With the start of the flu and cold season, parents often think about buying an inhaler to treat bronchitis, laryngitis and other respiratory tract diseases at home. But many are faced with the fact that the child does not want to inhale, screams and is capricious as soon as he sees a useful device. What to do in this case? Great option would be to purchase a nebulizer in the form of a bright toy that the baby will like and will help quickly cure the disease.
About the inhaler.
One of the most popular nebulizers for children is now locomotive inhaler B Well model WN-115K.
He is a cheerful yellow locomotive that - imagine - can even move with the help of wheels!
For little travel lovers, the inhaler set even includes stickers with animals that can be “put” in a steam locomotive - kids will surely love this idea.
An inhaler in the shape of a steam locomotive is a pretty good solution, because the steam emanating from the mask imitates the smoke of a train, and it looks more natural than an inhaler in the shape of a dolphin, for example.
Did the baby like this unit? More on this below.
Equipment B WELL WN-115K.
- "Body" of the device. This is a full-fledged toy with a painted face, a realistic interface and real wheels. If you wish, you can put on a whole show by rolling the vehicle around the table while it emits healing steam. On the roof of the locomotive there is a red power button and a hole for connecting a hose.
- Air hose. It is long enough (1.5 m) - you can move away from the device with a mask if the child is afraid of it.
- Spray. This is a kind of container where the medicine is poured. A hose and mask are attached to it on the other side.
- Mouthpiece (used from three years old) and 3 masks according to age. To supply medicinal steam into the respiratory tract.
- The kit also includes a set of filters, instructions and cute animal stickers.
- All components can be purchased separately in case of malfunction, but the cost of each part will be higher.
Where to buy a locomotive inhaler?
It is sold in almost any pharmacy, medical equipment and online stores. Depending on the place of purchase, the price varies from 2300 to 4000 rubles. If you want to buy an inhaler cheaply, look for devices “off the shelf” - they are usually in good condition, but come at a discount.
The technical characteristics of the inhaler are fully described in the instructions. We will not dwell on them in detail - they are standard for European nebulizers.
The only thing worth paying attention to is the size of the sprayed particles (the quality of the procedure depends on it) - from 0.5 - 5 microns: this is a very good indicator!
B Well inhaler: instructions for use.
- Before first use, be sure to disinfect all parts of the nebulizer. You can use, for example, an aqueous solution of chlorhexidine.
- Be sure to wipe down the locomotive itself - your baby will probably touch it with his hands!
- Place the inhaler so that it does not fall, it is convenient for you to hold the child and turn on the device. Be sure to check the cleanliness and integrity of each part - do not risk the baby’s health!
- To administer medication to the nebulizer, remove the cap by turning it counterclockwise. It is convenient to dose the solutions using a regular medical syringe without a needle - this way you will definitely not make a mistake with the dosage. You can take the medicine “by eye” (the maximum volume of the container is 13 ml) - but it is better to do everything exactly.
- After introducing the solution, put the cap on the sprayer and connect the hose to it from below and the mask from above. All manipulations should be performed only with the device turned off!
- The locomotive nebulizer is a fairly safe device. It is equipped with overheating protection and turns itself off after 30 minutes. But will you really inhale for 30 minutes?
Caring for your inhaler.
- Components must not be boiled.
- Do not wipe the masks and hose with napkins or a towel.
- To quickly dry the hose, turn on the device for 1 minute without medication.
- Do not neglect to replace the filter frequently.
- Wash with a special disinfectant, rinse for up to 30 minutes in a 1:3 vinegar-water solution.
- When storing the hose, do not twist or fold it.
How to do inhalation?
Why are inhalations prescribed?
- Relieving bronchospasm.
- Relief from dry and wet cough.
- Treatment of a runny nose.
- Liquefies mucus and removes phlegm.
- Relief from nasal congestion.
- Accelerate recovery and minimize complications.
Contraindications for inhalation.
- Respiratory failure 3rd degree.
- Pneumothorax.
- Low-grade and febrile temperature (from 37.6 C).
- Cardiovascular diseases, high blood pressure.
- Nosebleeds.
How to give inhalation to a child: rules.
- The procedure is best done in a sitting position. If the baby does not yet know how to sit, give him a semi-sitting position in your arms.
- Before and after inhalation, exclude the child from physical activity (outdoor games, running around the apartment).
- The manipulation should be carried out thirty minutes before or after a meal.
- Medicines in the nebulizer must be dosed strictly as prescribed by the doctor.
- If a child has a high fever, vomiting, or headache, it is better not to use a nebulizer.
If the child screams, turns his head and is, in principle, against the procedure, there is no need to force it.
Basic questions.
How many days can you do inhalation?
The duration of the course can be from 5 to 10 days as prescribed by the doctor.
How many times a day can it be done?
No more than 5 times a day.
From what age?
From 0 months.
Is it possible to inhale with saline solution?
It is possible and necessary. Can also be used mineral water, Ringer's solution.
Is it possible to do inhalation at a temperature?
You should not perform the procedure if you have a fever above 37.7 C.
Is it possible to do inhalation for pregnant women?
It is possible in the absence of the following contraindications.
And, finally, the most important thing, why we have gathered in this article: will a nebulizer in the form of a train help introduce a baby to such a useful and necessary procedure?
Despite the cheerful design and attention to detail, kids are scared by the loud sound of the device, the mask that is put on their face, the steam...
So is it worth buying such a sophisticated gadget to bring joy to your child? I think not.
Perhaps children from 3 years old will enjoy this game, but infants do not care what shape the inhaler is. Personally, my child now really doesn’t like steam locomotives...
The compressor inhaler (nebulizer) WN-115K has an original bright design that is attractive to children. When creating it, the manufacturer made sure that the treatment procedure was not only comfortable, but also interesting for the little patient. The device looks more like a toy than a medical device. The procedure carried out with the help of this inhaler will not frighten or upset the child, but will rather entertain him. The design was not chosen by the developers by chance. The sound produced by the nebulizer really reminds a child of the noise of a steam locomotive.
This design is also used by other manufacturers, in particular, the children's inhaler “Health Engine” AMNB-502, which has a blue color, is presented on the market.
Nebulizer “Locomotive”
The inhaler from the manufacturer B. Well WN 115K is a medical device, its use is possible only as prescribed by a doctor. The safety and effectiveness of the procedures are guaranteed by the reliability and high quality of the materials from which it is made.
Completeness
To increase safety, before using the inhaler, you should carefully read the instructions for use. You should also keep it throughout the entire service life of the device.
In accordance with the instructions for use, the Parovozik compressor inhaler is intended only for inhalation therapy. The manufacturer is not responsible for any damage resulting from using the device for other purposes than intended.
The WN-115K compressor inhaler can use any drug from the list of drugs recommended for nebulizer therapy.
The dosage of the drug should be carried out in strict accordance with the recommendations of the attending physician.
The mechanism of action of the medical device is based on the dispersion of the medicinal solution. The medicine introduced into the body in an aerosol state quickly reaches all parts of the respiratory tract where its effect is necessary. Thanks to the very fine spray (size less than 4 microns), the particles of the medicinal solution reach both the upper and lower respiratory tract.
Preparation for use
To safely carry out the inhalation procedure, it is important to assemble the device correctly.
Step-by-step instructions for preparing the nebulizer for use:
- 1. Remove the lid of the medicine container nebulizer. To do this, you need to turn it counterclockwise and then pull it up.
- 2. From 2 to 13 ml of medicinal solution should be poured into the medicine container (to facilitate dosing, you can use the scale on the wall). If it was stored in the refrigerator, then before use it should be heated to a temperature of 16 - 20 degrees, since the temperature of the inhaled aerosol will depend on this.
- 3. Put on the sprayer cap. To do this, you should align it with the container so that the protrusions on it coincide with the recesses on the chamber. Turn the lid clockwise.
- 4. Connect the air supply hose to the compressor air tube connector.
- 5. Connect the free end of the air hose to the spray tube. At this stage, it is necessary to ensure the tightness and reliability of the connection to avoid air leaks. When connecting the air hose, the nebulizer should be held strictly vertically so as not to spill the medicinal solution.
- 6. Attach the mouthpiece or mask to the nebulizer.
- 7. Before connecting the device to the electrical network, you must make sure that the switch is in position 0, that is, the device is turned off. After this, insert the power cord plug into the outlet.
Before using the inhalation device, you must:
- Make sure that all parts and components are connected properly.
- Check that the air filter is inside the filter cover.
- Make sure it is clean (it must be replaced if it has changed color or has been used for a long time).
The algorithm for replacing the air filter is presented in the corresponding section below.
Progress of the procedure
Children should only use the inhaler under adult supervision.
The nebulizer should be held strictly vertically or tilted no more than 45 degrees throughout the inhalation procedure. With a stronger tilt, the medicinal solution may flow into the mouth and respiratory tract.
To start the procedure, turn on the device. The spraying of the medicinal solution begins immediately. The inhalation procedure should be carried out in the mode prescribed by the attending physician.
For the treatment of lower respiratory tract diseases in adults and children over 5 years of age, it is recommended to use a special mouthpiece to improve aerosol penetration.
If it is necessary to treat diseases of the upper respiratory tract, a mask is used, which allows you to evenly irrigate the mucous membrane of the entire nasal cavity, pharynx, larynx and trachea. Children aged one to three years should use a child's mask, and children under one year old should use a small one. You need to wear it in such a way that it covers your nose and mouth.
A properly worn nebulizer mask covers the nose and mouth.
After the time allotted for the procedure has passed, the power to the nebulizer should be turned off using a special switch.
During inhalation, condensation may form in the air pipe. In this case, you should disconnect the sprayer, turn on the compressor and dry the tube until the liquid completely disappears. Do not store the air hose with condensation remaining inside. This can lead to infection multiplying on its walls.
After drying the hose, the device should be unplugged from the electrical outlet. After the procedure, rinse your mouth with boiled water at room temperature, and if inhalation was carried out using a mask, rinse your face and eyes with water.
The Steam Locomotive nebulizer can operate for 30 minutes, after which you need to take a break (about half an hour) to allow the device to cool down.
If the compressor starts to overheat, the device automatically turns off, as it is equipped with an overheat protection function. If this occurs, manually turn off the appliance, then unplug the AC power cord and allow it to cool for 30 minutes.
Replacing the air filter
The nebulizer air filter must be replaced if it is dirty or mechanically damaged. Step by step instructions:
- 1. Turn the air filter cover counterclockwise.
- 2. Remove the camera from the device by pulling it up.
- 3. Remove the air filter using tweezers and install a new one in its place.
- 4. Return the chamber to its place, aligning the protrusions on the filter cover with the grooves in the device body.
- 5. Rotate the cover clockwise to secure it.
To work with a compressor inhaler, you should use filters designed specifically for this device - original ones, manufactured by the same manufacturer. Otherwise, there is a possibility that the machine may malfunction. You cannot turn on the device without a filter. It is not recommended to wash or clean it. A wet filter must be replaced.
Precautions
When using a compressor inhaler, the following substances are prohibited:
- aromatic mixtures;
- solutions prepared using oils (including essential oils);
- any mixtures containing suspended particles (decoctions, suspensions, infusions);
- substances that are easily flammable when in contact with air, nitrous oxide or oxygen;
- expired medicinal solutions.
In addition, the following precautions must be observed when using a compressor nebulizer:
- The same components should not be used for inhalation in different patients.
- Before first use or after long-term storage of components, they must be thoroughly washed and disinfected.
- All parts should be cleaned and disinfected after each inhalation session. You cannot boil them.
- Do not leave cleaning solution in the tube, mouthpiece or chamber.
- Nebulizer parts should not be dried in a microwave oven or other household appliances.
- The inhalation device should not be covered with a blanket or towel, and the ventilation openings should always be open.
- Since small parts can be dangerous for a child, the device must be stored out of reach of the child.
- Do not pour more than 13 ml of medicinal solution.
- Avoid tilting the nebulizer more than 45 degrees and kinking the air hose (including when storing the nebulizer).
- The device is not protected from liquid penetration inside. Therefore, you should not touch it with wet hands, immerse it in water or store it in a room with high humidity.
- Before use, you must ensure the integrity of the electrical cord and the device casing.
- Operating the device if damaged is prohibited.
- Repairs to the device should only be carried out by technical service centers recommended by the manufacturer.
The compressor inhaler (nebulizer) WN-115K has an original bright design that is attractive to children. When creating it, the manufacturer made sure that the treatment procedure was not only comfortable, but also interesting for the little patient. The device looks more like a toy than a medical device. The procedure carried out with the help of this inhaler will not frighten or upset the child, but will rather entertain him. The design was not chosen by the developers by chance. The sound produced by the nebulizer really reminds a child of the noise of a steam locomotive.
This design is also used by other manufacturers, in particular, the children's inhaler “Health Engine” AMNB-502, which has a blue color, is presented on the market.
Nebulizer “Locomotive”
The inhaler from the manufacturer B. Well WN 115K is a medical device, its use is possible only as prescribed by a doctor. The safety and effectiveness of the procedures are guaranteed by the reliability and high quality of the materials from which it is made.
Completeness
To increase safety, before using the inhaler, you should carefully read the instructions for use. You should also keep it throughout the entire service life of the device.
In accordance with the instructions for use, the Parovozik compressor inhaler is intended only for inhalation therapy. The manufacturer is not responsible for any damage resulting from using the device for other purposes than intended.
The WN-115K compressor inhaler can use any drug from the list of drugs recommended for nebulizer therapy.
The dosage of the drug should be carried out in strict accordance with the recommendations of the attending physician.
The mechanism of action of the medical device is based on the dispersion of the medicinal solution. The medicine introduced into the body in an aerosol state quickly reaches all parts of the respiratory tract where its effect is necessary. Thanks to the very fine spray (size less than 4 microns), the particles of the medicinal solution reach both the upper and lower respiratory tract.
Preparation for use
To safely carry out the inhalation procedure, it is important to assemble the device correctly.
Step-by-step instructions for preparing the nebulizer for use:
- 1. Remove the lid of the medicine container nebulizer. To do this, you need to turn it counterclockwise and then pull it up.
- 2. From 2 to 13 ml of medicinal solution should be poured into the medicine container (to facilitate dosing, you can use the scale on the wall). If it was stored in the refrigerator, then before use it should be heated to a temperature of 16 - 20 degrees, since the temperature of the inhaled aerosol will depend on this.
- 3. Put on the sprayer cap. To do this, you should align it with the container so that the protrusions on it coincide with the recesses on the chamber. Turn the lid clockwise.
- 4. Connect the air supply hose to the compressor air tube connector.
- 5. Connect the free end of the air hose to the spray tube. At this stage, it is necessary to ensure the tightness and reliability of the connection to avoid air leaks. When connecting the air hose, the nebulizer should be held strictly vertically so as not to spill the medicinal solution.
- 6. Attach the mouthpiece or mask to the nebulizer.
- 7. Before connecting the device to the electrical network, you must make sure that the switch is in position 0, that is, the device is turned off. After this, insert the power cord plug into the outlet.
Before using the inhalation device, you must:
- Make sure that all parts and components are connected properly.
- Check that the air filter is inside the filter cover.
- Make sure it is clean (it must be replaced if it has changed color or has been used for a long time).
The algorithm for replacing the air filter is presented in the corresponding section below.
Progress of the procedure
Children should only use the inhaler under adult supervision.
The nebulizer should be held strictly vertically or tilted no more than 45 degrees throughout the inhalation procedure. With a stronger tilt, the medicinal solution may flow into the mouth and respiratory tract.
To start the procedure, turn on the device. The spraying of the medicinal solution begins immediately. The inhalation procedure should be carried out in the mode prescribed by the attending physician.
For the treatment of lower respiratory tract diseases in adults and children over 5 years of age, it is recommended to use a special mouthpiece to improve aerosol penetration.
If it is necessary to treat diseases of the upper respiratory tract, a mask is used, which allows you to evenly irrigate the mucous membrane of the entire nasal cavity, pharynx, larynx and trachea. Children aged one to three years should use a child's mask, and children under one year old should use a small one. You need to wear it in such a way that it covers your nose and mouth.
A properly worn nebulizer mask covers the nose and mouth.
After the time allotted for the procedure has passed, the power to the nebulizer should be turned off using a special switch.
During inhalation, condensation may form in the air pipe. In this case, you should disconnect the sprayer, turn on the compressor and dry the tube until the liquid completely disappears. Do not store the air hose with condensation remaining inside. This can lead to infection multiplying on its walls.
After drying the hose, the device should be unplugged from the electrical outlet. After the procedure, rinse your mouth with boiled water at room temperature, and if inhalation was carried out using a mask, rinse your face and eyes with water.
The Steam Locomotive nebulizer can operate for 30 minutes, after which you need to take a break (about half an hour) to allow the device to cool down.
If the compressor starts to overheat, the device automatically turns off, as it is equipped with an overheat protection function. If this occurs, manually turn off the appliance, then unplug the AC power cord and allow it to cool for 30 minutes.
Replacing the air filter
The nebulizer air filter must be replaced if it is dirty or mechanically damaged. Step by step instructions:
- 1. Turn the air filter cover counterclockwise.
- 2. Remove the camera from the device by pulling it up.
- 3. Remove the air filter using tweezers and install a new one in its place.
- 4. Return the chamber to its place, aligning the protrusions on the filter cover with the grooves in the device body.
- 5. Rotate the cover clockwise to secure it.
To work with a compressor inhaler, you should use filters designed specifically for this device - original ones, manufactured by the same manufacturer. Otherwise, there is a possibility that the machine may malfunction. You cannot turn on the device without a filter. It is not recommended to wash or clean it. A wet filter must be replaced.
Precautions
When using a compressor inhaler, the following substances are prohibited:
- aromatic mixtures;
- solutions prepared using oils (including essential oils);
- any mixtures containing suspended particles (decoctions, suspensions, infusions);
- substances that are easily flammable when in contact with air, nitrous oxide or oxygen;
- expired medicinal solutions.
In addition, the following precautions must be observed when using a compressor nebulizer:
- The same components should not be used for inhalation in different patients.
- Before first use or after long-term storage of components, they must be thoroughly washed and disinfected.
- All parts should be cleaned and disinfected after each inhalation session. You cannot boil them.
- Do not leave cleaning solution in the tube, mouthpiece or chamber.
- Nebulizer parts should not be dried in a microwave oven or other household appliances.
- The inhalation device should not be covered with a blanket or towel, and the ventilation openings should always be open.
- Since small parts can be dangerous for a child, the device must be stored out of reach of the child.
- Do not pour more than 13 ml of medicinal solution.
- Avoid tilting the nebulizer more than 45 degrees and kinking the air hose (including when storing the nebulizer).
- The device is not protected from liquid penetration inside. Therefore, you should not touch it with wet hands, immerse it in water or store it in a room with high humidity.
- Before use, you must ensure the integrity of the electrical cord and the device casing.
- Operating the device if damaged is prohibited.
- Repairs to the device should only be carried out by technical service centers recommended by the manufacturer.
Children's nebulizer B .WELL WN-115K LOGO is very effective. He attracts any child and reliably treats respiratory diseases at any stage.
Very unusual model nebulizer. It is used at home and is perceived by children as a toy. The manufacturers of the B.WELL WN-115K company turned out to be more advanced, having created a nebulizer in the form of a train, they saved adults from the unpleasant procedure of persuasion. After all, not every child can easily sit during steam treatment. The image of a train greatly facilitated this difficult task. After all, the noise that comes from the nebulizer, the mask on the face, the taste of medicines inside - all this can bring the baby to tears, and sometimes even to hysterics.
The engineers thought through everything to the smallest detail, creating a nebulizer model in the form of a train. After all, it also makes noise. However, the sound was transformed into a real steam locomotive hum.
Benefits and Features
The characteristics of the steam locomotive nebulizer are no worse than other models. Even though appearance Quite insignificant, it also works continuously for thirty to forty minutes. The model is used by both children and adults; with its help, the upper and lower respiratory tract are wonderfully irrigated. Control is performed with a single button. The set includes three different masks. We recommend that everyone purchase a Parovozik nebulizer for their baby. loving parents! Buy children's nebulizer B.WELL WN-115K STEAM LOT – and live without worries! If there are small children in the house, it is simply irreplaceable!
The nebulizer nebulizes the medicine using a low-frequency method. That is, the medicine reaches the source of the disease even without exposure to high temperatures. Such a device does not produce steam, it converts medicinal product into an aerosol, which in turn is able to reach the farthest corners of the lungs and there influence the process of inflammation. And all this in 10 minutes of working time.
Children's nebulizer Locomotive should not be used to treat a patient whose temperature is above 37 and 5 degrees.
The set of this nebulizer model includes: a sprayer, a hose, a mouthpiece, masks, air filters, a coupon, operation and instructions for it. When inhaling with such an interesting nebulizer, you can use not only solutions, but also various infusions of medicinal herbs and essential oils.
The nebulizer kit comes with three masks of different sizes. One of them is an adult. One mask is intended for newborns and children up to one year old. The third mask is for older children. So the nebulizer can be used from birth without any consequences or complications.
Technical characteristics of B.WELL WN-115K LOGO
| Size | 124/140/240 |
| Weight | 1.5 kg. |
| Nutrition | from mains, 50 Hz, 220 V. |
| Hose length | 1.5 m. |
| Performance | 0.33 ml per minute |
| Airflow | 8.5 l per minute |
| Medicine tank volume | 10 ml. |
| Aerosol particle size | 5µm. |
| Operating humidity | from thirty to ninety five percent |
| Maximum pressure | 2.3 kg/sq. cm. |
| Current strength | 0.6 ampere |
| Spray method | piston compressor |
| Operating temperature | from five to forty degrees Celsius |
| Pressure range during storage and transportation | from five hundred to one thousand sixty ml/bar. |
| Form | little train |
Equipment
- Compressor block;
- Masks - 2 pcs (children, adults);
- Nozzle for the oral cavity;
- Filter - 3 pcs.;
- Air supply hose;
- Russian-language instructions.
Instructions for use
Inhaler b well pro-115 compressor locomotive instructions for use
Compound
Equipment:
1. Medical inhaler (compressor nebulizer)
2. Sprayer “Basic” 2-8 ml
3. Air hose 1.8m
4. Mouthpiece
5. Mask for an adult
6. Children's mask
7. Infant mask
8. Set of filters (5 pcs)
9. Storage bag
10. Stickers
11. Operating manual and warranty card
Description
Medical devices of the PRO line are easy to use, while they professionally and efficiently perform all the necessary functions for the prevention, treatment and monitoring of the health of your loved ones.
Compressor nebulizer(medical inhaler) B.Well PRO-115 - Nebulizer toy! Effective and safe treatment!
Compressor nebulizer B.Well PRO-115 is a safe and effective treatment for your baby. The little train sparks interest and turns treatment into a game!
The updated Locomotive is a device with increased medical effectiveness and improved characteristics.
An improved compressor, a new generation sprayer, and a reduced noise level make this device a mother’s favorite and convenient for the whole family.
The modern “Basic” nebulizer generates an aerosol cloud with a large number of therapeutic particles (> 70%) and a small average particle size (MMAD ~ 3.16 µm). This allows the medicine in maximum quantities to penetrate deeply into the lungs for a quick recovery.
Air from the environment passes through the open holes in the atomizer cap and combines with the air coming from the compressor, thereby increasing the nebulization speed and reducing inhalation time
The Basic Sprayer can be boiled for disinfection and easy cleaning.
The PRO-115 nebulizer has two masks included and is suitable for adults and children. A reliable new generation compressor for the whole family.
Key Features:
1) Nebulizer toy: arouses interest and turns treatment into a game!
2) Effective therapy of the lower respiratory tract with the modern “Basic” nebulizer:
Average particle size (MMAD) ~ 3.16 microns
High % of respirable fraction (particles less than 5 microns) > 70%
3) Three masks included - comfortable for all family members from birth
4) Reliable compressor for long service life
5) Reduced noise level
6) Atomizer holder for easy use
7) A nose piece will help cure a runny nose.
8) Medical effectiveness in accordance with European standard EN13544 for nebulizers
Specifications:
Operating voltage: 230V, 50Hz, 1A
Maximum pressure: 2.2 bar
Noise level: 54 dB
PRO-115 weight: 1,510 kg. (without accessories) 1.786 kg. (in a box with accessories)
Dimensions (L x W x H): 224 x 112 x 170 mm
Operating mode: 30 min on / 30 min rest
Spray rate: 0.4ml/min
Sprayer "Basic":
Atomizer capacity: 2-8ml
Particle size (MMAD): ~3.16 microns
Respirable fraction (% particles<5 микрон) более 70%
Residual volume of spray chamber: 1 ml
Application conditions: Temperature: MIN +10 °C - MAX +40 °C
Storage conditions: Temperature: MIN -25 °C – MAX +70 °C
Humidity: MIN 10% RH – MAX 95% RH
Atmospheric pressure: 700 hPa – 1060 hPa
Free service – 10 years
Warranty - 5 years
Compressor nebulizer (medical inhaler) B.Well PRO-115
Selling Features
Without a license
Special conditions
Developed and tested by B.Well Swiss AG, Switzerland
The B.Well Swiss control system ensures careful monitoring of all production processes, which guarantees high quality, durability and safety of the entire family of B.Well products.
ATTENTION
Please follow safety precautions when using your inhaler.
This device should only be used for its intended purpose, as described in the manual, and with medications only under the supervision and instructions of a physician.
Do not use the device for anesthesia or ventilation.
Maintenance and repair
The device does not have internal parts that the user can repair himself; the internal parts do not require maintenance or lubrication.
Indications
The inhaler is intended for use by adult patients and children (an adult and a child mask are included in the kit) who have indications for treatment with medicinal aerosols.
The compressor inhaler is intended for the treatment and prevention of acute and chronic diseases of the upper and lower respiratory tract
Contraindications
It is strictly forbidden to use the following as drugs for nebulizer therapy:
Substances and solutions containing suspended particles (decoctions, suspensions, infusions, etc.). Suspended particles are much larger than particles of the respirable fraction. Using them in a nebulizer may be harmful to health;
Flammable anesthetic mixtures that ignite easily on contact with air, oxygen and nitrous oxide;
Aromatic substances.
Directions for use
Dosage
Please consult your doctor and/or pharmacist to determine if your medication is approved for this inhaler.Follow your doctor or healthcare provider's instructions when choosing the type, dose, and regimen of treatment.
Keep the sprayer strictly vertical.
ATTENTION! Do not tilt the sprayer more than 45 degrees.
If the inclination angle is greater than 45 degrees, no aerosol will be generated.
Press the switch so that it is in position I. The compressor will turn on and spraying will begin.
Carry out inhalation in accordance with the instructions of your doctor.
Use attachments prescribed by your doctor.
ATTENTION! The temperature of the inhaled aerosol depends on the ambient temperature and the temperature of the drug solution.
If the solution was stored in the refrigerator, it is recommended to bring it to a temperature of 16-20C° before use.
Using the mouthpiece:
Place the mouthpiece in your mouth and breathe evenly while inhaling.
For the treatment of the lower respiratory tract in adults and children over 5 years of age, it is recommended to use a mouthpiece.
Using masks:
Wear the mask so that it covers your nose and mouth and inhale the medicine. Inhale and exhale through the mask.
For children under 1 year old - infant.
After completing inhalation, turn off the device by moving the switch to the “O” position and disconnect the device from the power supply.
Clean the nebulizer and accessories according to paragraph “9.Cleaning, care and storage” (see manual)
Condensation may form in the air hose.
If it appears, disconnect the air hose from the sprayer, turn on the compressor and dry the air hose until the liquid is removed.
ATTENTION! Do not store the air hose if there is condensation or moisture remaining in it. This can lead to a bacterial infection.
Unplug the device from the electrical outlet.
After the procedure, you need to rinse your mouth with boiled water at room temperature, and if you used a mask, rinse your eyes and face with water.
ATTENTION! The device can operate for 30 minutes without interruption, after which it must be allowed to cool for 30 minutes.
