Craft a big snowman with your own hands. Do-it-yourself terry snowmen or how to make New Year's souvenirs for friends

Winter is associated with the New Year, fun and snow. If you're lucky with the weather, you can build a snowman with a friendly group. But don’t be upset, even if the winter turned out to be not very snowy. You can make a funny hero from scrap materials. Relax.by has prepared several options for you.

Crocheted snowman

Materials for creativity:

padding polyester or cotton wool;
white or red buckle;
hook 0.85;
needle;
two wooden beads.

Take a white buckle, cast on four chain stitches and create a circle. Make two stitches in each loop of the chain. Repeat the same in the second and third row. In the next row you need to make three columns and one air loop. Next, two stitches in the fourth loop of the chain; knit the entire row using the same principle.

You also need to knit the next row, but keep in mind that you need to knit two stitches every seventh loop. Next, knit every 10th loop in the same way, plus three chain loops in each new row. Knit two more stitches in further rows. You cannot add new loops in the chain after the 19th loop; knit two more rows in this way, and then decrease. You can increase the size of the toy by knitting additional rows without adding loops. At the end of the work, leave a small hole for padding polyester or cotton wool. Having stuffed the product with them, be sure to sew up the hole.

You will get one ball. Using the same pattern, create two more and sew all the balls together. To make it more convenient to sew on other parts of the snowman, tie a buckle around the wooden beads - these will be the snowman’s arms. Make the nose from an orange buckle, attach the eyes with glue.

Snowman made from socks

Materials for creativity:

white socks;
cotton wool;
markers;
scissors;
threads and needles;
pieces of colored fabric;
beads.

Making a snowman using this unusual method is very easy. Fill the sock with cotton wool and tighten it with thread. It should be a circle. Wrap white threads around several levels of the snowman, making equal parts.

The snowman will need a hat. Make it from colored fabric or socks. Stuff them with cotton wool and sew toys to the head.

Felt pens will help you make eyes, nose and mouth. By the way, it is better to make the eyes from beads, and embroider the mouth with red threads. Tie a small scarf around the snowman's neck.

Snowman made of corrugated paper

Materials for creativity:

colored polished cardboard in two colors;
3 hot air balloon;
newspapers;
scotch;
flour;
drape in two colors;
rope.

This snowman is unusual - he has a surprise. This New Year's craft will delight both children and adults. Few people will guess that there are sweets hidden inside the toy.

Inflate the balloons until required sizes and give them a spherical shape using tape.

Mix the paste. This is not difficult to do: bring the water to a boil, add flour to it and cook the mixture for several minutes over low heat. Cover the balls with pieces of newspaper. Apply several layers of newspaper to the surface of each ball. The more layers, the stronger the snowman.

Now glue the snowman and attach a string to its bottom. Secure it around the perimeter of the craft with tape or glue.

So, the base of the snowman is ready. You can start pasting corrugated paper in a circle, first bending it in half and making cuts in increments of 2-4 cm. For the craft, you can use corrugated paper in a reel, or you can use regular sheet paper cut into strips.

Give the snowman eyes, nose and mouth. The scarf and buttons can be made from drape or other fabric, and the face elements can be made from cardboard.

When the snowman is ready, carefully cut a hole on the top of his head and pour sweets inside.

like this New Year's craft can be used for playing outside or as gift wrapping from Santa Claus. A DIY snowman can decorate your outdoor patio.

Snowman made of balls and strings

Materials for creativity:

a skein of white thread (not thin);
balls (5 pieces);
PVA glue;
big needle.

Inflate balloons for the torso and arms.

Thread the thread through a needle and pierce the bottle of glue. Remove the thread from the needle. In the future, the entire thread will be saturated with glue. Coat each ball with sunflower oil and wrap it with thread in a chaotic manner.

It is advisable to wrap it in such a way that gaps are minimal. Then hang the resulting balls in a warm place for 20-24 hours to dry.

Pierce each ball with a needle and pull out the remains.

With the first snow, children begin to build snowmen. The crafts of this character are no less popular. It is made in kindergartens, schools, and is also used for decoration in New Year. By the way, for window decoration.

There are a huge number of options on how to make a snowman with your own hands. Almost any available materials are suitable for this. You will also need imagination. But you can use ready-made solutions.

I decided to make a selection of master classes on creating toys from various materials. Even children can make some crafts, while others will require the help of adults.

I tried to choose the most popular and common methods, so choose which one you like best.

Do-it-yourself snowman for the New Year using paper - a three-dimensional craft

Making a 3D toy is not at all difficult. Thanks to the templates, you can make interesting craft. We don't need anything else besides diagrams, scissors and glue.

The manufacturing process is quite simple. You just need , which I will provide, cut out and fold along the shaded lines.

So, first you need. Now carefully cut out the diagram.

After this, we bend the tenderloin along the lines marked with a dotted line.

Now we glue the edges and glue them together. And we get the head of a snowman, as shown in the photo below.

At the next stage. We assemble it in the same way. We glue both parts and fix the hat, which is in the template with the head. Also make your own small cone out of paper and color it orange. This will be the nose.

This craft can be put in another version. To do this, print and install the head on it.

like this a simple toy you can do it in a few minutes, the main thing is to carefully cut out the diagrams.

Craft a snowman from threads and glue

For making beautiful crafts By the New Year we will need a minimum of material and tools. This process may seem quite complicated. But even a child can make such a snowman.

To create a toy we will need balloons, PVA glue, a jar with a lid, a ball of thread and materials for decoration.

To begin, we pierce the needle through the nylon lid, fill the jar with glue and lower the ball of thread into it. Close the lid. This is necessary in order not to get dirty.

From the picture with the end result you can understand that we need to inflate four balloons. One is the largest, the second is a little smaller, and two small ones that will act as hands.

Now we wrap the threads around the prepared balls and leave them to dry for one day. After that, we pierce the balls with scissors or a needle, as a result of which they burst and can be easily removed.

Glue two large balls together. And we fix small balls on the sides.

All that remains is to decorate the toy. Show your imagination here. You can use the ready-made option, as shown in the main photo.

How to make a snowman for New Year from cotton wool

Making a New Year's craft from cotton wool is as easy as shelling pears. This is the most budget option of all possible, not counting the paper toy. Despite simple process, the snowman turns out to be quite cute.

First we need to prepare two balls of different sizes. To do this, we form a ball from several pieces of cotton wool and lightly press it on the sides.

Then we wet and soap our hands so that we can form a ball; if necessary, add cotton wool to make it even. When it dries, we grease it with PVA glue.

To make a nose for a snowman, wrap cotton wool around a toothpick, coat it with glue, and then paint it in a suitable color with a marker.

Make a hat out of fabric. You can just glue it together and tie it at the top. We make a scarf from a strip of fabric.

Now we need to assemble the craft. To do this, glue the balls together, fix the hat and scarf.

Using glue, we fix the nose, make eyes and buttons from beads. And we use ordinary twigs as hands.

That's it. A beautiful toy is ready for the holidays. As you can see, there is nothing complicated.

DIY big snowman made from plastic cups

If you want to please your children, then make a dimensional craft for them. Thanks to LED strips it will glow in the dark. Watch the master class in the following video:

This craft can easily replace a real snowman. It will be relevant in regions where there is little or no snow.

Master class on making a snowman from a sock

You can make a toy out of a sock in just 5 minutes. This does not require any sewing. The craft can be hung on the Christmas tree or simply used as a festive attribute indoors.

Take any sock and first cut it into two parts, removing the toe and heel.

We tighten the end of one part of the sock with a regular rubber band. Then turn the dough inside out and fill it with rice. After this, tighten the second end. Pressing with your fingers just above the middle, we divide the workpiece into two parts and tighten it with an elastic band.

Cut the second part of the sock in half. We tighten one piece with a rubber band at one end, turn it inside out, and the hat for the snowman is ready.

We cut out a ribbon from red fabric, tie a piece on top of the hat, and use the rest as a scarf. We make small cuts at the ends.

We glue beads in the places of the eyes and nose. You can put a bow on the hat. We also fix several small buttons on the bottom. If desired, sprinkle the craft with glitter.

Just a few minutes and the decorated toy is ready.

Snowman made from a light bulb for a school competition

If your light bulb burns out, it's okay. It can be used to make an excellent toy for decorating a Christmas tree. The child can take this craft to a competition in his class.

We will need watercolor paints. We paint the light bulb completely white.

Blue color indicates the scarf for the snowman. You can use any other color if you wish.

Now we need to draw the eyes with a mouth and hands.

The base is completely painted black. And draw on the nose.

If the craft will be used as Christmas decorations, then you need to glue a loop of rope on top.

Craft a snowman from cotton swabs

Another option for making a cute craft. The basis of the toy is foam plastic or modeling mass. You will also need some materials that you will learn about in the process.

We only need the top cotton swabs, leave about 1 centimeter of the plastic part. That is, we simply cut them off with scissors. We make 3 balls from polystyrene foam or modeling mass and string the tops of the sticks onto them in a circle.

Through wool thread we pass the wire and make mittens from fleece. We attach them to the second part of the craft.

When the third ball is completed, we attach a nose to it, which we make from orange paper.

We make a scarf and hat from fleece. Glue them to the craft. We also fix the eyes; for this you can use beads or buttons if you do not have a special element.

This is a painstaking task, so you will need strong nerves and free time.

Creative DIY snowman made of wire

If you want to do three-dimensional figure To put it in the yard, you will need some experience and special skills. But a simple snowman can be made using only wire cutters.

The stiffness of the wire does not matter. Its length will depend on the size of the craft you want to make. Using wire cutters, we begin to twist the segment into a spiral. The body should consist of 5 turns, no more will be required.

Let's fasten the spiral with a small piece of wire, otherwise it will simply unravel.

It should be noted that we do not cut off the remaining piece of wire, but wrap it in reverse side. We also fix the second circle and cut off the excess with wire cutters.

As a result of such actions, we should get something like this.

The last element is the hat. Let's form the required shape from the wire, secure it and cut off the excess ends.

At the next stage, we fasten all the parts, and our snowman is ready.

To enhance the craft, let’s paint it. Choose the color you like best.

Step-by-step making of a foam snowman toy for the New Year

From this simple material you can make beautiful toys, which children will really like. Approach this process creatively and use your imagination.

We will need two foam balls of the same or different sizes. In order for the craft to stand well on the surface, we cut off the base a little on both sides of the bottom ball, and on one side of the top one.

You can connect the balls using glue or toothpicks, as shown in the photo below.

So, the base of the snowman is ready. Now let's start with the design. First, let's make a hat. In our case, we use fleece 13-15 cm wide. To determine the length, simply wrap the material around your head.

Now we apply a strip of glue on one side and fix the material.

We cut out mittens from the material, glue them to the base, and tie a strip of fleece as a scarf.

Using beads and buttons, we make eyes for the snowman and buttons on the base. We attach them with glue.

Well, what would a snowman be without carrots? To do this, cut out a small triangle, coat it with glue and simply roll it up. We install it in place.

All that remains is to draw on the eyelashes and make the mouth.

This toy will look great under the Christmas tree with Santa Claus and Snow Maiden.

Master class on making a snowman with your own hands from fleece

If you have experience sewing and working with fleece, then you can easily make New Year's toy. Detailed instructions for making crafts, watch the following video:

Don't be afraid to experiment and create new ideas for the New Year. There is very little time left before the holiday, so set aside time for crafts.

How to make a snowman for kindergarten using pompoms with your own hands

Crafts for young children should be safe. This toy can be made from ordinary pompoms. The manufacturing process is simple, but it will take a little time.

We will need two pompoms of different sizes. To create a large pompom, cut out two circles from cardboard, cut a circle in the middle, and wind a thread around it.

At the next stage, we cut the wound threads along the edges. We separate the two rings a little from each other so that a thread can be threaded between them.

Now we pull the thread through the middle and tighten it tightly. Now we cut the cardboard circles and remove them. Our pompom is ready. If necessary, trim it with scissors.

Similarly, we make a slightly smaller pompom. Then we tie them together and decorate the craft. We make the eyes, buttons and nose from cardboard. You can use socks as a hat and scarf. In general, everything is in your hands, use your imagination.

DIY snowman for New Year made of foam rubber

The simplest toy can be made from thin foam rubber. It is suitable for decorating any surface or used as a New Year's toy.

Everything is very simple here. Cut out three identical circles and glue them together.

Now we glue the eyes, use the tape as a scarf, and cut out a hat from the fabric. You can experiment with decoration.

This way you can make a whole New Year's composition with other characters.

Master class on making a felt snowman for the New Year

To make a holiday toy with your own hands, you need to download a pattern; you can find many options on the Internet. Cut the felt along it and begin the process. See how this is done in the following video:

To do this you need to have some experience. A machine is not necessary as everything can be done by hand.

Original DIY papier-mâché snowman

Papier-mâché is a paper pulp with adhesives that can be used to make various crafts. In our case, we will make a New Year's snowman.

For the base we need foil. We tear off a small piece and form one ball, and then a second one with smaller dimensions.

And now we fasten them with hot glue.

The plastic mass is made from single-layer paper and PVA. Just gradually mix them until we achieve a homogeneous mass. Apply the resulting mixture to a foil base. To do this, use a spatula or knife.

Let it dry for about two days. After this, we begin to create a scarf. To do this, we use the mass as plasticine. We simply roll it into a sausage and form a scarf around the neck, which we first grease with PVA glue.

At the next stage, we make buttons and carrots from the mass. We also fix them with glue.

We make the base of the hat from foil. First the fields, and then a small barrel and glue them to the snowman’s head. Since the foil is quite thin, it will not be easy to apply the mass. Therefore, we simply dilute PVA glue with water and apply it to the hat. toilet paper and moisten it with a brush. Leave the craft for two days so that it dries thoroughly.

Now you need to decorate the toy. We paint the snowman white with acrylic paint. It is better to make the hat black. Paint the rest of the details in the color you like best. Leave for an hour for the paint to dry.

The next step is to artificially age the toy. To do this, dilute the brown paint to a liquid state, apply it to the toy with a brush and immediately wipe with a damp textile rag.

We draw the eyes and mouth with contour paint.

The vintage snowman is ready. You can put it under the Christmas tree or simply decorate the room.

Now you have a huge selection of ways to make a snowman for the New Year. All toys are easy to make with your own hands. So go for it. Happy New Year to you.

DIY snowmen for the New Year are very common as a decorative element. It’s not difficult to figure out how to make a snowman from paper, fabric, or thread, which is why they appear in apartments in various designs and forms. The cute winter character brings a special touch of coziness to the atmosphere. It reminds us of fun children's yard games and good cartoons.

How to make a paper snowman

Paper snowmen are easy to make. They fit into homemade garlands, are conveniently located on the branches of the New Year tree, but can also be stable to serve as a figurine or table decoration.

Figurine made of cylinders

Materials:

• a sheet of white paper;
• scraps of colored paper;
• marker;
• plasticine (optional);
• glue.

The paper should be cut into three strips. The length of the workpiece determines the height of the product, and the width determines the thickness of the snowman. Each next one should be a little shorter and narrower than the previous one. The strip is rolled into a cylinder and glued together. While the fastening dries, it is convenient to secure the joints with clothespins. The three cylinders are glued together in ascending order. It is worth making sure that the smaller parts are located in the center of the larger ones.

The finished form is decorated with plasticine buttons. The eyes and mouth are drawn on the smallest cylinder with a marker or cut out of paper. Carrot nose - a triangle made of orange paper is glued only with the base. The loose top gives a voluminous look to the face. Decorative elements can be molded from plasticine.

Models from flat figures

Snowman balls can be formed from paper strips. About 6 pieces 1-1.5 cm thick are rolled into rings, secured at the ends with glue and assembled into a single structure. In this way, 2 parts are made. The smaller one is decorated with eyes and a nose made of an orange cone. The junction of the two balls is decorated with a ribbon or strip of fabric to look like a scarf.

A ball of white circles of the same size can be decorated with a flat image of a snowman’s face and dressed up according to the example of the previous snowman. To assemble a ball from flat circles, you need to glue the semicircles of two parts together until the first is closed with the last.

Fluffy snowman

From corrugated paper and plasticine is used to assemble a cute fluffy model. To do this, you need to roll 2 balls of different sizes. It is better to use white plasticine; if there is a shortage, a workpiece of any color can only be coated with it. The base for large pieces can be rolled out of napkins and just wrapped in plasticine.

The paper is cut into squares with sides of 1.5-1.7 cm. A pen rod or any oblong narrow object is placed on the square. The corners of the part are connected and the workpiece folded in half is wrapped around the rod so that a tube is formed. The rod with the workpiece is stuck into the plasticine. The part is fixed in the ball, and a new one of the same type is rolled up on the rod. You need to continue this row by row from bottom to top until the entire snowman is covered with a fluffy layer.

Cone figurine

You need to cut an even circle from a sheet of paper. With a simple pencil On the wrong side, 2 perpendicular lines are drawn. One of the resulting 4 sectors should be cut out, and the edges of the cutout should be overlapped and glued. One side is decorated with applique or drawings of a face, hands and buttons. The headdress, scarf and nose are cut out of paper. A carrot can be perfectly replaced by a triangle of double-sided orange paper, folded in half and glued with the apex away from the part. The character looks original in a top hat, but you can simplify the design by simply putting a smaller cone of a different color on top. The cylinder is glued together from two strips of paper and one circle.

Snowman made from a sock

You can make a snowman from a sock with your own hands even without sewing skills. The result will be dense soft figurine in suit.

Materials:

Step by step instructions.

Making crafts from threads

Every home has white threads. Without special molds, you can use them to make balls for crafts.

For the first option You will need two balloons. They need to be inflated to the required size and given a spherical shape using tape. A needle with white thread is threaded through a tube of PVA. The needle is removed, and the thread is carefully wrapped around the ball, laying the turns crosswise so that there are no large bald spots left on the surface. The second one is treated similarly. All parts are glued together and decorated according to the principle of the previous ones.

For the second option make two pompoms. To do this, cut out two identical rings from cardboard. The thread is wound around the rings. The more yarn you use, the fluffier the pompom will be. After the entire surface of the ring is hidden under several layers of winding, the tip of the scissors is inserted between the cardboards and cutting of the threads begins. The template parts are moved apart slightly, and the threads in the center are firmly tied. For small pom poms, you can use a fork.

Ready-made eyes are attached to the smaller pompom for soft toys, or beads and orange pencil lead. The finished head is sewn to a larger pompom.

Snowman made from scrap materials

Almost anything unnecessary that can be found in the house that even remotely resembles a sphere is suitable for a snowman. You can easily turn a burnt out light bulb into a snowman using gouache. Hands-branches and buttons are depicted on white painted glass. The base without additional manipulations resembles a bucket; you need to draw a face under it. The ribbon at the transition to the expanding part will replace the character's scarf.

A figurine made of cotton wool looks realistic. To work, you will need a container of water and soap. In order for there to be enough cotton wool, it must be divided into three unequal parts in advance. The smallest is for the head, and the largest is for the lower part. The fingers are soaped and a sphere is formed from a small piece of cotton wool. Material is added gradually until the part reaches the right size. This technique involves rolling three pieces. The resulting balls should be dense.

Finished parts must be left until completely dry. The snowman is glued together using a special gun or PVA. Hands can be made using the same technique, from wire or from two branches of a suitable size. The nose and eyes are molded from plasticine or colored cotton wool. If you wish, you can sew clothes for a snowman from unnecessary scraps of fabric. A hat and scarf suit the character.

An old shabby ball is easy to renew, turning him into a snowman with his hand. The toy should be painted white. Draw a smiling face on one side with a marker.

Flat snowmen

Flat snowmen are successfully combined into long chains and replace garlands. The silhouettes of characters holding hands require only small touches to complete the look. Snowmen made from two parts look original. The bottom ball is depicted by an ordinary snowflake, the top one is a circle with a drawn face. Snowmen are decorated with top hats, scarves and brooms. A ribbon is threaded through the pattern of snowflakes and the figures are fixed on it.

To make it more fun for children to wait for the cherished holiday, you can glue together a special hybrid of a clock and a calendar in the form of a snowman. The outlines of the head, scarf and headdress should be cut out of thick paper. The face will serve as the dial. Instead of the traditional twelve numbers, 31 sectors will need to be marked on it for each day of December. The surface will be decorated with the painted face of a snowman, and a carrot nose will replace the arrow. To do this, its wide edge must be fixed in the center with a bolt so that rotation is carried out with light force. The arrow should not move on its own.

Three circles of different sizes, glued together, form a decoration in the form of a snowman with his head raised up. The smallest circle is decorated with eyes and a voluminous nose sticking up. The flat silhouette of the hat is located along the edge, and the branch arms are glued opposite each other from the second part. This craft can also be made from felt.

Cartoon characters

Children love to recognize characters they know in decorative toys. Small changes in the design can make the craft look like a snowman from a cartoon. Adults will appreciate the reference to Soviet animation.

DIY Olaf

Olaf is different from the traditional three-sphere snowmen. Any method above can be adapted to make Olaf, but you need to take into account the characteristics of the character's physique and image.

Characteristics:

• Cartoon Olaf's hands replace branches.
• The snowman's balls are flattened, and his head is slightly larger than the average figure.
• The upper segment has an oblong shape with a noticeable expansion in the cheek area.
• A wide, large, smiling mouth takes up almost half of the face.
• A hairstyle of three branches located close to each other is a must-have attribute.
• The snowman's legs are two lumps of snow, and his costume is decorated with large black coals.

To do Olaf from polymer clay You will need to roll two white balls. Both need to be squeezed between your fingers so that they become shaped like a round low pouf. For the legs you will need two smaller balls. They are rolled along the board to the shape of a low truncated cone. Pieces of toothpick are inserted into the lower sphere, and the legs are attached to them. A toothpick is inserted on top for the head.

The head ball is tapered towards the poles with your fingers. You should get a figure similar to a rhombus with rounded outlines. For the face, the rounding is slightly flattened upward, and a small space at the bottom and top is straightened. A sharp object outlines the cavity of the mouth. The outlines stretch forward a little. In the center above, two holes are pierced side by side for the eyes and another one for the nose, a little lower between them.

Alternating flat circles of black and white flowers, eyes are formed. The oral cavity is filled with black clay. A carrot made of orange plasticine takes the place of the nose, and two flat white teeth are glued to the edge of the thickening. The hairstyle can be made from a thin cherry cutting. There should be thin brown stripes above the eyes - rounded eyebrows.

When Olaf's face is ready, his head is placed on a toothpick. Arms-branches are inserted into the middle ball on the sides. Three black plasticine balls are glued to the structure in a vertical line, like buttons. The finished figurine is baked.

Snowman Postman It differs from Soyuzmultfilm by its massive belly. The transition from the thoracic to the abdominal part is smooth and weakly expressed. Distinctive features are a brand new bucket on his head and a bright red scarf. The nose is long and tapered, and the eyes are set wide. The facial features are thin and medium-sized. The hands are snowy and long, clutching a traditional broom. The character from the cartoon “When the Christmas Trees Light Up” is similar to the Postman, but his hands are replaced by branches in mittens, and the bucket on his head is complemented by a crack.

If your child has been asked to make a New Year’s craft for the garden or school, then our article is for you. We will tell you how and, most importantly, what you can make a snowman out of.

How to make a snowman from a sock with your own hands

White socks are an excellent preparation for a snowman. Mom's or dad's things will turn into a large snowman, and small socks will be suitable for making snowmen.

So, we need one white sock, scissors, stuffing, thread or elastic bands.

1. Cut off the bottom part of the whole sock.
2. We tie one end with an elastic band and then turn it inside out.
3. Fill a sock with any cereal. Bulk products will make the toy more stable and make it easy to shape it into the desired shape.
4. We also tie the other end with an elastic band.
5. Using our hands we give the snowman a slightly elongated shape. And to highlight the snowman’s head and torso, we tie the piece just above the middle. The bottom part should be slightly larger and thicker than the top.
6. Now you can make a hat from the remaining part of the sock. A narrow piece of any fabric will replace a scarf for a snowman.
7. All that remains is to make the eyes and nose, and glue two or three buttons to the bottom.

To get acquainted with the master class in more detail and learn better how to make a snowman from socks, watch the video.

How to make a snowman from plastic cups

A snowman made from plastic cups turns out to be large and charismatic. It can be placed in the classroom and in the children's room. Just leave more space!

The snowman will require more than three hundred plastic cups, a large stapler and glue. Our product will consist of two large balls. Let's start assembling the snowman from the bottom.

1. We fasten the first row of 25 cups in a circle using a large stapler. We connect the cups to each other neatly and evenly.
2. Now we place the following cups in turn on the resulting circle and connect them to each other and to the previous row. Thus, we complete the first half of the ball. By analogy, we perform the second half.
3. The top part of the snowman is also done, but for the first row of the head, 22 cups are already taken. Glue the resulting balls together.
4. We make the eyes and nose.

All that remains is to come up with a headdress for the snowman and choose a suitable scarf.

And the available video tutorial will clearly demonstrate the process of making a snowman from plastic glasses.

How to make a snowman from threads

The next master class will help you learn how to make aerial snowmen. They are based on balloons, glue and thread.

We choose PVA glue, it has good adhesion and does not leave yellow marks. We take white threads of any thickness.

1. Inflate the balloons so that one is slightly larger than the other. Let's connect them with tape.
2. Let's prepare the adhesive composition. To do this, pour a little PVA glue into a small container, then add water and mix everything.
3. Soak the threads in glue and begin to wind them in random order, first on one, then on the other ball.
4. After drying, you need to pierce both balls and pull out their remains through the threads.

The result was lace balloons. You can attach a thread or string to them and hang them on the Christmas tree. But we need a snowman made of threads. Therefore, we glue the balls together to make a snowman.

All that remains is to come up with a headdress and a scarf. Glue on the drawn eyes or buttons. A carrot-shaped nose is made from orange paper, folded into a narrow cone, or plasticine. Ready!

All the details of the master class are shown in our video.

DIY light bulb snowman (master class)

Don't rush to throw away your old incandescent lamps. Let's make cute snowmen from light bulbs that will decorate any Christmas tree. You can remove the internal parts of the lamp, but this will require carefully disassembling the top of the base. It's up to you to decide whether you will do this painstaking work.

1. The first step is to paint the glass part of the lamp with acrylic paint, using a sponge to apply it evenly over the surface.
2. After the paint has dried, the base is tied with a rope and a loop is glued to hang the toy on the Christmas tree.
3. The eyes, mouth and nose are made using beads or painted with paints, as in the photo.

Light bulbs are quite fragile, so you should not leave children unattended while working with them.

The full version of the master class can be seen on the video.

How to make a paper snowman

Paper is the most popular material among children. It gives a lot of possibilities for making various crafts and souvenirs.

How to make DIY Christmas cards with snowmen

Here's how to make a New Year's card with a snowman applique.

Prepare a white sheet of thick paper, cardboard, cotton wool and glue.

1. Fold the sheet in half widthwise and set it aside for now.
2. From white cardboard you need to cut out two touching circles, one slightly larger than the other.
3. We apply a layer of glue to the base of our snowman, and a thin layer of cotton wool on it.
4. We cut off all the excess and glue the snowman onto the main sheet.
5. We finish his hat, eyes and nose from beads.

Now let’s use our imagination and decorate the card at our own discretion. And our video will help with this.

DIY New Year's paper snowman in 3D

A gift card with a three-dimensional or so-called 3D applique looks interesting. This result is achieved by cutting and bending the elements of the postcard.

We will need two sheets of paper, and the white one should be 1 cm shorter in width and length than the colored one.

1. Fold a white sheet of paper in half widthwise and make two parallel cuts. This is how we designate the lower part of the snowman.
2. We bend the part resulting from the cuts and direct it inward.
3. We make two smaller cuts on one of the folds. And we also direct the bent part inward.
4. All that remains is to make the last two small cuts and again bend the resulting small element inward.

Now we open the card, and we get a three-dimensional snowman inside. Glue the wrong side of the white sheet onto the colored one. More details in the video.

The main element of such a card is a snowman made of several layers of paper, which give it volume and splendor.

• For the base of the postcard, take a thick sheet of cardboard, or two sheets are possible. different colors. Fold them in half.
• The snowman is made from two circles. For a fluffy snowman you will need at least 20 circles of each size. We cut them out of white paper and bend each one in half.
• We glue one upper and lower circle completely so that along the fold they coincide with the fold of the base sheet. Apply glue to the remaining circles only along the outer part of the fold, and glue them to the previous circle. And so on for all the top twenty pieces.
• And then the bottom twenty.
• All that remains is to decorate the card.

Detailed instructions - on video:

New Year's craft: paper snowman - garland

If desired, windows, walls and the Christmas tree can be decorated with a garland of snowmen.

1. Fold a white sheet of A4 scale in half lengthwise and cut along the fold line.
2. We put one part aside, and fold the second in half widthwise, and then again in the form of an accordion.
3. Now on the front side we draw the silhouette of a snowman so that its handles end at the edge of the sheet. This will be the place where the garland adheres.
4. We cut out the design along the contour, and we have part of our garland of four snowmen ready.
5. We also make a few more links of our product, and then fasten the parts (where the handles are) together with narrow tape.

Here's how it was done in the video masterclass:

Snowman on the window

The windows of houses with New Year's paintings. And if not everyone can take on Santa Claus and the Snow Maiden, then even a child can handle a snowman. Two or three white circles, a mouth, nose, eyes, a bucket on the head - and one of the main characters of winter is ready!

Today we told and showed how to make a snowman from paper, thread, plastic cups, socks and even ordinary light bulbs. Don’t forget to use our material if you want to make an original decoration for your home or as a gift to friends, or if a craft competition is announced at school or in the garden.