a result, fold the resulting rectangle of fabric in half and sew the upper edges together through the edge loops. Sew a lace or rope of yarn to the bottom edges.

Knitted hats for boys (with description)

For boys, you can knit earflap hats with ties, helmets or regular stocking hats. The hat can be decorated not only with three-dimensional patterns, but also with a jacquard pattern.

Knitted hat for girls

A simple hat for a girl is knitted in various patterns, both large and small knitting. The finished hat can be decorated with knitted flowers, beads or decorative buttons.

The easiest way to knit a hat is with an elastic band and garter stitch.. To do this you will need fairly thick yarn (100 g/100 m) and 7 mm knitting needles.

Cast on 72 stitches on circular needles and form a ring. Knit 2x2 rib for about 15 rows. Next, switch to a pattern of alternating 2 front and 2 back rows. Knit up to row 29.

From the 30th row, make decreases: in the 1st row - every 12 loops, in the 3rd row - after 11 loops, in the 5th - after 10 loops, etc. until 18 stitches remain. Pass the thread through the loops and pull off.

Owl hat for spring for a girl, knitted: diagram with description

A beautiful “Owl” hat with an ornament and “ears” is knitted on 4 mm circular needles with 100 g/130 m yarn.

First, cast on 64 stitches and knit 4 rows in satin stitch. Next, knit 2 rows according to the pattern: 26 with the wrong side, 12 with the front side, 26 with the wrong side. Starting from the 7th row from the beginning, start knitting the pattern on 12 central loops (the remaining loops are knitted purl). Knit even (purl) rows according to the pattern.

In the first row, alternate knit 3 and yarn over in the middle. In the 3rd row, knit 3 loops, then yarn over, knit 9 with “rice”, yarn over, knit 3. Rows 5 and 7 are knitted like 3, but in the middle knit 11 and 13 stitches, respectively, with “rice”. In rows 9-15, knit 3, knit 13, knit 1.

Rows 17 and 19 – knit 3, decrease, 7 “rice” (in 19 – 5), decrease, knit 3.

In the 21st row, make a braid on 6 knitting needles, leaving the extra one for work. Knit the front and again the braid on 6 loops.

In rows 23, 25 and 27, 13 stitches are knitted in stockinette stitch, row 29 is knitted like 21.

31 (33) row – 3 (2) knit, 7 (9) purl, 3 (2) knit. Row 35 – knit 1, purl 11, knit 1.

From the 37th row, knit the next 9 rows with purl stitch, and then bind off the loops and decorate the protruding ears.

Note! For children's clothing, it is necessary to select hypoallergenic yarn specifically designed for children. As a rule, such yarn contains acrylic, merino wool or fiber. These materials do not cause irritation, clothes do not rub and lie softly on the body.

How to knit a beautiful, simple women's hat for beginners: a step-by-step guide

So, knitting any hat pattern can be divided into 5 main stages: elastic, increase, warp, decrease, close. Depending on the features of the models, some steps may be missing. For example, if you start knitting a hat with a 1x1 elastic band, and then switch to English or patent gum, then there is no need to make increases - the knitting will turn out fluffy.

You can also skip the first stage, that is, start knitting immediately from the main pattern. If you immediately knit with satin stitch, the edge will most likely curl into a small roll - you will get an original lapel.

The general knitting pattern includes the following steps:

1. Cast on the number of stitches on stocking or circular knitting needles according to the size of your head, based on the preliminary sample.
2. Knit an elastic band 1x1 or 2x2 5-7 cm (sometimes you need more or less).
3. Switch to larger knitting needles (1-2 mm larger) and increase in the next row after the elastic (5-40 increases).
4. Knit in the round with the main pattern.
5. At the top of the head, begin to close the knitting, evenly decreasing several loops in a row, alternating rows with decreases with regular rows according to the pattern.
6. Using a needle, pull the thread through the remaining 6-20 loops, pull and secure the thread at the top of the head.
7. Wash the finished product and dry it.
8. If desired, decorate the hat with a pompom (ready-made or homemade).

How to crochet a hat

A simple hat is crocheted from the crown using single crochets and gradually adding stitches. When the diameter of the head is reached, it is necessary to knit the hat to the end without any increases.

Knitting hats: models and patterns for free

In the educational video below you can see how to knit a hat.

Knitting patterns for women's, men's, and children's hats with descriptions are shown in detail in the following video clip. Look.

The models presented are a few of the masses possible options hats Each needlewoman can come up with her own original model, draw a diagram, or combine two models into one. The main thing is to start knitting, and then the Internet, patience and acquired skill will tell you.

A hand-knitted headdress is not a factory stamp, but an exclusive item, long-term and painstaking work of a master. How to knit a super yourself fashionable hat, determine the size, accurately cast on loops for the initial row, learn to read the description and diagrams of the selected model and many other nuances for beginners and professionals you will learn by reading the article.

To knit a hat you need yarn, knitting needles, knowledge simple patterns and the ability to determine the size of a headdress. We choose the material for knitting hats depending on the time of year - these are wool, cotton and synthetic threads. For children we select yarn that does not cause an allergic reaction

Every needlewoman strives to use natural yarn for knitted items, but this is not always justified. The hat is made of 100% wool thread, without the addition of synthetics, and when washed it “runs down” (loses its shape). It is better if the composition is the golden mean - 50% natural, 50% synthetic fiber - blended yarn.

For work, it is important to choose the right knitting needles, the diameter of which must correspond to the thickness of the thread. Knitting needles are made of plastic, wood and metal.

When working - knitting in the round, take five stocking needles or knitting needles with fishing line. You can work on two knitting needles, the result is a fabric that will have to be sewn together at the end of the work, the hat will have a seam.

Knitted hat: diagram and description of patterns for beginners

Beginners mastering the wisdom of needlework need to learn three basic patterns: purl stitch, knit stitch, simple elastic band.

Pattern: Purl stitch (garter stitch)

The classic pattern is available for debutants, easy to make, always looks modern, and is one of the main patterns for knitting hats.

• 1 row: all there
• 2nd row: all inside out

Pattern: Stockinette stitch (stocking stitch)

This knitting can be called a classic of the genre; often masters in their works turn to a textbook, simple pattern.

• 1st row: all persons P
• 2nd row: all out. P

Pattern: Elastic

The most common knitting, most often we start working on products with this pattern:

• 1 row: 2p. persons and 2p. purl
• 2nd row: as we see in the picture

Pattern: English rib

A popular knitting pattern for scarves, hats, and sweaters, it looks great with bulky yarn and large knitting needles.

• 1st row: persons p, out. P
• 2nd row: persons p, yarn over, purl. p, remove without knitting
• 3rd row: knit like the first row

Simple patterns for knitting hats with knitting needles, diagrams and descriptions of work - help for those who study and understand the basics of needlework.

Knitted hat sizes: table

In order for the hat to be the right size, we will learn how to determine it correctly. To do this, measure the circumference of the head, stepping back 1 cm from the upper edge of the auricle and eyebrows. We compare the result obtained with the data in the table and determine the depth of the header.

Table of head size and depth of knitting hats

How to correctly cast on the loops so that the hat is the right size?

The thickness of the yarn does not always coincide with that recommended in the description of the models: either the size indicated is larger or smaller than required, it is necessary to “fit” the headdress correctly. To do this, we knit a control sample, approximately 10 cm in length. Close the loops and measure its width.

Let's say we are knitting a hat with a head circumference of 50 cm, do we need to know how many stitches are required to start working? We measure the width of the control sample: it turned out to be 10 cm, and we scored (hypothetically) 25 loops.

Determining the number of loops for a hat: nproportion x = 50 x 25: 10 = 125 loops

Conclusion : for a size 50 hat, you need to cast on 125 loops and knit 17-18 cm in length, as indicated in the table above.

How to knit a hat for a woman?

Those who skillfully use knitting needles will not have any difficulty knitting a collection of hats of different styles for their wardrobe. A women's knitted hat can compete with other types of knitted products in terms of the number of styles and colors.

How to knit a hat with braids using knitting needles?

The popular braid pattern can be easy to perform - for a beginner, and difficult - for professionals who are masters of knitting needles.

Harnesses and braids, knitting is very popular, used for various models of hats.

Let’s get acquainted with this season’s fashionable “braid with shadow” hat style, made with yarn that creates a visual graduation effect.

To create such a hat you will need pink and purple yarn in two threads:

Knitting with pink thread and then purple creates an unusual effect - a smooth transformation of one color into another, without delineating boundaries.

Step-by-step work:

1. We cast on 80 loops with pink yarn, taking into account its thickness (the thicker, the shorter the length in the skein).
2. We knit a 5-6 cm pattern with a simple elastic band (1x1).
3. Next, we make the main braid pattern (diagram below) with 5 cm pink yarn.
4. We knit the next 10 cm with purple thread, after 5 cm we begin to decrease the loops. The hat can be made longer if we knit the main pattern 10-15 cm more than indicated in the work pattern.

Braid pattern of 12 loops

How to decrease stitches on a hat with knitting needles?

At 15 cm from the rim we make a gradual decrease in loops:

• Row 1: knit stitch, count 8 stitches, knit two stitches, etc.
• 2.4 row: purl
• Row 3: knit stitch, count 6 stitches, knit two stitches each
• Row 5: knit, count 4 stitches, knit two stitches together
• We collect the loops remaining on the knitting needle with a needle with a large eye.
• We decorate the top with a pompom or a piece of natural fur.

Video: Knitting a hat with knitting needles in the “Braids” pattern

This headdress is the best option for the cold season.

How to knit a turban hat with knitting needles?

Beauty is a great force that influences modern fashion and style, which was clearly demonstrated by the charming singer Kylie Minogue. She complemented her look in a fur coat (for which it is difficult to choose a headdress) with a turban hat (turban) - a forgotten, without foundation, model from the distant seventies of the last century. Knitting masters hastened to add newfangled headwear to their collection.

Hat - turban without knitting, from a scarf

• Take the scarf, fold it and sew it together as indicated in the photo and drawing.

• Fold B,A(fold)
• Seam(seam 8 cm)
• Graff(depth)

Turban hat made of knitted fabric

1. We knit the fabric with a simple elastic band or knit stitches
2. The length and width are determined by the circumference of the head
3. When the fabric is ready, we twist it around the head in an original way and sew it together, as shown in the diagram above.

• Edith-Piaf turban hats

A turban hat is an elegant headdress; the shape and pattern of such a product depend on the knitter’s imagination. A turban will perfectly complement the image of a woman in a fur coat or demi-season coat.

How to knit a voluminous hat with knitting needles?

A very fashionable and stylish voluminous hat is a popular model for young people, both boys and girls.

Little tricks for knitting a voluminous hat:

1. We choose thick and fluffy yarn or combine it into two or three threads, use large diameter knitting needles
2. We knit the elastic band or headband with knitting needles of a smaller diameter (let’s say No. 4) than the main knitting (knitting needles No. 6)
3. We choose textured, volumetric, relief patterns:

• English gum
• lumps
• all kinds of braids, plaits
• diagonal stripes
• astrakhan knitting
• various leaf patterns

Volumetric patterns

Relief patterns with cloque effect

How to knit a hat with a lapel?

A model of a headdress with a turned-up edge - a lapel - can be of any style, pattern, male, female, children's version.

How to make a lapel on hats of different styles:

1. If you start knitting a hat with an elastic band, make it wide, not the standard length (7-8 cm), but much longer (15-25 cm), it is easily adjustable. We wear the model in two ways, with and without a lapel, like a voluminous hat.
2. The hat is completely knitted with one of the elastic patterns; if we plan to wear it with a lapel, we knit it 5-20 cm longer. Such a headdress can transform, change shape: we make a lapel, it becomes smaller in size, and if we unfold it, we get a stocking hat.
3. It must be remembered that the lapel should look the same on both sides, so you need to choose an appropriate pattern that is identical from the front and back.

Video: How to knit a voluminous mohair hat with a double lapel?

How to knit a men's hat with knitting needles?

Knitted hat- a sought-after and popular headdress among the stronger half. Women who own knitting needles can knit a fashionable, warm hat for their beloved man, which can compete with branded models.

The line between a woman's headdress and a man's is leveled, there is only a difference in the choice of color, less often used openwork patterns, minimum decoration.

How to knit a winter hat for men?

A warm hat requires careful selection of yarn. It should be soft, skin-friendly and warm. Different types of wool yarn are chosen as the main material for hats.:

• mohair
• thread with the addition of goat, arctic fox, rabbit fluff
• sheep wool
• camel hair
• cashmere
• angora
• alpaca (llama)

When choosing a headdress based on shape, preference is given to a small beanie hat. It fits in your pocket, universal for all seasons. For winter you can knit great option headdress - a double hat or insulated with a special lining.

How to knit a double hat with knitting needles?

• The picture shows a hat in an elongated form, one is inserted into the other and a small lapel is made.

• Double hat knitting pattern

To work you will need:

• Yarn in two colors, dark brown and gray. Composition: wool with a small amount of synthetics (acrylic, polyester)
• Knitting needles with 3.5 mm fishing line

Description of knitting a double hat:

We start knitting from the middle of the product, in the figure the place is indicated with a red line. To be able to knit in one direction or the other, we make a Turkish set of loops (the video below describes this in detail):

1. Divide 56 cm (hat length) into two parts, each half 28 cm
2. We cast on loops taking into account the length of the head circumference and the control sample
3. We knit the first hat, without a pattern, 20 cm in stockinette stitch
4. We start the second hat again from the middle in the opposite direction, picking up the thread on the remaining open loops
5. We will knit 12 cm of knits. using satin stitch and (8 cm) we knit an ornament

How to close a hat with knitting needles?

1. Smoothly decrease through one row of 8 loops in the front rows until 10 stitches remain on the knitting needles
2. We collect 10 sts with a needle and thread and tie them together

Video: Turkish loop set

How to knit a simple hat with knitting needles?

For beginner needlewomen the best option test your strength - simple hat

Description of knitting a simple warm men's hat:

• size 58
• pattern simple elastic band 2×2

To work you need to take:

• thick threads, wool 30% + acrylic 70%
• stocking needles (5 pcs) No. 7, No. 8

Anyone who knitted a sock on 4 knitting needles will find it much easier to complete the job.

We do the work:

1. Using knitting needles No. 7, cast on 72 stitches and distribute evenly, 18 for each
2. Knit like a sock with 1x1 rib
3. After 6 cm we change the knitting needles to number 8, shift the pattern by exactly two loops, i.e. we knit purl stitches in place of the knit stitches and vice versa
4. After 15 cm we decrease the loops

How to finish a hat with knitting needles?

The elastic pattern of the hat is simple and convenient for decreasing stitches, it looks smooth and neat:

1. We start decreasing with purl stitches
2. We knit the next two rows according to the pattern, so that the decrease is not sharp
3. We connect all the front loops of the elastic band together with the front one, and we knit the purl ones without changing
4. We knit the next two rows, as we see, according to the drawing
5. We connect the remaining knit and purl stitches on the knitting needles in pairs with a purl stitch.
6. Fastening row purl knitting
7. We connect the remaining loops by pulling a needle and thread through them

The men's sports hat is ready, you need to wet it, steam it and you can put it on.

Video: Knitting a simple hat with knitting needles

How to knit a baby hat with knitting needles?

We knit children's hats for newborns, small child(from one to 5 years) and a large child (school age).

Hat for newborns

If a mother or grandmother knows how to knit, even before the birth of the child they prepare a dowry - knitted baby clothes, including hats.

For kids we choose high-quality and delicate yarn:

• baby alpaca
• microfiber
• bamboo
• cotton
• merino wool
• viscose

A knitted hat for a baby is joyful and practical. Everything that surrounds a child should be cheerful, bright, make him happy, and make him smile.

Knitted hat for a boy: diagram

A DIY hat for your baby is an interesting and useful idea. It is better for the child to choose the style of the model; he will be happy to wear it. You can embroider your favorite cartoon character, the emblem of a famous sports club, a car, or your favorite animal on a hat - this will make it fun and funny.

Hat for a child from 3 months to a year

You can complete your baby's wardrobe with a cute hat with attached ears and an embroidered cat's face.

To work you need to take:

• knitting needles No. 3.5 with fishing line
• acrylic yarn with the addition of gray wool
• small skein of black yarn
• needle with a large eye

Description of work:

1. The set of loops must correspond to the age of the baby from 42 to 47 loops
2. We knit in a circle with stockinette stitch 16-18 cm (much depends on the thickness of the yarn)
3. Close the loops and sew
4. We sew each corner obliquely with black or contrasting threads, as a result we get ears
5. We embroider the muzzle with black thread according to the proposed pattern.
6. We crochet a chain or weave a braid from threads folded in several rows and sew

Embroidery pattern

It is better for an inexperienced knitter to choose a hat for a boy that is not difficult to make. Despite the simplicity of knitting, such models look cute, and most importantly, they will keep the baby warm and comfortable, an excellent option for cold and inclement weather

To ensure that the hat fits tightly to the child’s head, covers the ears and does not fly off the head, we tie the ears to it.

How to knit ears for a hat:

1. We knit the ears separately, sew or crochet them to the finished product
2. Already tied ears carefully knit, as you cast on the stitches of the initial row
3. Having collected loops from the headband of the hat, we begin to knit ears of different lengths, shapes and patterns

We decorate the product with a pompom, tie airy crocheted chains or long braids from yarn folded into several threads.

How to knit a hat-helmet for a boy?

Warm helmet An excellent option for frosty and inclement weather, because it performs a double function: it covers the baby’s head and protects the neck. The entire hat is knitted with one pattern - English elastic.

Knitted hat for girls

The most grateful connoisseurs of knitters’ creativity are children. They rejoice from the bottom of their hearts beautiful things bound by the caring hands of loved ones.

How to knit a hat for a girl? Craftsmen have created many styles of beautiful and warm hats for girls.

Decorate the hats:

• original openwork patterns
• appliqués
• pompoms
• embroidery

The threads used are multi-colored and bright. It’s good if the decision in choosing a style and color is made by a little fashionista, because she is the one who wears the headdress.

A charming hat for a girl from 2 to 5 years old, easy to knit, use a flower as decoration crocheted. This headdress is recommended for ages 3 to 5 years.

Material for work

• thick yarn 100% acrylic
• circular knitting needles with fishing line 5#

Progress

• We knit 4 cm with an elastic band (2x2), cast on the number of loops based on the control sample
• The next 3 rows are knit stitch and 3 rows are purl stitch.
• Repeat the pattern until the length of the hat from the start of work is 17 cm
• We make a gradual decrease in every second row, knit two loops together
• Sew on a flower, bow or other decoration, it all depends on your imagination

Beautiful and warm knitted products knitted by hand will always be fashionable and popular, because they keep the warmth of caring hands.

Video: Knitting baby hats