How to make paper rabbits. Origami rabbit for children: the easiest way

10.08.202027.05.2017

The origami rabbit pattern is available for all ages. Origami rabbit is performed according to the following points

1. Mark the middle line and fold the sides to it.

2. Consistently bend the halves of the upper side towards the central vertical. Let's open and flatten two pockets, turning the outlined lines of the “valley” into “mountains”.

3. Let's check the result - we got two triangles. Picking up one layer of paper, begin to align the long side of each triangle with its apex. Let's open and flatten two pockets from below. The upper edge of the figure bends down.

4. Check the result and turn the figure over.

5. Bend the sides towards the central vertical.

6. The position of the fold line is determined by eye.

7. Open the back of the resulting strip. The fold lines are on the inside. Their position is shown by dots.

8. The fold line extends from the corner and divides the corner in half.

9. Open and flatten the pocket, throwing the lower right part of the figure to the left.

10. Bend the left half of the figure back and rotate the figure.

11. Fold the left side in half, bending the horizontal edge down. Let's repeat the action from behind.

12. Pull out two layers of paper.

13. At the front and back, fold the left vertical edge towards the right edge.

14. On the right we will bend the triangle inwards, and on the left we will perform the technique invented by Neil Elis. This is not an easy action. There are three “ribs” at the top right of the figure. The first and third ribs must be flattened.

Origami rabbit is one of the most popular paper origami. If you don’t know how to make an origami rabbit, then on this page you will find everything you need to assemble this simple paper figurine.

In the first photo you can see what you will get if you follow the assembly diagram below. The second photo of the origami rabbit was taken by one of our site users. He made a rather interesting and at the same time simple paper rabbit. If you have photos of origami you have collected, send them to: This email address is being protected from spambots. You must have JavaScript enabled to view it.

Assembly diagram

Below is a diagram of how to assemble an origami rabbit from the famous Japanese origami master Fumiaki Shingu. If you strictly follow the instructions, then assembling the origami rabbit will not take much time, and the result will be the same as in the picture. After doing what is described in the diagram several times, you will understand how to make an origami rabbit quickly and without looking at the diagram.

Video master class

Assembling an origami bunny for beginners may seem challenging task. Therefore, we advise you to enter the query “origami rabbit video” on the largest video hosting site on the Internet, YouTube. There you will find a lot different videos about an origami rabbit, which clearly shows the steps to assemble a rabbit. We hope that after watching the video of the assembly master class, you will have no more questions about how to make an origami rabbit.

You can easily assemble a similar paper rabbit by watching this instructional video:

If you need an origami running rabbit, then this video will teach you how to make it:

Symbolism

In many cultures, the rabbit is a lunar animal, a companion of the lunar goddesses. The image of a rabbit was actively used in paganism. In a broader sense, the rabbit has become a symbol of fertility and vitality.

Origami paper figures can not only decorate a room and give the interior a thematic mood, but also be a great way to have fun and usefully spend time. How to make a paper rabbit? There can be a huge number of options for instructions. Some models, the simplest ones, can be made even by beginners.

Cute bunny

cute Easter decoration can become cute bunnies made with your own hands. It is advisable to use special origami paper, but this is not at all necessary. How to make a paper rabbit? If you practice well and carefully follow the instructions, this can take no more than one minute. It is better to start practicing the art of paper folding with the simplest figures that do not require much time and patience.

Required materials

To work you will need:

medium weight paper;
coloring materials (markers, paints, colored pencils).

Instructions for Beginners

First you need to decide on a color. This may be an ordinary white bunny, but you can also consider more interesting and bright options. You can draw the face and ears both before and after folding. But it is best to apply the toning and background pattern in advance. If paints are used for painting, then the main work should begin only after the base has completely dried. Detailed instructions will answer the question of how to make a paper rabbit. So let's get started:

1. Fold a square piece of paper in half diagonally to form a triangle.

2. Carefully fold the side of the triangle that previously served as the diagonal for the square.

3. Then we fold the figure in half so that the fold line from the previous step is not visible, and then unfold it back.

4. Take one of the sides of the triangle (the ear) and fold it towards the apex without crossing the fold line from the previous step.

5. Do the same on the other side.

6. Turn the rabbit face up and fold the bottom corner about 2cm inward to make the chin less pointed.

7. Do the same with the upper part of the muzzle.

Ready! So you’ve learned how to make a paper rabbit, even if it’s one of the simplest possible options. You can do everything according to a template, or you can go even further and use scraps of paper, natural materials, fabric, stickers, rhinestones and so on. Let your imagination run wild!

How to make an origami paper rabbit?

The jumping paper rabbit is a variation on the traditional origami jumping frog. This fun project is also fairly easy to make. Thanks to a special folding method, a spring effect is achieved. If you press on the rabbit's back, it will bounce up. Fast and fun, and so much fun for the kids!

What will you need? A sheet of paper, markers, scissors, glue or tape. Detailed instructions will show (origami for beginners):

Take paper or cardboard with dimensions of 6 by 10 cm. To achieve best results the workpieces must have straight sides and square corners. Bunny dimensions may vary. The main thing is to maintain the proportions (3:5). You also need to prepare small pieces of paper or cardboard of the same color to make the ears, otherwise the bunny will look more like a frog.
Fold the sheet along the dotted lines as shown in the picture. This will help to make a triangle in which there will be two more triangles.
Then fold the bottom ends of the large triangle towards its apex.
The sides of the rectangle are also folded towards the center.
After this, the lower part of the rectangle is superimposed on the upper part of the figure. The reference point for laying the fold is the lower corner of the rhombus.
We cut out two rabbit ears and use glue or tape to attach them to the animal’s head. You can also draw eyes and a nose on the head.
In order for the rabbit to be able to jump, you need to form a Z-shape from the back of the figure, which will act as a spring.
Everything is ready. Now you can have competitions with your friends to see whose bunny can jump the highest.

A great hobby for the whole family

Using paper you can make anything, from cute little animals to original decorative elements. Now you know how to make a paper hare with your own hands (origami). All you need: paper, paints, pencils and a little imagination.

Perhaps a funnier and cuter animal than a rabbit does not exist in nature. These cute creatures are endowed with everything to touch and touch us. And although not everyone can have this fluffy bunny as a pet, you can always make his figurine with your own hands. Such souvenirs will come in handy on the eve of the Easter holidays, because, according to legend, it is rabbits who bring sweet treats: chocolate eggs, fluffy marshmallows, fragrant cupcakes.

We invite you to make a symbolic paper animal with your own hands. We will look at several options for making paper rabbits - from simple to complex, requiring perseverance and skills in working with paper.

Make a bunny with your kids

The following version of a voluminous paper rabbit will be simple and quick to make. Take a standard set for creativity with children:

cardboard and colored paper (it is preferable to use double-sided paper);
glue stick;
scissors;
colored pencils or markers.

Work progress:

Cut out 2 wide strips of paper (width 5-6 cm, length of one of them 15 cm, the second 17 cm). The size of our rabbit will depend on the size of the strips.
We twist the strips into cylinders and fix the edges with glue. Then we glue the cylinders together. A small stapler is also suitable for these purposes. But it is best for an adult to supervise a child’s work with a stapler, as the child may inadvertently injure himself with sharp paper clips or get his finger pinched.
Next, cut out 4 ovals according to the template (2 large and 2 smaller). We cut off the edges of the ovals, forming the tips of the ears. We glue large and small blanks in pairs, bend the edges and glue them on top to the small cylinder.
Draw the nose and eyes. You can use ready-made adhesive eyes.
Glue the cut out legs to the bottom cylinder. To make the paws more stable, it is better to cut them out of cardboard or glue several paper parts together.

Cute bunny is ready! By the way, you can make other different animals using this pattern. It will be enough just to change the shape of the ears and draw different details of the muzzle.

Rabbit pack

Easter colors packed in a funny little bag will bring joy to anyone. Moreover, the implementation of such packaging will not be difficult.

Job Description

We make special markings on thick sheets of white paper.
Using a hole punch, make round holes along the edges.
Bend the shape according to the marked markings. Cut out the details of the ears and paws.
Using a black felt-tip pen or marker, draw a face and paws.
We glue the ears and paws with glue or double-sided tape. We stretch a satin ribbon through the holes.
Before tying a beautiful festive bow for the little bunny, we put inside a painted egg, small candies, and small toy souvenirs.

The surprise for the baby is ready! Joy for the whole day is guaranteed.

Origami

Children of primary school age will already be able to understand such a paper folding technique as origami.

The step-by-step progress of work is presented in the diagram:

The result is neat and precise step-by-step execution It will not disappoint either the master himself, or his family and friends, who will be presented with such a lovely souvenir in the future. If you choose white paper for work, then you can then decorate the rabbit’s face. If you choose colored or wrapping paper, the bunny will turn out to be cheerful and playful. In any case, all that remains is to draw the eyes, nose and antennae with a black felt-tip pen.

Having mastered the basics of origami, you can try folding more complex figures. It may be difficult for children to understand the diagrams, so be patient and take a little time to help your child understand the process of putting together their next masterpiece.

The same technique produces funny square bunnies. They are also called “inflatable” due to the fact that after folding, you need to blow lightly into the resulting hole so that the figure comes to life and takes on its 3D shape.

Application

How can you do without a holiday? greeting card for family and friends? And then funny bunnies rush to the rescue! Together with small children, you can make a figured card in the shape of a palm, imitating a rabbit's face.

Such mini-cards will undoubtedly delight grandparents. You should try to catch the fidget, persuade him to put his palm on a sheet of colored paper for a few seconds and manage to very quickly trace the contours. Then, carefully cutting out the imprint, bend your fingers: thumb and little finger forward (paws), bend the middle finger back. Index and ring fingers turn into bunny ears. Most likely, this process will captivate the child, and he will want to decorate the bunny’s face himself or stick on the prepared eyes and nose. Don’t forbid him to do this - no matter how neatly the craft turns out, in any case, this is a child’s creativity and it cannot be unsuccessful.

With older children it is suggested to make an applique from more blanks You can cut out the parts in advance, or you can invite the young master to do it himself. To make the bunny look voluminous, glue the parts onto the base using foam rubber double-sided adhesive pads. And when the card is ready, it won’t hurt to glue a funny envelope too!

Vytinanka

Decoration festive table This will definitely be your next easy to do craft. It is made using the vytinanka (cutting) technique. Print out the blank diagram on a printer in the amount of 2 copies. Using nail scissors, carefully cut out the figure along the contours and glue it in the marked places with PVA glue. The size of the rabbit depends on the size of the printouts. You can put painted stuff inside easter egg or light a small candle.

Modular origami

To make such little bunnies, you will have to be patient, because first you need to prepare a huge number of module parts. The next step is to assemble the paper hero itself from the blanks. Using not only white, but also colored paper, you can make funny little bunnies - a boy and a girl.

Funny bunnies made from waste material

It turns out that paper rabbits can be made from seemingly unnecessary material. Disposable paper plates, an ice cream stick, and cocktail straws(for the mustache).

Admit it when the roll runs out toilet paper, we, without even thinking, throw the cardboard tube into the trash. But you can give it a second life. Wrap the tube in wrapping paper, glue on the ears, paws, nose, eyes. And the paper animal is ready! This craft can be used as a pencil holder.

On the World Wide Web you can find a huge number of options for making paper rabbits. So, get inspired and feel free to start making fun crafts!

Let's try to master the art of origami using this gift paper rabbit as an example. It is assumed that you already know basic origami techniques like reverse folding.

Step 1: Materials

Colored paper
Penknife
Ruler

Step 2: Template

We need to turn it into an A4 sheet and cut the rectangles along the dotted lines. You will need 1 large, 1 medium and 2 small squares.

Step 3: Getting Started

Take a large square and fold it in half. The design must be visible from both sides from the outside.

Step 4: Preparation

We turn the sheet back to the side without the pattern to face us.

We bend the edges as shown in the picture so that 2 hieroglyphs are visible.

Step 5: Corners

We bend all 4 corners to the middle line of the square.

We get 2 triangles on the left and right. We bend them towards the center.

Step 6: U-Turn

Let's unfold it again. Now we need to make not 2 triangles on each side, but 2 rhombuses with identical sides. We hold the sheet with one hand, and with the other we slightly lift and smooth out first 1 triangle from above, then from below. We act similarly on the other side.