Knitting pattern:

Mittens “Cranberry” from Nosova Tatyana

Merino yarn 50% merino wool, 50% acrylic, 200m/100g, consumption less than 100g, knitting needles No. 2.5

Mittens knitted with Magic Mirror (designer Kristel Nyberg)

Transformable mittens using Vasama knitting needles

A fashionable model of women's mittens with a free description of knitting with beautiful patterns. But that’s not all, they can easily be transformed into mitten gloves to open your fingers and easily send SMS from a mobile phone, which is convenient for young people, and not only for young people.

Beautiful knitted mittens with a jacquard pattern

Designer: Adrian Bizilia

The mittens are knitted from the bottom up. First the outer part is knitted, then along inside The loops are lifted from the dur-cord and the lining is made.

Both mittens are the same, that is, there is no left and right, which means they can be worn longer.

Mittens knitted

For those who crochet, we suggest you go through, where you will find several models crochet mittens.

Knitting mittens video

How to knit mittens with owls

Double mittens knitted

Mittens are knitted for a 5 year old girl. The yarn used was Pekhorka Children's novelty, knitting needles No. 3.

The video should load here, please wait or refresh the page.

Knitted mittens with a pattern

The mittens are knitted from 100% merino yarn, 50 g/125 m, Italy, using stocking needles No. 3.5.

The video should load here, please wait or refresh the page.

Mittens have always been the most practical and comfortable for cold winters. Today there is a huge selection of mittens in stores for the whole family, but it is much more pleasant to wear things that were created with love with your own hands.

Having learned to knit, you can create entire sets: hat, scarf, mittens. They will harmonize beautifully with each other if they are made in the same style with the same pattern.

I propose to go directly to the discussion of the topic: “how to knit mittens with knitting needles - step-by-step instruction».

How to knit mittens with knitting needles (step by step for beginners)

1:8

In order to learn how to knit beautiful stylish mittens, you need to learn how to knit the simplest ones, on the basis of which you can create the most original models for the whole family.

Seamless mittens - master class with detailed description

The most interesting thing is that even the lazy can handle this model. They can be plain, but the author suggests adding a few red stripes for variety.

For work we will need wool thread (70 g), 5 double needles No. 3.

The product is knitted from top to bottom on five needles, as a result of which it will turn out without a seam. Calculation of the number of loops: 20 x 1,7 = 34 loops. Distribute 34 stitches onto 4 knitting needles. I suggest rounding up and casting on 36 loops, so we get 9 each.

1:4

To make the explanation easier, let's give each knitting needle a serial number.

Closing the circle, we knit four loops of the 1st knitting needle together with the end of the yarn remaining on the 4th knitting needle from the set of loops, so that the circle closes tightly around the edge.

2:4

We will knit the thumb on the 1st needle, for the left - on the 2nd.

To do this, knit the first loop on the 1st knitting needle with a thread of the main color.

All other loops, except the last one, are knitted with colored thread.

Then we return the loops connected with the colored thread to the 1st knitting needle and knit again with the main thread.

We get a colored touch. This will be the hole for the thumb in the future.

Then we proceed to decreasing the loops on the toe of the mitten.

On the 1st and 3rd knitting needles, at the beginning, we knit the first two loops together with the front one in the second way (at the back walls), having first turned over the 1st loop.

On the 2nd and 4th knitting needles we knit two loops together at the end of the knitting needle using the first method (behind the front walls). So we decrease the loops through the circle until each knitting needle has half the number of loops (in our case, when the number of loops on each knitting needle is odd, we decrease the smaller part through the circle - 4 loops), then we decrease the loops in each circle (5 loops). At the same time, on the 1st and 3rd knitting needles, in those rows where we do not decrease the loops, we also turn the first loops over and knit them in the first way. When there are 2 loops on each knitting needle, tighten the loops and secure them on the wrong side.

Now let's get started thumb tying.

To do this, carefully pull the colored thread out of the thumb hole. Then we insert two knitting needles into the vacated loops, we get 7 loops on the bottom knitting needle, and 6 on the top knitting needle.

We begin to knit the finger, distributing the loops on 4 knitting needles: on the first 4 loops, on the second 3 and pull one loop from the side edge of the hole, on the 3rd and 4th knitting needles there will also be 4 loops each (3+1 from the side edge of the hole) .

To make it more convenient, the end of the working thread can be lowered into the hole (on the wrong side of the product).

We continue to knit the finger in a circle until the middle of the nail, and then begin to decrease the loops in the same way as when knitting the toe of the mitten: on the 1st and 3rd knitting needles at the beginning, on the 2nd and 4th knitting needles at the end, but decreasing We do it in every row.

When there is 1 loop left on each knitting needle, we tighten the loops and fasten them on the wrong side.

Left mitten knitted similarly to the right one, but in a mirror image: we knit the hole for the finger on the 2nd knitting needle.

Step-by-step instructions for knitting mittens on two knitting needles

These long mittens can also be knitted on two knitting needles. You can knit two parts separately and then join the halves, but we will consider the option where you only have to make one invisible seam (this will be correct and visually more beautiful).

4:4

Needed: yarn, knitting needles, regular and knitting pins, measuring tape, hook, needle.

Let's start with the right part.

We measure the circumference of the wrist, the length of the palm and thumb. It is also necessary to measure the knitting density by knitting a little. We measure how many loops there are per 1 cm. My girth is 20 cm, there are 2 loops in 1 cm. You need 40p-4 = set of 36p + 2 edges.

We start from the bottom with a 2x2 elastic (knit 2, purl 2). It turned out to be approximately 10 cm (15 rows).

In the second row, add 4 stitches evenly.

The finger in the mitten is not on the side, but somewhat closer to the palm, so for the right mitten we knit as follows.

• A. - edge, 2p. We knit according to the drawing and remove it with a regular sewing pin.
• B. - For a finger, take 6-7 loops. Depending on completeness. We knit 7 loops according to the pattern, and remove all the remaining ones with a pin.
• V. - we only have 7 thumb loops left on the working knitting needle.

We knit in height with the main pattern, without edges!!!

We multiply the length of the finger by 2. My finger is 6 cm * 2 = 12 cm in height. 21 rows came out.

WE KNIT THE FIRST AND LAST ACCORDING TO THE DRAWING!!!

We return the loops from the large pin to the knitting needle.

I have 16 front rows. Trying it on and checking the size.

9:4

Divide all the loops by 2. Slip one part onto a pin.

Let's start cutting down.

We knit the purl row according to the pattern. I don't have 20 stitches on my knitting needle. I knit like this: edge, knit 1, knit 2 together, knit 12, knit 2 together, knit 1, purl 1.

Total 20 loops. We shorten this way in each front row until there are 6-8 loops left on the knitting needle. I have 7.

Close the loops and do the same procedure with the second half.

To finish correctly, simply knit two stitches together, transferring the knitted one to the main needle.

From these lessons we can conclude that knitting is not that difficult.

Knitting mittens requires basic knowledge and a little free time.

Knitted mittens with a pattern (diagrams and description)

Having learned to knit the simplest patterns, you can dilute them beautiful patterns, giving free rein to your imagination.

And now I suggest switching to more complex mittens with knitting needles (diagrams and descriptions will help you understand this difficult task).

How to knit beautiful mittens with braids for women

Mittens with braids, knitting patterns and descriptions for lovers of the classics.

The braid will be the main decoration. We chose simple braid, but if you are not afraid of difficulties, you can choose a more complex and original option.

Yarn - acrylic (can be made from angora), approximately 70 g; stocking needles No. 3.5.

Elastic pattern: K2, P2.

Knitting a braid pattern: 8 loops cross to the left (leave 4 loops on the auxiliary needle before work, knit 4 and knit loops from the auxiliary needle).

Cross 8 loops to the right (leave 4 loops on the auxiliary needle while working, knit 4 and knit loops from the auxiliary needle).

Cast on 48 stitches and distribute them onto stocking needles, resulting in 12 stitches on each needle. Knit with a 3.5 cm elastic pattern (if the elastic is not enough for you, knit more than cm).

Then, we start knitting the main pattern. For the convenience of knitting the “braid” pattern, I transfer the loops from the 1st and 2nd knitting needles to one knitting needle. Those. I have the loops distributed over 3 knitting needles (not 4 knitting needles), on the first knitting needle there are 24 loops of the main pattern, and on the 2nd and 3rd knitting needles from the palm side there are 12 loops each.

So, the first row after the elastic begins with a knitting needle with 24 loops, we begin to knit the main pattern.

1-6 row: K1, P2, K8, P2, K8, P2, K1, knit stitches on 2 knitting needles from the palm side.

7th row: K1, P2, 8 loops cross to the left, P2, 8 loops cross to the right, P2, K1, loops on 2 knitting needles from the palm side we knit. Repeat rows 1-7 throughout the entire work.

At a height of 10 cm from the beginning of knitting (you don’t have to have 10 cm, everyone’s hands and fingers are different), we form a hole for the thumb.

Let's start with the left mitten. On the knitting needle from the side of the palm (3rd knitting needle) we knit 4 knits, remove 6 sts on a pin, put 6 sts on the knitting needle (so that there are 12 left, as before), k2.

We knit the hole for the thumb of the right mitten symmetrically, i.e. on the second knitting needle from the palm side: knit 2, knit 6, slip onto a pin, and knit 6, knit 4 on the knitting needle.

Toe formation carried out after the little finger on the hand is closed.

For a rounded toe, knit two middle stitches together on each needle.

Decrease stitches in each row until only 1 stitch remains on the needles (4 in total). After this, tear off the thread of the ball and thread it into the needle. Use a needle to pick up all 4 stitches, pull them off and fasten them from the inside of the mitten.

After the two mittens are knitted, we begin knitting the thumb. To do this, remove 6 sts from a pin onto a knitting needle, cast on 6 sts on a parallel row and cast on 4 sts on two side rows. In total, we got 20 stitches, distribute them onto 4 knitting needles (5 stitches per knitting needle).

And we knit circular rows of faces. to the required finger length. We form the toe of the finger similarly to the formation of the toe of the mitten.

Knitting mittens for children

Children really love it when their mother creates, for example, beautiful foxes or bears with her own hands, which they can put on their hands and go play in the snow.

Knitted children's mittens with owls

There is nothing more interesting for a child than mittens with a pattern. He wears such things with great pleasure, so I propose to please the child with marvelous owls.

19:4

Materials and tools:

1 skein;
stocking needles No. 1.5;
additional knitting needle or special stitch remover;
yarn needle;
four beads;
thread and needle for sewing on beads.
The mittens are knitted in two threads.

So, we cast on 32 loops, distribute them onto 4 knitting needles (8 on each).
Rows 1 - 10: knit 1 rib. x 1 purl.
11th row: faces.
Row 12: knit; add 2 persons from the broaches. on every spoke
13 - 18 rows: faces.
Row 19: we begin to knit the “owl” on 12 loops of the third and fourth knitting needles. The first knitting needle is knitting; second knitting needle - faces; third needle - knit 4, purl 6; fourth needle - purl 6, knit 4.
Row 20: same as row 19.

21 row: first knitting needle - knit.; second knitting needle - k2, slip 6 stitches onto a pin for the thumb hole, cast on 6 additional stitches, k2; third needle - k4, p2, k4; fourth needle - k4, p2, k4.

22, 23 rows: first knitting needle - knitting needle; second knitting needle - faces; third needle - k4, p2, k4; fourth needle - k4, p2, k4.

Row 24: first knitting needle - knit; second knitting needle - faces; third knitting needle - knit 4, purl 2, remove 2 loops for extra. knitting needle at work, knit the next two knit stitches, then knit stitches. spoke - persons; fourth knitting needle - remove two loops for extra. knitting needle before work, knit the next two knits., then loops on extra. knitting needles, knit 2, knit 4.

25 - 31 rows: first knitting needle - knit, second knitting needle - knit, third knitting needle - knit 4, purl 2, knit 4; fourth needle - k4, p2, k4.
Row 32: same as row 24

33 - 35 rows: first knitting needle - knitting needle; second knitting needle - faces; third needle - k4, p2, k4; fourth needle - k4, p2, k4.

36th row: same as 24th and 32nd.

Row 37: first knitting needle - knit; second knitting needle - faces; third knitting needle - k4, p2, k2, p2; fourth needle - p2, k2, p2, k4.

38 - 41 rows: first knitting needle - knitting needle; second knitting needle - faces; third needle - knit 4, purl 6; fourth needle - purl 6, knit 4.

Row 39: we begin to decrease. First knitting needle - knit the first 2 stitches together. behind the back wall; second knitting needle - knit the last 2 knit stitches. behind the front wall; third needle - knit the first 2 stitches together. behind the back wall; fourth knitting needle - knit the last 2 knit stitches. behind the front wall. Knit the remaining loops according to the pattern (knit and purl)

When there are only 8 loops left on the knitting needles, tighten them with a needle. For the thumb, transfer the 6 loops removed on the pin to the knitting needle, and cast on 2+6+2 loops from the edges onto three knitting needles.

Video lessons from the best masters

YouTube today has become a real treasure trove where you can find a huge number of educational videos. For example, on Svetlana Bersanova’s blogs you can watch a video lesson for free. And there are quite a few such good authors. You can find a mentor to your liking and receive valuable knowledge absolutely free.

Original mice or white hedgehogs for kids

How to knit mitts

Warm openwork for girls (double mohair)

Part 1

Part 2

Interesting two-color minions for a boy 7-8 years old

Jacquard products (video tutorials)

Jacquard with a winter theme is a classic that will always be relevant, so I suggest moving on to the most complex options, which require maximum time and attention to detail.

Original knitting with ornaments (Norwegian patterns)

For girls with deer

If you want to learn how to knit a difficult, but very original pattern"deer", this lesson with detailed description will help you.

Men's mittens with arans for little men

If you learn all the lessons we offer, you will be able to fantasize and create products of any complexity: ladies gloves without fingers, with convertible, with false pattern, thick yarn and embroidery. Good luck in your endeavors. Try, experiment and pamper your family with pleasant fagots.

25:4 25:7

In cold winter weather, warm mittens will not only warm your hands, but will also add a stylish element to your look. Any knitter, even with minimal experience, can knit original mittens with knitting needles. The models presented in this article assume the ability to knit a basic model of mittens.

Mittens with a braid pattern

To work you will need:

• h/w yarn of medium thickness – 150g;
• set of knitting needles No. 4;
• pin.

Description

We cast on with knitting needles 52 sts. and go to circular knitting, distributing the loops into 4 sp. Having knitted 20 rows of elastic 2p.x2p., we make an increase of 2p. Then we continue according to the scheme.

We knit the finger starting from the 10th day. On the sides of the two central loops of the small braid we add: in every 2nd r. three times, in every 3rd r. three times, in every 4th r. three times. When on the sp. for the finger we get 18-20 stitches, transfer them to the pin. We dial over them another 2p. and continue knitting according to the pattern.

We knit the finger separately, using the description of the basic model of mittens for beginners, which is on our website.

We knit the main part of the mitten according to the pattern. At the end, carefully tighten the remaining loops and secure the thread on the wrong side.

Video master class

Mittens with a "Roosters" pattern

The model combines two types of patterns: geometric and animalistic. The rooster - the symbol of next year - knitted on mittens will definitely please you!

Dimensions: mitten length – 28.5 cm; width – 9cm; thumb length – 7.2 cm; width – 4cm.

To work you will need:

• h/w yarn Brown– 150g;
• h/w yarn of red, green, white colors - for the pattern;
• set of knitting needles No. 3.

Description

We start knitting with a set of 44p knitting needles. We switch to knitting in the round. We knit 7.5 cm of elastic band 1l.x1p. Let's move on to the front surface. We knit pattern No. 1 with knitting needles to the height of the thumb - this is approximately 7 cm. To knit the thumb, mark 9 stitches. and knit it with pattern No. 2 according to the description of the basic model for beginners presented on our website. In total, 20 stitches are needed for the thumb. We begin decreasing the toe of the mitten at 24 cm from the start of work. And we do it using the pattern diagram and description for beginners.

Stylish mittens with an interesting pattern for beginners: video master class

Mittens with embossed pattern

Dimensions: length – 26cm, circumference – 20.5cm.

To work you will need:

• h/w yarn – 120g (113g per 206m);
• set of socks No. 3.75;
• markers;
• marker thread.

"Bump" pattern

From 1p. knit 5 loops: 1l., 1n., 1l., 1n., 1l. Turn knitting, 5p. Turn the knitting again. Link 5 persons. Turn the knitting again. We knit 2p. in 1 p., 1 p., 2 p. in 1 purl. - we get only 3p. Turn the knitting again. Then we remove 1p., 2p. in 1 person, throw the removed st onto the knitted one. We have 1p left.

Description

We dial 40p. and switch to circular knitting. Place a marker at the junction. We will connect from the 1st to the 24th p. according to the scheme.

We repeat from the 17th to the 24th p. twice more. Then from the 17th to the 21st. one more time. We have 64p in our work.
We will tie the thumb from the 22nd day. We knit according to the pattern, using the diagram, until the last 13 stitches. 2nd sp., attach a marker thread, knit 12 sts with this thread. Then continue the row with the main color.

We continue to knit from 23rd to 51st. scheme.

Knit a mitten toe according to basic instructions for beginners.

Thumb knitting

Raise 24p. along the fabric and knit in the round:
1st: persons;
2p.: purl;
3p.: persons;
4p.: purl;
from the 5th row: elastic band 1 knit, x 1 purl.

Having knitted 4cm, we make decreases:
1p.: 2p. in 1l. – 12 times. We have 12 p.;
2p.: persons. for the lower lobule;
3p.: 2p. in 1l. - 6 times. We have 6p.

Break the thread, thread through the remaining loops, tighten, bring to the wrong side and fasten.

Simple mittens: video master class

Mittens “Kitten”

Dimensions: wrist size 19cm. The remaining sizes of the right mitten are shown in the photo. The left one is mirrored.

To work you will need:

• yarn of the main color - b/w or containing mohair - 80g;
• yarn black, dark gray, light gray, blue - 10g each;
• needle with a large eye;
• pins;
• set of sp. No. 2.5.

Knitting

We will knit the mittens using two knitting needles. Then we carefully sew the knitted halves together. This method is the most optimal for beginner knitters.

Left mitten

Top

Cast on with knitting needles 36 sts. and perform an elastic band 2k.x2p. You can knit “braids” instead of an elastic band:
1r., 3r., 5r.: * 4l., 2i.* - repeat from * to * - until the end of the r.
2p., 4p.: according to the drawing;
6r.: for 4l. loops we knit a “braid” - see photo.

Knit the cuff to the desired height. Usually it is 6-9cm, approximately 30 rows. Then we move on to the front surface. Having knitted 4 rows, from the 5th row we knit the kitten according to the pattern.

The dimensions of the drawing are 27p. wide, 43 rub. in height. Therefore, at first p. knit 7p. main color, 3 p. dark gray, then according to the drawing. You can knit a kitten’s scarf according to the pattern, or you can simplify your task by knitting it separately and sewing it on. We knit to the height of the little finger, i.e. about 14cm. Then we switch again to the “braid” pattern.

Let's start decreasing the loops. We do this one by one classical methods– knit a round or triangular toe. For the round one we knit 2 stitches. together in 1 p. For a triangular one, we knit 2 stitches symmetrically on both sides. together in the front rows. We tighten the remaining loops with thread and fasten.

Palm

We knit according to the description of the top. At a height of 6-7 cm from the beginning of the faces. satin stitch (this is about 17 rubles) we begin to knit the thumb. To do this, having knitted 26l, remove 8p. for a pin, 2l. In the next row, knitting purl. p. to the pin, dial 8p. Then we continue to work on describing the top (only without the pattern).

Thumb

Remove 8 stitches from the pin and place 2 stitches on each side of the hole. and take to work the 8p typed from above. We have 20p. Round on 3 sp. knit the height to the beginning of the nail. Then we make decreases: we decrease 1 point evenly four times. in every r. When 3 stitches remain, break the thread, tighten the loops, bring the thread to the wrong side and fasten.

Knit mittens with knitting needles to keep your hands warm even in the most severe frost!

Mittens are the most practical and convenient accessory for cold winters. Today you can buy mittens on the market different models, but it’s more pleasant to wear if you knit them yourself.

• If you learn how to knit clothes, then you can create entire sets for winter - a hat, scarf or snood and mittens. These things complement each other perfectly if they are created in the same style using the same pattern.
• To learn how to knit beautiful mittens, you must first create simple model mittens - with a simple pattern and without a seam.
• Based on the skill of knitting such accessories, you can knit any warm items of clothing for your husband and children.

Every woman should know how to knit mittens, just like woolen socks. Let's look at how to create simple women's mittens and men's knitting seamless.

Diagram and description:

Such a product can be plain, or you can add a thread of a different color to the elastic or stockinette stitch. The knitting pattern for such mittens is simple: 2x2 elastic on the wrist, the rest is stockinette stitch.

• For the knitting process, prepare wool yarn- 70 grams and 5 short needles No. 3.
• For a wrist girth of approximately 20 cm, you need to cast on 36 loops(9 loops on each knitting needle).
• Knit the right mitten first. Mentally, number the knitting needles for yourself: on the 1st and 2nd knitting needles there are loops of the lower part of the product (palm), on the 3rd and 4th knitting needles - the upper ones.
• First tie a 2x2 elastic band 7 cm high.
• Then knit in the round facial loops to the beginning of the thumb - 7 cm.

We continue the steps:

• Knit the thumb on the right part on the first needle, and for the left - on the second knitting needle. So, knit the first loop of the first knitting needle with regular stockinette stitch, and remove the remaining 8 stitches with a safety pin and fasten it.
• Then cast on 8 yarn over stitches on the same needle. and knit the last 9th stitch in stockinette stitch. The mitten had a hole for the thumb.
• Now knit to the nail of the little finger - 8 cm.
• Toe mittens knitted with decreasing stitches. On the 1st and 3rd needles, knit the first two loops together behind the back wall. Pre-turn the first loop. On other knitting needles, knit two loops together at the end behind the front wall.
• Knit like this until there are 2 loops left on each knitting needle.. Tighten the loops and fasten from the inside out.
• Thumb knitting- remove the pin and insert one knitting needle in place of this pin, and thread the second one on the opposite side. It turned out 7 loops on the bottom knitting needle and 6 loops on the top.
• Distribute stitches onto 4 needles: three will have 4 loops, and one will have 3 plus one loop pulled out from the side edge.
• Knit your finger in a circle to the beginning of the nail. Then start decreasing.
• Decrease on the toe is done as on the toe. When there is one loop left on each knitting needle, pull the loops and fasten from the wrong side.
• Knit the left mitten similarly to the right one, but in a mirror image.

If you have mastered the technique of knitting with stockinette stitch, then you should start knitting openwork patterns. Mittens using this pattern look original and stylish.

Knit such openwork mittens with knitting needles, it will turn out interesting, and your hands in such an accessory will be feminine and beautiful.

Pattern diagrams with descriptions:

• Cast on 44 stitches - 11 stitches on each needle. Tie a 2x2 elastic band.
• Knit the first row with knit stitches.
• On the next row, decrease 2 stitches together. Do this on each knitting needle.
• Two knitting needles - stockinette stitch. Start knitting the other two knitting needles: purl, the rest knit, the last one - purl.
• Again, knit stitches on two needles.
• One purl and 6 knits, yarn over, knit, yarn over, slip one loop, remove 2 loops to the left side. Pass the next loop through the loop you removed and pull through it. Next, knit to the end of the needle.
• Two knitting needles again in stockinette stitch.
• Purl stitch, knit 7 stitches, yo, knit, yo, knit, place the loop on the right needle and knit two stitches. Pull the loop that was crossed over through the next loop. Then knit to the end of the needle.
• Again 2 knitting needles.
• Purlwise, place 3 stitches on a free needle and leave to work. Knit three, then transfer stitches from the auxiliary needle and knit in stockinette stitch. Knit two stitches, yarn over, knit stitch, yarn over, knit 2, slip 1 stitch onto a working needle, decrease two stitches. Pull out the thrown loop, knit 2, purl.
• Two knitting needles in stockinette stitch.
• Wrong side, 9 knit stitches, yarn over, knit stitch, yarn over. 3 knits, 3 knits. Cross the loop and 2 together. Pull the loop through, wrong side out. Rapport is ready. Continue this way until the toe of the mitten.

Watch the video for details on knitting this pattern. The craftswoman made double mittens with a knitted lining.

Video: Knitting Double mittens - Openwork leaves with braids. Part 1

Video: Knitting Double mittens - Openwork leaves with braids. Part 2

Video: Knitting Double mittens - Openwork leaves with braids. Part 3

Video: Knitting Double mittens - Openwork leaves with braids. Part 4

Video: Knitting Double mittens - Openwork leaves with braids. Part 5

Video: Knitting Double mittens - Openwork leaves with braids. Part 6

Video: Knitting Double mittens - Openwork leaves with braids. End.

Here are a few more openwork patterns for knitting mittens:

You can knit mittens and a shawl with this pattern to create an interesting set.

An original pattern that is easy to knit. Leaves and cones will perfectly decorate your mittens.

Beautiful diamonds stacked on top of each other will look great on the top of the mitten.

Mittens for lovers are a stylish accessory that symbolizes the warmth of feelings and unity. In such mittens it is pleasant to feel the warmth of a loved one while walking together in severe frost.

Knit mittens for lovers with knitting needles with a white heart on a red background, or vice versa, with a red heart on a white background. In addition, you can make a common mitten so that when walking along the city streets, you can always hold hands and bask in each other’s warmth.

Diagram describing a common mitten:

• The photo shows that the elastic band of the mitten for each hand is knitted separately. Knit 7 cm with a 2x2 pattern - 2 pieces. Cast on 16 stitches on each needle. We will knit with two knitting needles.
• Now connect two elastic bands on circular knitting needles.

Let's continue:

• Knit in stockinette stitch in the round. There is no need for a hole for fingers on such mittens. Therefore, knit 7-8 cm before starting to create the heart.
• Knit the heart according to the pattern, first making 6 loops in the middle of the knitting on one side, with white thread, through 2 loops.
• In the next row there will already be 7 loops with a white thread through one red thread. Next, continue according to the pattern, first knitting the loops with white thread, then decreasing White color until one loop remains.
• Tie the toe of the mitten as described above and when 2 loops remain, tighten them and secure them on the wrong side.

Here are a few more photos of how you can knit mittens for lovers:

The pearl pattern is often used for knitting. Even a novice needlewoman can knit mittens with this pattern, as it is simple.

How to knit women's mittens with knitting needles with a pearl pattern? Scheme:

Description:

• 1st row alternates 1 front loop, 1 knit stitch.
• 2nd row - again alternate 1 purl and 1 knit, but knit a purl over the knit stitch of the previous row, and a knit stitch over the purl.
• Then repeat the 1st and 2nd row until the end of knitting.

Double mittens are convenient to wear in cold weather or when you want to play in the snow, especially for children. These mittens will not get wet quickly, and your hands will always be warm.

How to knit winter women's and men's double mittens with knitting needles? Some tips:

• If knitting is still difficult for you, then knit the inner and outer mittens separately.
• First knit the inner mitten. Then create the rib of the outer mitten and stockinette stitch to the base of the thumb. Pull the outer mitten over the inner one, straighten your finger so that it is on the outside and start tying it - it will be more convenient.
• To prevent the lower part of the mitten from slipping out, make a couple of stitches in several places of knitting and secure the parts.
• To knit the lower part of the mittens, use thin yarn, and for the upper part, use thick woolen thread. As a result, the mittens will turn out warm and beautiful.

Tip: You can link two mittens separately and then insert one into the other, connecting the bottom of the elastic using a regular needle and thread or crocheting the edges. You can also knit in one piece, and then insert one part into the other. A simple fold is formed exactly in the center of the knitted elastic band.

A classic of the genre - jacquard mittens for winter in Russia. The knitting is double and dense due to the interlacing of the threads different colors. The product will be warm, and your hands in such mittens will never freeze.

How to knit jacquard women's mittens? Scheme:

Beautiful and very stylish pattern. The diagram shows all the colors of the threads used.

These mittens are knitted from only two colors of yarn, but they look so interesting.

Jacquard pattern "Owl" - stylish and fashionable.

Jacquard pattern with deer. Only a true needlewoman can knit mittens with such an ornament.

Mittens with arans look luxurious. Products with this pattern are knitted for both adults and children. They turn out warm and beautiful.

How to knit women's long mittens with diamonds and arans using knitting needles? Scheme:

Important: Manizkas, snoods and hats turn out beautifully with this pattern. Therefore, you can knit a whole set - elegant and stylish.

You can knit warm down mittens from mohair. You can use any pattern. “Braids”, “Aranas” and others are suitable. Here are approximate patterns for knitting mohair mittens:

You just want to put on mittens with snowflakes and go for a walk in the cold, brushing snow off the branches of trees and bushes. Knitting such mittens is simple: cast on 44 loops, distribute on 4 knitting needles, knit a 2x2 (7 cm) elastic band and 7 cm in stockinette stitch. Next, leave a hole for the finger, as described above, and begin knitting the snowflake itself.

Below is a diagram and description of how to knit women's New Year's mittens with a snowflake. This pattern is also called “Norwegian”:

The elegance of the hand, the uniqueness of the image, the delicate style - all this is emphasized by the “Princess” mittens. An interesting pattern reminiscent of arans will make the products original and beautiful.

So, let's learn how to knit “Princess” mittens. Diagram and description:

Mittens of the “Princess” model can be knitted with different patterns. For example, the drawing “Owls”.

The pattern with plaits looks beautiful on the mittens. Here is his knitting pattern:

A deer, like a snowflake, is a symbol of winter and the New Year. Therefore, for knitting sweaters, socks and mittens, a pattern depicting this animal is used.

How to knit men's and women's mittens with deer with knitting needles? Schemes, description:

Here is another pattern for knitting a deer on mittens.

Tip: You can come up with your own deer, draw a diagram yourself and knit mittens using it. The result is a unique and original accessory.

The strands on knitted items are intertwined in a chic and unusual way. Mittens with such a pattern will definitely attract attention. This accessory will add individuality and originality to your look.

Mittens with strands are easy to knit with knitting needles. Below is a diagram according to which you can create the outer part of the mitten on two knitting needles. On the other two knitting needles, the inner part of the product is knitted in stockinette stitch.

It is better to see clearly how to knit such patterns. The video explains in detail how to create an interesting accessory - mittens with cords.

Video: Knitting mittens with strands Part 2 Basic pattern.

Transformable mittens are convenient because when necessary, you can open your fingers without removing the product itself from your hand. These gloves are comfortable to use mobile phone in the cold. It is also comfortable to work, for example, for trade workers if their activities take place on the street. When you need to accept and count money for a purchase, just remove the valve from the mitten and your fingers will be free.

Tip: Transformable mittens for men and women without fingers with a folding top are easy to knit. For a woman, you can take yarn in delicate shades: beige, white, pink, and for a man - blue, black, brown.

Diagram and description:

Knit these mittens using regular stockinette stitch. Elastic according to the pattern 1x1 or 2x2. Below is a knitting pattern for transformable mittens.

Description of work:

The Braided pattern looks unusual. If you knit mittens using “Braid”, you will get a stylish accessory. This pattern is easy to knit - repeat repeating from the 9th row.

How to knit braided mittens with knitting needles? Scheme:

Description of knitting for this pattern:

Stages of work:

• First, knit 7 cm of elastic, casting on 36 loops and distributing them onto 4 knitting needles.
• Then knit in regular stockinette stitch on two needles, and the Braided pattern on the other two needles.
• Leave a hole for the toe and knit until the beginning of the toe.
• Now start making 2 stitch decreases on each needle: on the first two knitting needles first, and on the other two at the end of knitting.
• When there is 1 loop left on each knitting needle, pull them off and fasten them from the inside out.

Norwegian patterns are winter, trees, deer and snowflakes. Even if you knit only a snowflake, it will already be considered a pattern in the Norwegian or Scandinavian style. On the mittens you can create deer, nature or snowflakes separately, or combine them in one pattern. There are no limits to imagination!

How to knit mittens “Norwegian patterns”? Diagram with description:

Important: When knitting such an ornament, it is important to be able to pull the thread, because you need to constantly change yarn from one color to another. Monitor the quality of the drawing so that the thread tension is uniform and the pattern does not lose its shape.

The pulling process is performed as follows: straighten the knitted loops on the right knitting needle, pull the thread along them, and hold the thread with the index finger of your right hand, pressing it against the last knitted loop. It is easier to press the thread on the wrong side thumb right hand.

Tip: On the right side, knit with knit stitches and pull the thread of the unused color so that it remains under the right needle. On the wrong side, knit with purl stitches and with your left hand, pull the other thread in front of the work and under the right needle. On the wrong side, the threads are pulled in front of the loops.

If you have learned how to thread a thread of a different color, then you can start knitting Norwegian patterns according to any of the schemes. One cell in the diagram is one loop of a certain color.

Video: Knitting (mittens with “Norwegian pattern”)

This type of knitting can be done without broaches, but the fabric will be thinner than with broaches. Watch the video on how to knit jacquard without broaches.

Video: The simplest way to knit jacquard without broaches

How to knit mittens “Braid with shadow”: description

Look how original these mittens look. Unusual, and few women knit this way. Make these mittens with your own hands and surprise your friends and family.

Pattern for knitting an Indian wedge for mittens:

• Knit the back side of the mitten as usual - with any pattern or just with knit stitches. On the palm: 1st row- Knit 15, from the 16th loop knit 2 on the front and back walls, knit 4.
• 2nd row- Knit 15, from the 16th loop knit 2 on the front and back walls, knit 5.
• Knit further 15 rows according to this pattern with adding loops to the palm in each row. As a result, there should be 15+20 loops on the first two needles.
• In the 16th row remove the finger loops onto the thread, close the knitting in a circle and continue knitting until the required length of the mitten.

Have you already knitted mittens? different patterns, but I want something unusual and original. Knit mittens from thick yarn. It will turn out very interesting, and the products will be warm and comfortable.

How to knit warm women's and men's mittens from thick yarn? To knit mittens from this yarn, cast on half as many stitches as to knit mittens from thin threads. But in order not to make a mistake with the number of loops, you need to make some calculations:

• Knit with a pattern of 10 cm thick yarn and calculate how many loops you have in 1 cm of knitting.
• Now you know how many stitches to cast on for one mitten - 18-20 or a little more.

Important: Knit mittens from thick yarn in simple patterns - knit or purl stitch, tangle stitch, and so on.

If you know how to not only knit, but also embroider, then you can create beautiful mittens. Knit mittens in one color and make back side beautiful embroidery.

Photo of mittens knitted with embroidery:

Knitted mittens with delicate embroidery: photo

Set - hat, snood and mittens knitted: photo of models

Knit a set for yourself, your child or your husband - a hat, snood and mittens. It will decorate any image, and things made by the hands of a loved one will warm you in severe frosts.

Set - hat, snood and mittens knitted - photo of models:

Beautiful products associated with the use of Arana and Braid patterns.

Set - hat, snood and mittens knitted in pink: photo of models

A dark set created using the Braid with Shadow pattern. It will look great with a coat or jacket in a contrasting color.

Set - hat, snood and mittens knitted with an interesting pattern: photos of models

And again green tint- the color of the New Year's tree. Aranas and braids decorate the hat, mittens and snood.

Green set - hat, snood and mittens knitted: photo of models

A gray set, but not at all boring, and even very stylish and interesting.

Gray set - hat, snood and mittens knitted: photo of models

And again the “Braids” pattern, but the set is already crocheted in beige. Classics always decorate and add originality to the image.

Set in beige color - hat, snood and mittens knitted: photo of models

Knit things with your own hands. Make your family and friends happy. If you link the kit, it can be a great gift, for example, for the New Year.

Video: KNOWN MITTENS. CHILDREN'S MITTENS FOR 2 YEARS OF AGE. HOW TO KNIT MITTENS OF ANY SIZE?