01.10.202127.05.2017

Before caring for the carpet, master meditation and stock up on sedatives.

This article will talk about how to care for carpet. And I would like to note right away that maintaining this most capricious floor covering in perfect condition will require significant effort and extraordinary restraint from you, especially if it concerns a model with long pile. So don’t immediately throw the advice about meditation and sedatives aside.

General provisions

All of us, undoubtedly, can immediately, without much thinking, list the main advantages of woven carpet, which is most similar to classic carpets and is most often used in residential premises.

This:

High thermal insulation. This type of flooring simply radiates heat and pleasantly warms bare feet if you walk on it barefoot. It even acts as some less expensive alternative to the underfloor heating system, although, of course, unlike it, it cannot serve as a replacement for the radiator heating system. The thermal conductivity coefficient, depending on the base material and pile, can be 0.1 W/(m×K) and lower;

Pleasant tactile sensations. Touching the pile is distinguished not only by warmth, but also by softness and pliability, thanks to which you just want to bury yourself in it;

Beautiful appearance. The mass of existing colors and patterns can allow you to choose not just a model that matches the interior, but a real work of art that will become the “highlight” of your home.

It is for these qualities that people value this type of flooring so highly. In fact, you can even narrow them down to the root cause - lint. It is this element that helps retain heat, springs pleasantly underfoot and takes on interesting color solutions to our eyes.

But it also contains a list of problems that arise in the process of care:

Between the villi:

A colossal amount of dust accumulates, which becomes a threat to the human respiratory system;
Fragments of dirt brought from the street get stuck, which is not only unhygienic, but also very ugly;

The trapped moisture is retained, which becomes a source of mold and unpleasant odors. This applies not only to water, any spilled liquids create difficult stains;

In addition, the pile itself tends to stick together and become deformed during use, which has a very negative impact on both the general appearance of the carpet and its technical characteristics;
Reproduction of microbes and other pathogens. In general, this problem comes out of the first point, but it’s worth mentioning it separately. Moisture, dust and protection from sunlight penetrating through the window thanks to the shade of the same fibers are an ideal habitat for living creatures that you don’t even want to think about.

Thus, of course, you can choose an inexpensive needle-punched model that practically does not get dirty, but, unfortunately, it cannot boast of softness, warmth and beauty. Or you can purchase a woven or tufted fabric with all the described advantages, but then you will also need to care for it accordingly.

A few words about installation and the first steps of using carpet

You should think about carpet care from the moment it is laid. The instructions assume the use of one of four possible methods:

Name	Description	Distinctive Features
"Free"	One whole cloth fills the entire floor surface, after which its edges are trimmed and fixed with baseboards.	No additional costs for fastening materials and ease of implementation yourself. But this option is suitable only for small rooms and excludes the possibility of using furniture on wheels.
"On double-sided tape"	First, strips of double-sided tape are glued to the floor. Then the protective film is removed from them, and a roll of carpet is rolled out on top. Before smoothing the coating, you need to make sure that it lies exactly as it should.	The low price and high speed of implementation are overshadowed by the possibility of wrinkles, especially if the room is a walk-through room.
"Glue"	A thin layer of special glue is applied to the rough base with a notched trowel. Next is the laying of the canvases themselves. If the question arises of how to level out a wrinkled coating, then you should use metal rollers to solve it.	High reliability and the ability to cover large areas. But you will have to work, since the process is quite labor-intensive, and you will have to fork out for a high-quality adhesive solution.
"Stretching"	Along the perimeter of the room there are special boards with nails pointed upward at a certain angle. Then the carpet is stretched over them using special tools.	The most reliable and beautiful option, completely eliminating the appearance of any folds, but very difficult to implement.

Subtleties of correct docking

If you use several canvases, you will need to join them well. This point plays a very important role in the further care of the material in question, since if there is a gap, water will penetrate into it while washing the floors, which will ultimately cause rotting processes on the underside of the carpet.

So, how to connect carpet together correctly?

Now I will describe to you all the intricacies of this operation:

In the process of laying the canvases, we place one on top of the other with a spacing of a few centimeters;
Then, approximately in the middle of the overlap, we apply an even elastic strip and along it we make a cut with a sharp knife through both layers of the floor covering at once;
We remove the excess pieces and glue the edges of the carpet that fit perfectly together.

If a gap still forms at the joint, which can happen, for example, due to a dull knife and very thick sheets, then do not despair, but simply pull out the pile from the remnants of the carpet and place it on the glue directly in the gap.
This place, of course, will be tougher than the rest of the coating, but it will not stand out externally.

Eliminating the smell of a new product

Another problem that you will have at the initial stage of operation: how to get rid of the smell of new carpet? This is especially true for synthetic products, although natural ones also have a very persistent and specific aroma. The manufacturer, as a rule, promises its disappearance within a week, but very often this period stretches for almost a month.

Eliminate odor as follows:

We open all the windows and doors in the room, turn on the fan or air conditioner, thereby creating the maximum possible draft;
Sprinkle the carpet with baking soda, which has a useful property for our case - absorbing odors;
After a day, carefully vacuum the coating to remove all soda crystals from it.

Preventive measures

To reduce the amount of dirt that gets into the pile, it is enough to lay special foot mats at the entrance to your apartment or house. This simple precaution will make caring for the main floor covering much easier.

Regular procedures

Now let’s move on to the operations that will need to be performed during the entire period of operation of the carpet:

Vacuuming

Don't waste your energy sweeping the flooring in question.
A broom and dustpan will not be able to cope with the lint, and all your efforts will simply be in vain.

Ideally, you should vacuum the carpet at least three times per week. But, firstly, with the mass of current worries it is not so easy to find so much time for cleaning, and secondly, the degree of pollution in each house differs depending on the number of people living, the presence of children and pets, as well as personal character traits. Thus, be guided by the frequency of use of the vacuum cleaner individually for your situation.

It is also worth paying attention to the features of the material itself:

Natural carpet:

It is not advisable to use it, since the moisture that accumulates between the villi as a result is very difficult to completely remove in a domestic environment. This will lead to the appearance of unpleasant odors and the proliferation of various microorganisms;
It is advisable to use a special rotating brush as an attachment. During operation, it levels and unravels the pile, increasing the efficiency of collecting even deep-seated dirt and returning the canvas to its former brightness;

Synthetic carpet. Here, the use of a washing vacuum cleaner is allowed, but with the condition that the moisture will be thoroughly removed after cleaning. Otherwise, the water will soon wash away the dirt-repellent impregnation, which will generally call into question the rationality of further use of such a floor covering.

Cleaning with a steam generator

An excellent opportunity to keep the pile clean, as the steam has a high penetration level and temperature that kills most types of microorganisms. It is enough to walk the floor covering with such equipment once a month to restore its freshness.

When purchasing carpet, be sure to inquire about the possibility of using a steam generator to clean it, since this type of device is not suitable for every material.

Bactericidal quartz treatment

Of course, not everyone will spend 1000 rubles on purchasing special equipment that can effectively destroy all microbes that may live in the pile of your carpet. But such a procedure should be carried out at least once every six months. Think about it, ask your friends, maybe someone can give you a bactericidal irradiator for temporary use, which will be cheaper.

Washing

Very effective method, but its implementation is only possible if the canvas can be removed from the floor, that is, if it was not glued during installation.

The following actions are performed:

We remove the carpet from the floor, roll it up and soak it in a sufficiently large container with laundry soap, mustard or a representative of a suitable mild household chemicals;
Then we lay it on a pre-prepared film or hang it on a metal pipe and pour it over with a powerful stream of water;

Before drying the fabric, make sure that there are no traces of detergent left on it, as this can lead to streaks and stains.

We hang the material out to dry in the sun. It is clear that washing is best done in the summer.

We should also talk about how to dry the carpet in the car. The fact is that many people forget about this need, as a result of which traces of rust later appear on the body, and the smell of dampness in the cabin will not improve your mood either. Depending on the amount of accumulated water, the following options can be distinguished:

Emergency measures

From time to time, carpet needs to show itself special attention. Now I will describe the following cases to you:

Eliminating damp smell

A persistent smell of dampness is a manifestation of mold formed under the carpet, which happens when a significant amount of water penetrates under it.

In this case, you must proceed as follows:

We bend the damaged area of the canvas so that the fungus is visible;
We thoroughly dry the affected area, for which again you can use a hairdryer;
Then we treat it with a special mold-killing compound, which can be purchased at a specialty store. A three percent solution of hydrogen peroxide is also quite suitable;

We finish the procedure with dry cleaning and ultraviolet treatment.

Eliminating ammonia odor

If you have pets, then there is a high probability that they will really like the soft high pile as a toilet. I won’t tell you how to wean them off this, but I will teach you how to get rid of unpleasant odors that are the result of your pets’ hooliganism.

We do this:

Rub baking soda into the problem area;
After a few hours, soak the area in vinegar;

Then rinse thoroughly with water;
Let the area dry.

To return bright colors, use a solution of three tablespoons of ammonia per liter of water, which is applied with a regular brush.

Eliminating stains

It is necessary to eliminate traces of spilled liquid immediately with a napkin or sponge, otherwise they penetrate deep into the pile and begin to cause much more problems when trying to get rid of them. For complete elimination, we apply our own approach to each substance:

Character of the spot	Steps to remove it
Beer, liquor or wine	First, clean with a simple soap solution using a brush, then wipe with vinegar mixed with water in a ratio of one teaspoon per liter.
Tea coffee	Add a tablespoon of glycerin per liter of cold water and wipe the stained area with the resulting solution.
Fat	Cover it with sawdust, generously soaked in gasoline, for a while, then clean the surface.
Wax or paraffin	Freeze with a piece of ice, then remove the frozen substance
Street dirt	Let dry and vacuum

Elimination of mercury

Now let's figure out how to collect mercury from the carpet.

The entry of such a dangerous substance into the pile requires decisive and correct action:

We remove children and animals from the room, and open the windows wide to remove toxic fumes;
We put on rubber gloves on our hands and a gauze bandage on our face, although it is, of course, advisable to wear a respirator;

We collect mercury balls using a pipette, syringe, tape or wet newspaper;

Place the collected substance in a jar of water, which we then close tightly;

We call a special service that deals with the removal of this type of waste.

Elimination of plasticine

Thanks to children, plasticine or chewing gum can get into the pile.

There are two possible approaches to fixing the problem:

Take the canvas out into the cold or use ice from the refrigerator to freeze the sticky soft substance, after which it can be easily picked out with a knife;

Place a sheet of paper on the sealed area and run a hot iron over it. As a result, the melted plasticine will absorb the absorbent.

Conclusion

If all the carpet care procedures described above do not scare you, then you can safely install it in your home. It is possible that you will not even need sedatives and meditation courses if you monitor the condition of such capricious material correctly and in a timely manner.

The video in this article will provide additional information. If you have any questions after reading the material, please ask them in the comments.

June 2, 2016

If you want to express gratitude, add a clarification or objection, or ask the author something - add a comment or say thank you!

How to effectively clean carpet from urine smell at home - step by step instructions. Effective and safe ways carpet dry cleaning.

But besides this, cute pets often defecate not in their trays, but on upholstered furniture or carpeting. And in this case, in addition to unpleasant contaminants, an unpleasant ammonia smell appears. This is especially true for cat urine. Even a kitten’s urine can become a source of an unpleasant and persistent aroma, which only professionals can remove.

You can try to remove traces and smells of cat urine on carpet yourself. It is important to remember that the result will not always be 100%. In addition, cleaning the carpet from the smell of urine may simply be pointless when the stains are old, or several peees have been made in the same place. In this case, urine and urea penetrate deeply into the fibers, so an incorrectly selected product can further enhance the odor.

It is worth noting that many, trying to disguise bad smell, spray the stain with air freshener, special neutralizers and even perfume. Experts warn: you should never do this, because you can get new stains and increase the unpleasant odor.

How to clean carpet using improvised means?

Using a minimum of available products, you can clean the carpet from the smell of urine if you act immediately.

So, first of all, the stain needs to be blotted thoroughly. paper napkins or a clean towel, napkins (it is better to use rags or microfiber cloths that do not shed and absorb liquid well).

If the stain has already been absorbed, you can lightly wet it with water and blot it well. This is done in order to remove as much urea as possible. After this, the carpet is cleaned from the smell of urine using one of the following methods:

treat the contaminated area with 9% vinegar diluted 1:3 to water. Then let the surface dry by opening the windows for ventilation. It is important that the room is warm and dry;
dissolve 10-15 drops of iodine and a couple of grams of manganese in 20 liters of warm water. Treat the stain with the resulting mixture, then rinse it and leave to dry. This method is universal for dark carpets;
Light carpet can be washed with a mixture of lemon juice and water or ammonia. After treating the surface, the stain is also left until completely dry;
washing 72% laundry soap. You can lather the stain with it and leave it for 10 minutes. Then rinse and dry well.

If the house is damp, you can dry the stain with a hairdryer at low temperatures, while treating the stain with a dry towel.

In addition, there is another way to remove the smell of cat urine, even old ones. Since it is difficult to clean the carpet from the smell of urine, which has been absorbed deep into the fibers, it is worth proceeding in stages.

To do this, first apply a little vinegar and leave to dry. After drying, sprinkle it with soda, but not in a too thick layer. At this time, 100 ml of water and hydrogen peroxide are mixed in a container. A little detergent is added there to form foam. With this composition, the stain sprinkled with soda is carefully sprayed with a sprayer. This will allow the urine to decompose into its components, due to which, during the reaction, the odor will disappear. After everything has dried, you can thoroughly vacuum the entire carpet.

How else can you clean carpet from the smell of urine?

Regarding professional means remove stains and remove odors, manufacturers most often suggest using chlorine-containing preparations to neutralize unpleasant odors. It is chlorine that disinfects and copes well with various odors. However, such products are not always safe for carpet fibers and the environment. Before using them, you should definitely test the product for the possibility of changing color or bleaching the pattern on the surface.

To be as effective and safe as possible, you should contact specialists. Experienced Mister Glitter specialists will select the most suitable composition and get rid of the most complex odors and difficult to remove stains.

After purchase, carpeting can smell quite strongly. The question arises: how to remove the smell of new carpet? To protect products from damage, carpet manufacturers treat them with special chemical compounds. Also, adhesives and materials are used for production, which after laying the carpet can cause a specific odor. This is especially true for cheap carpeting. An unpleasant chemical odor may appear immediately after the carpet is laid and heated to room temperature.

The smell that lasts the longest comes from artificial bristles. If possible, try to buy carpet whose fibers consist of cotton, wool, etc. These materials will release the odor much faster than synthetic ones.

Use glue-free carpet installation methods if possible. This way you will avoid the appearance of excess odor.

How to get rid of the smell of new carpet

To get rid of this “aroma”, you can use several methods:

You can remove the smell of new carpet by airing it. Create a good draft in the room - open windows, doors, vents. The passing fresh air will carry away the unpleasant odor.
You can use two fans - arrange them in such a way that one brings fresh air into the room, and the other expels it.
Regular baking soda capable of absorbing various odors. Sprinkle it onto the surface of the new carpet in an even layer and leave for several hours, or better yet, overnight. After this, vacuum the surface. If necessary, the procedure can be repeated.
Another good odor absorber is white vinegar. It will help remove the smell from new carpet if the surface of the covering is treated with a mixture consisting of 1 part vinegar and 2 parts warm water. This mixture is poured into the steam cleaner. Further actions are in accordance with the instructions for the device.
Another helper for removing excess odors is onion. Cut a few onions in half and place a few at a time in bowls of water. Place the bowls at several points in the room, preferably throughout the night.
This method is similar to the previous one, but instead of onions we use an apple. This fruit will not only help remove the smell of new carpet, but will also make the air much fresher.
Manganese solution. Before using this product, test it on a small unwanted area of the carpet. Keep in mind that too strong a solution may stain the fibers.

We hope that our tips will help you get rid of the smell of new carpeting. How to remove other unpleasant odors that are absorbed into the carpet over time, read other articles in the “Care” section.

Carpet creates coziness in the house and gives warmth. When choosing it in a store, we are glad that it is easy to care for and only over time we encounter unexpected problems - the unpleasant smell of a brand new carpet, dirt that cannot be removed in any way. We have found ways to properly clean it at home and remove stains of various origins.

How is carpet different from a classic carpet?

Carpets are made by weaving longitudinal and transverse threads together on a loom. They are based on high-quality camel, goat or sheep wool. These floor coverings are also made from silk, cotton, and felt. Carpets are subject to dry cleaning only, since the coating may shrink after getting wet, and some types of carpet can be washed. It is most often made from synthetic materials, which significantly reduces the cost. There are several types of carpet.

Woven. It is made from natural materials on a jute basis, but in most cases this carpet is synthetic.
Adhesive based. It can have both natural and synthetic pile and differs significantly from real carpets. This flooring made by tufting. The base of the carpet is artificial jute, fixed with latex or simply latex. Carpet made in this way is less warm and durable, but it costs several times less.
Needle-punched. It has nothing in common with real carpets and even resembles felt in appearance. It is made from polypropylene or polyamide. This is a cheap and durable material that is used in cinemas and offices. It perfectly soundproofs the room, but unlike woven carpets, it will last only 5-6 years.

Why can't this coating be washed?

If only because it is simply inconvenient. Roll up a huge roll of carpet, after moving all the furniture and tearing off the baseboard... Perhaps this is not the most best option, at least for regular cleaning. Other reasons: the coating from water can come unglued and become unusable, and if it has a significant thickness, a felt backing or long pile, then it runs the risk of not drying out and starting to rot.

Carpets made from natural wool, jute and long pile should not be wet cleaned. The pile gradually accumulates moisture, which creates an ideal environment for mold, mildew and the appearance of persistent unpleasant odor. Wet cleaning can also cause significant damage to short-pile carpet with adhesive backing: moisture erodes the adhesive layer.

What materials are carpet made from?

Carpet is a backing on which the pile is attached. Very often, one or another method of cleaning carpet depends on what it is made of. The substrate is a combination of materials. It consists of a primary, secondary base and a securing layer between them.

Primary basis

It is designed to maintain the shape of the coating and secure the pile. The primary base is divided into woven and non-woven. It can be made from natural or artificial jute.

Natural jute is often susceptible to rotting, so carpet made from it cannot be washed. In addition, floor coverings based on it are very expensive.
Polypropylene is a cheaper material. The primary base made of it interacts well with moisture and is resistant to fungi and rotting.
Quite rarely, non-woven fabric is used as a base. It's cheap material. It shrinks easily and warps from moisture.

Fixing layer

To finally fix the pile in the carpet, one base is not enough. A fixing layer (primer) is required. Typically, latex or polyurethane is used in its production.

Secondary base

The part of the backing that hides the backing of the carpet and is in contact with the boards, bricks or concrete from which the floors are made is the secondary backing. It is made from different materials.

Jute. This is an environmentally friendly material that does not tolerate moisture. Not only does mold become its enemy due to washing, but also shrinkage of the material. If the backing is made of natural jute, then after wet cleaning the carpet will go in “waves”.
Polypropylene. It is not as capricious when washing as natural materials. But you shouldn’t do wet cleaning too often: once a month is enough.
Latex is also quite popular for bases. In combination with the pile and the primary base, it provides excellent sound insulation, does not lose shape and is not afraid of moisture. However, such a substrate is inconvenient, as it requires securing with baseboards.
Previously, many bases were made from natural felt. Like jute ones, they were afraid of water, were susceptible to the formation of fungi and mold, and an unpleasant odor. Nowadays, natural felt is practically not used in the manufacture of carpet; it has been replaced by a backing made of artificial felt. It is not subject to shrinkage and easily tolerates wet cleaning.
The thread base is subjected to dry cleaning with a vacuum cleaner or broom. In addition, carpet on such a backing will definitely not be covered with kinks or “waves”.

So, for carpet with pile and/or backing made from natural materials, only dry cleaning at home is possible. The covering with synthetic pile on a latex or polypropylene backing can withstand foam cleaning and washing, but it is better not to overuse wet cleaning. Carpet made of nylon should not be subjected to heat treatment, for example, cleaning with a steam cleaner, as the material may become deformed.

Foam cleaning is used for all types of carpet.

Methods for cleaning carpet from dirt and dust depend not only on the chemical composition of the coating. The important factor is not the thickness of the carpet, but the length of the pile:

carpet with long natural pile can only be dry cleaned at home or seek professional help;
the covering with short artificial pile easily tolerates moisture;
For carpet with thick, long synthetic pile, dry cleaning with absorbents should be used.

Photo gallery: determine from the underside of the carpet whether it can be washed

Carpets with a backing made of artificial felt can easily withstand dry and wet cleaning, but not washing. The base made of natural jute does not tolerate getting wet. Coverings with a backing made of synthetic jute can be washed. The latex base is not afraid of moisture and does not lose its shape from water.

Methods for cleaning carpet at home

Often, general cleaning becomes a real headache. Moreover, carpet is the main reason. Sometimes in just 1–2 months, from a light, pleasing coating to the eye, it turns into something dirty on the floor. In this case, it is rare that a housewife will not use household chemicals.

What cleaning products can be used to clean carpet?

Almost all household chemicals used for carpeting are applied in the form of foam. These are such well-known cleaners as Vanish and Cinderella, Amway carpet cleaner and others. You can also wipe off dirt with baking soda powder and vinegar diluted with water. But carpet made from natural jute, wool or felt cannot be cleaned this way. And not all artificial surfaces can be treated with special products.

The cleaners work effectively, penetrating deep between the fibers of the coating and removing dirt and dust. They are suitable for carpet with long and short artificial pile.

Dilute the selected product in warm water in a combination of 1:9 (or in other proportions specified in the instructions).
Beat until foamy.
Apply to the surface and spread evenly with a sponge.
Allow the foam to dry (do not walk on the carpet at this time) and vacuum it.

Cleaning products are great for deep cleaning of lint during general cleaning. They preserve the color of the material and perfectly clean light-colored carpet from dirt, dust, coffee and tea stains.

Citric acid will remove stains and lighten the pile of any carpet: pour the powder onto the dirt, after a few minutes remove it with a damp cloth, wiping with force, and then vacuum it.

Carpet cleaning products - table

How to remove stains dry

In total, there are 2 options for cleaning pile coverings: dry and wet cleaning. When water cannot be used on carpet, we use dry cleaning. As we remember, this applies to natural floor coverings. In this case, you can carry out periodic cleaning with a regular vacuum cleaner 2-3 times a week. This will prevent the proliferation of harmful microorganisms on the surface of the pile and will allow the carpet to remain pleasant longer. appearance. But we still carry out superficial cleaning with a vacuum cleaner. To properly remove all dirt, once a month you need to treat the coating with special dry products.

There are carpet cleaning powders such as Vanish, RM 760 Carpet and Upholstery Cleaner Powder, Dyson Zorb Cleaner and others. They can be purchased both in household chemical departments and in online stores.

Quartz coating of carpet in an apartment

To remove harmful microorganisms and prevent the appearance of fungi in the long pile of carpet, bactericidal quartz treatment is carried out once every 3 months. In children's bedrooms, this procedure can be carried out every 1.5–2 weeks. You can quartz the coating or the room itself for no longer than 15 minutes. The lamp ionizes the air and if the device is turned on, it can cause burns to the mucous membrane of the nose and mouth.

Wet cleaning of carpet at home

This method is considered traditional for carpet with an adhesive base and synthetic roll material. Most often it is used during general cleaning, using carpet shampoo, gel, liquid soap for carpets. Experts advise using only one cleaning product, as a mixture of chemicals can damage the carpet pile.

We remove furniture from carpeting.
Dilute the detergent in water according to the instructions. Typically this ratio is 1:9 or 1:10.
Whipping the foam.
Apply foam (not liquid) to the carpet. Leave for 2-3 minutes.
Apply another layer. The material absorbs moisture, dirt gradually dissolves.
Let the foam dry and vacuum the coating.

How to clean a coating using a steam cleaner

When cleaning carpets with steam, steam generators and steam cleaners are used (they are also called steam vacuum cleaners). Steam generators soften even old dirt and stains, but do not remove them from the pile of the coating. After exposing the pile to steam, you will have to walk over the surface with a brush and remove the dirt yourself. It's not that difficult, but quite time-consuming. Steam cleaners not only dissolve dirt fibers, but also suck them up like a vacuum cleaner. Of course, such a household appliance is more expensive, but it saves the housewife time and effort.

The steam cleaner must be powerful, otherwise the dirt will not be washed out. Some models can only operate on distilled water. The device perfectly removes stains from paint, antifreeze, tea and coffee. But it cannot be used to clean blood, egg and milk stains. These products contain protein, which changes its structure when exposed to temperature. It will be impossible to remove such a stain later.

A steam vacuum cleaner differs from a steam cleaner in its versatility. It removes dirt, disinfects, kills dust mites and destroys other allergens. The steam vacuum cleaner combines the functions of a steam cleaner and a powerful vacuum cleaner.

How to clean pile flooring with a steam vacuum cleaner - video

We clean only short pile with a washing vacuum cleaner.

Procedure:

The washing vacuum cleaner washes out the material, also dealing with stains from food products. To remove chemical stains, such as blue or green stains, you will first have to use a stain remover.

How to treat carpet with a vacuum cleaner - video

If the carpet can be removed from the floor, “grandmother’s” cleaning with snow will do.

If it's on the street frosty winter, and the snow is clean and fluffy, it’s quite possible to use it.

The method is suitable only for removable carpets; it removes dust and light dirt well, refreshes the material, but does not cope with food and chemical stains. It also cannot be applied to natural materials.

How to get rid of stains

Stains on the carpet inevitably poison our existence with their looking unkempt. They are often sources of specific odors, which are also not pleasant. To remove them, you can use stain removers, for example, Vanish, gel concentrates for various carpets ROST-EX. They are applied to the stain locally and blotted with a napkin until completely absorbed. After which cleaning is carried out with a regular vacuum cleaner. Stain removers do an excellent job of removing food and chemical stains: tomato paste, blue, brilliant green, antifreeze, watercolor and stamp paint, ink, blood. But besides household chemicals, there are other ways to combat pollution.

How to clean stains from stamp ink, brilliant green, grease and other contaminants - folk remedies

How to remove unpleasant odor from coating

Most often, you can get rid of an unpleasant odor by keeping the carpet in a well-ventilated area. This way you can bring out the specific aroma of the new coating. It appears due to chemical impregnation, designed to preserve the material from mold, fungi, electrification of pile and other unpleasant consequences of storage in warehouses and transportation. But if the carpet has been lying there for the second week, and there is practically no result, other methods are used.

Carpet can be quartzed. This will destroy harmful microorganisms and odor.
Soak with special bactericidal agents. For example, a solution of chlorine and water.
If the smell does not disappear, you need to take the carpet outside and dry it in the shade for 5-7 days.
To eliminate the smell of pet urine, carpet is treated with the following solution: 1 tbsp. l. peroxide per 1 liter of water.
Odors from fish and beer can easily disappear if you sprinkle salt on areas with an unpleasant aroma. A weak solution of vinegar will also quickly deal with the consequences of a beer party.

We hope that the methods given in the article will help not only rid the carpet of unpleasant odors and stubborn stains, but also maintain its beautiful appearance for many years.

Thanks to its fleecy structure, which, as a result, absorbs all liquids spilled on it, the carpet after a while begins to emit certain odors. Based on the type of amber, it is quite possible to determine its cause and take the necessary measures to eliminate it:

moldy damp shade, with a specific moldy smell. The carpet could get wet and not dry quickly enough, the humidity in the room is high and excess moisture is simply absorbed into the covering; after washing, drying was not carried out fully. In short, conditions have appeared for the development of such an unpleasant fungal infection- mold. What should I do? Carefully inspect the coating and find areas of mold damage, which (necessarily from the inside out!) must be cleaned and treated with mold removal agents. After drying, treat thoroughly with a quartz lamp or a product such as an ozonator (ozone in a special container). But, if mold has covered a significant part of the coating, then there are only two options - throw it away or (if you really care about it), then take it to a professional dry cleaner;
“pleasant” such ammonia notes appear for a reason - either the cats and dogs living with you have marked their territory, or infants have tried their best and produced a small puddle. This type of odor is incredibly difficult to get rid of; all that remains is removal. For this required places pour peroxide and blot with a rag (dry). If this does not help, then add soda and dishwashing detergent (liquid and with a sharp, pleasant aroma) to the peroxide.

You don’t have to bother, but go to a pet store and buy special products for such cases;

There is a strong smell of chemicals either on a product that was just brought from the store (this is how they are protected from damage), or washing products with a persistent odor were used. It happens that you spilled something chemical and then forgot about it, but the smell never went away. To eliminate it, make a weak (pink) manganese solution. They (and also a solution of vinegar and ammonia) treat the surface, but be careful - check in an inconspicuous area so as not to discolor.

There is also this option - rub in soda slurry (water and soda, liquid consistency), and then, when it dries, everything can be easily removed with a vacuum cleaner. A new carpet should be allowed to air out for a maximum of a few days; if the smell is still persistent, then such a product should not be purchased and it may need to be returned to the store;

residual smell of tobacco. It’s very unpleasant, especially for non-smokers, but for it to appear you don’t need to smoke in the room all the time - you just relaxed and allowed the guests to smoke once at the party, and the carpet “remembered” everything and “took revenge”, especially if the cleaning was not done on time . Now you need to thoroughly vacuum it, then wash it thoroughly with regular washing powder, dry with a fan heater.

In general, carpet care should be regular; if it gets wet, dry it immediately, use a vacuum cleaner (not a washing one!) to remove dust and use special household cleaning products for such cases.