Heart ring pillows. Sewing a beautiful pillow for wedding rings with your own hands.

14.05.201827.05.2017

In the process of preparing for the wedding, it is necessary to take into account every detail, because the secret have a beautiful holiday It's in the little things. Even originally designed wedding rings will add a special chic to the celebration. Often, wedding accessories such as ring pads and cushions are usually designed in the same style.

In this master class we invite you to learn how to sew beautiful pillows for wedding rings with your own hands.

Before you start making wedding ring pillows, you need to think about their design and size. You will need various decorative elements - beads, rhinestones, stones, ribbons, braids. All decorative items and decorations can be purchased at a craft store.

Making wedding pillows with your own hands step by step.

For the pillow you will need the following materials:

Cut of fabric white;
Any pillow filling (we use synthetic fluff);
Threads in the color of the fabric.

Now let's see how to make your own wedding ring pillow.

3. Make cuts in the corners of the workpiece and turn it inside out. To make it more convenient to turn the product inside out, use a wooden stick. Straighten the corners well;

4. Then the ring pad needs to be filled with filler. Then sew it up with a hidden stitch;

5. So, the base of the wedding pillow is ready. Now start decorating. The edges of the pillow can be decorated with beads. To ensure that the beads lie symmetrically, mark the edges with pins. To make work easier so as not to constantly cut off new thread, after fixing the bead, carefully pass the thread with a needle inside the pad and bring it out at the place where the new bead is attached.

6. In this master class, roses and twigs were used for decorative finishing. In general, you can design the pillow to your liking. Flowers made of organza and satin look beautiful.

7. We make a bow from a satin ribbon. With its help, you can later attach the rings to the pillow. To secure the bow, make a few stitches and decorate the center with a bead.

8. The wedding ring pillow is ready.

Wedding pillows for rings: ideas

For a wedding in Tiffany style or nautical style, the best color scheme for decorating pillows - details in white-blue, light blue and turquoise.
The symbol of a Provence style wedding is purple and lilac.
White, ivory, white-peach and soft pink are ideal for a Shabby Chic wedding.
Bright and ardent natures prefer red and hot pink shades. Use red materials to decorate your wedding pillows. For more delicate combinations, complement red with white. White and red combinations are used in Russian folk and Ukrainian wedding styles. Nowadays the color Marsala is very popular.

For newlyweds whose wedding is scheduled for autumn, it is better to choose a yellow wedding color. All shades of brown and chocolate are ideal.
A wedding in a rustic style or a village wedding dictates its own rules. Are welcomed or burlap using natural materials– wood, wildflowers, moss, pine cones, dried flowers.
Perhaps no summer wedding is complete without floral elements in the design of wedding accessories. Fresh flowers and green herbs will add a romantic atmosphere to any wedding, especially if the wedding takes place outdoors.
An abundance of green will never be superfluous. Very fashionable shade Mint color is in the wedding palette today.

A wedding is an exciting event in the life of every girl, so you should carefully consider all the details that form a harmonious, charming celebration. The decor of the glasses, the hall, the cutlery - everything should be in the same style, which corresponds to the theme of the ceremony. Don't forget about details like the ring pad. We will tell you how to sew a pillow for wedding rings. It will be nice to photograph the rings on such a handmade item; it will work as an eye for the ceremony.

Master class: DIY pillow for engagement wedding rings

Every bride has her own idea of what her wedding ceremony should be like. Not a single lady will let the entire organization take its course and give it completely into the wrong hands. Some may think that a pillow for wedding rings is a trifle that is not worth attention, because at the wedding you will see it in a matter of minutes. But this is not so, because this cute little thing will be captured in the photo and be included in the unified image of the entire celebration, so it must be stylish, beautiful and unique.

To sew an accessory for wedding rings, you first need to decide on its shape. An accessory made with your own hands will be unique, with a twist, unlike a purchased one. It is better to sketch out all the ideas that come to your mind in the smallest detail. Show your imagination, use your creativity and create an original thing. There are many options for decorating ring cushions:

Embroider your own names on the place where the rings will lie. To do this, choose embroidery threads, pearls, beads, ribbons, and fabric.
It is not forbidden to decorate the pillow with your photo. To do this, you need to print it on fabric in the salon and then trim it.
Decoration with boutonnieres and appliques.
Decorate with ruffles along the edge of the product - choose braid, lace, ribbons, make gathers.
Embroidery around the edge of the floral design. In this case, it is interesting to combine several types of embroidery: for example, glass beads, beads and threads.
A heart-shaped pillow made of red satin or velvet looks very bright. It does not require additional decor, as it looks impressive on its own.
The cushion for the rings can be decorated with embroidered words of a vow of love.
It is not forbidden to sew a pillow in the shape of a shoe, toy, bird, etc.
The cushions for rings, which are decorated with artificial flowers and retro lace, look very interesting.
It is not forbidden to arrange a bed for rings on a flower-shaped stand.
An interesting technique is to put the calendar date of your celebration on the pillow.
It is not forbidden to give the pillow the appearance of a nest, basket, shell, heart, or flower bed.
The ring cushion can be placed in a book with a hiding place cut out inside.

This detail should be combined with the overall style of the wedding:

Classic - choose a fabric that matches the tone of the main color of the wedding. Fresh flowers, lace, and ribbons are used as decoration.

Glamorous - characterized by expensive fabrics, with large flowers, sparkles, rhinestones, large brooches, feathers, and beads.

Rustic style - it is characterized by burlap or other coarse fabric, lace, ribbons, flowers, knitted fabric, and the use of wooden details for decoration.

Retro - fabric of muted shades, lace, antique brooches, beads, polka dot fabrics.

Themed wedding - if the theme is nautical, then you should decorate the accessory in the same spirit, or use striped fabric.

Materials and tools

Once you have decided on the design of your wedding ring accessories, it's time to start shopping. Choose fabrics and accessories that you will need in the process. Most pads are made of white material to match the dress. Give preference to velvet, satin, chintz, silk, satin. It is better to stock up on a larger piece than is required for one product, because the first pancake may come out lumpy. In addition, you will need the following materials:

textile;
scissors:
threads;
needles;
synthetic winterizer, holofiber or cotton wool;
glue;
embroidery threads;
items for decoration: lace, rhinestones, sequins, beads, beads, ribbons, etc.

Pad size

If you want to make a wedding accessory for rings in the classic version in the shape of a square, then traditionally its size is 10x10 or 15x15 cm, no more. It is important not to exceed the given dimensions, otherwise the rings may get lost in the decor, but they play the main role. Pads of other shapes should also not go beyond the boundaries. A large accessory does not look touching and gentle.

Here are step-by-step instructions for creating a stylish wedding ring accessory. To make it you will need:

cardboard;
pencil;
white satin;
pink satin ribbon 0.5x30 cm;
white satin ribbon 1x50 cm and 0.5x30 cm;
padding polyester;
white threads;
white lace;
scissors;
needle;
ruler;
candle;
pins with eyes.

Step-by-step master class:

We cut out a cardboard template 10x10 cm. Fold the fabric in half with the front side inward, draw a contour according to the template, cut out the blank, departing from the contour 1 cm allowance.

We prepare lace measuring 5x12 cm. We place the lace on the front side of one satin square on both sides, close to the edge, and attach it to the fabric with pins. There will be a strip of free space in the middle on the fabric where the tape will go.
Place the second square of atlas face down on top. We fasten with pins.

We sew two satin pieces of fabric along the contour, leaving part unsewn.
We cut off the corners.

Turn the workpiece inside out.
We stuff the ring pad with padding polyester.

We make a seam on the pad until the end.
We singe the ends of a thicker white satin ribbon and wrap it around the pillow in the center.

We tie it in a knot. We tie it with another white ribbon, thinner, twice. Rings will be attached to the ends of the tape.
We tie the ends of a wide white ribbon with a bow.
We pass a pink ribbon through the top knot of the bow and tie it with a bow.

Original wedding pillows for rings photo

Looking for an original cushion for wedding rings? Why not sew it yourself?! We will tell you how to do it correctly, what you will need, we will provide step by step instructions. In addition, you can watch several video tutorials that will help you make a pillow from satin and gabardine. You will also find an option for creating an accessory on a sewing machine.

The size of the cushion for wedding rings should be medium (each side 15-20 cm). Too big will look awkward, and tiny ones risk getting lost.

When choosing a size, it is advisable to take into account what decor will be used. If large bows and flowers are provided, the size can be increased slightly. Refined decor (small bows made of thin ribbons and rhinestones) will look impressive on a small pillow (10-12 cm on each side).

What material is best to make it from?

To create an accessory you can use:

atlas;
silk;
gabardine;
lace.

The first two options are classics. Products made of satin or silk look elegant and emphasize the solemnity of the moment.

Gabardine is a denser material, it does not have a satin sheen, so it is suitable if the bride’s dress is richly decorated with satin inserts. This way the pillow will not blend in with the wedding dress.

How to decorate

For decoration use:

ribbons (satin, silk, lace);
bows;
rhinestones;
semi-precious and precious stones;
brocade;
guipure.

The amount of decor depends on the style of the celebration and the outfits of the newlyweds.

Abundant decoration is suitable for a royal-style wedding precious stones, brocade and silk ribbons.

For a classic celebration, it is more appropriate to use openwork or satin ribbons and, if desired, a little rhinestones.

Before you get started, it's worth finding out. You will learn what it is and how to put it on and take it off correctly.

In addition to the garter, they will help complement the look. In this article, we wrote about how to make them with your own hands. You can make a veil, veil and much more.

Haven't chosen an outfit yet? Here we wrote about different ones. You will find out how much dresses cost and where you can buy them.

Before purchasing an outfit, you need to find out. You can read about this in our other article.

How to make a wedding ring pillow with your own hands

A pillow for rings, which the bride sewed with her own hands, will add touchingness to the moment and will become a good amulet for a married couple.

From gabardine

Master class:

Wrap a piece of lace of the required size in gabardine.
Trim all sides.
Trim any protruding pieces of lace.
Make a small cut in the center of the resulting square and turn the accessory through it with the openwork fabric facing out.
Fill the pad with padding polyester or similar material through the hole made (distribute it evenly inside).
Sew up the hole through which the product was stuffed with filler.
Cover the seam with satin ribbon (you don’t need to sew it on, just use a good superglue).
Measure out the required amount of satin ribbon, which should be enough to “gird” the pad.
Carefully glue two equal pieces of tape along the length and sew the ends on each edge.
Glue a small rectangular piece of satin under the ribbon that will wrap the pillow.
Glue the prepared double tape over the piece of satin.
Decorate the product with threads of rhinestones or pearls, gluing them to the ends of the “encircling” tape.
Glue a couple of thin satin ribbons in the center of the pad and attach a brooch.

From the atlas

Prepare 2 pieces of satin of the same size, a wide lace ribbon and a satin ribbon 0.6 mm wide, filler (sintepon, cotton wool, etc.).
Fold the satin flaps so that all edges match.
Place a horizontal lace ribbon on top, in the center.
On 3 sides, applying a straight ruler, solder the flaps using a special soldering iron (leave the 4th side unsoldered - the product is filled with padding polyester through it).
When the filler is evenly distributed inside the pad, seal the remaining edge.
Using a needle and thread, pull the lace ribbon in the center so that its contours in the middle resemble a bow.
Glue the center of the resulting “bow” to the satin with superglue. Glue a large rhinestone on top in the center.
Using superglue, make a second bow from a thin satin ribbon (the rings will be attached to them) and attach them to the glue in the upper corner of the pillow diagonally.

In the shape of a heart on a typewriter - master class

Make a blank for the pad from thick cardboard. Fold a piece of cardboard in half and draw half a heart with a pencil. Cut out the heart along the outline.
Place the cardboard heart on a thick white fabric, folded in half, trace along the contour and cut out 2 hearts.
Sew accordion-folded tulle along the edges of one of the hearts.
Trim off excess tulle protruding beyond the edges of the heart.
Sew 2 hearts so that you can then turn the product with the tulle out.
Turn the pillow inside out and fill it with padding polyester.
Use a blind stitch to sew up the gap left when sewing the hearts together to fill the pad.
Trim the edges of the tulle.
Decorate the pillow along one edge with flowers twisted from satin (attach the decor to the pillow with superglue). It is advisable that the flowers be the same as those used in the bride's bouquet.
Make bows from satin ribbon to which the rings will be attached. Fold satin ribbons in several layers, forming a bow and sew in the center with threads.
Attach the bows with superglue. If desired, decorate them with rhinestones, sequins, etc.

Strictly follow the instructions given in the article, and you will definitely succeed!

A wedding is one of the most important days in the life of a couple in love; preparation for it lasts several months, because everything, even the most insignificant details, must be taken into account. During the wedding bustle, it is important not to forget about the wedding pillows on which the wedding rings will lie during the wedding ceremony. DIY ring cushions are not only profitable, but also exclusive, because your warmth and care are invested in them.

How to sew a square ring pillow?

To sew a white satin pillow we will need:

a piece of satin fabric;
roses made of satin ribbons;
decorations;
white or mother-of-pearl beads;
white threads;
lace frill;
needle;
padding polyester

To create a beautiful pillow, first we make patterns on satin. Using a ruler and pencil, draw a 12x12 cm square, and inside, exactly in the middle, a 10x10 square. The smaller square is the size of the pillow, and the extra 2 centimeters is for allowances. Now cut out another square, then carefully place the two pieces right sides together and stitch so that there is a small hole left so that the satin side of the pillow is turned out.

To ensure that the corners are even, they need to be carefully straightened with a needle. The next step is to fill the pillow with synthetic padding, plastic stick spread it evenly so that it fills the entire space, and when this step is completed, sew up the remaining hole. The main part of the work is finished, all that remains is to decorate our product with beads and lace.

Along the edges of the pillow, use needles to mark the places where the beads will be sewn. We string a bead onto the main needle and thread, make a stitch, thread a few more beads, then make another stitch, string the bead again, and so on until the entire perimeter of the pillow is completely trimmed.
Now let’s proceed to the final stage of making cushions for rings with our own hands; the photo will tell you how to beautifully decorate the upper part of the product. For this we need satin roses. Using white thread, sew the first one to the upper right edge, place two more roses next to it, they should form a triangle. We divide the fishing line into small sections and string beads onto each, securing them with threads next to the rose.

When all the decorations are secured, in the middle of the pillow we sew two white ribbons on which the rings will be held, we make bows from them, and on top we sew one bead for each bow. If desired, you can make one bow, and attach the rings not to its base, but to the ends of the ribbons.

Heart Shaped Wedding Ring Cushion

If you don’t like the classic square-shaped pillow, you can make a heart-shaped decoration. For this we need:

two pieces of material with embroidered elements;
padding polyester;
scissors and thread to match the color of the material;
lace braid;
satin ribbon;
decorations as desired (bows, beads, beads, rhinestones, etc.).

To make the pillow truly exclusive, on one piece of material we embroider the names of the newlyweds, the wedding date and one of the symbols of love (two rings, a dove and a dove, two swans, etc.). On the second piece of material you can embroider flowers, a landscape or even congratulations, the main thing is that it matches the wedding theme. First, you will need templates to properly sew the ring pads with your own hands. The master class video will help you avoid making mistakes.

Cut out hearts from each blank, sew a pillow out of them and stuff it with padding polyester as in the previous case. We make two bows from ribbons and sew them to the pillow, they will hold the rings.

If desired, the product can be decorated with a lace ribbon around the perimeter, beads, beads and rhinestones. But do not overdo it, since the basis of the composition is the drawing.

At a well-organized wedding, every little detail should look organic and emphasize the overall style of the celebration.

A ring pillow is a small but very important item that helps create the mood and perfectly complements the photo shoot.

In addition, a cute, cute, handmade ring pillow brings back pleasant memories even years later, and you can save it for history and then show it to your children along with wedding photos.

Shape selection

Usually the ring pad is a square pad measuring 10 x 10 cm, maximum 15 x 15 cm, stuffed with padding polyester. However, this rule is not strict.

If the wedding celebration is held in folk style, then the pillow for the rings may well be the size of a sofa: it is on such a pillow that rich embroidery looks especially impressive.

A pillow in the shape of a huge soft bright red heart would be appropriate. Some brides prefer round or oval pillows for rings.

If the theme of the wedding is close to maritime (about such weddings), then the pad can be shaped like an irregular oval - a shell, in the sharp corner of which the rings will be fixed.

The most important thing when making a pad is not to forget what it is intended for. Sometimes one of the witnesses gives the rings to the newlyweds, but most often this honorable duty is assigned to the child.

Therefore, the rings on the pillow must be held tightly: after all, their fall is a bad omen that can spoil the mood of everyone present.

There are three main options for attaching rings to a pad:

in the center or in one of the corners of the cushion, a recess is made, a “nest” for the rings, sufficient to prevent them from rolling off the surface of the cushion;
rings are tied on satin or gauze ribbons. It is important not to overdo it here: the rings should be held securely, but in such a way that the leader of the ceremony can untie them with one easy movement;
rings cling to any decorative element. The most convenient way to secure the rings is with large beads on the “legs”. You can also use satin bows or feathers sewn to the surface of the pillow using artificial pearls. The ring with a bow or feather threaded through it is well secured and can be easily removed.

Manufacturing

Having chosen the desired size and shape of the pillow, you should draw its pattern on paper. Then the material for the pillowcase is folded in half with the right side inward, a pattern is applied to it, and the contours of the future product are outlined with a tailor's chalk or a piece of soap.

The easiest way is to cut a square pillowcase: in this case, you will only need to make three seams. Do the following:

The workpiece should be cut not along the drawn lines, but with an indentation of about a centimeter from them: this is done so that the material does not split during stitching.
Then the pillowcase must be stitched or sewn by hand along the drawn lines, leaving a seam approximately 5 cm long unsewn.
Through this seam, the pillowcase is turned inside out and stuffed with padding polyester, previously torn into small pieces: this way the fabric will lie better.
Having stuffed the pad, the seam should be carefully sewn up.

Registration

Ring pads most often sewn from satin in white or pastel shades. For a rustic or retro wedding (weddings in this style) you can use unbleached linen or deliberately rough matting.

Easier and The fastest way is to decorate the pillow with a piece of guipure or lace. Guipure can be used to cover the entire surface of the pillow, its middle, or just a corner.

The main thing is to sew two satin ribbons or pearls for rings in the center of the applique. To prevent the ends of the ribbons from splitting, they are burned with a candle flame.

A contrasting strip of satin sewn onto a white pad looks impressive. In the middle, such a strip can be compressed with a clip with rhinestones to form something like a bow.

If burlap or canvas is used as the material for the pillow, cream lace goes perfectly with it. Instead of pearls, gilded hazelnuts are sometimes sewn onto such a pillow..

Often artificial flowers are sewn onto ring cushions. Large artificial roses or peonies on round pillows look especially impressive: then the pillow itself seems like a flower. Rings can be secured in the middle of the flower.

Small artificial flowers (apple trees, lilacs, daisies, daisies) sewn into the corner of a square pillow look cute in spring.

For a wedding in a nautical style, appliqués in the form of starfish or funny octopuses are often made on pillows. Various embroideries are also appropriate on pillows., and even simple ones that any girl can handle: stylized daisies, willow branches, hearts.

Custom ring pads

Last time Many brides use hand-sewn ones as cushions for rings. soft toys . Elephants with rings attached to their backs are especially popular: this is an Indian symbol of wealth and well-being.

Bear cubs, bunnies, and seals look no less touching. Ring stands are made in the form of tiny nests or wicker baskets, paved with straws and decorated with gilded cones and acorns.

For a rustic wedding, you can use a regular wooden hoop as a cushion for rings.: you just need to stretch burlap between them, trim the edge, trim it with cream lace, and sew an artificial daisy or just a curl from the same lace in the center.