How to make a swing from plasticine. Entertaining lessons on sculpting figures from plasticine

15.08.202027.05.2017

You should not mistakenly believe that swings in the country are made exclusively for children’s fun. In addition to swings designed for the weight of a child, there are plenty of interesting options, which will become a wonderful element landscape design and a place of relaxation.

What to make a swing from?

Traditionally, swings are made of wood, metal, and a combination of these materials. However, the swing seat can be made of plastic, metal pipes, beams, strong rope, an old chair or a chair without legs. Tires and other waste materials are often used.

The main thing is that it is comfortable and safe to sit on the swing, and that the stands can withstand the loads placed on it.

Country swings are often equipped with canopies made of fabric, polycarbonate, wood, and roofing materials. This “roof” protects from bright sunlight; you can sit on the swing without the risk of burns.

What types of swings are there?

Soft swing chair

Before building a swing, you should think about its purpose (for children or adults to ride), location (excessively large models are inappropriate in small areas), and seasonality (it is not appropriate to leave swings outdoors for the winter at all dachas). It is also important to choose a model that fits well into the overall picture of the country landscape.

The swing can be mobile (collapsible) or stationary.

In turn, mobile swings can be suspended or equipped with a prefabricated frame that is installed on the ground.

Do you want to make a children's swing at the dacha for a child?

A children's swing is a great idea on how to entertain a child at the dacha, and the portal website also offers you information on. If you already have a sandbox, then read the article about building a playground with your own hands -.

You can make your own swing-balancer, swing-hammock, swing-sofa. Special attention deserve designs that are far from the classical representation of a swing design. Unusual swings can be:

And just recently, swings for disabled children appeared. Platform design wheelchair allows you to ride even for those who, unfortunately, cannot move independently.

Prices for garden swings

Garden swing

Making a hanging swing with your own hands

There is no frame provided for such swings. We will only make a seat, which we will later attach to ceiling beams or thick branches with chains or ropes.

Have you decided on the design of your swing?

Option 1. The simplest swing is an old tire tied with a rope and hung on a tree. You can also use a chain and secure it with a screw and nut.

Option 2. Place the tire horizontally. We cut 3 or 4 holes, insert metal hooks into them, which we secure with washers and nuts. We thread ropes or chains into the loops of the hooks.

Option 3. This is the most difficult option, which will require mastery of an angle grinder. The tire should be cut according to a certain pattern, bent and secured with long pins so that the resemblance of an animal or bird is obtained. One of the methods for making a country swing can be found below.

A swing made from boards (cut logs, wooden lattice, etc.) and ropes is a classic. It is enough to make 4 holes in the corners of a wide board and thread the ropes.

Instead of a board, you can use an old children's high chair, sawing off the legs and tying it with ropes.

A metal (steel or aluminum) hoop must be equipped with rope weaving so that a cobweb-seat is formed in the center. It is advisable to wrap the edges of the hoop with foam rubber and cover it with thick fabric. And to hang the swing, you will need several strong ropes, metal rings or other fasteners that must be secured at least four points around the circumference.

As one of the options, you can consider a swing-hoop, inside of which a metal basin is inserted. The edges of the pelvis should hold firmly to the hoop. Subsequently, the structure can be easily disassembled and re-qualified as a flower garden.

To make such a swing you will need two wide metal triangles, rivets and the material itself - tarpaulin. We fold it in several layers, stitch it around the perimeter, insert triangles and fasten it with rivets. All that remains is to hang the swing on a branch or beam.

To assemble a wooden swing on stands, prepare the following:

We use galvanized bolts as fasteners for such swings. We refrain from using simple screws and nails.

To further protect the material from damage and preserve it natural look we use glaze. We first coat all wooden structural elements with it.

The finished swing is hung on a strong branch or fixed on racks with a cross beam laid on top of them. Use a wooden beam to assemble the support structure.

The lower ends of the wooden posts are treated with bitumen. To fix the racks, it is enough to dig a couple of holes about 1 m deep, install the racks in them, fill 20-30 cm of the height of the hole with a mixture of sand and crushed stone, and then pour concrete.

If you wish, you can make separate concrete pillars and attach a wooden beam to them with anchor bolts. Do what is most convenient for you. When using the second method, be sure to lay moisture-proofing material between the metal and wood. To give the frame greater stability, we support the racks with braces.

Options for attaching a seat for a swing

We make the swing itself in accordance with the following step-by-step instructions.

First step. We make supporting arcs-sticks. To do this, we use boards 22 mm thick (preferably pine) and plywood 12 mm thick. In accordance with the diagram, we draw a template and cut out 6 clubs.

Second step. Using plywood blanks, we outline the outlines of the core. The layer in the middle is made of glued board. In the outer layers of the outer sticks we create cutouts for the ends of the rope.

Third step. We fasten the parts of the support using waterproof glue. We tighten the support with clamps. We remove them only after the glue has completely dried.

Fourth step. We process the edges of the supports with a sander, giving them a rounded shape.

Fifth step. We cut out round pieces for the rope holders from a pine board. This is easiest to do using the appropriate drill attachment.

Sixth step. We treat the supports and finished rounds with a primer or weather-resistant paint.

Seventh step. We screw metal rope holders into the supports through roundels, and then cover the wooden elements

Eighth step. Let's move on to creating a seat for a homemade wooden swing. First of all, we align the picket fence.

Ninth step. Next, drill holes for screws in each plank. To make the holes as carefully as possible, we put a corner on the edges of the picket fence (can be made from plywood) according to the size of the planks with pre-made holes in the right places.

Tenth step. Screw the pickets to the supports. To ensure an even step, we place planks between the slats.

Eleventh step. We fix the armrests to the supports. We also make them from picket fences. We screw the metal bolts into the end of the planks. We place a wooden round between the support and the armrest.

Twelfth step. We thread the rope through the holes of the holders fixed in the swing support. We tie the rope into a sea knot, then we wrap wire, strong thread or cord around it.

Thirteenth step. Cut off the free edge of the rope using a knife.

Fourteenth step. We pass the rope through the oval hole in the armrests. We rest the armrest itself on blocks mounted on a pair of half-rings secured with bolts.

Fifteenth step. We wrap the rope around the cable thimble and tie it with a rope.

Finally, all that remains is to hang the ring from an alpine carabiner, fixed to the crossbar of a support or a thick tree branch. Your swing is ready!

Metal swings are also easy to make with your own hands.

First step. We cut blanks from pipes. You need to make 2 two-meter side posts, a 1.5-2-meter crossbar, and also 4 pipes of arbitrary size for the base (2 pipes will go on each side).

Second step. We clean the pipes from burrs using metal sandpaper or a file.

Third step. blanks for the base at right angles.

Fourth step. We weld the rack to the finished base, and then weld the crossbar to the racks.

How to install a crossbar on a metal swing

Fifth step. Let's start excavation work. You need to dig 4 holes with a depth of 80 cm.

Sixth step. We insert metal beams into the finished pits that are slightly longer than the depth of the pits.

Seventh step. Fill the recesses with beams with concrete mortar. You can make your own concrete from one part cement, one part crushed stone and two parts sand. Add water to the dry mixture and mix thoroughly until a homogeneous mass is obtained.

Eighth step. We leave the concrete to gain strength for about a week.

Ninth step. We weld the hooks to the crossbar. Anchors can be used to make hooks.

Tenth step. We weld the frame of the swing to the metal beams.

Eleventh step. We attach the seat.

At this point, the homemade metal swing is ready. You can test it and put it into permanent use.

Video - Do-it-yourself swing for a summer house

Video - DIY baby swing

At first glance, it seems that when creating paper crafts you can expect only the simplest result. Flat figure or applique. But, in today’s master class we will show you a very easy three-dimensional craft - a paper swing that will serve wonderful decoration yard near the toy house.

When creating a three-dimensional swing using the origami technique, only two square sheets of paper and finger dexterity will certainly come in handy. So let's get started!

Required materials:

two square sheets of different tones;
scissors.

Folding steps:

First we will make the legs of the swing. A square sheet of black paper is suitable for this. We bend it diagonally twice to obtain two fold lines.

Then we bend the right side halfway to the central vertical line.

We open it and use scissors to follow the new fold line to get a piece of paper from which we will fold one leg of the swing.

We bend the resulting segment in half. Let's reveal.

We bend the sides to a vertical line.

Next, bend the top and bottom sides to the central horizontal fold line.

Let's reveal. We bend the sides of the bottom half.

Make a fold down the line. Then we retreat 0.5 cm and bend the workpiece upward.

We divide the upper part of the workpiece into three parts. First fold the right side, and then the left into the right side. Carefully hide the bottom under the accordion.

Fold the corners towards the center.

In the upper part we will find the horizontal fold line, which was made at the sixth stage. Along it we bend part of the workpiece to the side. One swing leg is ready.

We cut off the same piece of paper from a square sheet and create a second leg for the swing. At the top, we insert an element of one leg into the other to get a strong and reliable base for the swing.

Now take a yellow square piece of paper and fold it twice.

Bend the right side in half.

We cut off this part to make a seat for the swing.

Fold it in half to get a vertical line.

Then you can bend the sides to the resulting line.

Bend the bottom part up to the horizontal line.

Open it up and create a small accordion.

We perform the same actions with the upper part of the workpiece as with the leg in the ninth stage. We create the second part for sitting. Bend the top parts to the side.

For kids preschool age you can come up with many entertaining activities, a special place among them is occupied by modeling from plasticine. Thanks to this type of creativity, parents will be able to instill in their child a love of creativity, develop imagination, imagination, and fine motor skills. In addition, by making figures from plasticine, the baby learns to be independent.

What to make

Before starting a lesson, every parent thinks about what can be made from plasticine. Imagine a little, imagine yourself as a child, think about what will interest your son or daughter most. Children's crafts may involve the use of many additional materials, which include: flowers, leaves, acorns, cones, and chestnuts.

Take note of what you can make from plasticine:

and birds. Interesting and funny hedgehogs, bunnies, and turtles will delight your little one. In addition, such plasticine crafts for children are made very quickly and simply.
Thematic figures. Undoubtedly, for every child it is a special, long-awaited event, because it is associated with toys and various gifts. Simple crafts made of plasticine in the form Christmas decorations, a snowman and, in fact, the Christmas tree itself will lift your spirits on the eve of the holiday.
Flowers. Mesmerizing compositions made with a child will look as if they were alive. Depending on the age of the baby, you can make flowers with a minimum number of details, as well as more complex volumetric compositions.
Trees. Having mastered easy crafts from plasticine, you can move on to more complex figures. Of course, a child will not be able to mold a tree on his own; he will need the help of an adult. But after taking a few steps in creating a craft, the child will be able to easily complete the job he started.
Vegetables, fruits, sweets. Even novice craftsmen will be able to master the process of creating miniatures of their favorite delicacies. Select the necessary colors of plasticine, then you can safely start creating.

Isn't it fun and interesting to make crafts from plasticine with your own hands? Let's get started with this exciting activity right now. Prepare plasticine, glass, cardboard and some available materials and you can start working. We will teach you how to make the most beautiful ones from colored plasticine. various crafts, such an activity for kids will be entertaining and will cause a lot of positive emotions. Well, let's get down to business?

Hedgehog

A small forest animal with thorns will end up right on your table. Even you can make a cute rodent small child. Modeling from plasticine for children is incredibly exciting fun.

How to make:

Kitten with a heart

On Valentine's Day, you can give not only valentines, but also original crafts. We recommend that you make a kitten from plasticine step by step according to the photo instructions provided.

Sculpting technique:

Turtle

Make a small plasticine craft with your child, with step by step instructions you will very quickly master the entire manufacturing process. A funny turtle will complement your collection of crafts.

How to sculpt:

Angry Birds

“Angry” birds are known to almost all children. Learn how to make such a craft from plasticine from our photo tutorial.

Sculpting process:

Rowan tree

Making a beautiful tree is very simple. This does not require spending too much time; the characteristic fruits will decorate the lush green foliage.

Features of creation:

Candies

Make lollipops from plasticine; the finished products cannot be distinguished from the real thing. The kids will definitely love this kind of fun.

How to do:

Bouquet of flowers

Give a touching gift for the holiday - a bouquet of roses. An original craft can be dedicated to the day.

How to make:

New Year's crafts

During the winter holidays, get your child interested in creating beautiful crafts from plasticine. You can place each molded figure on cardboard.

Snowman

This easy-to-make craft will truly decorate the interior of a child’s room; start making it together with your children.
Features of creating crafts:

Christmas tree decoration

Preparations for the New Year can begin with making original crafts, the whole family is guaranteed a festive mood.

Modeling stages:

Herringbone

Even from ordinary plasticine you can make the symbol of the New Year - a Christmas tree; from improvised means you will need scissors and a bamboo stick.

How to do:

And a few more interesting ideas for inspiration, crafts on paper/cardboard:

Maya the Bee is a cute little cartoon that all children simply adore. Watching an interesting series about a bee is very interesting, because the heroine is inquisitive and constantly in search of adventure. The kids will be interested in making Maya the bee from plasticine, and not just watching the cartoon. That's why parents should definitely show them an interesting master class on modeling. This sculpting guide is offered to help adult and young sculptors.

Plasticine colors for modeling:

yellow;
brown (orange);
blue;
black;
white.

How to make Maya the bee from plasticine

1. Prepare all the necessary colors of plasticine for work. IN in this case Only blue color is replaceable. The wings will be made from this block, and therefore it can be replaced with white, gray or beige.

2. Roll two yellow balls - blanks for the head and body of the cartoon. Maya's body should be quite well-fed.

3. Squeeze the bottom ball a little and fasten it to the second workpiece, placing a match inside.

4. Place eyes on the top ball.

5. Make a hairstyle using yellow sausages gathered in a bun.

6. Draw a stack of the heroine’s facial features: a smiling mouth and radiant wrinkles. Attach the nose.

7. To turn the lower part of the craft into the body of a bee, stick on longitudinal brown stripes. Pre-roll the pieces of plasticine into thin strips and, gluing them to the body, press them with your fingers.