New Year's souvenirs Multicolored skates - the work of Yana Kalashnikova from Irkutsk. The diagram and description were found on the Internet. I wish you creative success, with best wishes
You will need: pink and white yarn; hook No. 3.75mm; 2 large paper clips; 4 small roses, filler.
- interesting selection for the site!!!
- 35 toy crocheted bunnies
Attach the thread to the 1 RLS clip as indicated in Figure 1 by the arrow. Tie another 9 sc along a paper clip; 1 VP, turn. Next we will knit in the round.
Row 1: sc for the front thread of the braid (only in this row), turn the work and knit with reverse side for the remaining free threads of the braid, sc (10 sc). Finish with 1 sl st in first sc in round row. There were 20 sc in total. Next we will knit braids using both threads. Rows 2-5: Work sc, ending with 1 sl st. (-20 sc)
Row 6: 1 ch, 1 sc in same sc as SS, 4 more sc, skip next 10 sts, 1 sc in each of last 5 sc. Finish SS.
Rows 7-10: Work sc. finish 1 SS. (= 10 sc). At the end of the 10th row, break the thread. Use pink thread to sew up the tongue of the skate. Hide the ends. Stuff with leftover yarn.
Cuff:
Attach white thread to the back seam of the skate. Row 1: 1 VN. 10 sc in circle 17, finish with SS.
Row 2: * VP 2, skip 1 p.. 1 SS in next. p.,* repeat until the end, finish with 1 SS at the bottom of the first 2 VPs. Break the thread. Hide the ends.
Using a needle and white thread, “lace” along the front of the skate. Tie the thread with a bow.
Suspension.
Attach the pink thread from the inside to the back seam of one skate under the cuff using a sl st. Knit 60 VP. do not break the thread. Attach the SS to the second skate (in the same place as the first). Break the thread and hide the ends.
Tie the pendant with a bow, leaving the skates hanging at different heights. Use glue to attach 2 roses to the front of each bow.
 |
 |
Translation compiled by julia_kh.
Elena (LISIONOK) sent her version of knitted skates.
 |
We all love to receive gifts. And, of course, giving too. After all, it’s always nice to give, albeit small, but still joy to someone dear to you. Even small souvenirs will make the recipient a little happier. And you can make such a small souvenir yourself with your own hands. This master class shows how to crochet small souvenir skates.
To crochet souvenir skates we will need:
- Floss in two colors;
- Hook;
- Clip;
- Sintepon.
How to crochet skates master class?
Choosing colors for future skates. And we start knitting from the bottom, that is, from the binding of the blade. The blade of such skates will be an ordinary paper clip.
We knit ten single crochets under the paper clip. That is, we place the hook under one side of the paper clip and grab the working thread. Let's knit it.
Now we need to unfold the paperclip and knit ten single crochets under the top of the loop. We start knitting from the very first loop from the hook.
And then we will knit eighty-seven single crochets in a circle. That is, in total our circular row consists of twenty columns, but after the last twentieth we do not start counting again, but, as it were, continue. And so we knit a total of eighty-seven.
Now we will make cuts. To do this, we knit four decreases. We have reductions in a row, one after another.
This is how we formed the toe of the skate. Now we knit another fifty-one single crochets in the round without decreasing. We count the columns in the same way as we counted the previous eighty-seven.
After this we need to change to a thread of a different color. IN in this case white. For elegance, you can add a metallic thread. Then the binding will shine.
We knit one row in the round.
Now we use the same white threads to do the lacing.
We attach a rope to the skate, by which it can be hung on a Christmas tree or used as a keychain. We also stuff the bottom of the skate tightly so that it does not wrinkle and keeps its shape.
This is what a souvenir looks like!
I found some wonderful ones New Year's toys on the Christmas tree
Truth New Year already behind us but they charmed me so much I hope you like them too 
New Year's souvenirs Multi-colored skates - the work of Yana Kalashnikova from Irkutsk. The diagram and description were found on the Internet. I wish you creative success, with best wishes
You will need: pink and white yarn; hook No. 3.75mm; 2 large paper clips; 4 small roses, filler.
Attach the thread to the 1 RLS clip as indicated in Figure 1 by the arrow. Tie another 9 sc along a paper clip; 1 VP, turn. Next we will knit in the round.
Row 1: knit sc on the front thread of the braid (only in this row), turn the work and knit on the back side behind the remaining free threads of the braid (10 sc). Finish with 1 sl st in first sc in round row. There were 20 sc in total. Next we will knit braids using both threads. Rows 2-5: Work sc, ending with 1 sl st. (-20 sc)
Row 6: 1 ch, 1 sc in same sc as SS, 4 more sc, skip next 10 sts, 1 sc in each of last 5 sc. Finish SS.
Rows 7-10: Work sc. finish 1 SS. (= 10 sc). At the end of the 10th row, break the thread. Use pink thread to sew up the tongue of the skate. Hide the ends. Stuff with leftover yarn.
Cuff:
Attach white thread to the back seam of the skate. Row 1: 1 VN. 10 sc in circle 17, finish with SS.
Row 2: * VP 2, skip 1 p.. 1 SS in next. p.,* repeat until the end, finish with 1 SS at the bottom of the first 2 VPs. Break the thread. Hide the ends.
Using a needle and white thread, “lace” along the front of the skate. Tie the thread with a bow.Suspension.
Attach the pink thread from the inside to the back seam of one skate under the cuff using a sl st. Knit 60 VP. do not break the thread. Attach the SS to the second skate (in the same place as the first). Break the thread and hide the ends.
Tie the pendant with a bow, leaving the skates hanging at different heights. Use glue to attach 2 roses to the front of each bow.
Translation compiled by julia_kh.
Source
http://kru4ok.ru/vyazanye-raznocvetnye-konki/
These skates are on a violin, crocheted- a great New Year's gift-keychain. They are tied with a paper clip and look like real skates - you just want to go for a ride and feel the speed on the ice.
If you want to decorate your home and give it to your friends original gifts, look at the topics:
To create skates we will need colored and white yarn, a 3.75 hook, 2 paper clips, and filler.
Descriptions of knitting. Skates (connect 2 parts).
1r. 10 SC for the front thread of the braid, turn the work 10 SC for the free threads of the zero row, 1 SS in the first SC of the row. Total 20 RLS.
2-5r. We knit RLS, finishing with 1 SS (20 RLS).
7-10r. We knit a sc, ending with a sl st (=10 sc). At the end of the 10th row, we break the thread, sew up the tongue of the skate, hide the ends, and stuff the skate.
We attach a white thread to the back seam,
1r. 1 VP, 10 sc in circle, SS.
2 rub. * 2 VP, skip 1 st, 1 SS in next st, * repeat to the end. finish with 1 sl st down first 2 ch. We break the thread and hide the ends.
Using a needle and white thread, we make lacing and tie a bow.
Suspension.
We attach the colored thread inside the skate to the back seam under the CC cuff. We knit 60 VP, attach the SS to the second skate, break the thread, hide the ends.
We tie the pendant with a bow, making the skates hang at different heights. Skates can be decorated with roses if desired.
Crocheted cat on skates - designer toy Tatiana Kornilova. We offer you a master class on knitting amigurumi toys and clothes for her.
VKontakte group: Knitted toys (crochet toys) by Tatiana Kornilova
Tatyana Kornilova at the Masters Fair: http://www.livemaster.ru/kornilovatoys
FORBIDDEN post the master class on other resources without the permission of the author
MATERIALS NEEDED for knitting a cat:
— yarn ALIZE COTTON GOLD (blue No. 40 or No. 350, milky No. 01, purple No. 616, green turquoise No. 610, a little light pink No. 371 for the ears);
— YarnArt JEANS yarn (hot pink No. 59, light yellow No. 004, a little red for the cheeks);
— light gray Iris yarn for skate blades;
- a little cotton white for ruffles;
- lace, sequins, beads, anything you like to decorate clothes;
— hook No. 2.00 mm, 1.00 mm;
- double needles 2.5 mm
- filler;
- black beads for eyes 5 mm or any others you have;
- screw spout or any other;
- a piece of white and red felt;
- a little glue;
- a small piece of thin wire for the tail (optional)
LEGEND:
RLS - single crochet
PREB - increase (two sc in one loop)
UB - decrease (two sc are knitted together)
Dc - double crochet
PSN - half double crochet
VP - air loop
СС - connecting post
Knitting pattern for amigurumi cat toy on skates
Legs+skates
We start with a bright pink thread (or whatever you have in mind), knitting boots:
1st row: we collect a chain of 10 vp. + 1 ch, 1 sc in the 3rd loop from the hook, 7 sc, 5 sc in the last loop of the chain. Then we continue on the other side of the chain: 8 sc, ss (21)
2nd row: 2 vpn, 1 hdc, PRIC from hdc, 6 hdc, 2 PRIC from hdc, 2 hdc, 2 PRIC from pn, 6 hdc, PRIC from hdc, 1 hdc, ss (28)
3rd row: 1 v.p.p, 10 sc, 2 PR from sc, 5 PR from hdc, 2 PR from sc, 10 sc, ss (38)
4th row: 38 sc for the back loop
5th row: 38 sc for the back loop
6th row: 38 sc
7th row: 10 sbn, (UB, 1 sbn) x6, 10 sbn (32)
8 row: 12 sbn, (UB, 1 sbn) x2, UB, 12 sbn (29)
9 row: 8 sbn, 6 dec, 9 sbn (23)
10 row: 8 sbn, 3 UB, 9 sbn (20)
11th row: 8 sbn, 2 UB, 8 sbn (18)
Row 12: 18 sc
We fill our shoes well.
!! Row 13: 18 sc behind the front walls of the loop (sides of the boots).
Change the thread color to milky!! Row 13: knit loops behind the back walls (4 sc, UB) x3 (15) Look at the photo.
We stuff the leg as we knit, but not tightly, softly.
Change the thread color to purple
15-16 row: 15 sc
Change to milk
17-18 row: 15 sc
Violet
Row 19-20: 15 sc
Lactic
21-22 row: 15 sc
Violet
23-24 row: 15 sc
Lactic
25-26 row: 15 sc
Violet
27-28 row: 15 sc
Lactic
Row 29-30: 15 sc
Violet
31-32 row: 15 sc
Lactic
Row 33-34: 15 sc
Violet
Row 35-36: 15 sc
Lactic
37-38 row: 15 sc
Violet
Row 39-40: 15 sc
Lactic
Row 41-42: 15 sc
Violet
Row 43-45: 15 sc
Then we continue with purple thread
Row 46: (4 sbn, RIB) x3 (18)
Row 47: 18 sc
48 row: (2 sbn, RIB) x6 (24)
When knitting the second leg, do not cut the thread!
Skate blade
Light gray Iris yarn, hook No. 1.0mm
We knit 2 parts 4 cm long: 8 sc in an amigurumi ring. And further in a circle.
At the end of knitting we make 4 KB and tighten the hole. As we knit, we fill it, but not tightly, so that our part can be bent during the sewing process.
We knit 4 short pieces 0.5 cm long (this is about 3 rows): 8 sc in KA.
At the end we do not tighten the hole, we only fasten the thread, leaving a long end for sewing. Stuff the detail.
We sew the parts together, and then sew them to the leg, as in the photo.
We make imitation laces on the shoes.
Connecting legs + torso
Note:
After we connect the legs, a slight deformation will be noticeable, i.e. one leg will be slightly larger than the other. But when stuffing, this difference will go away. But if this still confuses you greatly, then you can swap rows 47 and 48 on the legs, i.e.: row 47: (2 sc, RIB)x6 (24), row 48: for the first leg 24 sc, for the second 10 sc, i.e. We don’t knit this row to the end, but only to the middle inside legs. This can only be done on the second leg, on appearance This will not affect anything, but will straighten out the legs.
We continue to knit with purple thread.
On the second leg, knit 10 sc to the middle of the inner side and make 3 ch, find the middle on the other leg and connect them together. Please note that my seam runs at the back of the body, i.e. I connect my legs with my heels towards me. We continue knitting in the round:
Row 49: 24 sc along the leg + 3 sc along the chain + 24 sc along the leg + 3 sc along the chain (54). We put a marker.
50-55 row (6 rows): 54 sc
Change the thread color to green turquoise
Row 56: 54 sc
Row 57: 54 sc for the back loop
Change the thread color to light yellow (blouse)
Row 58: 54 sc
Row 59: 54 sc for the back loop
60-67 row (8 rows): 54 sc
We stuff the lower part of the body. In the zone, so to speak, we don’t stuff the thighs too much, because after the 45th row we sew the legs with stitches so that the toy can sit.
Row 68: (7 sc, UB) x6 (48)
Row 69-70: 48 sc
71 row: (6 sc, UB) x6 (42)
Row 72-73: 42 sc
74 row: (5 sc, UB) x6 (36)
Row 75-76: 36 sc
Row 77: (4 sc, UB) x6 (30)
Change the thread color to blue
Row 78: 30 sc behind the back walls of the loop
Row 78: behind the front walls of the loop, using the same thread as the blouse (or any other), we knit a collar: 10 sc, skip 1 loop, next. knit 5 dc (in one loop), skip a loop again, 1 dc, 1 dc, skip a loop, 5 dc (in one loop), skip a loop, 1 dc and then continue 10 dc. To prevent the collar from sticking out, we sew it on.
Row 79: 30 sc
Row 80: (3 sc, UB) x6 (24)
81 row: 24 sbn
Stuff the part to the end, fasten the thread, cut it and leave a long end for sewing.
Head
We knit with blue thread. Fill as you knit.
1st row: 6 sc in amigurumi ring (6)
2nd row: 6 PRIC (12)
4th row: (2 sbn, RIB) x6 (24)
5 row: (3 sbn, RIB) x6 (30)
6th row: (4 sbn, RIB) x6 (36)
7th row: (5 sbn, RIB) x6 (42)
8-10 row: 42 sc
11th row: (6 sbn, RIB) x6 (48)
Row 12: 48 sc
13th row: (7 sc, RIB) x6 (54)
Row 14: (8 sbn, RIB) x6 (60)
15th row: (9 sc, RIB) x6 (66)
16-21 row (6 rows): 66 sc
Whoever has a screw spout, fasten it between the 16th and 17th rows.
22nd row: (9 sc, UB) x6 (60)
23rd row: (8 sc, UB) x6 (54)
24 row: (7 sc, UB) x6 (48)
25 row: (6 sc, UB) x6 (42)
26 row: (5 sc, UB) x6 (36)
27 row: (4 sc, UB) x6 (30)
28 row: (3 sc, UB) x6 (24)
Fasten the thread, cut it, leave a long end for sewing.
Sew the head to the body.
Ears
We knit 4 parts: 2 - blue, 2 - pink. No need to fill.
Cast on a chain of 10 vp. Next we will knit in turning rows.
1st row: in the 2nd loop from the hook 9 sc
2nd row: 8 sc
3rd row: 7 sc
4th row: 6 sc
Row 5: 5 sc
6th row: 4 sc
7th row: 3 sbn
Row 8: 2 sc
Row 9: 1 ss
We put the two parts together and tie both parts with a blue thread, making 3 sc in the corners. Sew the ears to the head.
Amigurumi cat face design
We fasten the nose (mine is between 16 and 17 rows) and tighten the mouth and eye (see photo).
We make the first puncture in the mouth area and remove the needle in the eye area, making small stitch and return the needle to the mouth area again (the thread moves inside). And we will repeat this 2-3 times. We do the same with with the other eye.
We sew on bead eyes, glue felt into the corners (I cut out halves of the moon from felt and glue them in a circle of beads). We embroider the eyelashes, mustache and mouth, and glue the tongue.
Knitting cheeks: 12 sc in amigurumi ring.
Paws
We start with blue thread. Stuff as you knit.
1st row: 6 sc in KA
2nd row: 6 PRIC (12)
3rd row: (1 sbn, RIB) x6 (18)
4-8 row (5 rows): 18 sc
Row 9: (1 sc, UB) x6 (12)
10-22 row (13 rows): 12 sc
Change the thread to light yellow
23-25 row: from 12 sbn
Row 26: 6 CT, tighten the hole, cut the thread, leaving a long end for sewing.
We sew the handles to the body (for me it’s around row 76)
Tail
Knit with blue thread
1st row: 8 sc in KA
2-5 row: 8 sc. Stuff the tip of the tail. We won’t stuff the tail any further.
Row 6: (1 sc, UB) x2, 2 sc (6) Knit to the desired length. I have a tail of 8.5 cm. I also inserted a thin wire into the tail, bending the ears at the ends so that the tail could bend.
Sew the tail under the skirt.
Knitting patterns for clothes for toys
Skirt
In row 57 we still have front loops. We attach the green turquoise thread and knit:
1st row: 54 sc
Row 2: ch 2, dc in each stitch, at the end of the ss row.
3-8 row (6 rows): 2 vp, knit dc without increasing to the end of the row, at the end of the ss. Don’t forget to do 2 chain stitches at the beginning of each row.
Fasten the thread, cut and hide.
If desired, you can sew lace to the hem of the skirt.
Blouse design
In row 59 we still have front loops. We attach a light yellow thread and knit:
1st row: 54 sc
We change the thread to white (I use 100% cotton yarn) and knit ruffles, knitting according to the collar principle:
2nd row: skip 1 loop, next. knit 5 dc (in one loop), skip a loop again, 1 dc, 1 dc, skip a loop, 5 dc (in one loop), skip a loop, 1 dc, 1 dc... and so on until the end of the row. I also did 1 ch before each shell, but this is not necessary.
Fasten the thread, cut and hide.
Outerwear (jacket, snood, beret)
Jacket or sweater
When knitting the jacket, I followed this video:
I warn you right away that the calculation of loops for this jacket is designed for a toy measuring 25-26 cm. If you have a larger toy, then you need to cast on more loops. I recommend knitting 2-3 rows and trying them on. Again, watch the video, everything is explained in detail there.
Hook No. 2.0 mm, yarn over with green turquoise thread 32 ch + 3 ch. We knit in turning rows.
1st row: 32 dc
2nd row: 2 vp, (8 dc, prib) x3, 3 dc, prib, 1 dc
3rd row: 2 vp, (7 dc, prib) x4, 2 dc, prib, 1 dc
4th row: 2 vp, (6 dc, prib) x5, 6 dc
5th row: 2 vp, 23 dc, prib, 22 dc
Don't forget to try on the jacket. Everyone's toy size is different. Therefore, if you think that the blouse is too small, then knit the yoke 1-2 rows more.
Further, according to the rules, before making the sleeves, we would need to make a small sprout on the back so that the jacket would come together, but I needed the opposite, so that the jacket would diverge. So I immediately started joining the sleeves. We distribute the loops as follows: 7 (shelf) + 8 (sleeve) + 17 (back) + 8 (sleeve) + 7 (shelf).
6th row: 2 vp, 7 dc, 5 vp, skip 8 loops, and in the 9th loop we knit the first dc of the back, 17 dc in total, then again 5 vp, skip 8 and in the 9th loop we knit the first DC of the front, 7 DC in total
Let's try the jacket on the toy again.
7th row: 2 vp, 7 dc, 5 dc along the sleeve chain, 17 dc, 5 dc along the sleeve chain, 7 dc
Row 8-9: knit in rotating rows to the desired length.
We knit the sleeves. From the wrong side, we attach the thread to the armhole of the sleeve, make 2 v.p.p., and knit in a circle 5 dc along the chain, in the side stitch PRIC from DC (see photo), 8 DC and again PRIC in the chain stitch, at the end of the sl st. And so on in a circle until the desired length. I have 6 rows.
We tie the bottom of the sweater and the front of the sc in purple. We decorate the jacket with sequins, buttons, and beads if desired.
Snood
We knit the scarf with a 2x2 elastic band.
We cast on 2.5 mm knitting needles 10 loops + 2 edge loops (12 loops in total)
Row 1: remove the first edge loop without knitting, then knit 1 knit, (2 purl, 2 knits) and so on until the end of the row, knit the last edge loop purl too.
Row 2: knit according to pattern 1, slip, k1, (p2, k2), alternate until the end of the row, knit the last one. purl
My snood width is 2.5 cm. The length is 30.5 cm, you can even make the length a little shorter, but again, try it on.
Beret
Using hook No. 1.0 mm, dial on
1st row: 6 sc in KA
2-3 row: 6 sc
Continue with crochet number 2.0mm
4th row: 6 PRIC (12)
5th row: (1 dc, inc) x6 (18)
6th row: 18 PREB from SSN (36)
Row 7: 36 Dc
8th row: (4 dc, ub) x6 (30)
9th row: (3 dc, ub) x6 (24)
10 row: 24 sbn
Fasten the thread, cut and hide.
That's it, we can dress up our cat!
