S (M) L (XL) XXL
Bust (finished product): 96 (104) 112 (120) 128 cm
Length: 66 (68) 70 (72) 74 cm
Sleeve length: 50 (51) 52 (52) 53 cm
Materials
Yarn Novita Teddy bears (75% wool, 25% polyamide, 100 g/260 m) 5-5-6-6-7 skeins, circular knitting needles 3 mm and 3.5 mm, 5 buttons
Knitting density
23 stitches and 31 rows = 10x10 cm in stockinette stitch on 3.5 mm needles
Description of men's knitted sweater with polo collar
Back
Cast on 3 mm knitting needles 113 (121) 131 (141) 149 sts and work with an elastic band 1x1 (1 knit stitch, 1 purl stitch) 7 cm + 1 edge stitch. at the beginning and end of the row. Switch to 3.5 mm needles and continue knitting in stockinette stitch. After 44 (45) 46 (48) 49 cm from the cast-on edge for the armholes of the sleeves, close 4 (4) 6 (6) 7 sts at the beginning of the next. 2 rows, then 2 stitches at the beginning of the next row. 2 (2) 2 (4) 4 rows. Next, decrease 1 stitch on each side in each knit. 4 (5) 5 (6) 7 r.: edge st., 1 knit st., broach, knit to last. 4 loops of a row, 2 stitches together, knit 1, edge stitch. = 93 (99) 105 (109) 113 p.
At sleeve armhole height 20.5 (21.5) 22.5 (23.5) 23.5 (24.5) cm for shoulder bevels, close at the beginning of every 2nd row on each side 2x3 loops 5x4 loops (1x5 loops and 6x4 loops) 3x4 loops and 4x5 loops (2x4 loops and 5x5 loops) 7x5 loops. At the same time, during the fifth decrease for the sleeve armholes in the next. person.b. for the collar, move the center. 31 (31) 31 (33) 33 p. for extra. knitting needle Finish both parts of the back separately, while on each side in the neckline line close 5 loops. There will be no loops left on the knitting needles.
Before
Cast on loops and knit as a back piece to a height of 32 (34) 36 (38) 40 cm. In the next. person.b. knit the first 54 (58) 63 (68) 72 p., *1 p. from the purl broach, 1 knit p., repeat from * 4 more times = 64 (68) 73 (78) 82 p. Turn knitting, set aside the rest loops for extra knitting needle Continue knitting the right part of the front, on the left side for the collar placket, knit 10 loops with a 1x1 elastic band, the remaining loops with stocking stitch. After 5 cm from the division, make the first button loop: knit until the last one. 6 loops of the strap, yarn over, 2 stitches together, then knit according to the pattern. Make 3 more loops with a distance of 5 cm between them.
At the same time, after 44 (45) 46 (48) 49 cm from the cast-on edge, close the loops for the armhole as for the back = 54 (57) 60 (62) 64 p.
When the height of the armhole is 13 (14) 15 (15) 16 cm, move it to additional for the collar. knitting needle first 14 (14) 15 (15) 15 (15) sts. Next, in the neckline line, close in every 2nd row 3 loops 3 times and 1 st 5 times (knit using a broach). After 22 (23) 24 (24) 25 cm from the beginning of the armhole, close the remaining. 26 (29) 32 (33) 35 shoulder stitches.
From persons sides, attach the thread to the set aside 54 (58) 63 (68) 72 p. of the left part of the front, from the side of the cut, cast on new 10 loops = 64 (68) 73 (78) 82 p. Knit the left part of the front symmetrically to the right part, buttonholes There is no need to knit, but decreases in the neckline line are knitted as 2 stitches together.
Sleeves
On 3 mm needles, cast on 53 (55) 57 (59) 61 sts, knit 7 cm with 1x1 rib. Switch to 3.5 mm needles and continue with stockinette stitch. After 13 (11) 8 (14) 13 cm from the cast-on edge, add 1 stitch on each side, repeat a series of additions every 2.5 (2.5) 2.5 (2) 2 cm for a total of 14 (15) 17 (18) 19 p. = 83 (87) 93 (97) 101 p.
After 50 (51) 52 (52) 53 cm from the cast-on edge, close the sleeves for piping 4 (4) 6 (6) 7 p. at the beginning of the next. 2 rows, then 2 stitches at the beginning of the next row. 6 rows, then decrease 1 stitch on each side 10 (11) 13 (13) 15 r. in each person, then close 2 sts at the beginning of the next. 4 rows and 4 more stitches at the beginning of the next row. 2 rows. Close remaining loops.
Knit the second sleeve in the same way.
Assembly
Sew shoulder seams.
For the collar along the edge of the neckline from the faces. raise sides 121 (123) 123 (125) 127 p., incl. delayed loops. Knit with an elastic band 1x1, after 2 cm, tie the last one. buttonhole on the right side. After 3.5 cm, close the loops according to the drawing.
Sew on the sleeves by connecting the red dots on the pattern. Sew side seams and sleeve seams. Sew buttons.
What could be more romantic for a woman in cold weather than the image of a man in warm knitted sweater near? Probably just the fact that this sweater was knitted for him with his own hands. Such a wonderful gift as a knitted sweater will warm and give a feeling of comfort to even the most brutal young man, you just need to choose the model of the future sweater based on the preferences and tastes of the man in order to surely hit the mark!
To begin with, it’s worth considering several options for knitting men’s sweaters. There are a huge variety of models, as well as methods of knitting sweaters, pullovers, and jumpers. Here you need to know what a man will definitely like: braids, aranas, relief patterns, funny designs with deer, or minimalism and rigor in every line of a knitted item.
Let's take a closer look at a few possible options knitting sweaters to make it easier to choose the most suitable one. Beginning needlewomen will also be able to surprise loved ones with their skills; they just need to follow the diagrams and descriptions exactly.
Knitted men's sweater - diagrams with descriptions
If a needlewoman has only recently begun to master the art of knitting, but really wants to please loved one pleasant and a beautiful thing DIY is not a reason to take on small “projects” like knitting hats, scarves or vests. Knitting a sweater is quite possible for beginners; it is only important to choose a simple model to begin with and carefully follow the instructions. Let's look at several options for knitting sweaters that are suitable for both beginners and experienced knitters.
The simplest model for beginner needlewomen
Popular articles:
First, let's try to knit a men's sweater wide elastic band. We'll get a casual option for everyday activities.
Sweater sizes:
48/50 (52/54) 56/58
To work you will need:
- Yarn (100% sheep wool sectional dyeing; 100 m/50 g) 650 (700) 750 g;
- Knitting needles No. 5;
- Circular knitting needles No. 5, 50 cm long.
The main pattern is knitted:
Alternately - 4 knits, 2 purls.
Knitting density:
16 p. x 22 r. = 10 x 10 cm.
Work progress:
Back
Cast on 90 (96) 102 loops on knitting needles and knit as follows: edge, 1 purl, 14 (15) 16 x 6 stitches each with the main pattern, 1 purl, edge.
After 45 (46) 47 cm = 98 (100) 102 r. from the initial row, close on both sides for armholes 2 (3) 4 p., then in every 2nd r. 1 x 2 p. and 3 (4) 6 x 1 p. = 76 (80) 84 p.
At armhole height 21 (22) 23 cm = 46 (48) 50 r. close for shoulder bevel in every 2nd r. 2 x 6 (7) 8 p.
Simultaneously with the first decrease for the shoulder bevel, close off the middle 32 stitches for the neckline, then knit both sides separately.
Along the inner edge for further rounding, close in every 2nd r. 3 x 1 p., then bind off the remaining 7 p.
Before
Cast on 90 (96) 102 loops on knitting needles and knit as follows: edge, 1 purl, 14 (15) 16 x 6 stitches each with the main pattern, 1 purl, edge. Next, knit like the back, but with a deeper neckline.
To do this, at an armhole height of 17 cm = 38 r. bind off the middle 26 stitches, then knit both sides separately.
Close along the inner edge for rounding in every 2nd r. 6 x 1 p.
Start performing the shoulder bevel at the same height as on the back.
Finish the other side in a mirror image.
Sleeves
Cast on 42 (48) 54 stitches on the knitting needles for each sleeve and knit as follows: edge stitch, purl 2, 6 (7) 8 x 6 stitches each with the main pattern, purl 2, edge stitch.
For bevels, add on both sides every 6th r. 5 x 1 p., in every 8th p. 5 x 1 p. = 62 (68) 74 p. Include increases on both sides in the pattern.
After 47 (48) 49 cm = 104 (106) 108 r. from the initial row, close the sleeves on both sides for piping 2 (3) 4 p., then in every 2nd p. 1 x 2 p., 4 x 1 p., 1 (2) 3 x 2 p., 2 x 3 p. and 2 x 4 p.
In the next row, bind off the remaining 14 sts.
Assembly
Moisten the parts, stretch according to the sizes indicated in the pattern, pin on the pattern and leave until completely dry.
Sew shoulder seams.
Using circular knitting needles, cast on 74 (80) 86 stitches along the edge of the neckline and knit with the main pattern 20 (21) 22 cm = 44 (46) 48 stitches, close the loops loosely.
Sew side seams and sleeve seams, sew in sleeves.
Handsome model with pattern for men
Subjects knitted clothes often associated with northern culture, since many knitting methods came from countries with a predominantly cold climate. Knitted relief patterns, motifs, arans and braids have always been incredibly popular not only when creating women's clothing, they are often chosen when knitting things for men and children. Therefore, you definitely need to learn how to knit a men’s sweater with a pattern and try to create it yourself. Let's look at the pattern and description of knitting a sweater model in a rustic style with embossed large patterns and a high collar.
Sweater sizes:
To work you will need:
- Yarn (85% wool, 15% mohair; 50 g/60 m) – 27 (28) 30 (31) skeins of white, undyed;
- Knitting needles No. 4,5 and 5;
Product width and length:
- Chest circumference - 108 (116) 124 (132) cm;
- 69 (70) 71 (72) cm.
Knitting density:
Approximately 20 p. x 27 r. = 10 x 10 cm, knitted with a relief pattern using knitting needles Nos. 4,5 and 5. To ensure that the knitting density corresponds to the specified one, fragments of the structural pattern are made according to the pattern on knitting needles of different thicknesses - Nos. 4,5 and 5.
If the instructions indicate only one number, then it applies to all sizes.
Knitting pattern:
Work progress:
Back
On knitting needles No. 4.5, cast on 108 (116) 124 (132) sts and knit with a relief pattern according to the pattern (1st row = purl row).
When the length of the part is 44 cm, begin to form armholes. To do this, fasten the mark in the middle of the back and close on both sides (at the beginning of each row) 3, 2, 1, 1, 1 p. = 92 (100) 108 (116) p.
When the height of the armhole from the mark is 23 (24) 25 (26) cm, begin to form the neckline: close the middle 18 (18) 22 (22) sts and finish both sides separately.
Then at the beginning of the next 2 p. close from the inner edge to round the neck, 3.2 p.
At the same time, cast off 10, 11, 11 (12, 12, 12) 12, 13, 13 (14, 14, 14) stitches from the outer edge for the shoulder bevel at the beginning of each row.
Before
Knit like a back, but only with a deeper neckline.
When the last 11 cm remains to be knitted to the end of the part (check along the back - to the last closed loops of the shoulder bevel), close the middle 8 (8) 10 (10) sts and finish both sides separately.
Close from the inner edge to round the neck at the beginning of each row 3, 2, 2, 1, 1, 1 (3, 2, 2, 1, 1, 1) 3, 2, 2, 1, 1, 1, 1 ( 3, 2, 2, 1, 1, 1, 1) p.
Having knitted to the first closed loops of the shoulder bevel (check along the back), close the loops in the same way.
Sleeves
On knitting needles No. 4.5, cast on 52 (56) 60 (64) sts and knit with a relief pattern according to the pattern (1st row = purl.
row).
Important: distribute the pattern in both directions from the middle, indicated by an arrow in the diagram.
When the length of the part is 10 cm, add 1 stitch on both sides (after/before the edge loop). Repeat these increases every 6th row, including the added loops in the pattern, = on the needles 84 (88) 92 (96) sts.
When the length of the sleeve is approximately 48 (49) 50 (51) cm, close for the edging on both sides (at the beginning of each row): 2 times 2 sts, 2 times 3 sts, 2 times 4 sts and 2 5 times each. Then bind off the remaining loops.
Assembly
Sew the parts on the front side with mattress and knitted seams = mattress - longitudinal edges of the parts (= 1 p. x 1 p.), knitted seam - edges with closed loops.
Sew side seams and sleeve seams. Sew the sleeves, starting from the shoulder seam and the middle of the sleeve, sew down both sides, then sew the sleeve into the armhole at the bottom.
Stand collar
On circular knitting needles No. 4.5, cast on loops from the front side, starting from the right shoulder seam: 1 st from each closed loop along the edge of the back neck + 5 additional sts at the beginning and end (distribute the loops evenly); 1 st from each row down to the last 2 closed loops on the left side of the front; 1 p. from each closed loop; On the right side of the front, cast on the loops as on the left (the total number of loops should be a multiple of 4).
Knit in the round: 1 r. purl, 1 r. facial, 1 rub. purl and 1 r. facial
Then continue knitting in the round with an elastic band (= alternately knit 2 and purl 2) until the collar height is 16 cm, and bind off the loops.
Knitting pattern with braids
Knitting a men's sweater with knitting needles is a special pleasure, because this thing will give warmth to the person important to you. Moreover, this thing can also become a real decoration for a man. More complex relief patterns in the form of braids, weaves and cones are just right for this. Let's take a closer look at how to knit a men's sweater with braids - a fashionable classic for all times.
Sweater sizes:
48/50 (52/54) 56/58
To work you will need:
- Yarn (100% sheep's wool; approx. 170 m/100 g) approx. 800 (800) 900 g sulfur;
- Knitting needles No. 4,5 and 5;
- Circular knitting needles No. 4.5, length 40 cm.
Patterns and schemes
Rubber: alternately knit 3, purl 2.
Cross elastic: alternately knit 2, purl 2.
Facial surface: front rows - facial loops, purl rows - purl loops.
Patent Pattern (A)
Knit on 7 loops according to the diagram (= segment A).
1–4th r. repeat 1 time, then 3rd and 4th p. repeat constantly.
Pattern "Pine cones" (B)
Knit on 11 loops according to the diagram (= segment B). IN
1–6th r. repeat constantly.
Braid pattern (C)
Knit on 24 loops according to the diagram (= segment C).
1–26th r. knit 1 time, then 3–26 p. repeat constantly.
Alternating patterns
Knit and distribute stitches according to instructions.
Knitting pattern and description
Knitting density:
18 p. x 28 r. = ok 10 x 10 cm, knitted with stockinette stitch;
25 p. x 28 r. = ok 10 x 10 cm, knitted with an alternating pattern (average density).
Work progress:
Back
On knitting needles No. 4.5, cast on 115 (125) 135 loops. For the belt, knit with an elastic band 17 r. (= 6 cm), with the 1st r. – purl, start with 3 knit stitches. In the last r. add, evenly distributing, 13 sts = 128 (138) 148 sts.
Then switch to needles No. 5, distribute the loops as follows: edge stitch, 0 (3) 6 stitches in stockinette stitch, 7 stitches in patent pattern A, 3 (5) 7 stitches in stockinette stitch, 7 stitches in patent pattern A, 9 stitches . cross rib, 74 p. alternating patterns between arrows a and b, 9 p. cross rib, 7 p. patent pattern A, 3 (5) 7 p. stockinette stitch, 7 p. patent pattern A, 0 (3) 6 p. stockinette stitch, edge stitch.
After 33.5 (32) 30.5 cm = 94 (90) 86 r. close from the elastic on both sides for armholes 3 (4) 4 p., then in every 2nd p. close 1 x 2 (3) 3 p., 3 (4) 5 x 2 p. and 2 (3) 4 x 1 p. = 102 (102) 106 p.
After 20 (21.5) 23 cm = 56 (60) 64 r. close from the armhole on each side to bevel the shoulder 8 (8) 9 p., then in every 2nd r. cast off another 3 x 8 sts.
Simultaneously with the 1st decrease for the shoulder bevel, close off the middle 18 (18) 20 stitches for the neckline and finish the left side first.
Along the inner edge for further rounding, close in every 2nd r. another 2 x 5 p.
Finish the other side in a mirror image.
Before
Knit like a back, but for a deeper neckline after 15.5 (17) 18.5 cm = 44 (48) 52 r. Height of the armhole, close the middle 16 (16) 18 points and finish the left side first.
Along the inner edge for further rounding, close in every 2nd r. another 2 x 3 p., 1 x 2 p. and 3 x 1 p.
Perform shoulder bevels as on the back.
Finish the other side in a mirror image.
Sleeves
Using knitting needles No. 4.5, cast on 60 stitches for each sleeve.
For the cuff, knit with an elastic band 17 r. (= 6 cm), with the 1st r. – purl, start with 3 knit stitches. In the last r. add, evenly distributing, 8 sts = 68 sts.
Switch to needles No. 5. Distribute the loops as follows: edge, 5 sts with patent pattern A from arrow c, 9 sts with cross elastic, 7 sts with patent pattern A, 24 sts with braid pattern C, 7 sts with patent pattern A, 9 sts with cross stitch elastic, 5 p. patent pattern A to arrow d, edge.
For bevels every 3.5 cm = 10 r. from the cuff add 1 p. on both sides, then in every 10th p. add 2 x 1 p. and in each 10 (8) 6th p. 7 (9) 11 x 1 p. = 88 (92) 96 p. Added loops after reaching full patent pattern A (= 7 sts) knit in stockinette stitch.
After 45 (43.5) 42 cm = 126 (122) 118 r. close from the cuff to roll up the sleeves on both sides 3 (4) 4 p., then in every 2nd r. close 1 x 3 p., 4 (3) 3 x 2 p., 10 (12) 14 x 1 p., 2 x 2 p. and 2 x 3 p.
After 13.5 (15) 16.5 cm = 38 (42) 46 rubles. the height of the sleeve hem, close the remaining 20 (22) 26 sts.
Assembly
Sew shoulder and side seams.
For the collar, use circular needles No. 4.5 to cast on loops along the edge of the back neckline 38 (38) 40 stitches and along the edge of the front neckline 42 (42) 45 stitches = 80 (80) 85 stitches. Knit alternately 2 knits, 3 purls. After 23 cm = 62 r. close the loops according to the drawing. Turn the collar right side out.
Sew the seams of the sleeves, sew in the sleeves.
Men's knitted melange jacket with zipper
Differing data for size 52/54 are given in parentheses. If there is only one number, then it applies to both sizes. To you you will need: Auster-mann yarn “Smaragd Classic” (100% wool; 125 m/50 g) - 500 (550) g each green and sea green; knitting needles No. 6 and 7; circular knitting needles No. 6, length 60 cm; detachable zipper 65 cm long.
Attention: knit the product in 2 threads, connecting a green thread with a sea green thread. All details are knitted with chain edges. Edge edge “chain”: in each row, knit the 1st stitch with the front stitch crossed, remove the last loop, as in purl knitting, with the thread in front of the loop.
Rubber:
alternately 1 knit, 1 purl. Facial surface: front rows - front loops, purl rows - purl loops.
Structural pattern: knit according to the pattern. The numbers on the right indicate the front rows. In purl rows, knit loops according to the pattern. The distribution of the pattern in width is given in the description of the details; repeat repeat = 4 stitches before the middle between arrows a and b and after the middle between arrows c and d. In height after 8th r. repeat from 1st to 8th row. Knitting density: 14 p. x 20 r. = 10 x 10 cm, knitted in a structural pattern using knitting needles No. 7.
Jacket pattern:
Back: cast on 86 (92) sts in 2 threads on knitting needles No. 6 and knit 6 cm = 13 r. with an elastic band, and start from the purl row. Continue working with a structural pattern using knitting needles No. 7 in the following sequence: edge, 1 (4) sts before arrow a, 9 repeats = 36 sts from arrow a to b, 10 sts from arrow b to c = middle, 9 repeats = 36 p. from arrow c to d, 1 (4) p. after arrow d, chrome. After 35 cm = 70 rub. close from the elastic on both sides for the armholes, 2 p., then in every 2nd r. 4 times 1 p. = 74 (80) p. After 25 cm = 50 r. from the beginning of the armhole, close on both sides for shoulder bevels 9 (10) p., then in every 2nd p. 2 more times, 8 (9) sts each. Simultaneously with the 2nd shoulder decrease, close off the middle 14 sts for the neckline and finish both sides separately. To round the neckline, close from the inner edge in the 2nd row. 1 time 5 p. Finish the second side symmetrically.
Left shelf: cast on 47 (50) sts in 2 threads on knitting needles No. 6 and knit 6 cm = 13 r. with an elastic band, and start from the purl row. Continue working with a structural pattern using knitting needles No. 7 in the following sequence: edge, 1 (4) sts before arrow a, 9 repeats = 36 sts from arrow a to b, 8 sts from arrow b, edge. I will make an armhole and a shoulder bevel from the right edge, as on the back. At the same time after 18 cm = 36 r. from the beginning of the armhole, close 6 stitches from the left edge for the neckline, then in every 2nd row. 1 time 3 p., 1 time 2 p. and 5 times 1 loop.
Right shelf:
knit symmetrically to the left front, start the structural pattern from the 3rd p. after arrow b.
Sleeves: cast on 44 stitches in 2 threads on needles No. 6 and knit 6 cm = 13 r. with an elastic band, and start from the purl row. Continue working with a structural pattern using knitting needles No. 7 in the following sequence: edge, 4 repeats = 16 stitches from arrow a to b, 10 stitches from arrow b to c = middle, 4 repeats = 16 stitches from arrow c to d, edge . For bevels, add 7 p.m. on both sides. from the elastic band 1 p., then 12 times in every 6th p. 1 p. = 70 p. Added loops are sequentially included on both sides in the structural pattern. After 47 cm = 94 r. close from the elastic on both sides to roll 3 sts, then in every 2nd p. 2 times 2 p., 9 times 1 p., 3 times 2 p., 1 time 3 p. and 1 time 4 p. In the next row, bind off the remaining 12 loops.
Assembly: Pin the details onto the pattern, moisten and leave until dry. Make seams. Along the edge of the neckline, cast on 77 stitches on circular needles in 2 threads and knit a stand-up collar with an elastic band, starting after the edge with 1 purl loop. At a height of 6 cm, loosely close the loops according to the pattern. Sew a zipper from the bottom edge to the end of the collar. For the inner strips, cast on needles No. 6 in 2 threads of 4 stitches and knit 65 cm each in stockinette stitch, bind off the loops. Sew the strips over the zipper tape. Sew in the sleeves.
Size 48-50.
You will need: 500 g of yarn (50% wool, 50% PAN; 100 g/200 m); knitting needles No. 3.5 and No. 4; zipper 18 cm long. Reel: 2 front, 2 back.
Double (or hollow) elastic: an even number of loops. 1st row - 1 knit, 1 purl; 2nd and all subsequent rows - knit 1, slip 1 p., thread in front of the loop.
Knitting density: pattern according to pattern 10 - 29 p. x 24 r.; stockinette stitch - 17.5 p. x 24 r. - 10 x 10 cm.
Back: on knitting needles No. 3.5, cast on 134 sts, knit 2 rows with purl loops and 18 rows, repeating from 1st to bth rows schemes 10 (- 6 rapports + 2 edges). Then add 2 purls in each repeat, as shown in the diagram (- 146 sts). Continue with needles No. 4 and knit once from the 19th to 32nd rows and then repeat from the 33rd to 44th rows. At a height of 70 cm from the beginning, close all loops.
Before : similar to the front, but for the neckline at a height of 54 cm from the beginning, close the middle 2 stitches and then finish both sides separately. After 9 cm to round the cutout, close with inside 10 sts and in every 2nd row 1 time 3 sts, 2 times 2 sts and 5 times 1 st. At a height of 70 cm from the beginning, close off the remaining 50 sts of the shoulder. Sleeve: on knitting needles No. 3.5, cast on 52 sts and knit 8 cm with an elastic band, in the last purl row evenly add 6 sts, knitting them crossed from the broach between the loops (- 58 sts).
Continue with knitting needles No. 4 and knit in the following order: knit, knit 3, repeat 24 stitches of pattern 10 twice (start and repeat from rows 33 to 44), knit 3, knit. To expand, add 1 stitch on both sides in every 4th row 32 times (- 122 stitches) and knit them in stockinette stitch. At a height of 54 cm from the beginning, close on both sides in each 2nd row 5 times for 10 stitches and 1 time for the remaining 22 stitches. Knit the second sleeve in the same way.
Assembly: sew shoulder seams. For the collar, use knitting needles No. 2.5 along the edge of the neckline from the wrong side, cast on 80 stitches and knit 17 cm with an elastic band, finishing next to the front stitch. Fold the collar in half on the front side and kettle the open loops along the edge of the neckline. For the placket, along the vertical edge of the front cut and along the edge of half the collar, using knitting needles No. 3.5, cast on 50 sts and knit 1 cm with an elastic band, close the loops. Knit a similar strip on the wrong side. Make the same strips for the second half of the polo cut. Insert a zipper between the strips and sew. Sew side seams and sleeve seams, sew them into armholes.
Knitting pattern for a men's sweater 
Legend Sweater pattern 38/40 (42/44) 46/48 You will need
Yarn (100% natural wool; 120 m/50 g) - 550 (600) 650 g gray-brown; knitting needles No. 4.5.Patterns and schemes
Garter stitch
Front and back rows - front loops.Purl stitch
Front rows - purl loops, purl rows - front loops.Facial surface
Front rows - front loops, purl rows - purl loops.Rubber
Odd number of loops.Front rows: alternately 1 purl, 1 knit crossed, finish with 1 purl.
Purl rows: alternately 1 knit, 1 purl crossed, finish with 1 knit.
Basic pattern
The number of loops is a multiple of 3.1st row: purl loops;
2nd row: * purl 3 loops together, while keeping the loops on the left knitting needle, 1 yarn over, then purl the loops again and lower them from the knitting needle, from * constantly repeat.
3rd and 4th rows: stockinette stitch.
Repeat rows 1–4 constantly.
Knitting density
22 p. x 32 r. = 10 x 10 cm.Pattern
Getting the job done
Back
Cast on 129 (141) 153 stitches on knitting needles and knit 1 purl row as follows: knit 3, purl 123 (135) 147, knit 3. This series is not taken into account in subsequent calculations.Then for the placket, knit 1 cm = 4 rows as follows: 2 p. in garter stitch and 1 p. in purl stitch (= placket), 123 (135) 147 p. in rib stitch, 1 p. in purl stitch and 2 p. in garter stitch (= bar), while in the last purl row on the loops of pattern 4, knit purl loops.
Then, on the middle 123 (135) 147 loops, continue working with the main pattern, continue to knit the outer 3 loops with a bar.
For the end of the side vents, after 12.5 cm = 40 rows from the bar, add 1 loop on both sides = 131 (143) 155 p. and knit between the edges with the main pattern.
After 41 cm = 132 rows (43.5 cm = 140 rows) 46 cm = 148 rows from the bar, close for shoulder bevel on both sides 1 x 3 (3) 4 sts, then in every 2nd row 11 x 3 sts . (5 x 3 p. and 6 x 4 p.) 11 x 4 p.
After 48.5 cm = 156 rows (51 cm = 164 rows) 53.5 cm = 172 rows from the bar, knit for a stand-up collar on the remaining 59 stitches. Another 5 cm = 16 rows according to. pattern.
Then knit 2 rows in stockinette stitch and then bind off all stitches as if knit.
Before
Knit like a back.Sleeves
Cast on 62 (71) 80 sts on the knitting needles for each sleeve and knit 1 purl row.Then for the strap, knit 1 cm = 3 rows with an elastic band and 1 purl row with purls, while for sizes 1 and 3, finish the elastic with 1 knit crossed.
Then, between the edges, continue working with the main pattern.
For a low sleeve roll, after 37.5 cm = 120 rows from the placket, close off 1 x 3 stitches on both sides, then in every 2nd row 5 x 3 stitches.
After 41 cm = 132 rows from the bar, close off the remaining 26 (35) 44 sts.
Assembly
Sew shoulder seams and side collar seams. Sew in the sleeves, sew side seams and sleeve seams.Photo: Sabrina magazine No. 9/2017
