Materials: yarn (100% merino wool, 50 g/125 i) - 100 g white, 40 g black.
Knitting needles No. 3.5.
Operating procedure
Cast on 140 loops on carbon yarn, close in a circle and knit with a 15 cm ornament. Next, start knitting the bottom according to pattern 1. Knit the bottom (lining) cap in the same way, but with stockinette stitch, except for the bottom.
To do this, divide the knitting into 7 parts (wedges), each with 7 faces. p., 13 p. p.. Next, do 2 vm. purl p. in each wedge in one circular row 3 times through the row, then in each row, once from the left edge of the purl stitch, the second time from the right edge of the purl stitch of the wedge, until 1 purl remains. p. and 7 persons. p. in each wedge.
Place 2 hats together and knit 3cm of total 1x1 ribbing, then knit 4 rows of hollow ribbing and sew off with a needle.
Size: head circumference 54 cm. Scarf length - 1 m.
Materials:
For the hat - 100 g of green yarn and 30 g of white yarn (100% merino wool, 125 m/50 g).
For a scarf - 100 g of green yarn and 70 g of white yarn (100% merino wool; 125 m/50 g).
Knitting needles No. 3.5.
Operating procedure
cap
First of all, knit the ears (they are knitted separately, 2 pieces). Cast on 9 loops on the knitting needles and knit in stockinette stitch, increasing on each side by 3 stitches, then by 2 stitches, and by 1 stitch. Then knit straight 7 cm (without increases). In the last row, add 2 stitches.
Tie the second ear in the same way.
Cast on the knitting needles 10 vp, then put on the loops of the 1st ear, cast on 42 vp, put on the loops of the 2nd eye, cast on 10 vp. Close the knitting round. There should be a total of 112 stitches on the knitting needles. Knit 14 cm with ornaments. Next, knit the bottom of the hat according to pattern 1.
Knit the bottom (lining) hat in the same way, but with stockinette stitch, except for the bottom. To do this, divide the knitting into 6 parts (wedges), each of which has 6 loops, 12 purls. Next, tie 2 m. purl p. in each wedge in one circular row 3 times through the row, then in each row once from the left edge of the purl stitch, a second time from the right edge of the purl stitch of the wedge until 1 purl remains. p. and 6 l.p. in each wedge.
Place 2 hats together and tie them with a roll.
Scarf
Cast on 32 stitches + 2 edge stitches (=34 stitches) and knit 50 cm according to patterns No. 3 and No. 4 with ornaments, then continue knitting, but place the ornaments in the reverse order for another 50 cm. Next, knit in stockinette stitch for 1 m. Fold the scarf in half. Sew the seams.
Model Tatyana Oleynik
Size: head circumference 56 cm. Scarf length - 1 m 40 cm.
Materials:
For a hat - 100 g of yarn gray and 40 g of white yarn (100% merino wool, 125 m / 50 g).
For a scarf - 150 g of gray yarn and 100 g of white yarn (100% merino, 50 g/125 m).
Knitting needles No. 3.5
Operating procedure
cap
Cast on 140 loops on carbon yarn, close it in a circle and knit with 15 cm ornaments. Next, start knitting the bottom according to the pattern. Knit the bottom (lining) hat in the same way, but in stockinette stitch, with the exception of the bottom. To do this, divide the knitting into 7 parts (wedges), each of which has 7 faces. p., 13 p. p.. Next, do 2 vm. purl p. in each wedge in one circular row 3 times through the row, then in each row, once from the left edge of the purl stitch, the second time from the right edge of the purl stitch of the wedge, until 1 purl remains. p. and 7 persons. p. in each wedge. Place 2 hats together and knit 3cm of common 1x1 ribbing, then knit 4 rows of hollow ribbing and needle off.
Scarf
Cast on carbon yarn 32 p. + 2 edge stitches (= 34 p.) and knit 70 cm with ornaments according to the pattern, then continue knitting, but place the ornaments in the reverse order for another 70 cm. Next, knit with stockinette stitch 1 m 40 cm. Fold the scarf in half . Sew the seams.
Hat and scarf with "Snowflakes" ornament
Size: head circumference 56 cm.
Materials: yarn - 250 g dark gray and 150 g white (100% wool).
Knitting needles No. 3.5; 3.
Operating procedure
cap
The hat is double, knitted in the round. Cast on 96 stitches on knitting needles using an Italian cast-on. Knit 4 rows of hollow elastic, then follow the pattern in a pattern.
From the 27th row, knit in stockinette stitch with dark gray yarn until the 40th row.
From the 40th to the 43rd row, knit according to the pattern.
Knit the bottom with white yarn. Make a hollow elastic band on all loops - 6 rows. Next, knit all the loops 2 together.
There are 48 loops on the needles. Knit 2 rows in stockinette stitch.
1st row - 1x1 elastic band.
Row 2 - hollow elastic band.
Row 1 - knit all stitches 2 together.
There are 24 loops on the needles. Knit 2 rows in stockinette stitch. Gather all the loops with a needle onto one thread and pull.
Let's return to the beginning of knitting. From 4 r. Using a hollow elastic band, take 96 stitches and knit in stockinette stitch in the round on needles No. 3 inner part hats - 52 rows. Next, make the bottom according to the description of the upper part.
Make a pompom and sew it to the top of the hat.
Scarf
Use the hat ornament and patterns according to scheme 2. Alternate the patterns in any order for the desired length of the scarf. It can be knitted both forward and backward, and in the round.
Attention!
If the scarf is knitted in the round, the pattern of each row is read from right to left.
If knitted in the forward and reverse directions, the pattern is read in odd rows - from right to left, and in even rows - from left to right.
A comfortable hat with long ears will protect your child in cold weather. Moreover, this year the fashion for the same models and jacquard pattern will never go out of fashion.
In order to knit a hat for a 4-5 year old girl
we need 100 gr. yarn dark color and 50 gr. light-colored yarn (Inca Alpaca Sport 85 35% alpaca, 15% wool, 50% acrylic 85 m, 50 g), circular knitting needles No. 3
Description of knitting - a children's hat with a jacquard pattern with knitting needles:
We start knitting from the ears.
We put 4 loops on the knitting needle, knit with stockinette stitch, in each 2nd row we add 1 loop on each side until there are 20 loops on the knitting needle. Next we knit another 10 rows straight. This way you can adjust the length of the ear yourself. Set aside the knitting and knit the 2nd eye in the same way. Now we knit 1 eye on circular knitting needles, then we cast on 28 loops for the front, we knit 20 loops for the second eye and we cast on 18 loops for the back of the head. We close the knitting in a circle.
Next, we continue to knit with a 1x1 elastic band (alternately knitting 1 knit stitch and 1 purl loop). The height of the elastic is 5.5 cm. We knit the next row facial loops and add 24 loops evenly. We knit 1 more row with a dark gray thread. Now let's move on to the jacquard.
This is the pattern I used to knit the jacquard 
The pattern report consists of 18 loops, we get 6 pattern reports. We knit the jacquard pattern once in height and in the next row we evenly decrease 24 loops and then continue to knit with stockinette stitch. At a hat height of 15 cm, without ears, we begin to make decreases. Divide all the loops into 6 parts and at the end of each part decrease 1 loop in each 2nd row. We tighten the last 6 loops with thread.
If you want a truly warm version of the hat, then you need to put it on a fabric lining or knit a second one
Descriptions of knitting hats:
For hats sizes 54-57:
you will need 30 -50g of multi-colored yarn the right colors and 50g of yarn of the main color for the elastic band and the base of the hat, you also need knitting needles No. 2 and 3.
Rubber: 1 knit, 1 purl or 2x2
Execution of work: cast on 100-130 stitches with the main thread and knit 2-4 cm with an elastic band, continue with stockinette stitch according to the selected pattern of colored jacquard. For the crown, decrease stitches in every second or third row, as shown in the diagrams. When finished, pull off the remaining loops and sew a seam. Make a pom-pom from yarn and attach it to the top of the head; you can also use a fur pom-pom or without it.
For those hats for which there is no description, you can take the descriptions of those below as a basis and knit the jacquard pattern that you like best.
Hat from DROPS
Warm, stylish knitted hat for women, made of medium-thick wool yarn. The hat is knitted in the round from the bottom edge. Used in knitting jacquard patterns, diagrams for which you will find in the description.
Dimensions
One size
Head circumference: 54/57 cm
Materials
Yarn DROPS KARISMA (100% wool, 50 g/100 m) 1 skein pink, 
black and gray colors, double and circular knitting needles 3.5 mm, circular knitting needles 3 mm
Knitting density
22 loops and 30 circles = 10x10 cm pattern on 3.5 mm needles
Description of knitted hats for women
Note: Pattern diagrams show all circles.
How to decrease: decrease 1 stitch on each side of the center. 3 loops in diagram A.5, shown in the diagram. Start with the first loop before pattern A.5, knit 2 stitches together. gray thread, 1 p. black thread, 1 p. gray, 1 p. black, remove 1 p. as knit., 1 knit. p. with a gray thread, pull the removed thread through the knitted one = decrease 2 sts.
On 3 mm needles, dial 104 and knit 1 round of knitting stitches, then perform 6 rounds with 1x1 rib (1 knitting stitch, 1 purl stitch), switch to needles 3.5 
mm and continue according to scheme A.4, after 1 vert. rapport height of the cap is 4.5 cm. Next knit the next. way: * 5 sts according to pattern A.5, 21 sts according to pattern A.6, repeat from * in a circle only 4 times. In the circles marked in diagram A.6, perform decreases (see description above), repeat the circle of decreases in every 2nd circle a total of 3 times and then in each circle 7 times. On the remaining 24 loops, knit 2 stitches together. to the end of the circle, cut the thread and pull its end through 12 sts on the knitting needle, tighten and fasten with purl. sides. Hat length 24 cm.
Kit from DROPS
Warm knitting set for women, knitted from medium-thick wool yarn. The set consists of a beret, the description of which is designed for two sizes, and a shirtfront. Both items are made in the same style and are knitted according to the jacquard patterns given in the description.
Dimensions
Beret: S/M - M/L
Head circumference: 54/56 - 56/58 cm
Dickey: one size
Circumference at the bottom edge is 93 cm, at the top - 53 cm. Height 30 cm
Materials
Yarn DROPS KARISMA (100% wool, 50 g/100 m) for the beret 1-2 skeins of light beige color, for the shirt front - 3 skeins; 1 skein of all colors indicated in the diagram for the beret and shirtfront; knitting needles and circular knitting needles 3 mm and 4 mm
Knitting density
21 stitches and 28 rows = 10x10 cm in stockinette stitch on 4 mm needles
Description of the knitted beret
On 3 mm knitting needles, cast on 104-112 stitches with a light beige thread and knit 3-4 cm with a 2x2 elastic band (2 knit stitches, 2 purl stitches) in the round, then perform 1 round of knit stitches. and in the next in the circle, continue knitting according to pattern A.1, repeating horizontally. rapport 13-14 times per lap. During knitting, the number of loops will increase to 156-168. In the rows marked with an arrow, it is necessary to reduce an even number of loops: A, B, C = 22-24 sts, D = 24-26 sts. There are 64-68 sts left on the knitting needles, continue knitting according to the pattern and then knit with a light thread gray color trace in this way: * 1 circle of knit stitches, then perform 1 more circle of knit stitches, evenly decreasing 64-68 sts, repeat from * 2 more times = 16-17 sts. In the next. knit 2 stitches in a circle together. on all loops, cut the thread and pull its end through the remaining loops, tighten and fasten with purl. sides. Beret height is 21-22 cm.
Description of knitted shirt front for women
On 3 mm knitting needles, using a light beige thread, cast on 290 stitches and perform 1 round of knit stitches, then continue with a 2x3 elastic band (2 knit stitches, 3 purl stitches). After 3 cm, decrease in every second section with purl. 1 p. each = 261 p., then repeat decreases at a height of 4 cm in other sections = 232 p. Continue knitting with a 2x2 elastic band and after 5 cm switch to 4 mm knitting needles. Perform 1 round of knit stitches, evenly decreasing 36 sts. In the next row. in the circle continue knitting according to pattern A.2, repeating horizontally. rapport 14 times per lap. After 1 vert. repeat according to the pattern on knitting needles 112 sts, perform the following. circle with a thread of light beige color knit, evenly adding 16 sts = 128 sts. Switch to 3 mm knitting needles and knit 5 cm with a 2x2 elastic band. Close the loops according to the drawing.
Mitts
Warm multi-colored mitts knitted, made of wool yarn of medium thickness. Knitting mitts is carried out in a circle according to the pattern given in the description. Description is for one size.
Dimensions
One size
Circumference: 20cm
Length: 24 cm
Materials
Yarn DROPS KARISMA (100% wool, 50 g/100 m) 1 skein of light beige color and all colors indicated in the pattern diagram, knitting needles 3 mm and 4 mm
Knitting density
21 stitches and 28 rounds = 10x10 cm in stockinette stitch on 4 mm needles
Description of mitts knitting
Note: The mitts are knitted in the round from top to bottom.
On 3 mm knitting needles, cast on 52 stitches with a light gray thread and knit in a 2.5 cm circle with a 2x2 rib (2 knit stitches, 2 purl stitches), switch to 4 mm knitting needles and perform 1 knit stitch circle, evenly decreasing 4 sts. Continue knitting according to pattern A.3, in the marked circle with 1 arrow evenly decrease 4 sts, with 2 arrows - another 4 sts = 40 sts. After the last one. circle according to the pattern, perform 1 circle with a light gray thread, evenly adding 4 stitches, switch to 3 mm knitting needles and knit 2.5 cm with an elastic band. Close the loops according to the drawing.
This jacquard also called lazy. It is convenient because the products are multi-colored, but do not require additional yarn consumption. To knit such a hat, you can use leftover yarn.
Knitting technique for a “false jacquard” hat
We put an even number of loops on the knitting needles around the circumference of the head, and knit a headband of the required height with an elastic band using white thread. We continue to knit the fabric of the hat with a false jacquard pattern.
Pattern repeat 4 rows, pattern repeat 2 loops. We knit 4 rows with each color. Edge loops are not included in the description of the pattern. When changing colors, we knit the first edge knit to secure the new color, and purl the last one.
Execution of the pattern.
1 rub. We introduce a green thread, knit an edge loop, then to the end of the row with rapport * remove 1 loop (thread behind the knitting needle), knit the next one * (f1).
2 r. We knit with rapport * we knit the first (green) purl, we remove the second (white), the thread is in front of the knitting needle (f2).
3 r. We knit with rapport *knit the first one, remove the next one, thread at work* (f3).
4 rub. We go in rapport *remove the first one (thread before work), purl the second one* (f4).
5 rub. Change the color to white, and move on to the first row of the pattern with white yarn (f5).
We finish the pattern (f6), and move on to knitting a new row of the pattern again with green thread (f7).
We knit the last few rows in stockinette stitch with white yarn to move on to the design of the crown. You can knit a hat around the head, making decreases at the top of the head; you can finish with a straight linen to get simple option with ears, you can simply tie the top of the head with thread. If desired, attach a pompom to the top of the head.
The hat is ready (f8).
How to knit a transformable ornament
Any hat becomes original and elegant if you add some decoration to it. Caps are usually decorated with flowers, crocheted. You can very simply knit the decoration with knitting needles, giving the product various shapes.
It fits like this:
We select the number of loops depending on your idea. On the sample, 90 loops were cast on with “Children’s” yarn. You can use different colors,
We knit several rows using stockinette stitch; 4 rows are knitted on the sample (f9).
The number of rows depends on the selected decoration size,
We transfer the open loops from the knitting needle to the thread with a needle or crochet, tighten it a little (f10),
We give the product the desired shape (f11, f 13),
We fasten the decoration with thread from the wrong side (f 12),
Sew it onto the cap (f14, 15, 16, 17).
