Now you can forget about frozen feet! In the fall, we will be wearing divinely warm striped socks, which also look simply beautiful.
Size: 38
You will need: yarn (58% sheep wool, 20% polyamide, 15% possum wool, 5% alpaca, 2% elastane; 170 m/50 g) - 50 g each, soft yellow and mint color; set of double needles No. 3.
Rubber: alternately 1 facial. Purl 1.
Openwork pattern: knit according to the given pattern. Constantly repeat rapport = 13 sts between arrows. In height, constantly repeat the 1st-18th circle.
Alternating stripes:* 4 circles. mint color, 2 circles. pale yellow, from * repeat 2 times, 4 circles. mint color. ** 18 circle.r. pale yellow. 18 circle.r. mint color, from ** constantly repeat.
Double loop: at the beginning of the row (after turning), lay the thread before work, insert the knitting needle on the right into the 1st stitch and remove the loop along with the thread. Then pull the thread back strongly, as a result the loop will be put on the knitting needle and you will get a double loop of the loop. In the next row, knit both parts of the loop together and knit according to the pattern, knit or purl.
Knitting density: front stitch - 26 stitches x 40 circle. r. = 10 x 10 cm.
1st sock: Using a mint-colored thread, cast on 56 sts, distribute the stitches evenly on 4 knitting needles = 14 sts on each knitting needle and for the placket, knit 4 cm = 16 rounds. with an elastic band, while simultaneously starting to knit alternating stripes. Then continue knitting with an openwork pattern, while in the 1st round, evenly distributing, decrease 4 sts = 52 sts.
Heel: after 13.5 cm = 54 circles from the bar on one knitting needle, re-slip the first and last 17 sts = 34 sts. Set aside the remaining 18 sts. Knit 20 rubles with a mint-colored thread. facial stitch.
Then distribute these 34 sts on 3 knitting needles = 13/8/13 sts. Next, knit shortened rows with a double loop, 1st r. = front row: knit 21, turn.
2nd r. - purl row: perform a double loop, middle 7 sts, and purl the next loops, turn.
3rd row: perform a double loop, knit to the double loop, then knit a double loop and the next loop, turn.
4th row: perform a double loop, purl until the double loop, then purl the double loop and the next loop, turn. Repeat the 3rd and 4th rows until 18 stitches remain in the middle. After the last purl row, turn and perform 1 more double loop.
Now gradually include the outer 8 stitches on each side in the knitting as follows: in the front rows, constantly knit the last loop together with the next outer knit stitch with a slant to the left (= 1 slip off, as in knitting. 1 knit, then pull through the removed loop through it), turn and remove the 1st stitch, as in purl knitting.
In the purl rows, always purl the last loop together with the next outer loop, turn the 1st one. p. remove, as with knitting. Repeat until then. until only the middle 18 sts remain on the knitting needles. Now knit again in circular rows with alternating stripes, and transfer half of the heel stitches to the 1st and 4th knitting needles.
Instep wedge: Using the 2nd knitting needle, pick up 14 sts along the left side edge along the heel wall. Include the set aside 18 sts on the 2nd and 3rd knitting needles again in knitting. Using the 3rd knitting needle along the right side edge along the wall of the heel, raise 14 sts = 64 sts. Now on the 1st and 4th knitting needles there are 9 sts each and on the 2nd and 3rd knitting needles - 23 sts each. 28 sts continue to knit the openwork pattern = wedge of the instep, and the first and last 18 sts knit the front stitch = sole. Then lower the loops raised along the walls of the heel again.
For this, in the 2nd circle. r. knit the last loop from the 1st knitting needle with the next loop together, tilting to the left, and knit the last loop from the 3rd knitting needle with the next loop together, knitting it together. Repeat these decreases 2 times in each circle. r. and 6 times in every 2nd circle. r. = 46 p.
After 13.5 cm = 54 circle. r. from the beginning of the wedge, continue to knit the front stitch with a soft yellow thread with all the loops, for which the loops are evenly distributed on 4 knitting needles = 11/12/11/12 sts on the knitting needle.
Toe: decrease the loops as follows: knit the penultimate and last loops on the 1st and 3rd knitting needles together, and knit the 1st and 2nd stitches on the 2nd and 4th knitting needles together with a slant to the left.
Perform these decreases every 2nd round. r. and only until then. until there are 14 stitches left on each knitting needle. Place the last 14 stitches on 2 knitting needles one behind the other and knit 1 stitch from one knitting needle and 1 stitch from the other knitting needle together and cast off at the same time.
2nd sock: knit similarly.
Dimensions: 38-39 (40-41)
You will need: 100 g each of white, red, orange and gray wool blend yarn (200 m/50 g); stocking needles No. 2.5; 2 red cord holders.
Facial surface: persons r. - persons p., out. r. - purl n. In a circle. r. knit only faces. p.
Purl stitch: In circular rows, knit only purl. p.
Rubber: alternately knit 2, purl 2.
Openwork pattern A (29 p.): knit according to the pattern, in even circles. r. Knit all loops and yarn overs. Repeat the given loops from the 1st to the 24th round. p., observing the alternation of colors.
Openwork pattern B: the number of loops is a multiple of 14: also knit according to the pattern, but repeat repeat loops from the 1st to the 24th round. r.
Sequence of stripes: 2 laps r. * red, orange, white and gray thread, repeat from *.
Knitting density, knits. smooth surface: 28 p. and 40 r. = 10 x 10 cm.
Basic course. Knitting socks using the 4-step method
STEP 1: toe. The set of loops is the same for all socks. For the toe, cast on 6 loops and, distributing them onto 3 needles, close them into a ring (Fig. 1), making sure that the lower edges of all loops are directed downwards and the loops are not twisted. The end of the thread marks the beginning of the round. If necessary, it should be additionally marked with a thread of a contrasting color. When knitting, the mark moves upward along with the work and indicates where the circular row ends. Knit 1 circle. r. persons p. (ill. 2). Next round. r. perform 1 purl from each loop. increase by knitting a total of 2 sts from 1 st: knit 1 st, then use the left knitting needle to grab the lower link of the last knitted loop from back to front and knit. On these 12 sts, knit further knits. stitch, while in the next 2nd circle. r. perform 1 purl from every 2nd paragraph. addition = 18 sts. These sts are distributed as follows: 1st st. circle. r. forms the right middle st. The next 8 sts form the upper part of the foot, the next st. forms the left middle st and the remaining 8 sts form the sole. To widen the toe in every 2nd circle. r. perform 1 knit from the loop after both middle loops. addition (ill. 3), knitting 2 sts from 1 stitch: insert the right knitting needle into the next stitch of the circle below. r. behind the loop from front to back and knit this loop, while keeping the loop located above it from the knitting needle. Then knit this loop. Additionally, from the loop in front of both middle loops, perform 1 purl. addition = 4 additions in each circle. r. Repeat these additions every 2nd round. r. according to the table or instructions.
STEP 2: foot, heel and instep. Distribute the loops on 4 knitting needles as follows: the loops from the right to the left middle loop are evenly distributed on the 1st and 2nd knitting needles - they form the upper part of the foot, the remaining loops are evenly distributed on the 3rd and 4th knitting needles for the sole. For the foot, knit the number of circles indicated in the table or instructions. r. or see. Then for lifting in every next 2nd circle. r. From the loop after the right middle loop, perform 1 purl. increase, from the loop in front of the left middle loop, perform 1 person. addition. Repeat these additions according to the table or instructions. Simultaneously with the 3rd increase for lifting, begin to perform increases for the heel: from the loop after the left middle loop, perform 1 purl. increase and from the loop in front of the right middle loop, perform 1 person. addition. These additions should also be repeated according to the table or instructions. The instep and heel increments always end in the same circle. r.
STEP 3: Heel cup. For the heel cup, on the middle loops of the sole, knit the 3rd and 4th needles in straight and reverse rows, the number of loops is indicated in the table or instructions. On either side of the heel cup loops are the heel loops. Work the stitches of the top of the foot on the 1st and 2nd needles, as well as the right side stitches of the heel and all the stitches of the cup.
At the same time, knit the last loop of the heel cup with the 1st left side loop of the heel together with a broach (ill. 4): slip the 1st stitch as knit, knit the next stitch, then insert the left knitting needle from left to right into the removed loop, pull the knitted loop through it and lower it from the knitting needle. Turn the work and remove the 1st loop of the heel cup as a purl. At the same time, stretch the thread before work. Knit the remaining loops of the heel cup purlwise, while knitting the last loop with the next right side loop of the heel together purlwise. (ill. 5). thread, like purl. p., located in front of the left knitting needle. Insert the knitting needle from right to left through both loops, pull the thread through and lower the loops from the left knitting needle. * Turn the work again and remove the 1st stitch as knit, thread behind the work. Knit the loops of the heel cup, while knitting the last loop with the next left side loop of the heel together with a broach. Turn the work again and remove the 1st loop of the cup as a purl, stretch the thread before work. Knit the cup loops purlwise, while knitting the last loop with the next right side heel loop together purlwise. Repeat from * number of times according to the table or instructions. Note: For most sock sizes, the loops on the top of the foot may also be included in the heel cup.
STEP 4: pagolenok. The ankle begins at the end of the heel cup. In the 1st circle. r. knit the last loop of the cup with the next loop together with a broach. Knit the 1st loop of the cup with the previous loop together. (ill. 6), thread at work. Insert the right knitting needle from left to right through both loops, pull the thread through and lower the loops from the left knitting needle. As a result, the original number of loops is again achieved. Upon reaching the desired length of the leg, loosely close all the loops according to the drawing. Left sock: for socks with a side pattern on the leg, after the heel cup, distribute the leg loops symmetrically.
Right toe: for the toe, use white thread on stocking needles to cast on 6 stitches and basic course perform increases up to 18 sts. Knit faces. satin stitch To expand on both sides of both middle loops, add at the base rate in every 2nd circle. r. 10 x 4 p. = 58 p. Next knit as follows: knit the right middle loop. satin stitch in a sequence of stripes, on the next 28 sts knit with openwork pattern A, while to balance the pattern add 1 st = 29 sts. openwork pattern, the remaining stitches are knitted. in a sequence of stripes = 59 stitches in total. After 18 (19) cm from the cast-on edge, add to rise along the base course in every 2nd row. 8 (9) x 2 p. according to the drawing. Between them, simultaneously with the 3rd increase for lifting, add for the heel in every 2nd row. 6 (7) x 2 sts. satin stitch = 87 (91) sts. Then, on the middle 18 (20) sts of the sole, perform a knit heel cup. satin stitch with white thread. At the same time, on both sides, knit the last and first loops of the cup with the side loop of the sole together 14 (16) times = 59 sts. Then for the pagolenka, knit on all loops with an openwork pattern, in the 1st circle. r. knit the last loop of the cup with the next loop together, knit the first loop of the cup with the previous loop together. and additionally decrease to balance the pattern 1 p. = 56 p. After 36 circles. r. for an openwork pattern, knit 1 circle for the strap with white thread. r. persons p. and then knit with an elastic band. After 8 cm from the beginning of the bar for threading the cord, knit 2 knits. together persons and in return make 1 yarn over. These yarn overs are in the next round. r. knit faces. Knit another 3.5 cm with an elastic band and loosely bind off all the loops. Left toe: knit symmetrically.
Assembly: Twist 2 cords 50 cm long from a double red thread, thread them into the openwork row and blocks and secure with a double knot.
Many people like to knit striped multi-colored things. Even a product knitted with stockinette stitch, if there are bright colored stripes, will not look boring. It’s so easy to decorate and diversify knitting with horizontal stripes different colors Beginner knitters can do it too. Knitting something striped and multi-colored, what could be easier?
Knitting stripes with knitting needles is often used in mittens, hats, and sweaters. Where would we be without striped socks and scarves? For some reason, striped socks and scarves bring back pleasant memories of grandmothers who were needlewomen, don’t they? Mittens, socks, and even sweaters are easily knitted in the round. But, in knitting colored stripes in the round, when changing the color of the thread in a new row, a very unattractive step is formed.
When I knitted my first striped socks, I didn’t even think that it was possible to knit in any other way, without this terrible step, I had to put up with it. It was a long time ago... There was no Internet then, or rather there was, there was even a whole huge social network that had passed through years, generations, centuries, and it was called “Grandmothers”. Unfortunately, the handicraft grandmothers around me did not know how to knit even strips... With the advent of the Internet, sharing experiences has become much easier.
In this article, I want to suggest you look at a method that will allow you to get even stripes, without steps, when changing the color of the thread in knitting in the round. Just below in the photo you can clearly see that in the fabric knitted on circular knitting needles there is a smooth transition between strips of different colors.
In the photo below you can see how colored knitting in the round looks with and without a step
How to simply and evenly knit colored stripes on circular knitting needles without steps, watch in my new video!
Materials:
80 grams of camel wool, red and beige, 5 knitting needles No. 2 and 2.5. On stocking needles No. 2 with red yarn, cast on 64 loops for sizes 42-44, and 74 loops for sizes 45-47. Distribute stitches evenly on 4 needles. Knit 6-8 cm with an elastic band 2 x 2 (2 knit stitches, 2 purl stitches). Next, on knitting needles No. 2.5, knit 2 circular rows in stockinette stitch with beige yarn and begin knitting stripes, alternating 4 circular rows with beige yarn, 4 circular rows with red yarn, 2 rows with beige yarn. Then knit 2 rows of red and beige squares (2x2 loops), then again 2 rows of beige yarn and repeat the previous order of stripes in a mirror image.
Having knitted the second red stripe after the row with “squares”, proceed to knitting the heel using the “boomerang” method.
The boomerang heel is knitted on the loops of the 1st and 4th needles, which need to be divided into 3 parts. Set aside the stitches of the 2nd and 3rd needles.
First part of the heel:
1st row: (knit row) knit all the knit stitches. and turn the work around.
2nd row: (purl row) start by making a double loop: place the thread in front of the work, insert the knitting needle into the 1st stitch on the right, remove the loop and pull the thread back tightly (so that holes do not form later). The loop scrolls on the knitting needle and becomes double. Place the thread again before work, knit the remaining loops purl. and turn the work around.
3rd row: at the beginning of the row, perform a double loop, then knit. p. to the double loop at the end of the row and turn the work. Do not knit a double loop!
4th row: at the beginning of the row, perform a double loop, then knit. p. to the double loop at the end of the row and turn the work.
Then knit 2 circular rows of faces on all the loops of the sock. p., knitting each double loop in the 1st row as 1 loop. After this, put the loops of the upper foot aside again.
Second part of the heel:
1st row: (front row): knit right and middle stitches. and turn the work around.
2nd row: (purl row): perform a double loop, knit the remaining loops of the middle third purl. and turn the work around.
3rd row: perform a double loop, knit. p. to a double loop, knit it as one knit loop., knit the 1st p. of the left third. and turn the work around.
4th row: perform a double loop, knit. p. to a double loop, knit it as one purl loop, knit the 1st p. of the right third purl. and turn the work around.
Having finished forming the heel, knit again in the round on stocking needles all the loops of the sock to the end of the little toe.
To decrease the toe, divide the loops into 8 parts and knit the last 2 loops of each part together with a knit stitch, then repeat the decrease after 6 rows, after 5 rows, after 4 rows, after 3 and after 2 rows. Tighten the remaining loops with a working thread, and fasten and hide the end.
Dimensions
42/43 (44/45)You will need
Yarn (80% wool, 20% polyamide; 420 m/100 g) – 100 g each of yellow-black, black and green; stocking needles No. 2.5.Patterns
Rubber
Alternately knit 2 and purl 2.Facial surface
When knitting in rows in forward and reverse directions: front rows - facial loops, purl rows - purl loops.In circular rows, knit only knit stitches.
Sequence of stripes
*4 rubles each yellow-black, black, yellow-black and green, from * repeat.Knitting density
32 p. x 42 r. = 10 x 10 cm, knitted with stockinette stitch.Getting the job done
Using a yellow-black thread, cast on 72 stitches on the needles, distribute them onto 4 needles and close them into a ring (= 18 stitches on each needle).Knit the upper part of the sock with an elastic band, changing the colors of the threads in the specified sequence. After 19 cm = 80 kr. From the initial row, leave the stitches of the 2nd and 3rd needles for the top of the foot temporarily.
On 36 loops of the 1st and 4th knitting needles, work in stockinette stitch with black thread, while in the 1st row, evenly distributed, decrease 2 sts = 34 sts of the heel. Intermediate circle.r. knit with black thread.
Having finished the heel, continue working on all loops in the circle and knit the foot with yellow-black thread in stockinette stitch, while in the 1st round. on the area of the upper part of the foot, evenly distributed, decrease 2 sts = 68 sts. Knit a foot 20 (21.5) cm long.
Make a star toe: knit in stockinette stitch with green thread.
Knit the second sock in the same way.
Photo: Sabrina magazine. Special issue" No. 8/2015
