Size 46
““ sleeves, like , were very fashionable in their time. And even now they can look very impressive. It’s not for nothing that they say: the new is the well-forgotten old. Fashion is capricious and changeable. And they emphasize their individuality and personal style.
And this model is knitted from 450 g of light bulky yarn (300 m in 100 g). you need 3 and 3.5 mm.
Knitting density: 17 loops of 10 cm - horizontally, 30 rows of 10 cm - vertically; and also 10 cm openwork knitting– 7 motives.
Mating used: stockinette stitch, 1x1 elastic band and openwork “stars”: 3 knit stitches are knitted from three knit stitches.
The sleeves are knitted in a star pattern. Gradually expanding, according to the pattern, each sleeve goes into the front and back. The front is made with purl stitch. The back is in stocking stitch.
Rice. 1 Pullover with batwing sleeves. Star pattern pattern
Now for the pattern sample "star" cast on 13 loops plus 2 edge loops (Fig. 1):
1st row: 3 knit stitches are knitted from three knit stitches; This is done like this: first we knit 3 loops together, then 1 yarn over, again 1 knit loop into the same three loops that we have already knitted together, and drop all the loops from the left knitting needle, then 3 knit loops; 1 front.
2nd row and all even rows: We purl all 13 loops.
3rd row: 2 knit stitches, 3 knit stitches from three knit stitches, 3 knit stitches.
5th row: the pattern is repeated from the 1st row.
Getting the job done
Sleeves(Fig. 2, a). On 3 mm knitting needles, cast on 41, plus 2 edge stitches and knit 7 cm with 1x1 rib. Now switch to 3.5 mm knitting needles and then knit with a star pattern. When moving, in the first front row, add loops as follows: 1 front loop, knit 3 knits from one - and continue until the end of the row. Now continue knitting according to the pattern, gradually adding loops to widen the sleeves at the beginning and end of each knit row. Having thus widened the sleeve, according to the pattern, and turning into the front, finish it with a relief roller. For this purpose, knit a strip of 3 cm in stocking stitch. Please note that in the first knit row you should cut every 4th loop, knitting 2 knit stitches together.
Before(Fig. 2, b). Only purl stitches go across the face. On 3.5mm needles, cast on 50 stitches using cotton thread and knit 2 rows. Switch to the main yarn and knit with purl stitch a fabric in the form of a rectangle 47 cm high. Then switch to 3 mm knitting needles and knit 4 cm with a 1x1 rib. After this, close the loops.
Back(Fig. 2, c). Do the same for the front, with the only difference being that the front side will consist of knit stitches.
Instructions
Start knitting from the left sleeve. To do this, tie an elastic band, about ten to fifteen centimeters. Then knit the required number of rows of the sleeve using satin stitch or another pattern, gradually adding several loops on each side.
Reach the middle of the sweater and finish knitting symmetrically, with decreases becoming increases and vice versa. Knit the remaining rows. After this, you need to reduce the required number of loops, and tie ten centimeters of elastic on the remaining loops, then close all the loops.
Cast on the required number of loops along the bottom edge of the front and back and knit with an elastic band about sixteen centimeters. Then close all the loops.
Connect the parts of the product, while doing the side seams and sleeve seams. Work around the neckline by purling one row and cast off all stitches. Not so knitting a bat sweater. Lay out your product and gently iron it through a damp cloth. Now you can knit a lot more of different shapes and colors with an original and unusual sleeve.
Sources:
- knitting bat sleeves
The “Bat” cut sweater is relevant in any season and for any body type. U overweight women such a thing will hide all the flaws of the figure and emphasize the advantages. For the thin ones, this is a real treasure. It will fit perfectly on you, remove too thin areas of your arms and highlight your waist beautifully!
You will need
- - yarn;
- - knitting needles;
- - pattern.
Instructions
A little short of reaching the middle of the shoulder, close the loops on the neck. Find the middle of the knitting and mark it somehow or just remember it. Set aside 1/4 of the neck circumference or the size of the neckline you would like to get in the end. Mark these points too.
Start the row from one of the sleeves, work to the first mark and bind off the loops intended for the neck on one side of the middle and on the other. Remember their number. Knit a row along the second sleeve. If you closed the neckline strictly along the middle line of the shoulder, pick up the loops in the next row. From the beginning of the sleeve, knit to the neckline, make a set of loops and continue the row along the second sleeve.
Decrease the loops on the sleeves in the same order in which you added them. That is, if the sleeve is straight, knit quietly to the bottom of the armhole, and then immediately close the loops on both sides so that only those from which you will knit the front remain on the knitting needles. In the second case, close the loops gradually, not forgetting to try on new sleeve sections to the existing ones.
A product with a dolman sleeve does not necessarily have a straight horizontal neckline. It can be with a clasp or a V-neck. In this case, it is more convenient to start with the part that does not have a fastener. Until the neckline, knit in exactly the same way as in the previous method. But after that you will have to first knit one half to the end of the fastener, and then the other.
Or you can start knitting a bat sweater from the cuff. First knit the cuff itself, then knit the sleeve, gradually adding loops on both sides. You can expand it immediately. The main thing is to remember how you did it, because you need to lower the loops on the second sleeve in the same order.
Knit to the side seam. Add loops at the same time from the front and back sides. Work straight to the neckline, then divide the work. Slip one part of the loops onto a thread, and continue knitting the second to the end of the neckline. Then return to the second piece, tie them to the second edge of the neckline and connect the pieces. When you reach the second side seam, decrease stitches in the same order as you added them. Try to maintain symmetry as much as possible.
Video on the topic
Unusual style knitted cardigan With all-knit dolman sleeves with a strict collar, vertical braids that elongate the silhouette, it turns out to be universal, suitable for a formal outfit and for a weekend evening.
Size: 36-42
You will need: 525 g of beige yarn 100% Cashmere Fine (100% cashmere, 87 m/25 g) Lana Grossa; knitting needles No. 4.5, circular knitting needles No. 4.5.
Rubber: alternately knit 1, purl 1.
Pearl Pattern: alternately knit 1, purl 1, shifting the pattern in every 2nd r. by 1 p.
Rib and pearl pattern with braids: knit according to the A/B pattern. In those not shown in the diagram, purl. r. knit loops according to the pattern. Repeat rapport loops. For the elastic, follow pattern A 1st - 5th p. 1 time, repeat the 4th and 5th rows, for a pearl pattern with braids according to scheme B, perform the 1st - 10th row. 1 time, repeat 5th - 10th r.
On the 1st perform additions to align the patterns as indicated.
Patent edge 3 points on both sides: knit according to pattern C. Work 3 stitches on both sides between the arrows at the beginning and end of the row. The dots in the gap indicate the row located between the patent edges. Perform 1 time 1st - 3rd row, repeat
2nd and 3rd r.
Knitting density: 25 p. and 32 r. = 10 x 10 cm (pearl pattern with braids, knitting needles No. 4.5).
Description of knitting cardigan:
BACK WITH HALF SLEEVES: cast on 111 sts and knit the bar with an elastic band according to pattern A trace, starting from purl 1. row: chrome, knit 16 stitches before the 1st arrow (7 stitches from the left edge apply only to the front), 6 repeats = 84 stitches, 9 stitches after the 2nd arrow, chrome.
After 4.5 cm = 15 r. from the bar, knit with a pearl pattern with braids from the 1st row, reading the pattern on the right, as follows: chrome, 9 stitches with a pearl pattern in front of the 1st arrow, 6 repeats = 90 stitches (including additions in each repeat, as indicated ), 17 p. with a pearl pattern with braids after the 2nd arrow, chrome. = 118 p.
After 12.5 cm = 40 rub. from the bar for bevels of the kimono on both sides, add 1 p. again, in the 6th p. 1 x 1 p., in every 4th p. 8 x 1 p., in every 2nd p. 16 x 2 p., 1 x 3 p., 1 x 4 p., 1 x 5 p., 1 x 6 p., 1 x 10 p. and 1 x 43 p. = 344 p. With increasing number of loops, go on a circle, knitting needles.
Include the loops added on both sides into the pearl pattern with braids and after the last additions, knit the first and last 3 stitches with a patent edge. The pearl pattern with braids begins and ends on both sides with 1 braid track 8 sts wide, as after the 1st arrow. For sleeve width, knit straight. After 18.5 cm = 58 r. from the last addition for the neckline, close off the middle 20 stitches and knit further separately, closing along the edges of the neckline in every 2nd row. 1 x 6 p. and 1 x 5 p.
After 1.5 cm = 6 r. from the beginning of the neckline, loosely close off the remaining 151 sts on both sides.
LEFT SHELF WITH HALF SLEEVE: cast on 64 sts and knit the bar with an elastic band according to pattern A. distributing the loops next. way, starting from 1 purl. r.: chrome, 3 points of patent edge, 23 points before the 1st arrow, 2 repeats = 28 points, 9 points after the 2nd arrow, chrome.
After 4.5 cm = 15 r. from the bar, knit with a pearl pattern with braids from the 1st row, reading the pattern on the right, as follows: chrome, 9 stitches with a pearl pattern in front of the 1st arrow, 2 repeats = 30 stitches (including additions in each repeat, as indicated ), 24 p. with a pearl pattern with braids after the 2nd arrow, 3 p. patent edge = 67 p.
113 additions from the right edge for the shape and half of the sleeve, as for the back = 180 p. After 15.5 cm = 50 r. from the last addition, set aside 20 stitches from the left edge for the neckline, then close for further rounding in every 2nd row. 1 x 3 p., 2 x 2 p. and 2 x 1 p.
The remaining 151 stitches of the sleeve - the shoulder - can be closed freely at the height of the back.
RIGHT SHELF WITH HALF
SLEEVES: knit symmetrically.
ASSEMBLY: make seams. Using circular knitting needles, cast on another 59 sts = 99 sts along the neckline to the set aside 20 sts and knit for a double stand-up collar with a pearl pattern, starting from the purl. r., and perform a patent edge on both sides. After 10 cm = 32 r. From the beginning of the collar, loosely close the loops according to the pattern. Fold the collar in half inward and sew it on.
If we can do without a pullover or a white blouse, then we can’t do without a sweater. The cold period of the year is dangerous for colds, so it is so important to choose warm clothes that will suit you. Today there are many styles of women's winter and autumn-spring sweaters. Non-standard shapes and styles are held in special esteem, for example, women's sweater bat. The style of this sweater is called so because of the characteristic batwing sleeve, which stands out clearly when raising the arms. The style owes its appearance to the women's kimono. After the batman sweater gained popularity in the 40s, there were fashionable resurgences in the 80s and 90s. A sweater with a bat sleeve becomes as comfortable as possible thanks to its rather wide top and narrow bottom. The finished product looks elegant and stylish, emphasizing the beauty of the figure.
Looks especially stylish knitted sweater bat, hiding the fullness of the arms and shoulders. This sweater fits best fat girls, because it removes some shortcomings. But even slender representatives of the fair sex can rightfully appreciate the benefits of this thing! Based on its purpose, a sweater can have several cutouts, be long or short, and models are often decorated with various elements decor. Extravagant styles have a cut to the middle of the back, emphasizing the slimness of the figure. Also popular is a sweater model with a slit along the entire length of the sleeve, as in the photo. A variety of shades and styles of bat sweaters allows you to choose a worthy option for yourself!
What to wear with a bat sweater?
The most comfortable to wear are loose-fitting sweaters, for example, those with dolman sleeves. What to wear with such a sweater? You can easily combine it with jeans, trousers and skirts. Wide straight trousers are good with a sweater that is shorter than hip level, but for tapered skinny jeans it is better to choose a slightly longer sweater.
If you have chosen short sleeve bat, for example, elbow-length or ¾-length, then wear a turtleneck underneath. You can emphasize the slenderness of your arms by choosing a turtleneck in a contrasting shade. A loose-fitting sweater with a wide belt at the waist looks great. A too voluminous option can be quite successfully diluted with a scarf, accessories around the neck and a brooch.
A sweater with a V-neck and batwing sleeves perfectly lengthens the silhouette and makes the figure slimmer. If you have plump arms and hips, choose a long-cut sweater; it will perfectly hide all imperfections. For a formal appearance, a sweater model with rhinestones and slits on the shoulders is good. We also note that if you have problems with your figure, you should not emphasize it relief patterns. Best option- ordinary tightly knitted sweaters.
A bat sweater can be worn both to the office and to a party. Everything will depend on the shape and cut of the product. The main rule is to wear heels, especially for short girls, since this style somewhat reduces height. Also keep in mind the following: the longer your sweater, the more tapered your pants should be.
Give preference to any shades, but remember the rule that light colors visually increase volume, while dark ones, on the contrary, hide extra pounds. Thanks to the variety of styles and shades, it is now possible to choose any sweater with bat sleeves. So feel free to go shopping!
Jacket "bat" with knitting needles, knitted across
Women's jacket knitted, made of thick yarn with batwing sleeves.
The jacket is knitted across.
Size: Russian, 42/44 (46/48, 50/52), the photo shows size 42/44.
Materials: 800 (900, 1000) g of Steinbach Wolle Sport yarn (acrylic + wool, 100 g/140 m), knitting needles No. 6, 4 buttons, additional knitting needles.
Knitting density: 13 loops * 20 rows = 10 * 10 cm in stockinette stitch using knitting needles No. 6
Cross 4*4 to the left: remove 4 loops on an additional knitting needle for braids, leave them before work, knit 4 knits. from the left knitting needle, then knit 4 knits. with an additional knitting needle.
Cross 4*4 to the right: remove 4 loops on an additional knitting needle for braids, leave them at work, knit 4 knits. from the left knitting needle, then knit 4 knits. with an additional knitting needle.
Rubber:*K1, P1, repeat from *.
Braid (= 12 loops):
1st row: 12 persons.
2nd and all purl. rows: 12 purl.
3rd row: cross 4*4 loops to the left, k4.
Rows 5 and 7: faces. loops.
9th row: knit 4, cross 4*4 to the right.
11th row: knits. loops.
12th row: purl. loops.
Repeat rows 1-12 for pattern.
How to knit a bat jacket
Right sleeve: Cast on 39 (41, 43) loops.
Knit a row with facial loops.
At the same time, add 7 stitches evenly along the last row of ribbing.
Next knit: 17 (18, 19) loops in purl stitch, 12 braid loops, 17 (18, 19) loops in purl stitch.
In the second row of work, add 1 loop on each side.
Repeat adding 1 stitch on each side, every 4th row, until you get 77 (80, 83) stitches on the needles.
Knit evenly without increases to a height of 52 (53.5, 55) cm from the elastic band.
Close off the central 6 stitches for the neckline, knit the back and front separately.
Shelf: close from the neck side in every second row 3 loops - (1, 2, 1) times, 2 loops - 2 times and 1 loop - 6 (5, 6) times.
At a height of 61 (63.5, 66) cm, start knitting with an elastic band, knit 1, purl 1. – 6 rows.
Simultaneously make 4 holes for buttons (knit 2 together, yarn over) along the 3rd row of elastic.
Back: Continue knitting in purl stitch.
At a height of 61 (63.5, 66) cm, place the stitches on an additional needle.
Left sleeve: knit symmetrically to the right one, knit the front and back also symmetrically.
Do not make holes for buttons.
Close the loops on the back of the right and left sides together, sewing it in this way.
Bottom binding: Sew the sides, cast on 115 (127, 139) stitches along the underside of the front and back.
Knit with rib knit 1, purl 1. – 10 rows.
Close the loops.
Neck strap: Cast on 69 (73, 77) stitches along neckline.
Knit with rib knit 1, purl 1. – 6 rows.
Close the loops.
Sew buttons.
Knitted bat jacket, pattern:
